[openwrt/openwrt] ath79: fix USB power GPIO for TP-Link TL-WR810N v1

[LEDE Commits]

adrian pushed a commit to openwrt/openwrt.git, branch openwrt-19.07:
https://git.openwrt.org/2eb8444363c15558761699fe6a5ba926b49a780d

commit 2eb8444363c15558761699fe6a5ba926b49a780d
Author: Adrian Schmutzler <freifunk at adrianschmutzler.de>
AuthorDate: Sat Jan 2 15:05:13 2021 +0100

    ath79: fix USB power GPIO for TP-Link TL-WR810N v1
    
    The TP-Link TL-WR810N v1 is known to cause soft-brick on ath79 and
    work fine for ar71xx [1]. On closer inspection, the only apparent
    difference is the GPIO used for the USB regulator, which deviates
    between the two targets.
    
    This applies the value from ar71xx to ath79.
    
    Tested successfully by a forum user.
    
    [1] https://forum.openwrt.org/t/tp-link-tl-wr810n-v1-ath79/48267
    
    Fixes: cdbf2de77768 ("ath79: Add support for TP-Link WR810N")
    Fixes: FS#3522
    
    Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
    (cherry picked from commit 6934d30cf8d95bc8652b4dcd8180d14e5e8e2417)
---
 target/linux/ath79/dts/qca9531_tplink_tl-wr810n-v1.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/target/linux/ath79/dts/qca9531_tplink_tl-wr810n-v1.dts b/target/linux/ath79/dts/qca9531_tplink_tl-wr810n-v1.dts
index 7d77352f84..4190ceb281 100644
--- a/target/linux/ath79/dts/qca9531_tplink_tl-wr810n-v1.dts
+++ b/target/linux/ath79/dts/qca9531_tplink_tl-wr810n-v1.dts
@@ -15,7 +15,7 @@
 		regulator-name = "usb_vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio 11 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 };