[openwrt/openwrt] ath79: add support for Buffalo WZR-600DHP
LEDE Commits
lede-commits at lists.infradead.org
Wed Sep 16 11:43:32 EDT 2020
adrian pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/25f2f66eeaf720e3db154019fe0b32a146c6082f
commit 25f2f66eeaf720e3db154019fe0b32a146c6082f
Author: Adrian Schmutzler <freifunk at adrianschmutzler.de>
AuthorDate: Sun Sep 13 15:27:49 2020 +0200
ath79: add support for Buffalo WZR-600DHP
The hardware of this device seems to be identical to WZR-HP-AG300H.
It was already implemented as a clone in ar71xx.
Specification:
- 680 MHz CPU (Qualcomm Atheros AR7161)
- 128 MiB RAM
- 32 MiB Flash
- WiFi 5 GHz a/n
- WiFi 2.4 GHz b/g/n
- 5x 1000Base-T Ethernet
- 1x USB 2.0
Installation of OpenWRT from vendor firmware:
- Connect to the Web-interface at http://192.168.11.1
- Go to “Administration” → “Firmware Upgrade”
- Upload the OpenWrt factory image
Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
---
.../linux/ath79/dts/ar7161_buffalo_wzr-600dhp.dts | 9 +
.../ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dts | 267 +--------------------
...g300h.dts => ar7161_buffalo_wzr-hp-ag300h.dtsi} | 4 -
.../generic/base-files/etc/board.d/02_network | 1 +
.../etc/hotplug.d/firmware/10-ath9k-eeprom | 2 +
target/linux/ath79/image/generic.mk | 14 +-
6 files changed, 26 insertions(+), 271 deletions(-)
diff --git a/target/linux/ath79/dts/ar7161_buffalo_wzr-600dhp.dts b/target/linux/ath79/dts/ar7161_buffalo_wzr-600dhp.dts
new file mode 100644
index 0000000000..beee19ed6f
--- /dev/null
+++ b/target/linux/ath79/dts/ar7161_buffalo_wzr-600dhp.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ar7161_buffalo_wzr-hp-ag300h.dtsi"
+
+/ {
+ compatible = "buffalo,wzr-600dhp", "qca,ar7161";
+ model = "Buffalo WZR-600DHP";
+};
diff --git a/target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dts b/target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dts
index 43f35683bd..807f76cf17 100644
--- a/target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dts
+++ b/target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dts
@@ -1,272 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar7100.dtsi"
+#include "ar7161_buffalo_wzr-hp-ag300h.dtsi"
/ {
compatible = "buffalo,wzr-hp-ag300h", "qca,ar7161";
- model = "Buffalo WZR-HP-AG300H/WZR-600DHP";
-
- aliases {
- led-boot = &led_diag;
- led-failsafe = &led_diag;
- led-upgrade = &led_diag;
- };
-
- extosc: ref {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-output-names = "ref";
- clock-frequency = <40000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_diag: diag {
- label = "buffalo:red:diag";
- gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- };
- };
-
- ath9k-leds {
- compatible = "gpio-leds";
-
- band2g_a {
- label = "buffalo:amber:band2g";
- gpios = <&ath9k0 1 GPIO_ACTIVE_LOW>;
- };
-
- usb {
- label = "buffalo:green:usb";
- gpios = <&ath9k0 3 GPIO_ACTIVE_LOW>;
- trigger-sources = <&usb_ohci_port>, <&usb_ehci_port>;
- linux,default-trigger = "usbport";
- };
-
- band2g_g {
- label = "buffalo:green:band2g";
- gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy0tpt";
- };
-
- band5g_g {
- label = "buffalo:green:band5g";
- gpios = <&ath9k1 1 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy1tpt";
- };
-
- router {
- label = "buffalo:green:router";
- gpios = <&ath9k1 3 GPIO_ACTIVE_LOW>;
- };
-
- movie_engine {
- label = "buffalo:blue:movie_engine";
- gpios = <&ath9k1 4 GPIO_ACTIVE_LOW>;
- };
-
- band5g_a {
- label = "buffalo:amber:band5g";
- gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- usb {
- linux,code = <BTN_2>;
- gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- aoss {
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- router_auto {
- linux,code = <BTN_6>;
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- router_off {
- linux,code = <BTN_5>;
- gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- movie_engine {
- linux,code = <BTN_7>;
- gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
- };
-
- gpio-export {
- compatible = "gpio-export";
-
- gpio_usb_power {
- gpio-export,name = "buffalo:power:usb";
- gpio-export,output = <1>;
- gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
- };
- };
-
- flash {
- compatible = "mtd-concat";
-
- devices = <&flash0 &flash1>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
- partition at 0 {
- label = "u-boot";
- reg = <0x0000000 0x0040000>;
- read-only;
- };
-
- partition at 40000 {
- label = "u-boot-env";
- reg = <0x0040000 0x0010000>;
- read-only;
- };
-
- art: partition at 50000 {
- label = "art";
- reg = <0x0050000 0x0010000>;
- read-only;
- };
-
- partition at 60000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x0060000 0x1f90000>;
- };
-
- partition at 1ff0000 {
- label = "user_property";
- reg = <0x1ff0000 0x0010000>;
- read-only;
- };
- };
- };
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&usb1 {
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- usb_ohci_port: port at 1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-};
-
-&usb2 {
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- usb_ehci_port: port at 1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-};
-
-&pcie0 {
- status = "okay";
-
- ath9k0: wifi at 0,11 {
- compatible = "pci168c,0029";
- reg = <0x8800 0 0 0 0>;
- qca,no-eeprom;
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- ath9k1: wifi at 0,12 {
- compatible = "pci168c,0029";
- reg = <0x9000 0 0 0 0>;
- qca,no-eeprom;
- #gpio-cells = <2>;
- gpio-controller;
- };
-};
-
-&uart {
- status = "okay";
-};
-
-&pll {
- clocks = <&extosc>;
-};
-
-&spi {
- status = "okay";
-
- num-cs = <2>;
- cs-gpios = <0>, <0>;
-
- flash0: flash at 0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <50000000>;
- m25p,fast-read;
- };
-
- flash1: flash at 1 {
- compatible = "jedec,spi-nor";
- reg = <1>;
- spi-max-frequency = <50000000>;
- m25p,fast-read;
- };
-};
-
-&mdio0 {
- status = "okay";
-
- phy4: ethernet-phy at 4 {
- reg = <4>;
- phy-mode = "rgmii";
- };
-};
-
-ð0 {
- status = "okay";
-
- mtd-mac-address = <&art 0x120c>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-ð1 {
- status = "okay";
-
- mtd-mac-address = <&art 0x520c>;
- mtd-mac-address-increment = <1>;
-
- phy-handle = <&phy4>;
+ model = "Buffalo WZR-HP-AG300H";
};
diff --git a/target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dts b/target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dtsi
similarity index 97%
copy from target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dts
copy to target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dtsi
index 43f35683bd..c0040b4bbe 100644
--- a/target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dts
+++ b/target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dtsi
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
@@ -7,9 +6,6 @@
#include "ar7100.dtsi"
/ {
- compatible = "buffalo,wzr-hp-ag300h", "qca,ar7161";
- model = "Buffalo WZR-HP-AG300H/WZR-600DHP";
-
aliases {
led-boot = &led_diag;
led-failsafe = &led_diag;
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index f437f7432f..40ea14fa9b 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -94,6 +94,7 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0 at eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6 at eth0"
;;
+ buffalo,wzr-600dhp|\
buffalo,wzr-hp-ag300h|\
tplink,archer-c25-v1|\
tplink,archer-c60-v1|\
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 5ecae96cd1..3983b1f8c0 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -132,6 +132,7 @@ case "$FIRMWARE" in
;;
"ath9k-eeprom-pci-0000:00:11.0.bin")
case $board in
+ buffalo,wzr-600dhp|\
buffalo,wzr-hp-ag300h|\
netgear,wndr3700|\
netgear,wndr3700-v2|\
@@ -155,6 +156,7 @@ case "$FIRMWARE" in
;;
"ath9k-eeprom-pci-0000:00:12.0.bin")
case $board in
+ buffalo,wzr-600dhp|\
buffalo,wzr-hp-ag300h|\
netgear,wndr3700|\
netgear,wndr3700-v2|\
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 4b6cdaa826..7e5b09af2b 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -333,16 +333,26 @@ define Device/buffalo_bhr-4grv2
endef
TARGET_DEVICES += buffalo_bhr-4grv2
-define Device/buffalo_wzr-hp-ag300h
+define Device/buffalo_wzr_ar7161
$(Device/buffalo_common)
SOC := ar7161
- DEVICE_MODEL := WZR-HP-AG300H
BUFFALO_PRODUCT := WZR-HP-AG300H
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport \
kmod-leds-reset kmod-owl-loader
IMAGE_SIZE := 32320k
SUPPORTED_DEVICES += wzr-hp-ag300h
endef
+
+define Device/buffalo_wzr-600dhp
+ $(Device/buffalo_wzr_ar7161)
+ DEVICE_MODEL := WZR-600DHP
+endef
+TARGET_DEVICES += buffalo_wzr-600dhp
+
+define Device/buffalo_wzr-hp-ag300h
+ $(Device/buffalo_wzr_ar7161)
+ DEVICE_MODEL := WZR-HP-AG300H
+endef
TARGET_DEVICES += buffalo_wzr-hp-ag300h
define Device/buffalo_wzr-hp-g302h-a1a0
More information about the lede-commits
mailing list