[openwrt/openwrt] bcm53xx: sysupgrade: refactor handling different firmware formats
LEDE Commits
lede-commits at lists.infradead.org
Thu Dec 2 00:17:10 PST 2021
rmilecki pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/80041dea7094f46f9ef5402964c95b0a5dcd5f28
commit 80041dea7094f46f9ef5402964c95b0a5dcd5f28
Author: Rafał Miłecki <rafal at milecki.pl>
AuthorDate: Sun Nov 28 11:54:19 2021 +0100
bcm53xx: sysupgrade: refactor handling different firmware formats
List of supported formats grew over time and implementation got a bit
messy. There are multiple functions with format-specific parameters and
commands.
Refactor it by making platform_identify() setup all required info right
after detecting firmware format. This simplifies formats handling in
platform_other_check_image() and platform_do_upgrade() a lot.
This has been tested on:
1. SmartRG SR400ac (TRX): non-NAND sysupgrade
2. Netgear R8000 (CHK): NAND aware and standard sysupgrade-s
3. D-Link DIR-885L (Seama): NAND aware and standard sysupgrade-s
4. Luxul XWR-3150 (LXL): NAND aware and standard sysupgrade-s
Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
---
.../bcm53xx/base-files/lib/upgrade/platform.sh | 288 +++++++++------------
1 file changed, 123 insertions(+), 165 deletions(-)
diff --git a/target/linux/bcm53xx/base-files/lib/upgrade/platform.sh b/target/linux/bcm53xx/base-files/lib/upgrade/platform.sh
index 0973e4048b..512dad1891 100644
--- a/target/linux/bcm53xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/bcm53xx/base-files/lib/upgrade/platform.sh
@@ -2,6 +2,12 @@ RAMFS_COPY_BIN='osafeloader oseama otrx truncate'
PART_NAME=firmware
+BCM53XX_FW_FORMAT=
+BCM53XX_FW_BOARD_ID=
+BCM53XX_FW_INT_IMG_FORMAT=
+BCM53XX_FW_INT_IMG_TRX_OFFSET=
+BCM53XX_FW_INT_IMG_EXTRACT_CMD=
+
LXL_FLAGS_VENDOR_LUXUL=0x00000001
# $(1): file to read magic from
@@ -30,7 +36,7 @@ platform_expected_image() {
local machine=$(board_name)
case "$machine" in
- "dlink,dir-885l") echo "seama wrgac42_dlink.2015_dir885l"; return;;
+ "dlink,dir-885l") echo "seamaseal wrgac42_dlink.2015_dir885l"; return;;
"luxul,abr-4500-v1") echo "lxl ABR-4500"; return;;
"luxul,xap-810-v1") echo "lxl XAP-810"; return;;
"luxul,xap-1410v1") echo "lxl XAP-1410"; return;;
@@ -59,169 +65,126 @@ platform_identify() {
magic=$(get_magic_long "$1")
case "$magic" in
"48445230")
- echo "trx"
+ BCM53XX_FW_FORMAT="trx"
return
;;
"2a23245e")
- echo "chk"
+ local header_len=$((0x$(get_magic_long_at "$1" 4)))
+ local board_id_len=$(($header_len - 40))
+
+ BCM53XX_FW_FORMAT="chk"
+ BCM53XX_FW_BOARD_ID=$(dd if="$1" skip=40 bs=1 count=$board_id_len 2>/dev/null | hexdump -v -e '1/1 "%c"')
+ BCM53XX_FW_INT_IMG_FORMAT="trx"
+ BCM53XX_FW_INT_IMG_TRX_OFFSET="$header_len"
+ BCM53XX_FW_INT_IMG_EXTRACT_CMD="dd skip=$header_len iflag=skip_bytes"
return
;;
"4c584c23")
- echo "lxl"
+ local hdr_len=$(get_le_long_at "$1" 8)
+ local flags=$(get_le_long_at "$1" 12)
+
+ [ $((flags & LXL_FLAGS_VENDOR_LUXUL)) -gt 0 ] && notify_firmware_no_backup
+
+ BCM53XX_FW_FORMAT="lxl"
+ BCM53XX_FW_BOARD_ID=$(dd if="$1" skip=16 bs=1 count=16 2>/dev/null | hexdump -v -e '1/1 "%c"')
+ BCM53XX_FW_INT_IMG_FORMAT="trx"
+ BCM53XX_FW_INT_IMG_TRX_OFFSET="$hdr_len"
+ BCM53XX_FW_INT_IMG_EXTRACT_CMD="dd skip=$hdr_len iflag=skip_bytes"
+
return
;;
"5ea3a417")
- echo "seama"
+ BCM53XX_FW_FORMAT="seamaseal"
+ BCM53XX_FW_BOARD_ID=$(oseama info "$1" | grep "Meta entry:.*signature=" | sed "s/.*=//")
+ BCM53XX_FW_INT_IMG_EXTRACT_CMD="oseama extract - -e 0"
return
;;
esac
magic=$(get_magic_long_at "$1" 14)
[ "$magic" = "55324e44" ] && {
- echo "cybertan"
+ BCM53XX_FW_FORMAT="cybertan"
+ BCM53XX_FW_BOARD_ID=$(dd if="$1" bs=1 count=4 2>/dev/null | hexdump -v -e '1/1 "%c"')
+ BCM53XX_FW_INT_IMG_FORMAT="trx"
+ BCM53XX_FW_INT_IMG_TRX_OFFSET="32"
+ BCM53XX_FW_INT_IMG_EXTRACT_CMD="dd skip=32 iflag=skip_bytes"
return
}
magic=$(get_magic_long_at "$1" 60)
[ "$magic" = "4c584c23" ] && {
- echo "lxlold"
+ notify_firmware_no_backup
+
+ BCM53XX_FW_FORMAT="lxlold"
+ BCM53XX_FW_BOARD_ID=$(dd if="$1" skip=48 bs=1 count=12 2>/dev/null | hexdump -v -e '1/1 "%c"')
+ BCM53XX_FW_INT_IMG_FORMAT="trx"
+ BCM53XX_FW_INT_IMG_TRX_OFFSET="64"
+ BCM53XX_FW_INT_IMG_EXTRACT_CMD="dd skip=64 iflag=skip_bytes"
return
}
if osafeloader info "$1" > /dev/null 2>&1; then
- echo "safeloader"
+ BCM53XX_FW_FORMAT="safeloader"
return
fi
-
- echo "unknown"
}
platform_other_check_image() {
[ "$#" -gt 1 ] && return 1
- local file_type=$(platform_identify "$1")
- local magic
local error=0
- case "$file_type" in
- "chk")
- local header_len=$((0x$(get_magic_long_at "$1" 4)))
- local board_id_len=$(($header_len - 40))
- local board_id=$(dd if="$1" skip=40 bs=1 count=$board_id_len 2>/dev/null | hexdump -v -e '1/1 "%c"')
- local dev_board_id=$(platform_expected_image)
- echo "Found CHK image with device board_id $board_id"
-
- [ -n "$dev_board_id" -a "chk $board_id" != "$dev_board_id" ] && {
- echo "Firmware board_id doesn't match device board_id ($dev_board_id)"
- error=1
- }
-
- if ! otrx check "$1" -o "$header_len"; then
- echo "No valid TRX firmware in the CHK image"
- notify_firmware_test_result "trx_valid" 0
- error=1
- else
- notify_firmware_test_result "trx_valid" 1
- fi
- ;;
- "cybertan")
- local pattern=$(dd if="$1" bs=1 count=4 2>/dev/null | hexdump -v -e '1/1 "%c"')
- local dev_pattern=$(platform_expected_image)
- echo "Found CyberTAN image with device pattern: $pattern"
-
- [ -n "$dev_pattern" -a "cybertan $pattern" != "$dev_pattern" ] && {
- echo "Firmware pattern doesn't match device pattern ($dev_pattern)"
- error=1
- }
-
- if ! otrx check "$1" -o 32; then
- echo "No valid TRX firmware in the CyberTAN image"
- notify_firmware_test_result "trx_valid" 0
- error=1
- else
- notify_firmware_test_result "trx_valid" 1
- fi
- ;;
- "lxl")
- local hdr_len=$(get_le_long_at "$1" 8)
- local flags=$(get_le_long_at "$1" 12)
- local board=$(dd if="$1" skip=16 bs=1 count=16 2>/dev/null | hexdump -v -e '1/1 "%c"')
- local dev_board=$(platform_expected_image)
- echo "Found LXL image for board $board"
-
- [ -n "$dev_board" -a "lxl $board" != "$dev_board" ] && {
- echo "Firmware ($board) doesn't match device ($dev_board)"
- error=1
- }
-
- [ $((flags & LXL_FLAGS_VENDOR_LUXUL)) -gt 0 ] && notify_firmware_no_backup
+ platform_identify "$1"
+ [ -z "$BCM53XX_FW_FORMAT" ] && {
+ echo "Invalid image type. Please use firmware specific for this device."
+ notify_firmware_broken
+ return 1
+ }
+ echo "Found $BCM53XX_FW_FORMAT firmware for device $BCM53XX_FW_BOARD_ID"
- if ! otrx check "$1" -o "$hdr_len"; then
- echo "No valid TRX firmware in the LXL image"
- notify_firmware_test_result "trx_valid" 0
- error=1
- else
- notify_firmware_test_result "trx_valid" 1
- fi
- ;;
- "lxlold")
- local board_id=$(dd if="$1" skip=48 bs=1 count=12 2>/dev/null | hexdump -v -e '1/1 "%c"')
- local dev_board_id=$(platform_expected_image)
- echo "Found LXL image with device board_id $board_id"
+ local expected_image="$(platform_expected_image)"
+ [ -n "$expected_image" -a -n "$BCM53XX_FW_BOARD_ID" -a "$expected_image" != "$BCM53XX_FW_FORMAT $BCM53XX_FW_BOARD_ID" ] && {
+ echo "Firmware doesn't match device ($expected_image)"
+ error=1
+ }
- [ -n "$dev_board_id" -a "lxl $board_id" != "$dev_board_id" ] && {
- echo "Firmware board_id doesn't match device board_id ($dev_board_id)"
+ case "$BCM53XX_FW_FORMAT" in
+ "seamaseal")
+ $(oseama info "$1" -e 0 | grep -q "Meta entry:.*type=firmware") || {
+ echo "Seama seal doesn't contain firmware entity"
error=1
}
-
- notify_firmware_no_backup
-
- if ! otrx check "$1" -o 64; then
- echo "No valid TRX firmware in the Luxul image"
+ ;;
+ "trx")
+ if ! otrx check "$1"; then
+ echo "Failed to find a valid TRX in firmware"
notify_firmware_test_result "trx_valid" 0
error=1
else
notify_firmware_test_result "trx_valid" 1
fi
- ;;
- "safeloader")
- ;;
- "seama")
- local img_signature=$(oseama info "$1" | grep "Meta entry:.*signature=" | sed "s/.*=//")
- local dev_signature=$(platform_expected_image)
- echo "Found Seama image with device signature: $img_signature"
-
- [ -n "$dev_signature" -a "seama $img_signature" != "$dev_signature" ] && {
- echo "Firmware signature doesn't match device signature ($dev_signature)"
- error=1
- }
- $(oseama info "$1" -e 0 | grep -q "Meta entry:.*type=firmware") || {
- echo "Seama container doesn't have firmware entity"
- error=1
- }
- ;;
- "trx")
- local expected=$(platform_expected_image)
-
- [ "$expected" == "safeloader" ] && {
+ [ "$expected_image" == "safeloader" ] && {
echo "This device expects SafeLoader format and may not work with TRX"
error=1
}
-
- if ! otrx check "$1"; then
- echo "Invalid (corrupted?) TRX firmware"
- notify_firmware_test_result "trx_valid" 0
- error=1
- else
- notify_firmware_test_result "trx_valid" 1
- fi
- ;;
+ ;;
*)
- echo "Invalid image type. Please use firmware specific for this device."
- notify_firmware_broken
- error=1
- ;;
+ case "$BCM53XX_FW_INT_IMG_FORMAT" in
+ "trx")
+ # Make sure that both ways of extracting TRX work.
+ # platform_do_upgrade() may use any of them.
+ if ! otrx check "$1" -o "$BCM53XX_FW_INT_IMG_TRX_OFFSET" || \
+ ! $BCM53XX_FW_INT_IMG_EXTRACT_CMD < $1 | otrx check -; then
+ echo "Invalid (corrupted?) TRX firmware"
+ notify_firmware_test_result "trx_valid" 0
+ error=1
+ else
+ notify_firmware_test_result "trx_valid" 1
+ fi
+ ;;
+ esac
+ ;;
esac
return $error
@@ -246,8 +209,8 @@ platform_check_image() {
}
-# $(1): image for upgrade (with possible extra header)
-# $(2): offset of trx in image
+# $(1): TRX image or firmware containing TRX
+# $(2): offset of TRX in firmware (optional)
platform_do_upgrade_nand_trx() {
local dir="/tmp/sysupgrade-bcm53xx"
local trx="$1"
@@ -311,15 +274,15 @@ platform_do_upgrade_nand_trx() {
nand_do_upgrade $dir/root
}
-platform_do_upgrade_nand_seama() {
+platform_do_upgrade_nand_seamaseal() {
local dir="/tmp/sysupgrade-bcm53xx"
- local seama="$1"
+ local seamaseal="$1"
local tmp
# Extract Seama entity from Seama seal
rm -fR $dir
mkdir -p $dir
- oseama extract "$seama" \
+ oseama extract "$seamaseal" \
-e 0 \
-o $dir/seama.entity
[ $? -ne 0 ] && {
@@ -358,26 +321,6 @@ platform_do_upgrade_nand_seama() {
nand_do_upgrade $dir/root.ubi
}
-platform_trx_from_chk_cmd() {
- local header_len=$((0x$(get_magic_long_at "$1" 4)))
-
- echo -n dd skip=$header_len iflag=skip_bytes
-}
-
-platform_trx_from_cybertan_cmd() {
- echo -n dd skip=32 iflag=skip_bytes
-}
-
-platform_trx_from_lxl_cmd() {
- local hdr_len=$(get_le_long_at "$1" 8)
-
- echo -n dd skip=$hdr_len iflag=skip_bytes
-}
-
-platform_trx_from_lxlold_cmd() {
- echo -n dd bs=64 skip=1
-}
-
platform_img_from_safeloader() {
local dir="/tmp/sysupgrade-bcm53xx"
@@ -396,23 +339,28 @@ platform_img_from_safeloader() {
echo -n $dir/os-image
}
-platform_img_from_seama_cmd() {
- echo -n oseama extract "$1" -e 0
-}
-
platform_other_do_upgrade() {
- local file_type=$(platform_identify "$1")
- local trx="$1"
- local cmd=
+ platform_identify "$1"
[ "$(platform_flash_type)" == "nand" ] && {
- case "$file_type" in
- "chk") platform_do_upgrade_nand_trx "$1" $((0x$(get_magic_long_at "$1" 4)));;
- "cybertan") platform_do_upgrade_nand_trx "$1" 32;;
- "lxl") platform_do_upgrade_nand_trx "$1" $(get_le_long_at "$1" 8);;
- "lxlold") platform_do_upgrade_nand_trx "$1" 64;;
- "seama") platform_do_upgrade_nand_seama "$1";;
- "trx") platform_do_upgrade_nand_trx "$1";;
+ # Try NAND-aware upgrade
+ case "$BCM53XX_FW_FORMAT" in
+ "seamaseal")
+ platform_do_upgrade_nand_seamaseal "$1"
+ ;;
+ "trx")
+ platform_do_upgrade_nand_trx "$1"
+ ;;
+ *)
+ case "$BCM53XX_FW_INT_IMG_FORMAT" in
+ "trx")
+ platform_do_upgrade_nand_trx "$1" "$BCM53XX_FW_INT_IMG_TRX_OFFSET"
+ ;;
+ *)
+ echo "NAND aware sysupgrade is unsupported for $BCM53XX_FW_FORMAT format"
+ ;;
+ esac
+ ;;
esac
# Above calls exit on success.
@@ -420,16 +368,26 @@ platform_other_do_upgrade() {
echo "Writing whole image to NAND flash. All erase counters will be lost."
}
- case "$file_type" in
- "chk") cmd=$(platform_trx_from_chk_cmd "$trx");;
- "cybertan") cmd=$(platform_trx_from_cybertan_cmd "$trx");;
- "lxl") cmd=$(platform_trx_from_lxl_cmd "$trx");;
- "lxlold") cmd=$(platform_trx_from_lxlold_cmd "$trx");;
- "safeloader") trx=$(platform_img_from_safeloader "$trx"); PART_NAME=os-image;;
- "seama") cmd=$(platform_img_from_seama_cmd "$trx");;
+ case "$BCM53XX_FW_FORMAT" in
+ "safeloader")
+ PART_NAME=os-image
+ img=$(platform_img_from_safeloader "$1")
+ default_do_upgrade "$img"
+ ;;
+ "seamaseal")
+ default_do_upgrade "$1" "$BCM53XX_FW_INT_IMG_EXTRACT_CMD"
+ ;;
+ "trx")
+ default_do_upgrade "$1"
+ ;;
+ *)
+ case "$BCM53XX_FW_INT_IMG_FORMAT" in
+ "trx")
+ default_do_upgrade "$1" "$BCM53XX_FW_INT_IMG_EXTRACT_CMD"
+ ;;
+ esac
+ ;;
esac
-
- default_do_upgrade "$trx" "$cmd"
}
platform_do_upgrade() {
More information about the lede-commits
mailing list