[openwrt/openwrt] kirkwood: update config for kernel 5.10

[LEDE Commits]

adrian pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/1bb3f593ee73288dcc0471ae038638a50b750ee4

commit 1bb3f593ee73288dcc0471ae038638a50b750ee4
Author: Sungbo Eo <mans0n at gorani.run>
AuthorDate: Wed Feb 17 22:27:47 2021 +0900

    kirkwood: update config for kernel 5.10
    
    Update config with make kernel_oldconfig.
    
    CONFIG_SATA_PMP=y is added manually as done for 5.4.
    This should be resolved properly in a separate issue.
    
    Signed-off-by: Sungbo Eo <mans0n at gorani.run>
    [add back CONFIG_SATA_PMP, rebase/refresh]
    Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
---
 target/linux/kirkwood/config-5.10 | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/target/linux/kirkwood/config-5.10 b/target/linux/kirkwood/config-5.10
index 2ef4c05074..ad8cf89182 100644
--- a/target/linux/kirkwood/config-5.10
+++ b/target/linux/kirkwood/config-5.10
@@ -1,6 +1,5 @@
 CONFIG_ALIGNMENT_TRAP=y
 CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_KEEP_MEMBLOCK=y
 CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
@@ -13,6 +12,8 @@ CONFIG_ARCH_MULTI_V5=y
 CONFIG_ARCH_MVEBU=y
 CONFIG_ARCH_NR_GPIO=0
 CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_ARM=y
 # CONFIG_ARMADA_37XX_WATCHDOG is not set
@@ -54,6 +55,7 @@ CONFIG_CPU_IDLE=y
 CONFIG_CPU_IDLE_GOV_LADDER=y
 CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_PM=y
+CONFIG_CPU_THERMAL=y
 CONFIG_CPU_THUMB_CAPABLE=y
 CONFIG_CPU_TLB_FEROCEON=y
 CONFIG_CPU_USE_DOMAINS=y
@@ -64,6 +66,7 @@ CONFIG_CRYPTO_ACOMP2=y
 CONFIG_CRYPTO_CRC32C=y
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_DEV_MARVELL=y
 CONFIG_CRYPTO_DEV_MARVELL_CESA=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
@@ -77,13 +80,12 @@ CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
 CONFIG_DEBUG_MVEBU_UART0_ALTERNATE=y
 # CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set
 CONFIG_DEBUG_UART_8250=y
-# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
 CONFIG_DEBUG_UART_8250_SHIFT=2
-# CONFIG_DEBUG_UART_8250_WORD is not set
 CONFIG_DEBUG_UART_PHYS=0xf1012000
 CONFIG_DEBUG_UART_VIRT=0xfed12000
 CONFIG_DEBUG_UNCOMPRESS=y
 # CONFIG_DLCI is not set
+CONFIG_DMA_OPS=y
 CONFIG_DMA_REMAP=y
 CONFIG_DNOTIFY=y
 CONFIG_DTC=y
@@ -144,6 +146,7 @@ CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_NETXBIG=y
 CONFIG_LEDS_NS2=y
 CONFIG_LIBFDT=y
+CONFIG_LLD_VERSION=0
 CONFIG_LOCK_DEBUGGING_SUPPORT=y
 CONFIG_LZO_COMPRESS=y
 CONFIG_LZO_DECOMPRESS=y
@@ -159,6 +162,7 @@ CONFIG_MODULES_USE_ELF_REL=y
 # CONFIG_MTD_CFI is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_NAND_CORE=y
+CONFIG_MTD_NAND_ECC=y
 CONFIG_MTD_NAND_ECC_SW_HAMMING=y
 # CONFIG_MTD_NAND_MARVELL is not set
 CONFIG_MTD_NAND_ORION=y
@@ -180,7 +184,6 @@ CONFIG_NET_DEVLINK=y
 CONFIG_NET_DSA=y
 CONFIG_NET_DSA_MV88E6XXX=y
 CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y
-# CONFIG_NET_DSA_MV88E6XXX_PTP is not set
 CONFIG_NET_DSA_TAG_DSA=y
 CONFIG_NET_DSA_TAG_EDSA=y
 CONFIG_NET_SWITCHDEV=y
@@ -225,7 +228,6 @@ CONFIG_POWER_RESET_GPIO=y
 # CONFIG_POWER_RESET_QNAP is not set
 CONFIG_POWER_SUPPLY=y
 CONFIG_RATIONAL=y
-CONFIG_REFCOUNT_FULL=y
 CONFIG_REGMAP=y
 CONFIG_REGMAP_MMIO=y
 CONFIG_REGULATOR=y