[openwrt/openwrt] ramips: add support for HUMAX E10
LEDE Commits
lede-commits at lists.infradead.org
Sun Dec 12 03:38:42 PST 2021
mans0n pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/9a1b9a42b793104bd65bfd292d4935b061d5da33
commit 9a1b9a42b793104bd65bfd292d4935b061d5da33
Author: Kyoungkyu Park <choryu.park at choryu.space>
AuthorDate: Sun Nov 14 01:03:24 2021 +0900
ramips: add support for HUMAX E10
HUMAX E10 (also known as HUMAX QUANTUM E10) is a 2.4/5GHz band AC router,
based on MediaTek MT7621A.
Specifications:
- SoC: MT7621A
- RAM: DDR3 128MB
- Flash: SPI NOR 16MB (MXIC MX25L12805D)
- WiFi:
- 2.4GHz: MT7615
- 5GHz: MT7615
- Ethernet: 2x 10/100/1000Mbps
- Switch: SoC internal
- USB: 1x USB 2.0 Type-A
- UART: J1 (57600 8N1)
- pinout: [3V3] (RXD) (GND) (TXD)
Installation via web interface:
- Flash **factory** image through the stock web interface.
Recovery procedure:
1. Connect ethernet cable between Router **LAN** port and PC Ethernet port.
2. Set your computer to a static IP **192.168.1.1**
3. Turn the device off and wait a few seconds. Hold the WPS button on front
of device and insert power.
4. Send a firmware image to **192.168.1.6** using TFTP.
You can use any TFTP client. (tftp, curl, Tftpd64...)
- It can accept both images which is
HUMAX stock firmware dump (0x70000-0x1000000) image
and OpenWRT **sysupgrade** image.
Signed-off-by: Kyoungkyu Park <choryu.park at choryu.space>
[remove trailing whitespace]
Signed-off-by: Sungbo Eo <mans0n at gorani.run>
---
target/linux/ramips/dts/mt7621_humax_e10.dts | 170 +++++++++++++++++++++
target/linux/ramips/image/mt7621.mk | 19 +++
.../mt7621/base-files/etc/board.d/02_network | 1 +
3 files changed, 190 insertions(+)
diff --git a/target/linux/ramips/dts/mt7621_humax_e10.dts b/target/linux/ramips/dts/mt7621_humax_e10.dts
new file mode 100644
index 0000000000..41587629c0
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_humax_e10.dts
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
+
+/ {
+ compatible = "humax,e10", "mediatek,mt7621-soc";
+ model = "HUMAX E10";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ label-mac-device = &wan;
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ gpio-usb-power {
+ gpio-export,name = "power:usb";
+ gpio-export,output = <1>;
+ gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ pairing {
+ label = "green:pairing";
+ gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps {
+ label = "green:wps";
+ gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps-reset {
+ label = "wps_reset";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition at 30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition at 40000 {
+ label = "factory";
+ reg = <0x40000 0x30000>;
+ read-only;
+ };
+
+ partition at 70000 {
+ compatible = "openwrt,uimage", "denx,uimage";
+ openwrt,offset = <FW_EDIMAX_OFFSET>;
+ openwrt,partition-magic = <FW_MAGIC_EDIMAX>;
+ label = "firmware";
+ reg = <0x70000 0xf90000>;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi at 0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ ieee80211-freq-limit = <2400000 2500000>;
+ };
+};
+
+&pcie1 {
+ wifi at 0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+&gmac0 {
+ nvmem-cells = <&macaddr_factory_10007>;
+ nvmem-cell-names = "mac-address";
+};
+
+&switch0 {
+ ports {
+ wan: port at 0 {
+ status = "okay";
+ label = "wan";
+ nvmem-cells = <&macaddr_factory_1000d>;
+ nvmem-cell-names = "mac-address";
+ };
+
+ port at 1 {
+ status = "okay";
+ label = "lan";
+ };
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "jtag", "uart2", "uart3", "wdt";
+ function = "gpio";
+ };
+};
+
+&factory {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_factory_10007: macaddr at 10007 {
+ reg = <0x10007 0x6>;
+ };
+
+ macaddr_factory_1000d: macaddr at 1000d {
+ reg = <0x1000d 0x6>;
+ };
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 8b156c2a1c..35c5627264 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -637,6 +637,25 @@ define Device/hiwifi_hc5962
endef
TARGET_DEVICES += hiwifi_hc5962
+define Device/humax_e10
+ $(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
+ IMAGE_SIZE := 15936k
+ DEVICE_VENDOR := HUMAX
+ DEVICE_MODEL := E10
+ DEVICE_ALT0_VENDOR := HUMAX
+ DEVICE_ALT0_MODEL := QUANTUM E10
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
+ edimax-header -s CSYS -m EA03 -f 0x70000 -S 0x01100000 | pad-rootfs | \
+ check-size | append-metadata
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-kernel | append-rootfs | pad-rootfs | \
+ edimax-header -s CSYS -m EA03 -f 0x70000 -S 0x01100000 | \
+ check-size | zip upg -P f013c26cf0a320fb71d03356dcb6bb63
+ DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware kmod-usb3
+endef
+TARGET_DEVICES += humax_e10
+
define Device/iodata_wn-ax1167gr
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index 47f978baf8..342704ee30 100644
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -30,6 +30,7 @@ ramips_setup_interfaces()
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
;;
asiarf,ap7621-001|\
+ humax,e10|\
winstars,ws-wn583a6)
ucidef_set_interfaces_lan_wan "lan" "wan"
;;
More information about the lede-commits
mailing list