[openwrt/openwrt] ath79: add support for COMFAST CF-E375AC
LEDE Commits
lede-commits at lists.infradead.org
Sun May 16 16:01:45 PDT 2021
adrian pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/4f07966696134b270e821246c8fd4624c238f1f6
commit 4f07966696134b270e821246c8fd4624c238f1f6
Author: Joao Henrique Albuquerque <joaohccalbu at gmail.com>
AuthorDate: Fri Aug 14 12:04:02 2020 -0300
ath79: add support for COMFAST CF-E375AC
COMFAST CF-E375AC is a ceiling mount AP with PoE support,
based on Qualcomm/Atheros QCA9563 + QCA9886 + QCA8337.
Short specification:
2x 10/100/1000 Mbps Ethernet, with PoE support
128MB of RAM (DDR2)
16 MB of FLASH
3T3R 2.4 GHz, 802.11b/g/n
2T2R 5 GHz, 802.11ac/n/a, wave 2
built-in 5x 3 dBi antennas
output power (max): 500 mW (27 dBm)
1x RGB LED, 1x button
built-in watchdog chipset
Flash instruction:
1) Original firmware is based on OpenWrt.
Use sysupgrade image directly in vendor GUI.
2) TFTP
2.1) Set a tftp server on your machine with a fixed IP address of
192.168.1.10. A place the sysupgrade as firmware_auto.bin.
2.2) boot the device with an ethernet connection on fixed ip route
2.3) wait a few seconds and try to login via ssh
3) TFTP trough Bootloader
3.1) open the device case and get a uart connection working
3.2) stop the autoboot process and test connection with serverip
3.3) name the sysupgrade image firmware.bin and run firmware_upg
MAC addresses:
Though the OEM firmware has four adresses in the usual locations,
it appears that the assigned addresses are just incremented in a
different way:
interface address location
LAN: *:DC 0x0
WAN *:DD 0x1002
WLAN 2.4g *:E6 n/a (0x0 + 10)
WLAN 5g *:DE 0x6
unused *:DF 0x5006
The MAC address pointed at the label is the one assign to the LAN
interface.
Signed-off-by: Joao Henrique Albuquerque <joaohccalbu at gmail.com>
[add label-mac-device, remove redundant uart status, fix whitespace
issues, fix commit message wrapping, remove x bit on DTS file]
Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
---
.../linux/ath79/dts/qca9563_comfast_cf-e375ac.dts | 137 +++++++++++++++++++++
.../ath79/generic/base-files/etc/board.d/01_leds | 4 +
.../generic/base-files/etc/board.d/02_network | 7 ++
.../etc/hotplug.d/firmware/11-ath10k-caldata | 1 +
target/linux/ath79/image/generic.mk | 10 ++
5 files changed, 159 insertions(+)
diff --git a/target/linux/ath79/dts/qca9563_comfast_cf-e375ac.dts b/target/linux/ath79/dts/qca9563_comfast_cf-e375ac.dts
new file mode 100644
index 0000000000..1eeb02f7f9
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_comfast_cf-e375ac.dts
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "COMFAST CF-E375AC";
+ compatible = "comfast,cf-e375ac", "qca,qca9563";
+
+ aliases {
+ label-mac-device = ð0;
+ led-boot = &led_lan;
+ led-failsafe = &led_lan;
+ led-running = &led_lan;
+ led-upgrade = &led_lan;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_lan: lan {
+ label = "green:lan";
+ gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan {
+ label = "red:wan";
+ gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan2g {
+ label = "blue:wlan2g";
+ gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ watchdog {
+ compatible = "linux,wdt-gpio";
+
+ gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
+ hw_algo = "toggle";
+ hw_margin_ms = <500>;
+ always-running;
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ art: partition at 40000 {
+ label = "art";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ partition at 50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0xfa0000>;
+ };
+
+ partition at ff0000 {
+ label = "art-backup";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy at 0 {
+ reg = <0>;
+ phy-mode = "sgmii";
+ qca,mib-poll-interval = <500>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x03000101 0x00000101 0x00001919>;
+
+ phy-mode = "sgmii";
+ mtd-mac-address = <&art 0x0>;
+ phy-handle = <&phy0>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <10>;
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index 783b55ec32..827055bc1f 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -132,6 +132,10 @@ comfast,cf-e314n-v2)
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "green:rssimediumhigh" "wlan0" "51" "100"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:rssihigh" "wlan0" "76" "100"
;;
+comfast,cf-e375ac)
+ ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x04"
+ ucidef_set_led_switch "wan" "WAN" "red:wan" "switch0" "0x02"
+ ;;
comfast,cf-e5)
ucidef_set_led_switch "lan" "LAN" "blue:lan" "switch0" "0x02"
ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 52e773fea3..4133b9d7d3 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -186,6 +186,10 @@ ath79_setup_interfaces()
ubnt,routerstation)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
+ comfast,cf-e375ac)
+ ucidef_add_switch "switch0" \
+ "0 at eth0" "1:wan" "2:lan"
+ ;;
comfast,cf-e560ac)
ucidef_set_interface_wan "eth1"
ucidef_add_switch "switch0" \
@@ -487,6 +491,9 @@ ath79_setup_macs()
lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
wan_mac=$(fritz_tffs -n macb -i $(find_mtd_part "tffs (1)"))
;;
+ comfast,cf-e375ac)
+ wan_mac=$(macaddr_add $(mtd_get_mac_binary art 0x0) 1)
+ ;;
compex,wpj344-16m|\
compex,wpj563)
wan_mac=$(mtd_get_mac_binary u-boot 0x2e018)
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 5a44dd94e5..9e4b4496e5 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -173,6 +173,7 @@ case "$FIRMWARE" in
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
rm /lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
;;
+ comfast,cf-e375ac|\
comfast,cf-e560ac|\
comfast,cf-ew72|\
comfast,cf-wr752ac-v1)
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 222a1511a7..8c21fdc7f0 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -553,6 +553,16 @@ define Device/comfast_cf-e314n-v2
endef
TARGET_DEVICES += comfast_cf-e314n-v2
+define Device/comfast_cf-e375ac
+ SOC := qca9563
+ DEVICE_VENDOR := COMFAST
+ DEVICE_MODEL := CF-E375AC
+ DEVICE_PACKAGES := kmod-ath10k-ct \
+ ath10k-firmware-qca9888-ct -uboot-envtools
+ IMAGE_SIZE := 16000k
+endef
+TARGET_DEVICES += comfast_cf-e375ac
+
define Device/comfast_cf-e5
SOC := qca9531
DEVICE_VENDOR := COMFAST
More information about the lede-commits
mailing list