[openwrt/openwrt] uboot-mediatek: bpi-r64: erase eMMC environment on installation

[LEDE Commits]

dangole pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/0268f76bbbe716947c46120217bdb4956c8fb7e8

commit 0268f76bbbe716947c46120217bdb4956c8fb7e8
Author: Daniel Golle <daniel at makrotopia.org>
AuthorDate: Fri Apr 9 15:58:57 2021 +0100

    uboot-mediatek: bpi-r64: erase eMMC environment on installation
    
    Erase U-Boot environment partition on eMMC on installation to make sure
    chages are applied.
    
    Signed-off-by: Daniel Golle <daniel at makrotopia.org>
---
 .../uboot-mediatek/patches/403-add-bananapi_bpi-r64_defconfigs.patch    | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/package/boot/uboot-mediatek/patches/403-add-bananapi_bpi-r64_defconfigs.patch b/package/boot/uboot-mediatek/patches/403-add-bananapi_bpi-r64_defconfigs.patch
index b550ae4156..5a251d44a1 100644
--- a/package/boot/uboot-mediatek/patches/403-add-bananapi_bpi-r64_defconfigs.patch
+++ b/package/boot/uboot-mediatek/patches/403-add-bananapi_bpi-r64_defconfigs.patch
@@ -186,7 +186,7 @@
 +boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr
 +emmc_write_bl2=mmc dev 0 1 && mmc partconf 0 1 1 1 && mmc erase 0x0 0x400 && mmc write $loadaddr 0x0 0x100 ; mmc partconf 0 1 1 0
 +emmc_write_hdr=mmc dev 0 0 && mmc erase 0x0 0x40 && mmc write $loadaddr 0x0 0x40
-+emmc_write_bl3=mmc dev 0 0 && mmc erase 0x1000 0x800 && mmc write $loadaddr 0x1000 0x800
++emmc_write_bl3=mmc dev 0 0 && mmc erase 0x1000 0x800 && mmc write $loadaddr 0x1000 0x800 && mmc erase 0x2000 0x800
 +emmc_write_production=iminfo $loadaddr && mmc dev 0 && part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol
 +emmc_write_recovery=iminfo $loadaddr && mmc dev 0 && part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol
 +emmc_init_bl=run sdmmc_read_emmc_bl2 && run emmc_write_bl2 && run sdmmc_read_emmc_hdr && run emmc_write_hdr && run sdmmc_read_emmc_bl3 && run emmc_write_bl3