[openwrt/openwrt] ramips: gpio-ralink: use ngpios, not ralink, num-gpios
LEDE Commits
lede-commits at lists.infradead.org
Wed Apr 14 17:02:54 BST 2021
981213 pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/85ca6923bc21a7de031ca9b68e13ecfb4f3debd3
commit 85ca6923bc21a7de031ca9b68e13ecfb4f3debd3
Author: Ilya Lipnitskiy <ilya.lipnitskiy at gmail.com>
AuthorDate: Mon Apr 5 22:53:46 2021 -0700
ramips: gpio-ralink: use ngpios, not ralink,num-gpios
DTS properties that match *-gpios are treated specially.
Use ngpios instead, as most GPIO drivers upstream do.
Fixes 5.10 DTS errors such as:
OF: /palmbus at 300000/gpio at 600: could not find phandle
Fixes DTC warnings such as:
Warning (gpios_property): /palmbus at 300000/gpio at 600:ralink,num-gpios:
Could not get phandle node for (cell 0)
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy at gmail.com>
Cc: Daniel Golle <daniel at makrotopia.org>
---
target/linux/ramips/dts/mt7620a.dtsi | 8 ++++----
target/linux/ramips/dts/mt7620n.dtsi | 8 ++++----
target/linux/ramips/dts/rt2880.dtsi | 6 +++---
target/linux/ramips/dts/rt3050.dtsi | 6 +++---
target/linux/ramips/dts/rt3352.dtsi | 6 +++---
target/linux/ramips/dts/rt3883.dtsi | 8 ++++----
target/linux/ramips/dts/rt5350.dtsi | 4 ++--
.../801-DT-Add-documentation-for-gpio-ralink.patch | 4 ++--
.../802-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch | 2 +-
.../804-staging-mt7621-pinctrl-use-ngpios-not-num-gpios.patch | 11 +++++++++++
.../0026-DT-Add-documentation-for-gpio-ralink.patch | 4 ++--
...0027-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch | 2 +-
.../804-staging-mt7621-pinctrl-use-ngpios-not-num-gpios.patch | 11 +++++++++++
13 files changed, 51 insertions(+), 29 deletions(-)
diff --git a/target/linux/ramips/dts/mt7620a.dtsi b/target/linux/ramips/dts/mt7620a.dtsi
index afd638a386..c33dd135fe 100644
--- a/target/linux/ramips/dts/mt7620a.dtsi
+++ b/target/linux/ramips/dts/mt7620a.dtsi
@@ -117,8 +117,8 @@
gpio-controller;
#gpio-cells = <2>;
+ ngpios = <24>;
ralink,gpio-base = <0>;
- ralink,num-gpios = <24>;
ralink,register-map = [ 00 04 08 0c
20 24 28 2c
30 34 ];
@@ -134,8 +134,8 @@
gpio-controller;
#gpio-cells = <2>;
+ ngpios = <16>;
ralink,gpio-base = <24>;
- ralink,num-gpios = <16>;
ralink,register-map = [ 00 04 08 0c
10 14 18 1c
20 24 ];
@@ -153,8 +153,8 @@
gpio-controller;
#gpio-cells = <2>;
+ ngpios = <32>;
ralink,gpio-base = <40>;
- ralink,num-gpios = <32>;
ralink,register-map = [ 00 04 08 0c
10 14 18 1c
20 24 ];
@@ -172,8 +172,8 @@
gpio-controller;
#gpio-cells = <2>;
+ ngpios = <1>;
ralink,gpio-base = <72>;
- ralink,num-gpios = <1>;
ralink,register-map = [ 00 04 08 0c
10 14 18 1c
20 24 ];
diff --git a/target/linux/ramips/dts/mt7620n.dtsi b/target/linux/ramips/dts/mt7620n.dtsi
index 309608adb1..2fac091898 100644
--- a/target/linux/ramips/dts/mt7620n.dtsi
+++ b/target/linux/ramips/dts/mt7620n.dtsi
@@ -102,8 +102,8 @@
gpio-controller;
#gpio-cells = <2>;
+ ngpios = <24>;
ralink,gpio-base = <0>;
- ralink,num-gpios = <24>;
ralink,register-map = [ 00 04 08 0c
20 24 28 2c
30 34 ];
@@ -119,8 +119,8 @@
gpio-controller;
#gpio-cells = <2>;
+ ngpios = <16>;
ralink,gpio-base = <24>;
- ralink,num-gpios = <16>;
ralink,register-map = [ 00 04 08 0c
10 14 18 1c
20 24 ];
@@ -138,8 +138,8 @@
gpio-controller;
#gpio-cells = <2>;
+ ngpios = <32>;
ralink,gpio-base = <40>;
- ralink,num-gpios = <32>;
ralink,register-map = [ 00 04 08 0c
10 14 18 1c
20 24 ];
@@ -157,8 +157,8 @@
gpio-controller;
#gpio-cells = <2>;
+ ngpios = <1>;
ralink,gpio-base = <72>;
- ralink,num-gpios = <1>;
ralink,register-map = [ 00 04 08 0c
10 14 18 1c
20 24 ];
diff --git a/target/linux/ramips/dts/rt2880.dtsi b/target/linux/ramips/dts/rt2880.dtsi
index b02ef4f465..9dd8f3c6e3 100644
--- a/target/linux/ramips/dts/rt2880.dtsi
+++ b/target/linux/ramips/dts/rt2880.dtsi
@@ -81,8 +81,8 @@
gpio-controller;
#gpio-cells = <2>;
+ ngpios = <24>;
ralink,gpio-base = <0>;
- ralink,num-gpios = <24>;
ralink,register-map = [ 00 04 08 0c
20 24 28 2c
30 34 ];
@@ -95,8 +95,8 @@
gpio-controller;
#gpio-cells = <2>;
+ ngpios = <16>;
ralink,gpio-base = <24>;
- ralink,num-gpios = <16>;
ralink,register-map = [ 00 04 08 0c
10 14 18 1c
20 24 ];
@@ -111,8 +111,8 @@
gpio-controller;
#gpio-cells = <2>;
+ ngpios = <32>;
ralink,gpio-base = <40>;
- ralink,num-gpios = <32>;
ralink,register-map = [ 00 04 08 0c
10 14 18 1c
20 24 ];
diff --git a/target/linux/ramips/dts/rt3050.dtsi b/target/linux/ramips/dts/rt3050.dtsi
index 9ba8a4df36..0cecd5d8cf 100644
--- a/target/linux/ramips/dts/rt3050.dtsi
+++ b/target/linux/ramips/dts/rt3050.dtsi
@@ -110,8 +110,8 @@
gpio-controller;
#gpio-cells = <2>;
+ ngpios = <24>;
ralink,gpio-base = <0>;
- ralink,num-gpios = <24>;
ralink,register-map = [ 00 04 08 0c
20 24 28 2c
30 34 ];
@@ -130,8 +130,8 @@
gpio-controller;
#gpio-cells = <2>;
+ ngpios = <16>;
ralink,gpio-base = <24>;
- ralink,num-gpios = <16>;
ralink,register-map = [ 00 04 08 0c
10 14 18 1c
20 24 ];
@@ -146,8 +146,8 @@
gpio-controller;
#gpio-cells = <2>;
+ ngpios = <12>;
ralink,gpio-base = <40>;
- ralink,num-gpios = <12>;
ralink,register-map = [ 00 04 08 0c
10 14 18 1c
20 24 ];
diff --git a/target/linux/ramips/dts/rt3352.dtsi b/target/linux/ramips/dts/rt3352.dtsi
index 054d2e8450..84d6ed5905 100644
--- a/target/linux/ramips/dts/rt3352.dtsi
+++ b/target/linux/ramips/dts/rt3352.dtsi
@@ -108,8 +108,8 @@
gpio-controller;
#gpio-cells = <2>;
+ ngpios = <24>;
ralink,gpio-base = <0>;
- ralink,num-gpios = <24>;
ralink,register-map = [ 00 04 08 0c
20 24 28 2c
30 34 ];
@@ -127,8 +127,8 @@
gpio-controller;
#gpio-cells = <2>;
+ ngpios = <16>;
ralink,gpio-base = <24>;
- ralink,num-gpios = <16>;
ralink,register-map = [ 00 04 08 0c
10 14 18 1c
20 24 ];
@@ -143,8 +143,8 @@
gpio-controller;
#gpio-cells = <2>;
+ ngpios = <6>;
ralink,gpio-base = <40>;
- ralink,num-gpios = <6>;
ralink,register-map = [ 00 04 08 0c
10 14 18 1c
20 24 ];
diff --git a/target/linux/ramips/dts/rt3883.dtsi b/target/linux/ramips/dts/rt3883.dtsi
index 081b52bfd8..158640bf92 100644
--- a/target/linux/ramips/dts/rt3883.dtsi
+++ b/target/linux/ramips/dts/rt3883.dtsi
@@ -117,8 +117,8 @@
gpio-controller;
#gpio-cells = <2>;
+ ngpios = <24>;
ralink,gpio-base = <0>;
- ralink,num-gpios = <24>;
ralink,register-map = [ 00 04 08 0c
20 24 28 2c
30 34 ];
@@ -131,8 +131,8 @@
gpio-controller;
#gpio-cells = <2>;
+ ngpios = <16>;
ralink,gpio-base = <24>;
- ralink,num-gpios = <16>;
ralink,register-map = [ 00 04 08 0c
10 14 18 1c
20 24 ];
@@ -147,8 +147,8 @@
gpio-controller;
#gpio-cells = <2>;
+ ngpios = <32>;
ralink,gpio-base = <40>;
- ralink,num-gpios = <32>;
ralink,register-map = [ 00 04 08 0c
10 14 18 1c
20 24 ];
@@ -163,8 +163,8 @@
gpio-controller;
#gpio-cells = <2>;
+ ngpios = <24>;
ralink,gpio-base = <72>;
- ralink,num-gpios = <24>;
ralink,register-map = [ 00 04 08 0c
10 14 18 1c
20 24 ];
diff --git a/target/linux/ramips/dts/rt5350.dtsi b/target/linux/ramips/dts/rt5350.dtsi
index 579d41456b..ac4c6d9db2 100644
--- a/target/linux/ramips/dts/rt5350.dtsi
+++ b/target/linux/ramips/dts/rt5350.dtsi
@@ -117,8 +117,8 @@
gpio-controller;
#gpio-cells = <2>;
+ ngpios = <22>;
ralink,gpio-base = <0>;
- ralink,num-gpios = <22>;
ralink,register-map = [ 00 04 08 0c
20 24 28 2c
30 34 ];
@@ -134,8 +134,8 @@
gpio-controller;
#gpio-cells = <2>;
+ ngpios = <6>;
ralink,gpio-base = <22>;
- ralink,num-gpios = <6>;
ralink,register-map = [ 00 04 08 0c
10 14 18 1c
20 24 ];
diff --git a/target/linux/ramips/patches-5.10/801-DT-Add-documentation-for-gpio-ralink.patch b/target/linux/ramips/patches-5.10/801-DT-Add-documentation-for-gpio-ralink.patch
index 7d5f98f647..93dabf8776 100644
--- a/target/linux/ramips/patches-5.10/801-DT-Add-documentation-for-gpio-ralink.patch
+++ b/target/linux/ramips/patches-5.10/801-DT-Add-documentation-for-gpio-ralink.patch
@@ -29,7 +29,7 @@ Cc: linux-gpio at vger.kernel.org
+- reg : Physical base address and length of the controller's registers
+- interrupt-parent: phandle to the INTC device node
+- interrupts : Specify the INTC interrupt number
-+- ralink,num-gpios : Specify the number of GPIOs
++- ngpios : Specify the number of GPIOs
+- ralink,register-map : The register layout depends on the GPIO bank and actual
+ SoC type. Register offsets need to be in this order.
+ [ INT, EDGE, RENA, FENA, DATA, DIR, POL, SET, RESET, TOGGLE ]
@@ -50,8 +50,8 @@ Cc: linux-gpio at vger.kernel.org
+ interrupt-parent = <&intc>;
+ interrupts = <6>;
+
++ ngpios = <24>;
+ ralink,gpio-base = <0>;
-+ ralink,num-gpios = <24>;
+ ralink,register-map = [ 00 04 08 0c
+ 20 24 28 2c
+ 30 34 ];
diff --git a/target/linux/ramips/patches-5.10/802-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch b/target/linux/ramips/patches-5.10/802-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch
index 141d29f940..c173336924 100644
--- a/target/linux/ramips/patches-5.10/802-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch
+++ b/target/linux/ramips/patches-5.10/802-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch
@@ -357,7 +357,7 @@ Cc: linux-gpio at vger.kernel.org
+ return -EINVAL;
+ }
+
-+ ngpio = of_get_property(np, "ralink,num-gpios", NULL);
++ ngpio = of_get_property(np, "ngpios", NULL);
+ if (!ngpio) {
+ dev_err(&pdev->dev, "failed to read number of pins\n");
+ return -EINVAL;
diff --git a/target/linux/ramips/patches-5.10/804-staging-mt7621-pinctrl-use-ngpios-not-num-gpios.patch b/target/linux/ramips/patches-5.10/804-staging-mt7621-pinctrl-use-ngpios-not-num-gpios.patch
new file mode 100644
index 0000000000..0d62bd8b03
--- /dev/null
+++ b/target/linux/ramips/patches-5.10/804-staging-mt7621-pinctrl-use-ngpios-not-num-gpios.patch
@@ -0,0 +1,11 @@
+--- a/drivers/staging/mt7621-pinctrl/pinctrl-rt2880.c
++++ b/drivers/staging/mt7621-pinctrl/pinctrl-rt2880.c
+@@ -354,7 +354,7 @@ static int rt2880_pinmux_probe(struct pl
+ if (!of_device_is_available(np))
+ continue;
+
+- ngpio = of_get_property(np, "ralink,num-gpios", NULL);
++ ngpio = of_get_property(np, "ngpios", NULL);
+ gpiobase = of_get_property(np, "ralink,gpio-base", NULL);
+ if (!ngpio || !gpiobase) {
+ dev_err(&pdev->dev, "failed to load chip info\n");
diff --git a/target/linux/ramips/patches-5.4/0026-DT-Add-documentation-for-gpio-ralink.patch b/target/linux/ramips/patches-5.4/0026-DT-Add-documentation-for-gpio-ralink.patch
index 7d5f98f647..93dabf8776 100644
--- a/target/linux/ramips/patches-5.4/0026-DT-Add-documentation-for-gpio-ralink.patch
+++ b/target/linux/ramips/patches-5.4/0026-DT-Add-documentation-for-gpio-ralink.patch
@@ -29,7 +29,7 @@ Cc: linux-gpio at vger.kernel.org
+- reg : Physical base address and length of the controller's registers
+- interrupt-parent: phandle to the INTC device node
+- interrupts : Specify the INTC interrupt number
-+- ralink,num-gpios : Specify the number of GPIOs
++- ngpios : Specify the number of GPIOs
+- ralink,register-map : The register layout depends on the GPIO bank and actual
+ SoC type. Register offsets need to be in this order.
+ [ INT, EDGE, RENA, FENA, DATA, DIR, POL, SET, RESET, TOGGLE ]
@@ -50,8 +50,8 @@ Cc: linux-gpio at vger.kernel.org
+ interrupt-parent = <&intc>;
+ interrupts = <6>;
+
++ ngpios = <24>;
+ ralink,gpio-base = <0>;
-+ ralink,num-gpios = <24>;
+ ralink,register-map = [ 00 04 08 0c
+ 20 24 28 2c
+ 30 34 ];
diff --git a/target/linux/ramips/patches-5.4/0027-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch b/target/linux/ramips/patches-5.4/0027-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch
index eae507bcd7..525c1976f9 100644
--- a/target/linux/ramips/patches-5.4/0027-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch
+++ b/target/linux/ramips/patches-5.4/0027-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch
@@ -357,7 +357,7 @@ Cc: linux-gpio at vger.kernel.org
+ return -EINVAL;
+ }
+
-+ ngpio = of_get_property(np, "ralink,num-gpios", NULL);
++ ngpio = of_get_property(np, "ngpios", NULL);
+ if (!ngpio) {
+ dev_err(&pdev->dev, "failed to read number of pins\n");
+ return -EINVAL;
diff --git a/target/linux/ramips/patches-5.4/804-staging-mt7621-pinctrl-use-ngpios-not-num-gpios.patch b/target/linux/ramips/patches-5.4/804-staging-mt7621-pinctrl-use-ngpios-not-num-gpios.patch
new file mode 100644
index 0000000000..0d62bd8b03
--- /dev/null
+++ b/target/linux/ramips/patches-5.4/804-staging-mt7621-pinctrl-use-ngpios-not-num-gpios.patch
@@ -0,0 +1,11 @@
+--- a/drivers/staging/mt7621-pinctrl/pinctrl-rt2880.c
++++ b/drivers/staging/mt7621-pinctrl/pinctrl-rt2880.c
+@@ -354,7 +354,7 @@ static int rt2880_pinmux_probe(struct pl
+ if (!of_device_is_available(np))
+ continue;
+
+- ngpio = of_get_property(np, "ralink,num-gpios", NULL);
++ ngpio = of_get_property(np, "ngpios", NULL);
+ gpiobase = of_get_property(np, "ralink,gpio-base", NULL);
+ if (!ngpio || !gpiobase) {
+ dev_err(&pdev->dev, "failed to load chip info\n");
More information about the lede-commits
mailing list