[openwrt/openwrt] Move mvswitch 88E6060 driver to the ath25

Mon Dec 27 08:25:06 PST 2021

dangole pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/0b2c1d8b9a2d68e3059698e3d6c82dfb32a9cbc9

commit 0b2c1d8b9a2d68e3059698e3d6c82dfb32a9cbc9
Author: Sergey Ryazanov <ryazanov.s.a at gmail.com>
AuthorDate: Sun Dec 19 17:31:51 2021 +0300

    Move mvswitch 88E6060 driver to the ath25
    
    ath25 requires a 88E6060 driver to support boards such as Fonera 2.0g
    (FON2202). The swconfig based mvswitch driver has not yet been ported to
    the 5.10 kernel as the only user is the ath25 target while all other
    targets have been switched to the upstream DSA implementation.
    
    Switching ath25 to the DSA implementation is a complex task, since we
    need either per-board platform data or DTS support. ath25 lacks both of
    them and builds only a single generic image. So we need to keep the
    swconfig driver implementation to easly and quickly port ath25 to the
    5.10 kernel.
    
    Since porting the mvswitch driver to 5.10 as a generic driver is not an
    option, and since the ath25 is its only user, make mvswitch a target
    specific driver to be able to port it to the 5.10 kernel as part of the
    kernel version update of the target. This will allow us quickly migrate
    to the next kernel version and not delay the next firmware release.
    
    Suggested-by: Felix Fietkau <nbd at nbd.name>
    Signed-off-by: Sergey Ryazanov <ryazanov.s.a at gmail.com>
---
 .../files/drivers/net/phy/mvswitch.c               |  0
 .../files/drivers/net/phy/mvswitch.h               |  0
 .../ath25/patches-5.4/700-swconfig_mvswitch.patch  | 23 ++++++++++++++++++++++
 target/linux/generic/config-5.10                   |  1 -
 target/linux/generic/config-5.4                    |  1 -
 .../hack-5.4/700-swconfig_switch_drivers.patch     |  9 ++-------
 6 files changed, 25 insertions(+), 9 deletions(-)

diff --git a/target/linux/generic/files/drivers/net/phy/mvswitch.c b/target/linux/ath25/files/drivers/net/phy/mvswitch.c
similarity index 100%
rename from target/linux/generic/files/drivers/net/phy/mvswitch.c
rename to target/linux/ath25/files/drivers/net/phy/mvswitch.c
diff --git a/target/linux/generic/files/drivers/net/phy/mvswitch.h b/target/linux/ath25/files/drivers/net/phy/mvswitch.h
similarity index 100%
rename from target/linux/generic/files/drivers/net/phy/mvswitch.h
rename to target/linux/ath25/files/drivers/net/phy/mvswitch.h
diff --git a/target/linux/ath25/patches-5.4/700-swconfig_mvswitch.patch b/target/linux/ath25/patches-5.4/700-swconfig_mvswitch.patch
new file mode 100644
index 0000000000..7f2c082432
--- /dev/null
+++ b/target/linux/ath25/patches-5.4/700-swconfig_mvswitch.patch
@@ -0,0 +1,23 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -284,6 +284,10 @@ config IP17XX_PHY
+ 	tristate "Driver for IC+ IP17xx switches"
+ 	select SWCONFIG
+ 
++config MVSWITCH_PHY
++	tristate "Driver for Marvell 88E6060 switches"
++	select ETHERNET_PACKET_MANGLE
++
+ config PSB6970_PHY
+ 	tristate "Lantiq XWAY Tantos (PSB6970) Ethernet switch"
+ 	select SWCONFIG
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -27,6 +27,7 @@ obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
+ obj-$(CONFIG_AR8216_PHY)	+= ar8216.o ar8327.o
+ obj-$(CONFIG_SWCONFIG_B53)	+= b53/
+ obj-$(CONFIG_IP17XX_PHY)	+= ip17xx.o
++obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
+ obj-$(CONFIG_PSB6970_PHY)	+= psb6970.o
+ obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
+ obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi.o
diff --git a/target/linux/generic/config-5.10 b/target/linux/generic/config-5.10
index 27e3e90488..c37e33b13d 100644
--- a/target/linux/generic/config-5.10
+++ b/target/linux/generic/config-5.10
@@ -3675,7 +3675,6 @@ CONFIG_MULTIUSER=y
 # CONFIG_MVMDIO is not set
 # CONFIG_MVNETA_BM is not set
 # CONFIG_MVSW61XX_PHY is not set
-# CONFIG_MVSWITCH_PHY is not set
 # CONFIG_MV_XOR_V2 is not set
 # CONFIG_MWAVE is not set
 # CONFIG_MWL8K is not set
diff --git a/target/linux/generic/config-5.4 b/target/linux/generic/config-5.4
index c452d263c5..1b3f896514 100644
--- a/target/linux/generic/config-5.4
+++ b/target/linux/generic/config-5.4
@@ -3343,7 +3343,6 @@ CONFIG_MULTIUSER=y
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_MVMDIO is not set
 # CONFIG_MVNETA_BM is not set
-# CONFIG_MVSWITCH_PHY is not set
 # CONFIG_MV_XOR_V2 is not set
 # CONFIG_MWAVE is not set
 # CONFIG_MWL8K is not set
diff --git a/target/linux/generic/hack-5.4/700-swconfig_switch_drivers.patch b/target/linux/generic/hack-5.4/700-swconfig_switch_drivers.patch
index f30ad81e4e..b954bbb63e 100644
--- a/target/linux/generic/hack-5.4/700-swconfig_switch_drivers.patch
+++ b/target/linux/generic/hack-5.4/700-swconfig_switch_drivers.patch
@@ -12,7 +12,7 @@ Signed-off-by: Felix Fietkau <nbd at nbd.name>
 
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -250,6 +250,85 @@ config LED_TRIGGER_PHY
+@@ -250,6 +250,81 @@ config LED_TRIGGER_PHY
  		for any speed known to the PHY.
  
  
@@ -50,10 +50,6 @@ Signed-off-by: Felix Fietkau <nbd at nbd.name>
 +	tristate "Driver for IC+ IP17xx switches"
 +	select SWCONFIG
 +
-+config MVSWITCH_PHY
-+	tristate "Driver for Marvell 88E6060 switches"
-+	select ETHERNET_PACKET_MANGLE
-+
 +config PSB6970_PHY
 +	tristate "Lantiq XWAY Tantos (PSB6970) Ethernet switch"
 +	select SWCONFIG
@@ -100,7 +96,7 @@ Signed-off-by: Felix Fietkau <nbd at nbd.name>
  config SFP
 --- a/drivers/net/phy/Makefile
 +++ b/drivers/net/phy/Makefile
-@@ -22,6 +22,20 @@ libphy-$(CONFIG_LED_TRIGGER_PHY)	+= phy_
+@@ -22,6 +22,19 @@ libphy-$(CONFIG_LED_TRIGGER_PHY)	+= phy_
  obj-$(CONFIG_PHYLINK)		+= phylink.o
  obj-$(CONFIG_PHYLIB)		+= libphy.o
  
@@ -109,7 +105,6 @@ Signed-off-by: Felix Fietkau <nbd at nbd.name>
 +obj-$(CONFIG_AR8216_PHY)	+= ar8216.o ar8327.o
 +obj-$(CONFIG_SWCONFIG_B53)	+= b53/
 +obj-$(CONFIG_IP17XX_PHY)	+= ip17xx.o
-+obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
 +obj-$(CONFIG_PSB6970_PHY)	+= psb6970.o
 +obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
 +obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi.o

