[openwrt/openwrt] ath79: Add support for OpenMesh MR1750 v2

LEDE Commits lede-commits at lists.infradead.org
Tue Jan 19 15:43:34 EST 2021


adrian pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/0988e03f0e676286f3377d1530ebfb0d819ee629

commit 0988e03f0e676286f3377d1530ebfb0d819ee629
Author: Sven Eckelmann <sven at narfation.org>
AuthorDate: Mon Nov 23 13:41:34 2020 +0100

    ath79: Add support for OpenMesh MR1750 v2
    
    Device specifications:
    ======================
    
    * Qualcomm/Atheros QCA9558 ver 1 rev 0
    * 720/600/240 MHz (CPU/DDR/AHB)
    * 128 MB of RAM
    * 16 MB of SPI NOR flash
      - 2x 7 MB available; but one of the 7 MB regions is the recovery image
    * 3T3R 2.4 GHz Wi-Fi (11n)
    * 3T3R 5 GHz Wi-Fi (11ac)
    * 6x GPIO-LEDs (2x wifi, 2x status, 1x lan, 1x power)
    * 1x GPIO-button (reset)
    * external h/w watchdog (enabled by default))
    * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
    * 1x ethernet
      - AR8035 ethernet PHY (RGMII)
      - 10/100/1000 Mbps Ethernet
      - 802.3af POE
      - used as LAN interface
    * 12-24V 1A DC
    * internal antennas
    
    Flashing instructions:
    ======================
    
    Various methods can be used to install the actual image on the flash.
    Two easy ones are:
    
    ap51-flash
    ----------
    
    The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
    used to transfer the image to the u-boot when the device boots up.
    
    initramfs from TFTP
    -------------------
    
    The serial console must be used to access the u-boot shell during bootup.
    It can then be used to first boot up the initramfs image from a TFTP server
    (here with the IP 192.168.1.21):
    
       setenv serverip 192.168.1.21
       setenv ipaddr 192.168.1.1
       tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr
    
    The actual sysupgrade image can then be transferred (on the LAN port) to the
    device via
    
      scp <filename-of-squashfs-sysupgrade>.bin root at 192.168.1.1:/tmp/
    
    On the device, the sysupgrade must then be started using
    
      sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin
    
    Signed-off-by: Sven Eckelmann <sven at narfation.org>
    [rebase, add LED migration]
    Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
---
 package/boot/uboot-envtools/Makefile                     |  2 +-
 package/boot/uboot-envtools/files/ath79                  |  1 +
 target/linux/ath79/dts/qca9558_openmesh_mr1750-v2.dts    | 16 ++++++++++++++++
 .../linux/ath79/generic/base-files/etc/board.d/01_leds   |  3 ++-
 .../ath79/generic/base-files/etc/board.d/02_network      |  1 +
 .../base-files/etc/hotplug.d/firmware/11-ath10k-caldata  |  3 ++-
 .../generic/base-files/etc/uci-defaults/04_led_migration |  3 ++-
 .../ath79/generic/base-files/lib/upgrade/platform.sh     |  1 +
 target/linux/ath79/image/generic.mk                      | 11 +++++++++++
 9 files changed, 37 insertions(+), 4 deletions(-)

diff --git a/package/boot/uboot-envtools/Makefile b/package/boot/uboot-envtools/Makefile
index fb025c95ea..dda9d6be9c 100644
--- a/package/boot/uboot-envtools/Makefile
+++ b/package/boot/uboot-envtools/Makefile
@@ -10,7 +10,7 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=uboot-envtools
 PKG_DISTNAME:=u-boot
 PKG_VERSION:=2020.04
-PKG_RELEASE:=19
+PKG_RELEASE:=20
 
 PKG_SOURCE:=$(PKG_DISTNAME)-$(PKG_VERSION).tar.bz2
 PKG_SOURCE_URL:= \
diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79
index dfb77112a7..4b84766814 100644
--- a/package/boot/uboot-envtools/files/ath79
+++ b/package/boot/uboot-envtools/files/ath79
@@ -53,6 +53,7 @@ openmesh,mr600-v2|\
 openmesh,mr900-v1|\
 openmesh,mr900-v2|\
 openmesh,mr1750-v1|\
+openmesh,mr1750-v2|\
 openmesh,om5p|\
 openmesh,om5p-ac-v2|\
 samsung,wam250|\
diff --git a/target/linux/ath79/dts/qca9558_openmesh_mr1750-v2.dts b/target/linux/ath79/dts/qca9558_openmesh_mr1750-v2.dts
new file mode 100644
index 0000000000..0271db0802
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_openmesh_mr1750-v2.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_openmesh_mr.dtsi"
+
+/ {
+	compatible = "openmesh,mr1750-v2", "qca,qca9558";
+	model = "OpenMesh MR1750 v2";
+};
+
+&led_wifi2g {
+	linux,default-trigger = "phy1tpt";
+};
+
+&led_wifi5g {
+	linux,default-trigger = "phy0tpt";
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index 2cdad7dd77..c6ade98c8f 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -160,7 +160,8 @@ engenius,eap300-v2|\
 enterasys,ws-ap3705i|\
 openmesh,mr900-v1|\
 openmesh,mr900-v2|\
-openmesh,mr1750-v1)
+openmesh,mr1750-v1|\
+openmesh,mr1750-v2)
 	ucidef_set_led_netdev "lan" "LAN" "blue:lan" "eth0"
 	;;
 compex,wpj344-16m|\
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index ef6b70c902..0c08871f99 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -51,6 +51,7 @@ ath79_setup_interfaces()
 	openmesh,mr900-v1|\
 	openmesh,mr900-v2|\
 	openmesh,mr1750-v1|\
+	openmesh,mr1750-v2|\
 	pcs,cap324|\
 	pisen,ts-d084|\
 	pisen,wmb001n|\
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index d1a4767648..84323046f6 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -96,7 +96,8 @@ case "$FIRMWARE" in
 		caldata_extract "art" 0x5000 0x844
 		ath10k_patch_mac $(mtd_get_mac_binary art 0xc)
 		;;
-	openmesh,mr1750-v1)
+	openmesh,mr1750-v1|\
+	openmesh,mr1750-v2)
 		caldata_extract "ART" 0x5000 0x844
 		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
 		;;
diff --git a/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration b/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration
index 1d8909f688..ea5cafa66b 100644
--- a/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration
+++ b/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration
@@ -25,7 +25,8 @@ openmesh,mr600-v2)
 	;;
 openmesh,mr900-v1|\
 openmesh,mr900-v2|\
-openmesh,mr1750-v1)
+openmesh,mr1750-v1|\
+openmesh,mr1750-v2)
 	migrate_leds ":wlan24=:wifi2g" ":wlan58=:wifi5g" ":wan=:lan"
 	;;
 pcs,cap324)
diff --git a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
index 01a9f61943..575761d079 100644
--- a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
@@ -55,6 +55,7 @@ platform_do_upgrade() {
 	openmesh,mr900-v1|\
 	openmesh,mr900-v2|\
 	openmesh,mr1750-v1|\
+	openmesh,mr1750-v2|\
 	openmesh,om2p-v2|\
 	openmesh,om2p-v4|\
 	openmesh,om2p-hs-v1|\
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 92e9458b37..3b5cb6bdfa 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -1601,6 +1601,17 @@ define Device/openmesh_mr1750-v1
 endef
 TARGET_DEVICES += openmesh_mr1750-v1
 
+define Device/openmesh_mr1750-v2
+  $(Device/openmesh_common_64k)
+  SOC := qca9558
+  DEVICE_MODEL := MR1750
+  DEVICE_VARIANT := v2
+  DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
+  OPENMESH_CE_TYPE := MR1750
+  SUPPORTED_DEVICES += mr1750v2
+endef
+TARGET_DEVICES += openmesh_mr1750-v2
+
 define Device/openmesh_om2p-v2
   $(Device/openmesh_common_256k)
   SOC := ar9330



More information about the lede-commits mailing list