[openwrt/openwrt] ipq40xx: split generic images into own file
LEDE Commits
lede-commits at lists.infradead.org
Sun Jan 17 01:17:33 EST 2021
lynxis pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/378c7ff282101b204d2a29fa080ed66f2a14940d
commit 378c7ff282101b204d2a29fa080ed66f2a14940d
Author: Alexander Couzens <lynxis at fe80.eu>
AuthorDate: Sun Jan 17 06:54:04 2021 +0100
ipq40xx: split generic images into own file
In preparation of the new mikrotik subtarget split the generic images
into generic.mk
Signed-off-by: Alexander Couzens <lynxis at fe80.eu>
---
target/linux/ipq40xx/image/Makefile | 807 +--------------------
.../linux/ipq40xx/image/{Makefile => generic.mk} | 15 -
2 files changed, 1 insertion(+), 821 deletions(-)
diff --git a/target/linux/ipq40xx/image/Makefile b/target/linux/ipq40xx/image/Makefile
index f10ff002dc..a764cb60af 100644
--- a/target/linux/ipq40xx/image/Makefile
+++ b/target/linux/ipq40xx/image/Makefile
@@ -1,10 +1,6 @@
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
-DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
-DEVICE_VARS += RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
-DEVICE_VARS += WRGG_DEVNAME WRGG_SIGNATURE
-
define Device/Default
PROFILES := Default
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
@@ -18,807 +14,6 @@ define Device/Default
IMAGE/sysupgrade.bin/squashfs :=
endef
-define Device/FitImage
- KERNEL_SUFFIX := -fit-uImage.itb
- KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
- KERNEL_NAME := Image
-endef
-
-define Device/FitImageLzma
- KERNEL_SUFFIX := -fit-uImage.itb
- KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb
- KERNEL_NAME := Image
-endef
-
-define Device/FitzImage
- KERNEL_SUFFIX := -fit-zImage.itb
- KERNEL = kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb
- KERNEL_NAME := zImage
-endef
-
-define Device/UbiFit
- KERNEL_IN_UBI := 1
- IMAGES := nand-factory.ubi nand-sysupgrade.bin
- IMAGE/nand-factory.ubi := append-ubi
- IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
-endef
-
-define Device/DniImage
- $(call Device/FitzImage)
- NETGEAR_BOARD_ID :=
- NETGEAR_HW_ID :=
- IMAGES += factory.img
- IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
- IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
- append-rootfs | pad-rootfs | append-metadata | check-size
-endef
-
-define Build/append-rootfshdr
- mkimage -A $(LINUX_KARCH) \
- -O linux -T filesystem \
- -C lzma -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
- -n root.squashfs -d $(IMAGE_ROOTFS) $@.new
- dd if=$@.new bs=64 count=1 >> $(IMAGE_KERNEL)
-endef
-
-define Build/mkmylofw_32m
- $(eval device_id=$(word 1,$(1)))
- $(eval revision=$(word 2,$(1)))
-
- let \
- size="$$(stat -c%s $@)" \
- pad="$(subst k,* 1024,$(BLOCKSIZE))" \
- pad="(pad - (size % pad)) % pad" \
- newsize='size + pad'; \
- $(STAGING_DIR_HOST)/bin/mkmylofw \
- -B WPE72 -i 0x11f6:$(device_id):0x11f6:$(device_id) -r $(revision) \
- -s 0x2000000 -p0x180000:$$newsize:al:0x80208000:"OpenWrt":$@ \
- $@.new
- @mv $@.new $@
-endef
-
-define Build/qsdk-ipq-factory-nand-askey
- $(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh $@.its\
- askey_kernel $(IMAGE_KERNEL) \
- askey_fs $(IMAGE_ROOTFS) \
- ubifs $@
- PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
- @mv $@.new $@
-endef
-
-define Build/SenaoFW
- -$(STAGING_DIR_HOST)/bin/mksenaofw \
- -n $(BOARD_NAME) -r $(VENDOR_ID) -p $(1) \
- -c $(DATECODE) -w $(2) -x $(CW_VER) -t 0 \
- -e $@ \
- -o $@.new
- @cp $@.new $@
-endef
-
-define Build/wrgg-image
- mkwrggimg -i $@ \
- -o $@.new \
- -d "$(WRGG_DEVNAME)" \
- -s "$(WRGG_SIGNATURE)" \
- -v "" -m "" -B ""
- mv $@.new $@
-endef
-
-define Device/8dev_habanero-dvk
- $(call Device/FitImageLzma)
- DEVICE_VENDOR := 8devices
- DEVICE_MODEL := Habanero DVK
- IMAGE_SIZE := 30976k
- SOC := qcom-ipq4019
- DEVICE_PACKAGES := ipq-wifi-8dev_habanero-dvk
- IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | append-metadata | check-size
-endef
-TARGET_DEVICES += 8dev_habanero-dvk
-
-define Device/8dev_jalapeno-common
- $(call Device/FitImage)
- $(call Device/UbiFit)
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- SOC := qcom-ipq4018
-endef
-
-define Device/8dev_jalapeno
- $(call Device/8dev_jalapeno-common)
- DEVICE_VENDOR := 8devices
- DEVICE_MODEL := Jalapeno
-endef
-TARGET_DEVICES += 8dev_jalapeno
-
-define Device/alfa-network_ap120c-ac
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_VENDOR := ALFA Network
- DEVICE_MODEL := AP120C-AC
- SOC := qcom-ipq4018
- DEVICE_PACKAGES := kmod-usb-acm \
- kmod-tpm-i2c-atmel uboot-envtools
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- IMAGE_SIZE := 65536k
- IMAGES := nand-factory.bin nand-sysupgrade.bin
- IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
-endef
-TARGET_DEVICES += alfa-network_ap120c-ac
-
-define Device/aruba_glenmorangie
- $(call Device/FitImageLzma)
- DEVICE_VENDOR := Aruba
- SOC := qcom-ipq4029
- DEVICE_PACKAGES := ipq-wifi-aruba_ap-303
-endef
-
-define Device/aruba_ap-303
- $(call Device/aruba_glenmorangie)
- DEVICE_MODEL := AP-303
- DEVICE_PACKAGES += uboot-envtools
-endef
-TARGET_DEVICES += aruba_ap-303
-
-define Device/aruba_ap-303h
- $(call Device/aruba_glenmorangie)
- DEVICE_MODEL := AP-303H
-endef
-TARGET_DEVICES += aruba_ap-303h
-
-define Device/aruba_ap-365
- $(call Device/aruba_glenmorangie)
- DEVICE_MODEL := AP-365
- DEVICE_PACKAGES += kmod-hwmon-ad7418 uboot-envtools
-endef
-TARGET_DEVICES += aruba_ap-365
-
-define Device/asus_map-ac2200
- $(call Device/FitImageLzma)
- DEVICE_VENDOR := ASUS
- DEVICE_MODEL := Lyra (MAP-AC2200)
- SOC := qcom-ipq4019
- DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-ath3k
-endef
-TARGET_DEVICES += asus_map-ac2200
-
-define Device/asus_rt-ac58u
- $(call Device/FitImageLzma)
- DEVICE_VENDOR := ASUS
- DEVICE_MODEL := RT-AC58U
- SOC := qcom-ipq4018
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- DTB_SIZE := 65536
- IMAGE_SIZE := 20439364
- FILESYSTEMS := squashfs
-# Someone - in their infinite wisdom - decided to put the firmware
-# version in front of the image name \03\00\00\04 => Version 3.0.0.4
-# Since u-boot works with strings we either need another fixup step
-# to add a version... or we are very careful not to add '\0' into that
-# string and call it a day.... Yeah, we do the latter!
- UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
- DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
- kmod-usb-ledtrig-usbport
-endef
-TARGET_DEVICES += asus_rt-ac58u
-
-define Device/avm_fritzbox-4040
- $(call Device/FitImageLzma)
- DEVICE_VENDOR := AVM
- DEVICE_MODEL := FRITZ!Box 4040
- SOC := qcom-ipq4018
- BOARD_NAME := fritz4040
- IMAGE_SIZE := 29056k
- UBOOT_PATH := $(STAGING_DIR_IMAGE)/uboot-fritz4040.bin
- UBOOT_PARTITION_SIZE := 524288
- IMAGES += eva.bin
- IMAGE/eva.bin := append-uboot | pad-to $$$$(UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs
- IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size
- DEVICE_PACKAGES := fritz-tffs fritz-caldata
-endef
-TARGET_DEVICES += avm_fritzbox-4040
-
-define Device/avm_fritzbox-7530
- $(call Device/FitImageLzma)
- DEVICE_VENDOR := AVM
- DEVICE_MODEL := FRITZ!Box 7530
- SOC := qcom-ipq4019
- DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
-endef
-TARGET_DEVICES += avm_fritzbox-7530
-
-define Device/avm_fritzrepeater-1200
- $(call Device/FitImageLzma)
- DEVICE_VENDOR := AVM
- DEVICE_MODEL := FRITZ!Repeater 1200
- SOC := qcom-ipq4019
- DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ipq-wifi-avm_fritzrepeater-1200
-endef
-TARGET_DEVICES += avm_fritzrepeater-1200
-
-define Device/avm_fritzrepeater-3000
- $(call Device/FitImageLzma)
- DEVICE_VENDOR := AVM
- DEVICE_MODEL := FRITZ!Repeater 3000
- SOC := qcom-ipq4019
- DEVICE_PACKAGES := ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
-endef
-TARGET_DEVICES += avm_fritzrepeater-3000
-
-define Device/buffalo_wtr-m2133hp
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_VENDOR := Buffalo
- DEVICE_MODEL := WTR-M2133HP
- SOC := qcom-ipq4019
- DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9984-ct ipq-wifi-buffalo_wtr-m2133hp
- BLOCKSIZE := 128k
- PAGESIZE := 2048
-endef
-TARGET_DEVICES += buffalo_wtr-m2133hp
-
-define Device/cellc_rtl30vw
- KERNEL_SUFFIX := -fit-uImage.itb
- KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
- KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb | uImage lzma | pad-to 2048
- KERNEL_NAME := Image
- KERNEL_IN_UBI :=
- IMAGES := nand-factory.bin nand-sysupgrade.bin
- IMAGE/nand-factory.bin := append-rootfshdr | append-ubi | qsdk-ipq-factory-nand-askey
- IMAGE/nand-sysupgrade.bin := append-rootfshdr | sysupgrade-tar | append-metadata
- DEVICE_VENDOR := Cell C
- DEVICE_MODEL := RTL30VW
- SOC := qcom-ipq4019
- DEVICE_DTS_CONFIG := config at 5
- KERNEL_INSTALL := 1
- KERNEL_SIZE := 4096k
- IMAGE_SIZE := 57344k
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi ipq-wifi-cellc_rtl30vw
-endef
-TARGET_DEVICES += cellc_rtl30vw
-
-define Device/cilab_meshpoint-one
- $(call Device/8dev_jalapeno-common)
- DEVICE_VENDOR := Crisis Innovation Lab
- DEVICE_MODEL := MeshPoint.One
- DEVICE_PACKAGES := kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
-endef
-TARGET_DEVICES += cilab_meshpoint-one
-
-define Device/compex_wpj419
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_VENDOR := Compex
- DEVICE_MODEL := WPJ419
- SOC := qcom-ipq4019
- DEVICE_DTS_CONFIG := config at 12
- KERNEL_INSTALL := 1
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- FILESYSTEMS := squashfs
-endef
-TARGET_DEVICES += compex_wpj419
-
-define Device/compex_wpj428
- $(call Device/FitImage)
- DEVICE_VENDOR := Compex
- DEVICE_MODEL := WPJ428
- SOC := qcom-ipq4028
- DEVICE_DTS_CONFIG := config at 4
- BLOCKSIZE := 64k
- IMAGE_SIZE := 31232k
- KERNEL_SIZE := 4096k
- IMAGES += cpximg-6a04.bin
- IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
- IMAGE/cpximg-6a04.bin := append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m 0x8A2 3
- DEVICE_PACKAGES := kmod-gpio-beeper
-endef
-TARGET_DEVICES += compex_wpj428
-
-define Device/devolo_magic-2-wifi-next
- $(call Device/FitImage)
- DEVICE_VENDOR := devolo
- DEVICE_MODEL := Magic 2 WiFi next
- SOC := qcom-ipq4018
- KERNEL_SIZE := 4096k
-
- # If the bootloader sees 0xDEADC0DE and this trailer at the 64k boundary of a TFTP image
- # it will bootm it, just like we want for the initramfs.
- KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to 64k |\
- append-string -e '\xDE\xAD\xC0\xDE{"fl_initramfs":""}\x00'
-
- IMAGE_SIZE := 26624k
- IMAGES := sysupgrade.bin
- IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
- DEVICE_PACKAGES := ipq-wifi-devolo_magic-2-wifi-next uboot-envtools
-endef
-TARGET_DEVICES += devolo_magic-2-wifi-next
-
-define Device/dlink_dap-2610
- $(call Device/FitImageLzma)
- DEVICE_VENDOR := D-Link
- DEVICE_MODEL := DAP-2610
- SOC := qcom-ipq4018
- DEVICE_DTS_CONFIG := config at ap.dk01.1-c1
- BLOCKSIZE := 64k
- WRGG_DEVNAME := /dev/mtdblock/8
- WRGG_SIGNATURE := wapac30_dkbs_dap2610
- IMAGE_SIZE := 14080k
- IMAGES += factory.bin
- # Bootloader expects a special 160 byte header which is added by
- # wrgg-image.
- # Factory image size must be larger than 6MB, and size in wrgg header must
- # match actual factory image size to be flashable from D-Link http server.
- # Bootloader verifies checksum of wrgg image before booting, thus jffs2
- # cannot be part of the wrgg image. This is solved in the factory image by
- # having the rootfs at the end of the image (without pad-rootfs). And in
- # the sysupgrade image only the kernel is included in the wrgg checksum,
- # but this is not flashable from the D-link http server.
- # append-rootfs must start on an erase block boundary.
- IMAGE/factory.bin := append-kernel | pad-offset 6144k 160 | append-rootfs | wrgg-image | check-size
- IMAGE/sysupgrade.bin := append-kernel | wrgg-image | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
- DEVICE_PACKAGES := ipq-wifi-dlink_dap2610
-endef
-TARGET_DEVICES += dlink_dap-2610
-
-define Device/edgecore_ecw5211
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_VENDOR := Edgecore
- DEVICE_MODEL := ECW5211
- SOC := qcom-ipq4018
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- DEVICE_PACKAGES := kmod-tpm-i2c-atmel kmod-usb-acm uboot-envtools
-endef
-TARGET_DEVICES += edgecore_ecw5211
-
-define Device/edgecore_oap100
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_VENDOR := Edgecore
- DEVICE_MODEL := OAP100
- SOC := qcom-ipq4019
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- IMAGES := nand-sysupgrade.bin
- DEVICE_DTS_CONFIG := config at ap.dk07.1-c1
- DEVICE_PACKAGES := ipq-wifi-edgecore_oap100 kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
-endef
-TARGET_DEVICES += edgecore_oap100
-
-define Device/engenius_eap1300
- $(call Device/FitImage)
- DEVICE_VENDOR := EnGenius
- DEVICE_MODEL := EAP1300
- DEVICE_DTS_CONFIG := config at 4
- BOARD_NAME := eap1300
- SOC := qcom-ipq4018
- KERNEL_SIZE := 5120k
- IMAGE_SIZE := 25344k
- IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-endef
-TARGET_DEVICES += engenius_eap1300
-
-define Device/engenius_eap2200
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_VENDOR := EnGenius
- DEVICE_MODEL := EAP2200
- SOC := qcom-ipq4019
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-engenius_eap2200 -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
-endef
-TARGET_DEVICES += engenius_eap2200
-
-define Device/engenius_emd1
- $(call Device/FitImage)
- DEVICE_VENDOR := EnGenius
- DEVICE_MODEL := EMD1
- DEVICE_DTS_CONFIG := config at 4
- SOC := qcom-ipq4018
- IMAGE_SIZE := 30720k
- IMAGES += factory.bin
- IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
- IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
-endef
-TARGET_DEVICES += engenius_emd1
-
-define Device/engenius_emr3500
- $(call Device/FitImage)
- DEVICE_VENDOR := EnGenius
- DEVICE_MODEL := EMR3500
- DEVICE_DTS_CONFIG := config at 4
- SOC := qcom-ipq4018
- KERNEL_SIZE := 4096k
- IMAGE_SIZE := 30720k
- IMAGES += factory.bin
- IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
- IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
-endef
-TARGET_DEVICES += engenius_emr3500
-
-define Device/engenius_ens620ext
- $(call Device/FitImage)
- DEVICE_VENDOR := EnGenius
- DEVICE_MODEL := ENS620EXT
- SOC := qcom-ipq4018
- DEVICE_DTS_CONFIG := config at 4
- BLOCKSIZE := 64k
- PAGESIZE := 256
- BOARD_NAME := ENS620EXT
- VENDOR_ID := 0x0101
- PRODUCT_ID := 0x79
- PRODUCT_ID_NEW := 0xA4
- DATECODE := 190507
- FW_VER := 3.1.2
- FW_VER_NEW := 3.5.6
- CW_VER := 1.8.99
- IMAGE_SIZE := 21312k
- KERNEL_SIZE := 5120k
- FILESYSTEMS := squashfs
- IMAGES += factory_30.bin factory_35.bin
- IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
- IMAGE/factory_30.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size | SenaoFW $$$$(PRODUCT_ID) $$$$(FW_VER)
- IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size | SenaoFW $$$$(PRODUCT_ID_NEW) $$$$(FW_VER_NEW)
-endef
-TARGET_DEVICES += engenius_ens620ext
-
-define Device/ezviz_cs-w3-wd1200g-eup
- $(call Device/FitImage)
- DEVICE_VENDOR := EZVIZ
- DEVICE_MODEL := CS-W3-WD1200G
- DEVICE_VARIANT := EUP
- DEVICE_DTS_CONFIG := config at 4
- IMAGE_SIZE := 14848k
- SOC := qcom-ipq4018
- IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
- append-metadata
- DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
- ipq-wifi-ezviz_cs-w3-wd1200g-eup
-endef
-TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
-
-define Device/glinet_gl-ap1300
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_VENDOR := GL.iNet
- DEVICE_MODEL := GL-AP1300
- SOC := qcom-ipq4018
- DEVICE_DTS_CONFIG := config at ap.dk01.1-c2
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- IMAGE_SIZE := 131072k
- KERNEL_INSTALL := 1
- DEVICE_PACKAGES := ipq-wifi-glinet_gl-ap1300
-endef
-TARGET_DEVICES += glinet_gl-ap1300
-
-define Device/glinet_gl-b1300
- $(call Device/FitImage)
- DEVICE_VENDOR := GL.iNet
- DEVICE_MODEL := GL-B1300
- BOARD_NAME := gl-b1300
- SOC := qcom-ipq4029
- KERNEL_SIZE := 4096k
- IMAGE_SIZE := 26624k
- IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
-endef
-TARGET_DEVICES += glinet_gl-b1300
-
-define Device/glinet_gl-s1300
- $(call Device/FitImage)
- DEVICE_VENDOR := GL.iNet
- DEVICE_MODEL := GL-S1300
- SOC := qcom-ipq4029
- KERNEL_SIZE := 4096k
- IMAGE_SIZE := 26624k
- IMAGES := sysupgrade.bin
- IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
- DEVICE_PACKAGES := ipq-wifi-glinet_gl-s1300 kmod-fs-ext4 kmod-mmc kmod-spi-dev
-endef
-TARGET_DEVICES += glinet_gl-s1300
-
-define Device/linksys_ea6350v3
- # The Linksys EA6350v3 has a uboot bootloader that does not
- # support either booting lzma kernel images nor booting UBI
- # partitions. This uboot, however, supports raw kernel images and
- # gzipped images.
- #
- # As for the time of writing this, the device will boot the kernel
- # from a fixed address with a fixed length of 3MiB. Also, the
- # device has a hard-coded kernel command line that requieres the
- # rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
- # Oh... and the kernel partition overlaps with the rootfs
- # partition (the same for alt_kernel and alt_rootfs).
- #
- # If you are planing re-partitioning the device, you may want to
- # keep those details in mind:
- # 1. The kernel adresses you should honor are 0x00000000 and
- # 0x02800000 respectively.
- # 2. The kernel size (plus the dtb) cannot exceed 3.00MiB in size.
- # 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
- # 4. The kernel command line from uboot is harcoded to boot with
- # rootfs either in mtd11 or mtd13.
- $(call Device/FitzImage)
- DEVICE_VENDOR := Linksys
- DEVICE_MODEL := EA6350
- DEVICE_VARIANT := v3
- SOC := qcom-ipq4018
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 3072k
- IMAGE_SIZE := 37888k
- UBINIZE_OPTS := -E 5
- IMAGES += factory.bin
- IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
- DEVICE_PACKAGES := uboot-envtools
-endef
-TARGET_DEVICES += linksys_ea6350v3
-
-define Device/linksys_ea8300
- $(call Device/FitzImage)
- DEVICE_VENDOR := Linksys
- DEVICE_MODEL := EA8300
- SOC := qcom-ipq4019
- KERNEL_SIZE := 3072k
- IMAGE_SIZE := 87040k
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
- IMAGES += factory.bin
- IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
- DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
-endef
-TARGET_DEVICES += linksys_ea8300
-
-define Device/linksys_mr8300
- $(call Device/FitzImage)
- DEVICE_VENDOR := Linksys
- DEVICE_MODEL := MR8300
- SOC := qcom-ipq4019
- KERNEL_SIZE := 3072k
- IMAGE_SIZE := 87040k
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
- IMAGES += factory.bin
- IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MR8300
- DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9888-ct ipq-wifi-linksys_mr8300-v0 kmod-usb-ledtrig-usbport
-endef
-TARGET_DEVICES += linksys_mr8300
-
-define Device/luma_wrtq-329acn
- $(call Device/FitImage)
- DEVICE_VENDOR := Luma Home
- DEVICE_MODEL := WRTQ-329ACN
- SOC := qcom-ipq4018
- DEVICE_PACKAGES := ipq-wifi-luma_wrtq-329acn kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio uboot-envtools
- IMAGE_SIZE := 76632k
- BLOCKSIZE := 128k
- PAGESIZE := 2048
-endef
-TARGET_DEVICES += luma_wrtq-329acn
-
-define Device/meraki_mr33
- $(call Device/FitImage)
- DEVICE_VENDOR := Cisco Meraki
- DEVICE_MODEL := MR33
- SOC := qcom-ipq4029
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
-endef
-TARGET_DEVICES += meraki_mr33
-
-define Device/mobipromo_cm520-79f
- $(call Device/FitzImage)
- $(call Device/UbiFit)
- DEVICE_VENDOR := MobiPromo
- DEVICE_MODEL := CM520-79F
- SOC := qcom-ipq4019
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- DEVICE_PACKAGES := ipq-wifi-mobipromo_cm520-79f kmod-usb-ledtrig-usbport
-endef
-TARGET_DEVICES += mobipromo_cm520-79f
-
-define Device/netgear_ex61x0v2
- $(call Device/DniImage)
- DEVICE_VENDOR := NETGEAR
- DEVICE_DTS_CONFIG := config at 4
- NETGEAR_BOARD_ID := EX6150v2series
- NETGEAR_HW_ID := 29765285+16+0+128+2x2
- IMAGE_SIZE := 14400k
- SOC := qcom-ipq4018
-endef
-
-define Device/netgear_ex6100v2
- $(call Device/netgear_ex61x0v2)
- DEVICE_MODEL := EX6100
- DEVICE_VARIANT := v2
-endef
-TARGET_DEVICES += netgear_ex6100v2
-
-define Device/netgear_ex6150v2
- $(call Device/netgear_ex61x0v2)
- DEVICE_MODEL := EX6150
- DEVICE_VARIANT := v2
-endef
-TARGET_DEVICES += netgear_ex6150v2
-
-define Device/openmesh_a42
- $(call Device/FitImageLzma)
- DEVICE_VENDOR := OpenMesh
- DEVICE_MODEL := A42
- SOC := qcom-ipq4018
- DEVICE_DTS_CONFIG := config at om.a42
- BLOCKSIZE := 64k
- KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
- IMAGE_SIZE := 15616k
- IMAGES += factory.bin
- IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
- IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
- DEVICE_PACKAGES := uboot-envtools
-endef
-TARGET_DEVICES += openmesh_a42
-
-define Device/openmesh_a62
- $(call Device/FitImageLzma)
- DEVICE_VENDOR := OpenMesh
- DEVICE_MODEL := A62
- SOC := qcom-ipq4019
- DEVICE_DTS_CONFIG := config at om.a62
- BLOCKSIZE := 64k
- KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
- IMAGE_SIZE := 15552k
- IMAGES += factory.bin
- IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
- IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
- DEVICE_PACKAGES := ath10k-firmware-qca9888-ct uboot-envtools
-endef
-TARGET_DEVICES += openmesh_a62
-
-define Device/plasmacloud_pa1200
- $(call Device/FitImageLzma)
- DEVICE_VENDOR := Plasma Cloud
- DEVICE_MODEL := PA1200
- SOC := qcom-ipq4018
- DEVICE_DTS_CONFIG := config at pc.pa1200
- BLOCKSIZE := 64k
- KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
- IMAGE_SIZE := 15616k
- IMAGES += factory.bin
- IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200
- IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
- DEVICE_PACKAGES := uboot-envtools ipq-wifi-plasmacloud-pa1200
-endef
-TARGET_DEVICES += plasmacloud_pa1200
-
-define Device/plasmacloud_pa2200
- $(call Device/FitImageLzma)
- DEVICE_VENDOR := Plasma Cloud
- DEVICE_MODEL := PA2200
- SOC := qcom-ipq4019
- DEVICE_DTS_CONFIG := config at pc.pa2200
- BLOCKSIZE := 64k
- KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
- IMAGE_SIZE := 15552k
- IMAGES += factory.bin
- IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA2200
- IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
- DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-plasmacloud-pa2200 uboot-envtools
-endef
-TARGET_DEVICES += plasmacloud_pa2200
-
-define Device/qcom_ap-dk01.1-c1
- DEVICE_VENDOR := Qualcomm Atheros
- DEVICE_MODEL := AP-DK01.1
- DEVICE_VARIANT := C1
- BOARD_NAME := ap-dk01.1-c1
- SOC := qcom-ipq4019
- DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
- KERNEL_INSTALL := 1
- KERNEL_SIZE := 4096k
- IMAGE_SIZE := 26624k
- $(call Device/FitImage)
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
-endef
-TARGET_DEVICES += qcom_ap-dk01.1-c1
-
-define Device/qcom_ap-dk04.1-c1
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_VENDOR := Qualcomm Atheros
- DEVICE_MODEL := AP-DK04.1
- DEVICE_VARIANT := C1
- SOC := qcom-ipq4019
- DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
- KERNEL_INSTALL := 1
- KERNEL_SIZE := 4048k
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- BOARD_NAME := ap-dk04.1-c1
-endef
-TARGET_DEVICES += qcom_ap-dk04.1-c1
-
-define Device/qxwlan_e2600ac-c1
- $(call Device/FitImage)
- DEVICE_VENDOR := Qxwlan
- DEVICE_MODEL := E2600AC
- DEVICE_VARIANT := C1
- BOARD_NAME := e2600ac-c1
- SOC := qcom-ipq4019
- KERNEL_SIZE := 4096k
- IMAGE_SIZE := 31232k
- IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
- DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
-endef
-TARGET_DEVICES += qxwlan_e2600ac-c1
-
-define Device/qxwlan_e2600ac-c2
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_VENDOR := Qxwlan
- DEVICE_MODEL := E2600AC
- DEVICE_VARIANT := C2
- SOC := qcom-ipq4019
- KERNEL_INSTALL := 1
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
-endef
-TARGET_DEVICES += qxwlan_e2600ac-c2
-
-define Device/unielec_u4019-32m
- $(call Device/FitImage)
- DEVICE_VENDOR := Unielec
- DEVICE_MODEL := U4019
- DEVICE_VARIANT := 32M
- BOARD_NAME := u4019-32m
- SOC := qcom-ipq4019
- KERNEL_SIZE := 4096k
- IMAGE_SIZE := 31232k
- IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-endef
-TARGET_DEVICES += unielec_u4019-32m
-
-define Device/zyxel_nbg6617
- $(call Device/FitImageLzma)
- DEVICE_VENDOR := ZyXEL
- DEVICE_MODEL := NBG6617
- SOC := qcom-ipq4018
- KERNEL_SIZE := 4096k
- ROOTFS_SIZE := 24960k
- RAS_BOARD := NBG6617
- RAS_ROOTFS_SIZE := 19840k
- RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
- IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
- IMAGES += factory.bin
-# The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
-# at least as large as the one of the initial firmware image (not the current
-# one on the device). This only applies to the Web-UI, the bootlaoder ignores
-# this minimum-size. However, the larger image can be flashed both ways.
- IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
- IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
- DEVICE_PACKAGES := uboot-envtools kmod-usb-ledtrig-usbport
-endef
-TARGET_DEVICES += zyxel_nbg6617
-
-define Device/zyxel_wre6606
- $(call Device/FitImage)
- DEVICE_VENDOR := ZyXEL
- DEVICE_MODEL := WRE6606
- DEVICE_DTS_CONFIG := config at 4
- SOC := qcom-ipq4018
- IMAGE_SIZE := 13184k
- IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size
- DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
-endef
-TARGET_DEVICES += zyxel_wre6606
+include $(SUBTARGET).mk
$(eval $(call BuildImage))
diff --git a/target/linux/ipq40xx/image/Makefile b/target/linux/ipq40xx/image/generic.mk
similarity index 98%
copy from target/linux/ipq40xx/image/Makefile
copy to target/linux/ipq40xx/image/generic.mk
index f10ff002dc..9cd50e23ff 100644
--- a/target/linux/ipq40xx/image/Makefile
+++ b/target/linux/ipq40xx/image/generic.mk
@@ -1,23 +1,8 @@
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/image.mk
DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
DEVICE_VARS += RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
DEVICE_VARS += WRGG_DEVNAME WRGG_SIGNATURE
-define Device/Default
- PROFILES := Default
- KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
- KERNEL_INITRAMFS_PREFIX := $$(IMG_PREFIX)-$(1)-initramfs
- KERNEL_PREFIX := $$(IMAGE_PREFIX)
- KERNEL_LOADADDR := 0x80208000
- DEVICE_DTS = $$(SOC)-$(lastword $(subst _, ,$(1)))
- SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
- IMAGES := sysupgrade.bin
- IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
- IMAGE/sysupgrade.bin/squashfs :=
-endef
-
define Device/FitImage
KERNEL_SUFFIX := -fit-uImage.itb
KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
More information about the lede-commits
mailing list