[openwrt/openwrt] ath79: add support for Wallys DR531
LEDE Commits
lede-commits at lists.infradead.org
Sun Sep 27 19:30:24 EDT 2020
pepe2k pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/c65c306d336418f3b6519693d892148f6e2eb38e
commit c65c306d336418f3b6519693d892148f6e2eb38e
Author: Piotr Dymacz <pepe2k at gmail.com>
AuthorDate: Sun Sep 6 09:52:43 2020 +0200
ath79: add support for Wallys DR531
Wallys DR531 is based on Qualcomm Atheros QCA9531 v2. Support for this
device was first introduced in e767980eb8 (ar71xx target).
Specifications:
- Qualcomm/Atheros QCA9531 v2
- 550/400/200 MHz (CPU/DDR/AHB)
- 2x 10/100 Mbps Ethernet
- 64 MB of RAM (DDR2)
- 8 MB of flash (SPI NOR)
- 2T2R 2.4 GHz Wi-Fi, with external PA (SE2576L), up to 30 dBm
- 2x MMCX connectors (optional IPEX/U.FL)
- mini PCIe connector (PCIe/USB buses and mini SIM slot)
- 7x LED, 1x button, 1x optional buzzer
- UART, JTAG and LED headers on PCB
Flash instruction (do it under U-Boot, using UART):
tftpb 0x80060000 openwrt-ath79-...-dr531-squashfs-sysupgrade.bin
erase 0x9f050000 +$filesize
cp.b $fileaddr 0x9f050000 $filesize
setenv bootcmd "bootm 0x9f050000"
saveenv && reset
Signed-off-by: Piotr Dymacz <pepe2k at gmail.com>
---
target/linux/ath79/dts/qca9531_wallys_dr531.dts | 158 +++++++++++++++++++++
.../ath79/generic/base-files/etc/board.d/01_leds | 9 ++
target/linux/ath79/image/generic.mk | 10 ++
3 files changed, 177 insertions(+)
diff --git a/target/linux/ath79/dts/qca9531_wallys_dr531.dts b/target/linux/ath79/dts/qca9531_wallys_dr531.dts
new file mode 100644
index 0000000000..a31e24b7cc
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_wallys_dr531.dts
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Wallys DR531";
+ compatible = "wallys,dr531", "qca,qca9531";
+
+ aliases {
+ label-mac-device = ð1;
+ led-boot = &led_sig4;
+ led-failsafe = &led_sig4;
+ led-upgrade = &led_sig4;
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ buzzer {
+ gpio-export,name = "buzzer";
+ gpio-export,output = <0>;
+ gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ lan {
+ label = "dr531:green:lan";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led_sig4: sig4 {
+ label = "dr531:green:sig4";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ sig1 {
+ label = "dr531:green:sig1";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ sig2 {
+ label = "dr531:green:sig2";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ sig3 {
+ label = "dr531:green:sig3";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "dr531:green:wan";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+ mtd-mac-address = <&env 0xf818>;
+};
+
+ð1 {
+ /* Workaround: keep the Ethernet interfaces order/mapping correct
+ * (GMAC0 -> eth0, GMAC1 -> eth1, same as in old ar71xx target) */
+ compatible = "qca,qca9530-eth", "syscon", "simple-mfd";
+
+ mtd-mac-address = <&env 0xf810>;
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ num-cs = <1>;
+
+ flash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x000000 0x030000>;
+ read-only;
+ };
+
+ env: partition at 30000 {
+ label = "u-boot-env";
+ reg = <0x030000 0x010000>;
+ };
+
+ partition at 40000 {
+ label = "partition-table";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ partition at 50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0x7a0000>;
+ };
+
+ art: partition at 7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index a90aaf0231..2b7b3bed55 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -356,6 +356,15 @@ ubnt,powerbeam-5ac-gen2)
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "ubnt:blue:rssi2" "wlan0" "51" "100"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "ubnt:blue:rssi3" "wlan0" "76" "100"
;;
+wallys,dr531)
+ ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0"
+ ucidef_set_led_switch "wan" "WAN" "$boardname:green:wan" "switch0" "0x2"
+ ucidef_set_rssimon "wlan0" "200000" "1"
+ ucidef_set_led_rssi "sig1" "SIG1" "$boardname:green:sig1" "wlan0" "1" "100"
+ ucidef_set_led_rssi "sig2" "SIG2" "$boardname:green:sig2" "wlan0" "25" "100"
+ ucidef_set_led_rssi "sig3" "SIG3" "$boardname:green:sig3" "wlan0" "50" "100"
+ ucidef_set_led_rssi "sig4" "SIG4" "$boardname:green:sig4" "wlan0" "75" "100"
+ ;;
wd,mynet-wifi-rangeextender)
ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0"
ucidef_set_rssimon "wlan0" "200000" "1"
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 54e927cb8e..e8bc74178f 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -1517,6 +1517,16 @@ define Device/trendnet_tew-823dru
endef
TARGET_DEVICES += trendnet_tew-823dru
+define Device/wallys_dr531
+ SOC := qca9531
+ DEVICE_VENDOR := Wallys
+ DEVICE_MODEL := DR531
+ DEVICE_PACKAGES := kmod-usb2 rssileds
+ IMAGE_SIZE := 7808k
+ SUPPORTED_DEVICES += dr531
+endef
+TARGET_DEVICES += wallys_dr531
+
define Device/wd_mynet-n750
$(Device/seama)
SOC := ar9344
More information about the lede-commits
mailing list