[openwrt/openwrt] hostapd: fix uninitialized stack variable on CSA

[LEDE Commits]

nbd pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/8f7e6db23045b9b4831d10c5bdf29d514a3753c9

commit 8f7e6db23045b9b4831d10c5bdf29d514a3753c9
Author: Felix Fietkau <nbd at nbd.name>
AuthorDate: Mon Jul 12 13:31:04 2021 +0200

    hostapd: fix uninitialized stack variable on CSA
    
    Signed-off-by: Felix Fietkau <nbd at nbd.name>
---
 ...-fix-use-of-uninitialized-stack-variables.patch | 25 ++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/package/network/services/hostapd/patches/022-hostapd-fix-use-of-uninitialized-stack-variables.patch b/package/network/services/hostapd/patches/022-hostapd-fix-use-of-uninitialized-stack-variables.patch
new file mode 100644
index 0000000000..c7da33f029
--- /dev/null
+++ b/package/network/services/hostapd/patches/022-hostapd-fix-use-of-uninitialized-stack-variables.patch
@@ -0,0 +1,25 @@
+From: Felix Fietkau <nbd at nbd.name>
+Date: Thu, 8 Jul 2021 16:33:03 +0200
+Subject: [PATCH] hostapd: fix use of uninitialized stack variables
+
+When a CSA is performed on an 80 MHz channel, hostapd_change_config_freq
+unconditionally calls hostapd_set_oper_centr_freq_seg0/1_idx with seg0/1
+filled by ieee80211_freq_to_chan.
+However, if ieee80211_freq_to_chan fails (because the freq is 0 or invalid),
+seg0/1 remains uninitialized and filled with stack garbage, causing errors
+such as "hostapd: 80 MHz: center segment 1 configured"
+
+Signed-off-by: Felix Fietkau <nbd at nbd.name>
+---
+
+--- a/src/ap/hostapd.c
++++ b/src/ap/hostapd.c
+@@ -3431,7 +3431,7 @@ static int hostapd_change_config_freq(st
+ 				      struct hostapd_freq_params *old_params)
+ {
+ 	int channel;
+-	u8 seg0, seg1;
++	u8 seg0 = 0, seg1 = 0;
+ 	struct hostapd_hw_modes *mode;
+ 
+ 	if (!params->channel) {