[openwrt/openwrt] octeon: create shared DTSI for Ubiquiti E300 platform
LEDE Commits
lede-commits at lists.infradead.org
Sun May 16 16:01:43 PDT 2021
adrian pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/8e7c9f5393e6c96a9c13da0f5b407a6912523e77
commit 8e7c9f5393e6c96a9c13da0f5b407a6912523e77
Author: Dan Brown <danbrown at gmail.com>
AuthorDate: Sat May 15 23:40:50 2021 +0200
octeon: create shared DTSI for Ubiquiti E300 platform
EdgeRouter 4 and upcoming EdgeRouter 6P and 12 have similar setup,
so create a shared DTSI to prevent duplicate code.
Signed-off-by: Dan Brown <danbrown at gmail.com>
[reorder/squash commits, add description, move ethernet at 0 to DTS]
Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
---
.../dts/cavium-octeon/cn7130_ubnt_edgerouter-4.dts | 195 +--------------------
...uter-4.dts => cn7130_ubnt_edgerouter-e300.dtsi} | 12 +-
2 files changed, 3 insertions(+), 204 deletions(-)
diff --git a/target/linux/octeon/files/arch/mips/boot/dts/cavium-octeon/cn7130_ubnt_edgerouter-4.dts b/target/linux/octeon/files/arch/mips/boot/dts/cavium-octeon/cn7130_ubnt_edgerouter-4.dts
index a89455c613..d8dabfc370 100644
--- a/target/linux/octeon/files/arch/mips/boot/dts/cavium-octeon/cn7130_ubnt_edgerouter-4.dts
+++ b/target/linux/octeon/files/arch/mips/boot/dts/cavium-octeon/cn7130_ubnt_edgerouter-4.dts
@@ -1,180 +1,14 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include "cn71xx.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "cn7130_ubnt_edgerouter-e300.dtsi"
/ {
compatible = "ubnt,edgerouter-4", "cavium,cn7130";
model = "Ubiquiti EdgeRouter 4";
-
- aliases {
- /* White + Blinking Blue */
- led-boot = &led_power_white;
- /* Blue + Blinking White */
- led-failsafe = &led_power_blue;
- /* Constant Blue */
- led-running = &led_power_blue;
- /* Blue + Blinking White */
- led-upgrade = &led_power_blue;
- };
-
- memory at 0 {
- device_type = "memory";
- reg = <0x0 0x00000000>,
- <0x0 0x10000000>,
- <0x0 0x20000000>,
- <0x0 0x30000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power_blue: power_blue {
- label = "blue:power";
- gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
- };
-
- led_power_white: power_white {
- label = "white:power";
- gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
- };
-
- sfp: sfp {
- compatible = "sff,sfp";
- i2c-bus = <&twsi0>;
- /* Pins 12, 13 and 14 gets pulled low when SFP is plugged in */
- mod-def0-gpio = <&gpio 12 GPIO_ACTIVE_LOW>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-};
-
-&xhci0 {
- status = "okay";
- dr_mode = "host";
-};
-
-&twsi0 {
- status = "okay";
-
- sfp_eeprom at 50 {
- compatible = "at,24c04";
- reg = <0x50>;
- };
-
- sfp_eeprom at 51 {
- compatible = "at,24c04";
- reg = <0x51>;
- };
-};
-
-&spi {
- status = "okay";
-
- flash at 0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "Macronix,mx25l6405d", "spi-flash";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partition at 0 {
- label = "boot0";
- read-only;
- reg = <0x000000 0x300000>;
- };
-
- partition at 300000 {
- label = "dummy";
- read-only;
- reg = <0x300000 0x100000>;
- };
-
- eeprom: partition at 400000 {
- label = "eeprom";
- read-only;
- reg = <0x400000 0x10000>;
- };
- };
-};
-
-&mmc {
- status = "okay";
-
- mmc-slot at 0 {
- compatible = "mmc-slot";
- reg = <0>;
- non-removable;
- max-frequency = <26000000>;
- voltage-ranges = <3300 3300>;
- bus-width = <8>;
- };
-};
-
-&smi0 {
- status = "okay";
-
- phy4: ethernet-phy at 4 {
- device_type = "ethernet-phy";
- interrupts = <17 8>;
- interrupt-parent = <&gpio>;
- compatible = "vitesse,vsc8504", "ethernet-phy-ieee802.3-c22";
- reg = <4>;
- sfp = <&sfp>;
- };
-
- phy5: ethernet-phy at 5 {
- device_type = "ethernet-phy";
- interrupts = <17 8>;
- interrupt-parent = <&gpio>;
- compatible = "vitesse,vsc8504", "ethernet-phy-ieee802.3-c22";
- reg = <5>;
- };
-
- phy6: ethernet-phy at 6 {
- device_type = "ethernet-phy";
- interrupts = <17 8>;
- interrupt-parent = <&gpio>;
- compatible = "vitesse,vsc8504", "ethernet-phy-ieee802.3-c22";
- reg = <6>;
- };
-
- phy7: ethernet-phy at 7 {
- device_type = "ethernet-phy";
- interrupts = <17 8>;
- interrupt-parent = <&gpio>;
- compatible = "vitesse,vsc8504", "ethernet-phy-ieee802.3-c22";
- reg = <7>;
- };
};
&pip {
- status = "okay";
-
interface at 0 {
- status = "okay";
-
ethernet at 0 {
label = "lan3";
status = "okay";
@@ -182,32 +16,5 @@
phy-handle = <&phy4>;
mtd-mac-address = <&eeprom 0>;
};
-
- ethernet at 1 {
- label = "lan0";
- status = "okay";
- phy-mode = "sgmii";
- phy-handle = <&phy5>;
- mtd-mac-address = <&eeprom 0>;
- mtd-mac-address-increment = <(1)>;
- };
-
- ethernet at 2 {
- label = "lan1";
- status = "okay";
- phy-mode = "sgmii";
- phy-handle = <&phy6>;
- mtd-mac-address = <&eeprom 0>;
- mtd-mac-address-increment = <(2)>;
- };
-
- ethernet at 3 {
- label = "lan2";
- status = "okay";
- phy-mode = "sgmii";
- phy-handle = <&phy7>;
- mtd-mac-address = <&eeprom 0>;
- mtd-mac-address-increment = <(3)>;
- };
};
};
diff --git a/target/linux/octeon/files/arch/mips/boot/dts/cavium-octeon/cn7130_ubnt_edgerouter-4.dts b/target/linux/octeon/files/arch/mips/boot/dts/cavium-octeon/cn7130_ubnt_edgerouter-e300.dtsi
similarity index 93%
copy from target/linux/octeon/files/arch/mips/boot/dts/cavium-octeon/cn7130_ubnt_edgerouter-4.dts
copy to target/linux/octeon/files/arch/mips/boot/dts/cavium-octeon/cn7130_ubnt_edgerouter-e300.dtsi
index a89455c613..7d4c7f0de9 100644
--- a/target/linux/octeon/files/arch/mips/boot/dts/cavium-octeon/cn7130_ubnt_edgerouter-4.dts
+++ b/target/linux/octeon/files/arch/mips/boot/dts/cavium-octeon/cn7130_ubnt_edgerouter-e300.dtsi
@@ -6,8 +6,8 @@
#include <dt-bindings/input/input.h>
/ {
- compatible = "ubnt,edgerouter-4", "cavium,cn7130";
- model = "Ubiquiti EdgeRouter 4";
+ compatible = "ubnt,edgerouter-e300", "cavium,cn7130";
+ model = "Ubiquiti EdgeRouter E300 series";
aliases {
/* White + Blinking Blue */
@@ -175,14 +175,6 @@
interface at 0 {
status = "okay";
- ethernet at 0 {
- label = "lan3";
- status = "okay";
- phy-mode = "sgmii";
- phy-handle = <&phy4>;
- mtd-mac-address = <&eeprom 0>;
- };
-
ethernet at 1 {
label = "lan0";
status = "okay";
More information about the lede-commits
mailing list