[openwrt/openwrt] ath79: add support for TP-Link RE455 v1
LEDE Commits
lede-commits at lists.infradead.org
Sun Jul 11 07:58:26 PDT 2021
adrian pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/af56075a8ff760832df27546325428f2497a0121
commit af56075a8ff760832df27546325428f2497a0121
Author: Roberto Valentini <valantin89 at gmail.com>
AuthorDate: Thu Jul 1 11:56:30 2021 +0200
ath79: add support for TP-Link RE455 v1
TP-Link RE455 v1 is a dual band router/range-extender based on
Qualcomm/Atheros QCA9563 + QCA9880.
This device is nearly identical to RE450 v3
Specification:
- 775 MHz CPU
- 64 MB of RAM (DDR2)
- 8 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 3T3R 5 GHz
- 1x 10/100/1000 Mbps Ethernet (AR8033 PHY)
- 7x LED, 4x button
- UART header on PCB[1]
Flash instruction:
Apply factory image in OEM firmware web-gui.
[1] Didn't work, probably need to short unpopulated resistor R64
and R69 as RE450v3
Signed-off-by: Roberto Valentini <valantin89 at gmail.com>
---
target/linux/ath79/dts/qca9563_tplink_re455-v1.dts | 52 ++++++++++++++++++++++
.../ath79/generic/base-files/etc/board.d/01_leds | 3 +-
.../generic/base-files/etc/board.d/02_network | 1 +
.../etc/hotplug.d/firmware/11-ath10k-caldata | 3 +-
target/linux/ath79/image/generic-tp-link.mk | 12 +++++
tools/firmware-utils/src/tplink-safeloader.c | 40 +++++++++++++++++
6 files changed, 109 insertions(+), 2 deletions(-)
diff --git a/target/linux/ath79/dts/qca9563_tplink_re455-v1.dts b/target/linux/ath79/dts/qca9563_tplink_re455-v1.dts
new file mode 100644
index 0000000000..b6c1efb846
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_re455-v1.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_tplink_re450.dtsi"
+
+/ {
+ compatible = "tplink,re455-v1", "qca,qca9563";
+ model = "TP-Link RE455 v1";
+};
+
+&partitions {
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ info: partition at 20000 {
+ label = "info";
+ reg = <0x020000 0x002000>;
+ read-only;
+ };
+
+ partition at 22000 {
+ label = "partition-table";
+ reg = <0x022000 0x002000>;
+ read-only;
+ };
+
+ partition at 24000 {
+ label = "info2";
+ reg = <0x024000 0x00a000>;
+ read-only;
+ };
+
+ partition at 2e000 {
+ label = "config";
+ reg = <0x02e000 0x022000>;
+ read-only;
+ };
+
+ partition at 50000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x050000 0x7a0000>;
+ };
+
+ art: partition at 7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index 890b38e58a..5e5ccca32f 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -352,7 +352,8 @@ tplink,tl-wr902ac-v1)
tplink,re355-v1|\
tplink,re450-v1|\
tplink,re450-v2|\
-tplink,re450-v3)
+tplink,re450-v3|\
+tplink,re455-v1)
ucidef_set_led_netdev "lan_data" "LAN Data" "green:lan_data" "eth0" "tx rx"
ucidef_set_led_netdev "lan_link" "LAN Link" "green:lan_link" "eth0" "link"
;;
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 025d55fec0..1731f141af 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -70,6 +70,7 @@ ath79_setup_interfaces()
tplink,re450-v1|\
tplink,re450-v2|\
tplink,re450-v3|\
+ tplink,re455-v1|\
tplink,tl-wr902ac-v1|\
ubnt,bullet-ac|\
ubnt,bullet-m-ar7240|\
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 8d7407450d..59d692c3d0 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -141,7 +141,8 @@ case "$FIRMWARE" in
;;
tplink,eap245-v1|\
tplink,re450-v2|\
- tplink,re450-v3)
+ tplink,re450-v3|\
+ tplink,re455-v1)
caldata_extract "art" 0x5000 0x844
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1)
;;
diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk
index 9c4920b4e6..16494b111f 100644
--- a/target/linux/ath79/image/generic-tp-link.mk
+++ b/target/linux/ath79/image/generic-tp-link.mk
@@ -486,6 +486,18 @@ define Device/tplink_re450-v3
endef
TARGET_DEVICES += tplink_re450-v3
+define Device/tplink_re455-v1
+ $(Device/tplink-safeloader)
+ SOC := qca9563
+ IMAGE_SIZE := 7808k
+ DEVICE_MODEL := RE455
+ DEVICE_VARIANT := v1
+ DEVICE_PACKAGES := kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct
+ TPLINK_BOARD_ID := RE455-V1
+ LOADER_TYPE := elf
+endef
+TARGET_DEVICES += tplink_re455-v1
+
define Device/tplink_tl-mr6400-v1
$(Device/tplink-8mlzma)
SOC := qca9531
diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c
index 432044882c..4e7549d5e6 100644
--- a/tools/firmware-utils/src/tplink-safeloader.c
+++ b/tools/firmware-utils/src/tplink-safeloader.c
@@ -2431,6 +2431,46 @@ static struct device_info boards[] = {
.last_sysupgrade_partition = "file-system"
},
+ /** Firmware layout for the RE455 v1 */
+ {
+ .id = "RE455-V1",
+ .vendor = "",
+ .support_list =
+ "SupportList:\r\n"
+ "{product_name:RE455,product_ver:1.0.0,special_id:00000000}\r\n"
+ "{product_name:RE455,product_ver:1.0.0,special_id:55530000}\r\n"
+ "{product_name:RE455,product_ver:1.0.0,special_id:45550000}\r\n"
+ "{product_name:RE455,product_ver:1.0.0,special_id:4A500000}\r\n"
+ "{product_name:RE455,product_ver:1.0.0,special_id:43410000}\r\n"
+ "{product_name:RE455,product_ver:1.0.0,special_id:41550000}\r\n"
+ "{product_name:RE455,product_ver:1.0.0,special_id:41530000}\r\n"
+ "{product_name:RE455,product_ver:1.0.0,special_id:4B520000}\r\n"
+ "{product_name:RE455,product_ver:1.0.0,special_id:42520000}\r\n",
+ .part_trail = 0x00,
+ .soft_ver = NULL,
+
+ /* We're using a dynamic kernel/rootfs split here */
+ .partitions = {
+ {"fs-uboot", 0x00000, 0x20000},
+ {"default-mac", 0x20000, 0x00020},
+ {"pin", 0x20020, 0x00020},
+ {"product-info", 0x21000, 0x01000},
+ {"partition-table", 0x22000, 0x02000},
+ {"soft-version", 0x24000, 0x01000},
+ {"support-list", 0x25000, 0x01000},
+ {"profile", 0x26000, 0x08000},
+ {"user-config", 0x2e000, 0x10000},
+ {"default-config", 0x3e000, 0x10000},
+ {"config-info", 0x4e000, 0x00400},
+ {"firmware", 0x50000, 0x7a0000},
+ {"radio", 0x7f0000, 0x10000},
+ {NULL, 0, 0}
+ },
+
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "file-system"
+ },
+
/** Firmware layout for the RE500 */
{
.id = "RE500-V1",
More information about the lede-commits
mailing list