[openwrt/openwrt] mvebu: puzzle: wan LED and fix default network

[LEDE Commits]

dangole pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/f9782f5bcd13e419abf9c84017ada27fa9764011

commit f9782f5bcd13e419abf9c84017ada27fa9764011
Author: Daniel Golle <daniel at makrotopia.org>
AuthorDate: Thu Dec 23 19:01:48 2021 +0000

    mvebu: puzzle: wan LED and fix default network
    
    Fix default network configuration of the Puzzle-M902 so all LAN ports
    are included in the LAN bridge.
    Setup network LED to indicate WAN port link status, like vendor
    firmware does as well.
    
    Signed-off-by: Daniel Golle <daniel at makrotopia.org>
---
 .../mvebu/cortexa72/base-files/etc/board.d/01_leds   | 20 ++++++++++++++++++++
 .../cortexa72/base-files/etc/board.d/02_network      |  2 +-
 2 files changed, 21 insertions(+), 1 deletion(-)

diff --git a/target/linux/mvebu/cortexa72/base-files/etc/board.d/01_leds b/target/linux/mvebu/cortexa72/base-files/etc/board.d/01_leds
new file mode 100644
index 0000000000..809a64a60e
--- /dev/null
+++ b/target/linux/mvebu/cortexa72/base-files/etc/board.d/01_leds
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+iei,puzzle-m901)
+	ucidef_set_led_netdev "wan" "WAN" "white:network" "eth0" "link"
+	;;
+iei,puzzle-m902)
+	ucidef_set_led_netdev "wan" "WAN" "white:network" "eth2" "link"
+	;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network b/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network
old mode 100755
new mode 100644
index 24a72f336a..f3c59bf2ad
--- a/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network
+++ b/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network
@@ -17,7 +17,7 @@ iei,puzzle-m901)
 	ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4 eth5" "eth0"
 	;;
 iei,puzzle-m902)
-	ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4 eth5 eth10 eth11 eth12" "eth0"
+	ucidef_set_interfaces_lan_wan "eth0 eth1 eth3 eth4 eth5 eth6 eth7 eth8" "eth2"
 	;;
 marvell,armada8040-mcbin-doubleshot|\
 marvell,armada8040-mcbin-singleshot)