[openwrt/openwrt] ath25: add back target support
LEDE Commits
lede-commits at lists.infradead.org
Sun Sep 6 13:58:36 EDT 2020
adrian pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/081e944be6684bf5c4ee7c9fa2683d568d5be288
commit 081e944be6684bf5c4ee7c9fa2683d568d5be288
Author: Adrian Schmutzler <freifunk at adrianschmutzler.de>
AuthorDate: Sun Sep 6 13:57:27 2020 +0200
ath25: add back target support
Discussion on the mailing list reveals that this target has active
users. As we are finally able to upgrade this target to kernel 5.4,
add it back to master.
This reverts commit 7d29a5571403 ("ath25: drop target") and
immediately moves the relevant files to 5.4, without touching
the content.
Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
---
package/kernel/mac80211/ath.mk | 10 +-
target/linux/ath25/Makefile | 24 +
target/linux/ath25/base-files/etc/board.d/01_leds | 13 +
.../linux/ath25/base-files/etc/board.d/02_network | 28 +
.../lib/preinit/15_preinit_iface_atheros | 34 +
.../linux/ath25/base-files/lib/upgrade/platform.sh | 76 +
target/linux/ath25/config-5.4 | 170 ++
target/linux/ath25/image/Makefile | 115 ++
.../linux/ath25/patches-5.4/107-ar5312_gpio.patch | 212 +++
.../linux/ath25/patches-5.4/108-ar2315_gpio.patch | 363 ++++
.../ath25/patches-5.4/110-ar2313_ethernet.patch | 1734 ++++++++++++++++++++
target/linux/ath25/patches-5.4/120-spiflash.patch | 634 +++++++
target/linux/ath25/patches-5.4/130-watchdog.patch | 277 ++++
.../patches-5.4/140-redboot_boardconfig.patch | 60 +
.../patches-5.4/141-redboot_partition_scan.patch | 44 +
.../142-redboot_various_erase_size_fix.patch | 72 +
.../linux/ath25/patches-5.4/210-reset_button.patch | 71 +
.../patches-5.4/220-enet_micrel_workaround.patch | 111 ++
.../linux/ath25/patches-5.4/330-board_leds.patch | 116 ++
target/linux/ath25/profiles/00-default.mk | 16 +
20 files changed, 4177 insertions(+), 3 deletions(-)
diff --git a/package/kernel/mac80211/ath.mk b/package/kernel/mac80211/ath.mk
index 45037738de..5db4be8daa 100644
--- a/package/kernel/mac80211/ath.mk
+++ b/package/kernel/mac80211/ath.mk
@@ -55,7 +55,11 @@ config-$(call config_package,ath9k-htc) += ATH9K_HTC
config-$(call config_package,ath10k) += ATH10K ATH10K_PCI
config-$(call config_package,ath5k) += ATH5K
-config-y += ATH5K_PCI
+ifdef CONFIG_TARGET_ath25
+ config-y += ATH5K_AHB
+else
+ config-y += ATH5K_PCI
+endif
config-$(call config_package,ath6kl) += ATH6KL
config-$(call config_package,ath6kl-sdio) += ATH6KL_SDIO
@@ -117,7 +121,7 @@ endef
define KernelPackage/ath
$(call KernelPackage/mac80211/Default)
TITLE:=Atheros common driver part
- DEPENDS+= @PCI_SUPPORT||USB_SUPPORT||TARGET_ath79 +kmod-mac80211
+ DEPENDS+= @PCI_SUPPORT||USB_SUPPORT||TARGET_ath79||TARGET_ath25 +kmod-mac80211
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath.ko
MENU:=1
endef
@@ -130,7 +134,7 @@ define KernelPackage/ath5k
$(call KernelPackage/mac80211/Default)
TITLE:=Atheros 5xxx wireless cards support
URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath5k
- DEPENDS+= @PCI_SUPPORT +kmod-ath + at DRIVER_11W_SUPPORT
+ DEPENDS+= @(PCI_SUPPORT||TARGET_ath25) +kmod-ath + at DRIVER_11W_SUPPORT
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath5k/ath5k.ko
AUTOLOAD:=$(call AutoProbe,ath5k)
endef
diff --git a/target/linux/ath25/Makefile b/target/linux/ath25/Makefile
new file mode 100644
index 0000000000..8b175fc194
--- /dev/null
+++ b/target/linux/ath25/Makefile
@@ -0,0 +1,24 @@
+#
+# Copyright (C) 2006-2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+ARCH:=mips
+BOARD:=ath25
+BOARDNAME:=Atheros AR231x/AR5312
+FEATURES:=squashfs low_mem small_flash
+
+KERNEL_PATCHVER:=5.4
+
+define Target/Description
+ Build firmware images for Atheros SoC boards
+endef
+
+include $(INCLUDE_DIR)/target.mk
+
+DEFAULT_PACKAGES += wpad-basic-wolfssl kmod-ath5k swconfig kmod-gpio-button-hotplug
+
+$(eval $(call BuildTarget))
diff --git a/target/linux/ath25/base-files/etc/board.d/01_leds b/target/linux/ath25/base-files/etc/board.d/01_leds
new file mode 100755
index 0000000000..e6ab4a76b1
--- /dev/null
+++ b/target/linux/ath25/base-files/etc/board.d/01_leds
@@ -0,0 +1,13 @@
+#!/bin/sh
+# Copyright 2012-2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+ucidef_set_led_netdev "wlan" "wlan" "wlan" "wlan0"
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/ath25/base-files/etc/board.d/02_network b/target/linux/ath25/base-files/etc/board.d/02_network
new file mode 100755
index 0000000000..b2977f7b94
--- /dev/null
+++ b/target/linux/ath25/base-files/etc/board.d/02_network
@@ -0,0 +1,28 @@
+#!/bin/sh
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+if [ -e "/sys/bus/mdio_bus/drivers/IC+ IP175C/0:00" -o \
+ -e "/sys/bus/mdio_bus/drivers/IC+ IP17xx/0:00" ] && \
+ [ -x /sbin/swconfig ];
+then
+ ucidef_add_switch "eth0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5 at eth0"
+
+elif [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
+ -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ];
+then
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+
+elif [ -d /sys/class/net/eth1 ]; then
+ ucidef_set_interfaces_lan_wan "eth0" "eth1"
+
+else
+ ucidef_set_interface_lan "eth0"
+fi
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/ath25/base-files/lib/preinit/15_preinit_iface_atheros b/target/linux/ath25/base-files/lib/preinit/15_preinit_iface_atheros
new file mode 100644
index 0000000000..235ba4befc
--- /dev/null
+++ b/target/linux/ath25/base-files/lib/preinit/15_preinit_iface_atheros
@@ -0,0 +1,34 @@
+# reset button only supported on ar5315+ at the moment
+preinit_ip() {
+ if [ -z "$pi_ifname" ]; then
+ grep -q 'Atheros AR231[567]' /proc/cpuinfo && {
+ if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
+ -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then
+ vconfig set_name_type DEV_PLUS_VID_NO_PAD
+ ip link set eth0 up
+ vconfig add eth0 1
+ ifname=eth0.1
+ else
+ ifname=eth0
+ fi
+ pi_ifname=$ifname
+ }
+ fi
+ [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
+ ip addr add $pi_ip/$pi_netmask broadcast $pi_broadcast dev $pi_ifname
+ ip link set $pi_ifname up
+ }
+}
+
+
+# reset button only supported on ar5315+ at the moment
+
+preinit_ip_deconfig() {
+ if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
+ -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then
+ vconfig rem eth0.1 2>/dev/null
+ ip link set $pi_ifname down
+ elif [ -n "$pi_ifname" ]; then
+ ip -4 addr flush dev $pi_ifname
+ fi
+}
diff --git a/target/linux/ath25/base-files/lib/upgrade/platform.sh b/target/linux/ath25/base-files/lib/upgrade/platform.sh
new file mode 100644
index 0000000000..778bbf5a39
--- /dev/null
+++ b/target/linux/ath25/base-files/lib/upgrade/platform.sh
@@ -0,0 +1,76 @@
+CI_BLKSZ=65536
+CI_LDADR=0x80041000
+
+platform_find_partitions() {
+ local first dev size erasesize name
+ while read dev size erasesize name; do
+ name=${name#'"'}; name=${name%'"'}
+ case "$name" in
+ vmlinux.bin.l7|kernel|linux|rootfs)
+ if [ -z "$first" ]; then
+ first="$name"
+ else
+ echo "$erasesize:$first:$name"
+ break
+ fi
+ ;;
+ esac
+ done < /proc/mtd
+}
+
+platform_find_kernelpart() {
+ local part
+ for part in "${1%:*}" "${1#*:}"; do
+ case "$part" in
+ vmlinux.bin.l7|kernel|linux)
+ echo "$part"
+ break
+ ;;
+ esac
+ done
+}
+
+platform_check_image() {
+ [ "$#" -gt 1 ] && return 1
+
+ case "$(get_magic_word "$1")" in
+ # Combined Image
+ 4349)
+ local md5_img=$(dd if="$1" bs=2 skip=9 count=16 2>/dev/null)
+ local md5_chk=$(dd if="$1" bs=$CI_BLKSZ skip=1 2>/dev/null | md5sum -); md5_chk="${md5_chk%% *}"
+
+ if [ -n "$md5_img" -a -n "$md5_chk" ] && [ "$md5_img" = "$md5_chk" ]; then
+ return 0
+ else
+ echo "Invalid image. Contents do not match checksum (image:$md5_img calculated:$md5_chk)"
+ return 1
+ fi
+ ;;
+ *)
+ echo "Invalid image. Use combined .img files on this platform"
+ return 1
+ ;;
+ esac
+}
+
+platform_do_upgrade() {
+ local partitions=$(platform_find_partitions)
+ local kernelpart=$(platform_find_kernelpart "${partitions#*:}")
+ local erase_size=$((0x${partitions%%:*})); partitions="${partitions#*:}"
+ local kern_length=0x$(dd if="$1" bs=2 skip=1 count=4 2>/dev/null)
+ local kern_blocks=$(($kern_length / $CI_BLKSZ))
+ local root_blocks=$((0x$(dd if="$1" bs=2 skip=5 count=4 2>/dev/null) / $CI_BLKSZ))
+
+ if [ -n "$partitions" ] && [ -n "$kernelpart" ] && \
+ [ ${kern_blocks:-0} -gt 0 ] && \
+ [ ${root_blocks:-0} -gt ${kern_blocks:-0} ] && \
+ [ ${erase_size:-0} -gt 0 ];
+ then
+ local append=""
+ [ -f "$UPGRADE_BACKUP" ] && append="-j $UPGRADE_BACKUP"
+
+ ( dd if="$1" bs=$CI_BLKSZ skip=1 count=$kern_blocks 2>/dev/null; \
+ dd if="$1" bs=$CI_BLKSZ skip=$((1+$kern_blocks)) count=$root_blocks 2>/dev/null ) | \
+ mtd -r $append -F$kernelpart:$kern_length:$CI_LDADR,rootfs write - $partitions
+ fi
+}
diff --git a/target/linux/ath25/config-5.4 b/target/linux/ath25/config-5.4
new file mode 100644
index 0000000000..734f598cd0
--- /dev/null
+++ b/target/linux/ath25/config-5.4
@@ -0,0 +1,170 @@
+CONFIG_ADM6996_PHY=y
+CONFIG_AR2315_WDT=y
+CONFIG_AR8216_PHY=y
+CONFIG_ARCH_BINFMT_ELF_STATE=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
+# CONFIG_ARCH_HAS_SG_CHAIN is not set
+# CONFIG_ARCH_HAS_STRICT_KERNEL_RWX is not set
+# CONFIG_ARCH_HAS_STRICT_MODULE_RWX is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
+CONFIG_ARCH_MMAP_RND_BITS_MAX=15
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
+# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
+# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
+CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ATH25=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_CEVT_R4K=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="console=ttyS0,9600 rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_ETHERNET_PACKET_MANGLE=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_AR2315=y
+CONFIG_GPIO_AR5312=y
+# CONFIG_GRO_CELLS is not set
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+# CONFIG_HAVE_ARCH_BITREVERSE is not set
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_CBPF_JIT=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_COPY_THREAD_TLS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ_PERIODIC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IP17XX_PHY=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_MIPS_CPU=y
+CONFIG_IRQ_WORK=y
+CONFIG_LEDS_GPIO=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MIPS=y
+CONFIG_MIPS_ASID_BITS=8
+CONFIG_MIPS_ASID_SHIFT=0
+CONFIG_MIPS_CLOCK_VSYSCALL=y
+# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
+CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y
+# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MACHINE is not set
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MTD_AR2315=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+# CONFIG_MTD_CFI_GEOMETRY is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_MYLOADER_PARTS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MVSWITCH_PHY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_AR231X=y
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+# CONFIG_NO_IOPORT_MAP is not set
+# CONFIG_OF is not set
+CONFIG_PCI=y
+CONFIG_PCI_AR2315=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DRIVERS_LEGACY=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+# CONFIG_RCU_NEED_SEGCBLIST is not set
+# CONFIG_RCU_STALL_COMMON is not set
+# CONFIG_SCHED_INFO is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SERIAL_8250_FSL is not set
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SOC_AR2315=y
+CONFIG_SOC_AR5312=y
+CONFIG_SRCU=y
+# CONFIG_SWAP is not set
+CONFIG_SWCONFIG=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TINY_SRCU=y
+CONFIG_USB_SUPPORT=y
diff --git a/target/linux/ath25/image/Makefile b/target/linux/ath25/image/Makefile
new file mode 100644
index 0000000000..8066ba61a8
--- /dev/null
+++ b/target/linux/ath25/image/Makefile
@@ -0,0 +1,115 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+
+define Build/mkfwimage
+ $(STAGING_DIR_HOST)/bin/mkfwimage \
+ -B $(1).$(VERSION_DIST).$(REVISION) \
+ -k $(IMAGE_KERNEL) \
+ -r $(IMAGE_ROOTFS) \
+ -o $@.new && \
+ mv $@.new $@
+endef
+
+define Build/combined-image
+ -sh $(TOPDIR)/scripts/combined-image.sh \
+ "$(IMAGE_KERNEL)" \
+ "$(IMAGE_ROOTFS)" \
+ "$@.new" && \
+ mv $@.new $@
+endef
+
+define Build/mkmylofw
+ $(STAGING_DIR_HOST)/bin/mkmylofw -B $(1) \
+ -p0x020000:0x130000:ah:0x80041000:linux:$(IMAGE_KERNEL) \
+ -p0x150000:0x2a0000:::rootfs:$(IMAGE_ROOTFS) \
+ $@.new && \
+ mv $@.new $@
+endef
+
+define Build/gzip-kernel
+ gzip -9n -c $@ > $@.gz
+ dd if=$@.gz of=$@ bs=65536 conv=sync
+endef
+
+define Build/lzma-kernel
+ $(STAGING_DIR_HOST)/bin/lzma e $@ $@.l7
+ dd if=$@.l7 of=$@ bs=65536 conv=sync
+endef
+
+define Build/copy-kernel
+ rm -f $@ $@.elf
+ cp $< $@
+ cp $< $@.elf
+endef
+
+define Build/elf-kernel
+ cp $(IMAGE_KERNEL).elf $@
+endef
+
+
+define Device/Default
+ PROFILES = Default $$(DEVICE_NAME)
+ KERNEL := copy-kernel | lzma-kernel
+ IMAGES := sysupgrade.bin
+ FILESYSTEMS := squashfs
+endef
+
+define Device/generic
+ DEVICE_VENDOR := Atheros
+ DEVICE_MODEL := Generic AR2xxx board
+ IMAGES := kernel.lzma kernel.elf kernel.gz rootfs.bin sysupgrade.bin
+ IMAGE/kernel.gz := elf-kernel | gzip-kernel
+ IMAGE/kernel.elf := elf-kernel
+ IMAGE/kernel.lzma := elf-kernel | lzma-kernel
+ IMAGE/rootfs.bin := append-rootfs | pad-rootfs | pad-to 128k
+ IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to 128k | combined-image
+ IMAGE_NAME = $$(IMAGE_PREFIX)-$$(if $$(findstring kernel,$$(2)),,$$(1)-)$$(2)
+endef
+TARGET_DEVICES += generic
+
+define Device/ubnt2-pico2
+ DEVICE_VENDOR := Ubiquiti
+ DEVICE_MODEL := XS2-8
+ IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to 128k | mkfwimage XS2-8 -v XS2.ar2316
+endef
+TARGET_DEVICES += ubnt2-pico2
+
+define Device/ubnt2
+ DEVICE_VENDOR := Ubiquiti
+ DEVICE_MODEL := XS2
+ IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to 128k | mkfwimage XS2 -v XS2.ar2316
+endef
+TARGET_DEVICES += ubnt2
+
+define Device/ubnt5
+ DEVICE_VENDOR := Ubiquiti
+ DEVICE_MODEL := XS5
+ IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to 128k | mkfwimage XS5 -v XS5.ar2313
+endef
+TARGET_DEVICES += ubnt5
+
+define Device/np25g
+ DEVICE_VENDOR := Compex
+ DEVICE_MODEL := NP25G
+ KERNEL := kernel-bin | gzip-kernel
+ IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to 128k | mkmylofw np25g
+ BROKEN := y
+endef
+TARGET_DEVICES += np25g
+
+define Device/wpe53g
+ DEVICE_VENDOR := Compex
+ DEVICE_MODEL := WPE53G
+ KERNEL := kernel-bin | gzip-kernel
+ IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to 128k | mkmylofw wpe53g
+ BROKEN := y
+endef
+TARGET_DEVICES += wpe53g
+
+$(eval $(call BuildImage))
diff --git a/target/linux/ath25/patches-5.4/107-ar5312_gpio.patch b/target/linux/ath25/patches-5.4/107-ar5312_gpio.patch
new file mode 100644
index 0000000000..e74e20b05a
--- /dev/null
+++ b/target/linux/ath25/patches-5.4/107-ar5312_gpio.patch
@@ -0,0 +1,212 @@
+--- a/arch/mips/ath25/Kconfig
++++ b/arch/mips/ath25/Kconfig
+@@ -2,6 +2,7 @@
+ config SOC_AR5312
+ bool "Atheros AR5312/AR2312+ SoC support"
+ depends on ATH25
++ select GPIO_AR5312
+ default y
+
+ config SOC_AR2315
+--- a/arch/mips/ath25/ar5312.c
++++ b/arch/mips/ath25/ar5312.c
+@@ -22,6 +22,7 @@
+ #include <linux/platform_device.h>
+ #include <linux/mtd/physmap.h>
+ #include <linux/reboot.h>
++#include <linux/gpio.h>
+ #include <asm/bootinfo.h>
+ #include <asm/reboot.h>
+ #include <asm/time.h>
+@@ -180,6 +181,22 @@ static struct platform_device ar5312_phy
+ .num_resources = 1,
+ };
+
++static struct resource ar5312_gpio_res[] = {
++ {
++ .name = "ar5312-gpio",
++ .flags = IORESOURCE_MEM,
++ .start = AR5312_GPIO_BASE,
++ .end = AR5312_GPIO_BASE + AR5312_GPIO_SIZE - 1,
++ },
++};
++
++static struct platform_device ar5312_gpio = {
++ .name = "ar5312-gpio",
++ .id = -1,
++ .resource = ar5312_gpio_res,
++ .num_resources = ARRAY_SIZE(ar5312_gpio_res),
++};
++
+ static void __init ar5312_flash_init(void)
+ {
+ void __iomem *flashctl_base;
+@@ -247,6 +264,8 @@ void __init ar5312_init_devices(void)
+
+ platform_device_register(&ar5312_physmap_flash);
+
++ platform_device_register(&ar5312_gpio);
++
+ switch (ath25_soc) {
+ case ATH25_SOC_AR5312:
+ if (!ath25_board.radio)
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -105,6 +105,13 @@ config GPIO_AMDPT
+ driver for GPIO functionality on Promontory IOHub
+ Require ACPI ASL code to enumerate as a platform device.
+
++config GPIO_AR5312
++ bool "AR5312 SoC GPIO support"
++ default y if SOC_AR5312
++ depends on SOC_AR5312
++ help
++ Say yes here to enable GPIO support for Atheros AR5312/AR2312+ SoCs.
++
+ config GPIO_ASPEED
+ tristate "Aspeed GPIO support"
+ depends on (ARCH_ASPEED || COMPILE_TEST) && OF_GPIO
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -29,6 +29,7 @@ obj-$(CONFIG_GPIO_ALTERA) += gpio-alte
+ obj-$(CONFIG_GPIO_ALTERA_A10SR) += gpio-altera-a10sr.o
+ obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o
+ obj-$(CONFIG_GPIO_AMDPT) += gpio-amdpt.o
++obj-$(CONFIG_GPIO_AR5312) += gpio-ar5312.o
+ obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o
+ obj-$(CONFIG_GPIO_ATH79) += gpio-ath79.o
+ obj-$(CONFIG_GPIO_ASPEED) += gpio-aspeed.o
+--- /dev/null
++++ b/drivers/gpio/gpio-ar5312.c
+@@ -0,0 +1,121 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
++ * Copyright (C) 2006 FON Technology, SL.
++ * Copyright (C) 2006 Imre Kaloz <kaloz at openwrt.org>
++ * Copyright (C) 2006-2009 Felix Fietkau <nbd at nbd.name>
++ * Copyright (C) 2012 Alexandros C. Couloumbis <alex at ozo.com>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/gpio.h>
++
++#define DRIVER_NAME "ar5312-gpio"
++
++#define AR5312_GPIO_DO 0x00 /* output register */
++#define AR5312_GPIO_DI 0x04 /* intput register */
++#define AR5312_GPIO_CR 0x08 /* control register */
++
++#define AR5312_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
++#define AR5312_GPIO_CR_O(x) (0 << (x)) /* mask for output */
++#define AR5312_GPIO_CR_I(x) (1 << (x)) /* mask for input */
++#define AR5312_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */
++#define AR5312_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */
++
++#define AR5312_GPIO_NUM 8
++
++static void __iomem *ar5312_mem;
++
++static inline u32 ar5312_gpio_reg_read(unsigned reg)
++{
++ return __raw_readl(ar5312_mem + reg);
++}
++
++static inline void ar5312_gpio_reg_write(unsigned reg, u32 val)
++{
++ __raw_writel(val, ar5312_mem + reg);
++}
++
++static inline void ar5312_gpio_reg_mask(unsigned reg, u32 mask, u32 val)
++{
++ ar5312_gpio_reg_write(reg, (ar5312_gpio_reg_read(reg) & ~mask) | val);
++}
++
++static int ar5312_gpio_get_val(struct gpio_chip *chip, unsigned gpio)
++{
++ return (ar5312_gpio_reg_read(AR5312_GPIO_DI) >> gpio) & 1;
++}
++
++static void ar5312_gpio_set_val(struct gpio_chip *chip, unsigned gpio, int val)
++{
++ u32 reg = ar5312_gpio_reg_read(AR5312_GPIO_DO);
++
++ reg = val ? reg | (1 << gpio) : reg & ~(1 << gpio);
++ ar5312_gpio_reg_write(AR5312_GPIO_DO, reg);
++}
++
++static int ar5312_gpio_dir_in(struct gpio_chip *chip, unsigned gpio)
++{
++ ar5312_gpio_reg_mask(AR5312_GPIO_CR, 0, 1 << gpio);
++ return 0;
++}
++
++static int ar5312_gpio_dir_out(struct gpio_chip *chip, unsigned gpio, int val)
++{
++ ar5312_gpio_reg_mask(AR5312_GPIO_CR, 1 << gpio, 0);
++ ar5312_gpio_set_val(chip, gpio, val);
++ return 0;
++}
++
++static struct gpio_chip ar5312_gpio_chip = {
++ .label = DRIVER_NAME,
++ .direction_input = ar5312_gpio_dir_in,
++ .direction_output = ar5312_gpio_dir_out,
++ .set = ar5312_gpio_set_val,
++ .get = ar5312_gpio_get_val,
++ .base = 0,
++ .ngpio = AR5312_GPIO_NUM,
++};
++
++static int ar5312_gpio_probe(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct resource *res;
++ int ret;
++
++ if (ar5312_mem)
++ return -EBUSY;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ ar5312_mem = devm_ioremap_resource(dev, res);
++ if (IS_ERR(ar5312_mem))
++ return PTR_ERR(ar5312_mem);
++
++ ar5312_gpio_chip.parent = dev;
++ ret = gpiochip_add(&ar5312_gpio_chip);
++ if (ret) {
++ dev_err(dev, "failed to add gpiochip\n");
++ return ret;
++ }
++
++ return 0;
++}
++
++static struct platform_driver ar5312_gpio_driver = {
++ .probe = ar5312_gpio_probe,
++ .driver = {
++ .name = DRIVER_NAME,
++ .owner = THIS_MODULE,
++ }
++};
++
++static int __init ar5312_gpio_init(void)
++{
++ return platform_driver_register(&ar5312_gpio_driver);
++}
++subsys_initcall(ar5312_gpio_init);
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -175,6 +175,7 @@ config ATH25
+ select CEVT_R4K
+ select CSRC_R4K
+ select DMA_NONCOHERENT
++ select GPIOLIB
+ select IRQ_MIPS_CPU
+ select IRQ_DOMAIN
+ select SYS_HAS_CPU_MIPS32_R1
diff --git a/target/linux/ath25/patches-5.4/108-ar2315_gpio.patch b/target/linux/ath25/patches-5.4/108-ar2315_gpio.patch
new file mode 100644
index 0000000000..749b308b89
--- /dev/null
+++ b/target/linux/ath25/patches-5.4/108-ar2315_gpio.patch
@@ -0,0 +1,363 @@
+--- a/arch/mips/ath25/Kconfig
++++ b/arch/mips/ath25/Kconfig
+@@ -8,6 +8,7 @@ config SOC_AR5312
+ config SOC_AR2315
+ bool "Atheros AR2315+ SoC support"
+ depends on ATH25
++ select GPIO_AR2315
+ default y
+
+ config PCI_AR2315
+--- a/arch/mips/ath25/ar2315.c
++++ b/arch/mips/ath25/ar2315.c
+@@ -21,6 +21,8 @@
+ #include <linux/interrupt.h>
+ #include <linux/platform_device.h>
+ #include <linux/reboot.h>
++#include <linux/delay.h>
++#include <linux/gpio.h>
+ #include <asm/bootinfo.h>
+ #include <asm/reboot.h>
+ #include <asm/time.h>
+@@ -167,11 +169,42 @@ void __init ar2315_arch_init_irq(void)
+ ar2315_misc_irq_domain = domain;
+ }
+
++static struct resource ar2315_gpio_res[] = {
++ {
++ .name = "ar2315-gpio",
++ .flags = IORESOURCE_MEM,
++ .start = AR2315_RST_BASE + AR2315_GPIO,
++ .end = AR2315_RST_BASE + AR2315_GPIO + 0x10 - 1,
++ },
++ {
++ .name = "ar2315-gpio",
++ .flags = IORESOURCE_IRQ,
++ },
++ {
++ .name = "ar2315-gpio-irq-base",
++ .flags = IORESOURCE_IRQ,
++ .start = AR231X_GPIO_IRQ_BASE,
++ .end = AR231X_GPIO_IRQ_BASE,
++ }
++};
++
++static struct platform_device ar2315_gpio = {
++ .id = -1,
++ .name = "ar2315-gpio",
++ .resource = ar2315_gpio_res,
++ .num_resources = ARRAY_SIZE(ar2315_gpio_res)
++};
++
+ void __init ar2315_init_devices(void)
+ {
+ /* Find board configuration */
+ ath25_find_config(AR2315_SPI_READ_BASE, AR2315_SPI_READ_SIZE);
+
++ ar2315_gpio_res[1].start = irq_create_mapping(ar2315_misc_irq_domain,
++ AR2315_MISC_IRQ_GPIO);
++ ar2315_gpio_res[1].end = ar2315_gpio_res[1].start;
++ platform_device_register(&ar2315_gpio);
++
+ ath25_add_wmac(0, AR2315_WLAN0_BASE, AR2315_IRQ_WLAN0);
+ }
+
+@@ -187,8 +220,8 @@ static void ar2315_restart(char *command
+ /* Cold reset does not work on the AR2315/6, use the GPIO reset bits
+ * a workaround. Give it some time to attempt a gpio based hardware
+ * reset (atheros reference design workaround) */
+-
+- /* TODO: implement the GPIO reset workaround */
++ gpio_request_one(AR2315_RESET_GPIO, GPIOF_OUT_INIT_LOW, "Reset");
++ mdelay(100);
+
+ /* Some boards (e.g. Senao EOC-2610) don't implement the reset logic
+ * workaround. Attempt to jump to the mips reset location -
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -105,6 +105,13 @@ config GPIO_AMDPT
+ driver for GPIO functionality on Promontory IOHub
+ Require ACPI ASL code to enumerate as a platform device.
+
++config GPIO_AR2315
++ bool "AR2315 SoC GPIO support"
++ default y if SOC_AR2315
++ depends on SOC_AR2315
++ help
++ Say yes here to enable GPIO support for Atheros AR2315+ SoCs.
++
+ config GPIO_AR5312
+ bool "AR5312 SoC GPIO support"
+ default y if SOC_AR5312
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -29,6 +29,7 @@ obj-$(CONFIG_GPIO_ALTERA) += gpio-alte
+ obj-$(CONFIG_GPIO_ALTERA_A10SR) += gpio-altera-a10sr.o
+ obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o
+ obj-$(CONFIG_GPIO_AMDPT) += gpio-amdpt.o
++obj-$(CONFIG_GPIO_AR2315) += gpio-ar2315.o
+ obj-$(CONFIG_GPIO_AR5312) += gpio-ar5312.o
+ obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o
+ obj-$(CONFIG_GPIO_ATH79) += gpio-ath79.o
+--- /dev/null
++++ b/drivers/gpio/gpio-ar2315.c
+@@ -0,0 +1,233 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
++ * Copyright (C) 2006 FON Technology, SL.
++ * Copyright (C) 2006 Imre Kaloz <kaloz at openwrt.org>
++ * Copyright (C) 2006 Felix Fietkau <nbd at nbd.name>
++ * Copyright (C) 2012 Alexandros C. Couloumbis <alex at ozo.com>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/gpio.h>
++#include <linux/irq.h>
++
++#define DRIVER_NAME "ar2315-gpio"
++
++#define AR2315_GPIO_DI 0x0000
++#define AR2315_GPIO_DO 0x0008
++#define AR2315_GPIO_DIR 0x0010
++#define AR2315_GPIO_INT 0x0018
++
++#define AR2315_GPIO_DIR_M(x) (1 << (x)) /* mask for i/o */
++#define AR2315_GPIO_DIR_O(x) (1 << (x)) /* output */
++#define AR2315_GPIO_DIR_I(x) (0) /* input */
++
++#define AR2315_GPIO_INT_NUM_M 0x3F /* mask for GPIO num */
++#define AR2315_GPIO_INT_TRIG(x) ((x) << 6) /* interrupt trigger */
++#define AR2315_GPIO_INT_TRIG_M (0x3 << 6) /* mask for int trig */
++
++#define AR2315_GPIO_INT_TRIG_OFF 0 /* Triggerring off */
++#define AR2315_GPIO_INT_TRIG_LOW 1 /* Low Level Triggered */
++#define AR2315_GPIO_INT_TRIG_HIGH 2 /* High Level Triggered */
++#define AR2315_GPIO_INT_TRIG_EDGE 3 /* Edge Triggered */
++
++#define AR2315_GPIO_NUM 22
++
++static u32 ar2315_gpio_intmask;
++static u32 ar2315_gpio_intval;
++static unsigned ar2315_gpio_irq_base;
++static void __iomem *ar2315_mem;
++
++static inline u32 ar2315_gpio_reg_read(unsigned reg)
++{
++ return __raw_readl(ar2315_mem + reg);
++}
++
++static inline void ar2315_gpio_reg_write(unsigned reg, u32 val)
++{
++ __raw_writel(val, ar2315_mem + reg);
++}
++
++static inline void ar2315_gpio_reg_mask(unsigned reg, u32 mask, u32 val)
++{
++ ar2315_gpio_reg_write(reg, (ar2315_gpio_reg_read(reg) & ~mask) | val);
++}
++
++static void ar2315_gpio_irq_handler(struct irq_desc *desc)
++{
++ u32 pend;
++ int bit = -1;
++
++ /* only do one gpio interrupt at a time */
++ pend = ar2315_gpio_reg_read(AR2315_GPIO_DI);
++ pend ^= ar2315_gpio_intval;
++ pend &= ar2315_gpio_intmask;
++
++ if (pend) {
++ bit = fls(pend) - 1;
++ pend &= ~(1 << bit);
++ ar2315_gpio_intval ^= (1 << bit);
++ }
++
++ /* Enable interrupt with edge detection */
++ if ((ar2315_gpio_reg_read(AR2315_GPIO_DIR) & AR2315_GPIO_DIR_M(bit)) !=
++ AR2315_GPIO_DIR_I(bit))
++ return;
++
++ if (bit >= 0)
++ generic_handle_irq(ar2315_gpio_irq_base + bit);
++}
++
++static void ar2315_gpio_int_setup(unsigned gpio, int trig)
++{
++ u32 reg = ar2315_gpio_reg_read(AR2315_GPIO_INT);
++
++ reg &= ~(AR2315_GPIO_INT_NUM_M | AR2315_GPIO_INT_TRIG_M);
++ reg |= gpio | AR2315_GPIO_INT_TRIG(trig);
++ ar2315_gpio_reg_write(AR2315_GPIO_INT, reg);
++}
++
++static void ar2315_gpio_irq_unmask(struct irq_data *d)
++{
++ unsigned gpio = d->irq - ar2315_gpio_irq_base;
++ u32 dir = ar2315_gpio_reg_read(AR2315_GPIO_DIR);
++
++ /* Enable interrupt with edge detection */
++ if ((dir & AR2315_GPIO_DIR_M(gpio)) != AR2315_GPIO_DIR_I(gpio))
++ return;
++
++ ar2315_gpio_intmask |= (1 << gpio);
++ ar2315_gpio_int_setup(gpio, AR2315_GPIO_INT_TRIG_EDGE);
++}
++
++static void ar2315_gpio_irq_mask(struct irq_data *d)
++{
++ unsigned gpio = d->irq - ar2315_gpio_irq_base;
++
++ /* Disable interrupt */
++ ar2315_gpio_intmask &= ~(1 << gpio);
++ ar2315_gpio_int_setup(gpio, AR2315_GPIO_INT_TRIG_OFF);
++}
++
++static struct irq_chip ar2315_gpio_irq_chip = {
++ .name = DRIVER_NAME,
++ .irq_unmask = ar2315_gpio_irq_unmask,
++ .irq_mask = ar2315_gpio_irq_mask,
++};
++
++static void ar2315_gpio_irq_init(unsigned irq)
++{
++ unsigned i;
++
++ ar2315_gpio_intval = ar2315_gpio_reg_read(AR2315_GPIO_DI);
++ for (i = 0; i < AR2315_GPIO_NUM; i++) {
++ unsigned _irq = ar2315_gpio_irq_base + i;
++
++ irq_set_chip_and_handler(_irq, &ar2315_gpio_irq_chip,
++ handle_level_irq);
++ }
++ irq_set_chained_handler(irq, ar2315_gpio_irq_handler);
++}
++
++static int ar2315_gpio_get_val(struct gpio_chip *chip, unsigned gpio)
++{
++ return (ar2315_gpio_reg_read(AR2315_GPIO_DI) >> gpio) & 1;
++}
++
++static void ar2315_gpio_set_val(struct gpio_chip *chip, unsigned gpio, int val)
++{
++ u32 reg = ar2315_gpio_reg_read(AR2315_GPIO_DO);
++
++ reg = val ? reg | (1 << gpio) : reg & ~(1 << gpio);
++ ar2315_gpio_reg_write(AR2315_GPIO_DO, reg);
++}
++
++static int ar2315_gpio_dir_in(struct gpio_chip *chip, unsigned gpio)
++{
++ ar2315_gpio_reg_mask(AR2315_GPIO_DIR, 1 << gpio, 0);
++ return 0;
++}
++
++static int ar2315_gpio_dir_out(struct gpio_chip *chip, unsigned gpio, int val)
++{
++ ar2315_gpio_reg_mask(AR2315_GPIO_DIR, 0, 1 << gpio);
++ ar2315_gpio_set_val(chip, gpio, val);
++ return 0;
++}
++
++static int ar2315_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
++{
++ return ar2315_gpio_irq_base + gpio;
++}
++
++static struct gpio_chip ar2315_gpio_chip = {
++ .label = DRIVER_NAME,
++ .direction_input = ar2315_gpio_dir_in,
++ .direction_output = ar2315_gpio_dir_out,
++ .set = ar2315_gpio_set_val,
++ .get = ar2315_gpio_get_val,
++ .to_irq = ar2315_gpio_to_irq,
++ .base = 0,
++ .ngpio = AR2315_GPIO_NUM,
++};
++
++static int ar2315_gpio_probe(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct resource *res;
++ unsigned irq;
++ int ret;
++
++ if (ar2315_mem)
++ return -EBUSY;
++
++ res = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
++ "ar2315-gpio-irq-base");
++ if (!res) {
++ dev_err(dev, "not found GPIO IRQ base\n");
++ return -ENXIO;
++ }
++ ar2315_gpio_irq_base = res->start;
++
++ res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, DRIVER_NAME);
++ if (!res) {
++ dev_err(dev, "not found IRQ number\n");
++ return -ENXIO;
++ }
++ irq = res->start;
++
++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, DRIVER_NAME);
++ ar2315_mem = devm_ioremap_resource(dev, res);
++ if (IS_ERR(ar2315_mem))
++ return PTR_ERR(ar2315_mem);
++
++ ar2315_gpio_chip.parent = dev;
++ ret = gpiochip_add(&ar2315_gpio_chip);
++ if (ret) {
++ dev_err(dev, "failed to add gpiochip\n");
++ return ret;
++ }
++
++ ar2315_gpio_irq_init(irq);
++
++ return 0;
++}
++
++static struct platform_driver ar2315_gpio_driver = {
++ .probe = ar2315_gpio_probe,
++ .driver = {
++ .name = DRIVER_NAME,
++ .owner = THIS_MODULE,
++ }
++};
++
++static int __init ar2315_gpio_init(void)
++{
++ return platform_driver_register(&ar2315_gpio_driver);
++}
++subsys_initcall(ar2315_gpio_init);
+--- a/arch/mips/ath25/devices.h
++++ b/arch/mips/ath25/devices.h
+@@ -4,6 +4,11 @@
+
+ #include <linux/cpu.h>
+
++#define AR231X_GPIO_IRQ_BASE 0x30
++
++/* GPIO number for AR2315/16 reset issue workaround */
++#define AR2315_RESET_GPIO 5
++
+ #define ATH25_REG_MS(_val, _field) (((_val) & _field##_M) >> _field##_S)
+
+ #define ATH25_IRQ_CPU_CLOCK (MIPS_CPU_IRQ_BASE + 7) /* C0_CAUSE: 0x8000 */
+--- a/arch/mips/ath25/ar2315_regs.h
++++ b/arch/mips/ath25/ar2315_regs.h
+@@ -315,6 +315,9 @@
+ #define AR2315_MEM_CFG_BANKADDR_BITS_M 0x00000018
+ #define AR2315_MEM_CFG_BANKADDR_BITS_S 3
+
++/* GPIO MMR base address */
++#define AR2315_GPIO 0x0088
++
+ /*
+ * Local Bus Interface Registers
+ */
diff --git a/target/linux/ath25/patches-5.4/110-ar2313_ethernet.patch b/target/linux/ath25/patches-5.4/110-ar2313_ethernet.patch
new file mode 100644
index 0000000000..a2b1492250
--- /dev/null
+++ b/target/linux/ath25/patches-5.4/110-ar2313_ethernet.patch
@@ -0,0 +1,1734 @@
+--- a/drivers/net/ethernet/atheros/Makefile
++++ b/drivers/net/ethernet/atheros/Makefile
+@@ -8,3 +8,4 @@ obj-$(CONFIG_ATL2) += atlx/
+ obj-$(CONFIG_ATL1E) += atl1e/
+ obj-$(CONFIG_ATL1C) += atl1c/
+ obj-$(CONFIG_ALX) += alx/
++obj-$(CONFIG_NET_AR231X) += ar231x/
+--- a/drivers/net/ethernet/atheros/Kconfig
++++ b/drivers/net/ethernet/atheros/Kconfig
+@@ -5,7 +5,7 @@
+ config NET_VENDOR_ATHEROS
+ bool "Atheros devices"
+ default y
+- depends on PCI
++ depends on (PCI || ATH25)
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y.
+
+@@ -78,4 +78,10 @@ config ALX
+ To compile this driver as a module, choose M here. The module
+ will be called alx.
+
++config NET_AR231X
++ tristate "Atheros AR231X built-in Ethernet support"
++ depends on ATH25
++ help
++ Support for the AR231x/531x ethernet controller
++
+ endif # NET_VENDOR_ATHEROS
+--- /dev/null
++++ b/drivers/net/ethernet/atheros/ar231x/Makefile
+@@ -0,0 +1 @@
++obj-$(CONFIG_NET_AR231X) += ar231x.o
+--- /dev/null
++++ b/drivers/net/ethernet/atheros/ar231x/ar231x.c
+@@ -0,0 +1,1119 @@
++/*
++ * ar231x.c: Linux driver for the Atheros AR231x Ethernet device.
++ *
++ * Copyright (C) 2004 by Sameer Dekate <sdekate at arubanetworks.com>
++ * Copyright (C) 2006 Imre Kaloz <kaloz at openwrt.org>
++ * Copyright (C) 2006-2009 Felix Fietkau <nbd at nbd.name>
++ *
++ * Thanks to Atheros for providing hardware and documentation
++ * enabling me to write this driver.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * Additional credits:
++ * This code is taken from John Taylor's Sibyte driver and then
++ * modified for the AR2313.
++ */
++
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/ioport.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/interrupt.h>
++#include <linux/skbuff.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/mm.h>
++#include <linux/mii.h>
++#include <linux/phy.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++
++#define AR2313_MTU 1692
++#define AR2313_PRIOS 1
++#define AR2313_QUEUES (2*AR2313_PRIOS)
++#define AR2313_DESCR_ENTRIES 64
++
++#ifndef min
++#define min(a, b) (((a) < (b)) ? (a) : (b))
++#endif
++
++#ifndef SMP_CACHE_BYTES
++#define SMP_CACHE_BYTES L1_CACHE_BYTES
++#endif
++
++#define AR2313_MBOX_SET_BIT 0x8
++
++#include "ar231x.h"
++
++/**
++ * New interrupt handler strategy:
++ *
++ * An old interrupt handler worked using the traditional method of
++ * replacing an skbuff with a new one when a packet arrives. However
++ * the rx rings do not need to contain a static number of buffer
++ * descriptors, thus it makes sense to move the memory allocation out
++ * of the main interrupt handler and do it in a bottom half handler
++ * and only allocate new buffers when the number of buffers in the
++ * ring is below a certain threshold. In order to avoid starving the
++ * NIC under heavy load it is however necessary to force allocation
++ * when hitting a minimum threshold. The strategy for alloction is as
++ * follows:
++ *
++ * RX_LOW_BUF_THRES - allocate buffers in the bottom half
++ * RX_PANIC_LOW_THRES - we are very low on buffers, allocate
++ * the buffers in the interrupt handler
++ * RX_RING_THRES - maximum number of buffers in the rx ring
++ *
++ * One advantagous side effect of this allocation approach is that the
++ * entire rx processing can be done without holding any spin lock
++ * since the rx rings and registers are totally independent of the tx
++ * ring and its registers. This of course includes the kmalloc's of
++ * new skb's. Thus start_xmit can run in parallel with rx processing
++ * and the memory allocation on SMP systems.
++ *
++ * Note that running the skb reallocation in a bottom half opens up
++ * another can of races which needs to be handled properly. In
++ * particular it can happen that the interrupt handler tries to run
++ * the reallocation while the bottom half is either running on another
++ * CPU or was interrupted on the same CPU. To get around this the
++ * driver uses bitops to prevent the reallocation routines from being
++ * reentered.
++ *
++ * TX handling can also be done without holding any spin lock, wheee
++ * this is fun! since tx_csm is only written to by the interrupt
++ * handler.
++ */
++
++/**
++ * Threshold values for RX buffer allocation - the low water marks for
++ * when to start refilling the rings are set to 75% of the ring
++ * sizes. It seems to make sense to refill the rings entirely from the
++ * intrrupt handler once it gets below the panic threshold, that way
++ * we don't risk that the refilling is moved to another CPU when the
++ * one running the interrupt handler just got the slab code hot in its
++ * cache.
++ */
++#define RX_RING_SIZE AR2313_DESCR_ENTRIES
++#define RX_PANIC_THRES (RX_RING_SIZE/4)
++#define RX_LOW_THRES ((3*RX_RING_SIZE)/4)
++#define CRC_LEN 4
++#define RX_OFFSET 2
++
++#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
++#define VLAN_HDR 4
++#else
++#define VLAN_HDR 0
++#endif
++
++#define AR2313_BUFSIZE (AR2313_MTU + VLAN_HDR + ETH_HLEN + CRC_LEN + \
++ RX_OFFSET)
++
++#ifdef MODULE
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Sameer Dekate <sdekate at arubanetworks.com>, Imre Kaloz <kaloz at openwrt.org>, Felix Fietkau <nbd at nbd.name>");
++MODULE_DESCRIPTION("AR231x Ethernet driver");
++#endif
++
++#define virt_to_phys(x) ((u32)(x) & 0x1fffffff)
++
++/* prototypes */
++static void ar231x_halt(struct net_device *dev);
++static void rx_tasklet_func(unsigned long data);
++static void rx_tasklet_cleanup(struct net_device *dev);
++static void ar231x_multicast_list(struct net_device *dev);
++static void ar231x_tx_timeout(struct net_device *dev);
++
++static int ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum);
++static int ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
++ u16 value);
++static int ar231x_mdiobus_reset(struct mii_bus *bus);
++static int ar231x_mdiobus_probe(struct net_device *dev);
++static void ar231x_adjust_link(struct net_device *dev);
++
++#ifndef ERR
++#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
++#endif
++
++#ifdef CONFIG_NET_POLL_CONTROLLER
++static void
++ar231x_netpoll(struct net_device *dev)
++{
++ unsigned long flags;
++
++ local_irq_save(flags);
++ ar231x_interrupt(dev->irq, dev);
++ local_irq_restore(flags);
++}
++#endif
++
++static const struct net_device_ops ar231x_ops = {
++ .ndo_open = ar231x_open,
++ .ndo_stop = ar231x_close,
++ .ndo_start_xmit = ar231x_start_xmit,
++ .ndo_set_rx_mode = ar231x_multicast_list,
++ .ndo_do_ioctl = ar231x_ioctl,
++ .ndo_change_mtu = eth_change_mtu,
++ .ndo_validate_addr = eth_validate_addr,
++ .ndo_set_mac_address = eth_mac_addr,
++ .ndo_tx_timeout = ar231x_tx_timeout,
++#ifdef CONFIG_NET_POLL_CONTROLLER
++ .ndo_poll_controller = ar231x_netpoll,
++#endif
++};
++
++static int ar231x_probe(struct platform_device *pdev)
++{
++ struct net_device *dev;
++ struct ar231x_private *sp;
++ struct resource *res;
++ unsigned long ar_eth_base;
++ char buf[64];
++
++ dev = alloc_etherdev(sizeof(struct ar231x_private));
++
++ if (dev == NULL) {
++ printk(KERN_ERR
++ "ar231x: Unable to allocate net_device structure!\n");
++ return -ENOMEM;
++ }
++
++ platform_set_drvdata(pdev, dev);
++
++ SET_NETDEV_DEV(dev, &pdev->dev);
++
++ sp = netdev_priv(dev);
++ sp->dev = dev;
++ sp->cfg = pdev->dev.platform_data;
++
++ sprintf(buf, "eth%d_membase", pdev->id);
++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, buf);
++ if (!res)
++ return -ENODEV;
++
++ sp->link = 0;
++ ar_eth_base = res->start;
++
++ sprintf(buf, "eth%d_irq", pdev->id);
++ dev->irq = platform_get_irq_byname(pdev, buf);
++
++ spin_lock_init(&sp->lock);
++
++ dev->features |= NETIF_F_HIGHDMA;
++ dev->netdev_ops = &ar231x_ops;
++
++ tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long)dev);
++ tasklet_disable(&sp->rx_tasklet);
++
++ sp->eth_regs = ioremap_nocache(ar_eth_base, sizeof(*sp->eth_regs));
++ if (!sp->eth_regs) {
++ printk("Can't remap eth registers\n");
++ return -ENXIO;
++ }
++
++ /**
++ * When there's only one MAC, PHY regs are typically on ENET0,
++ * even though the MAC might be on ENET1.
++ * So remap PHY regs separately.
++ */
++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "eth0_mii");
++ if (!res) {
++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
++ "eth1_mii");
++ if (!res)
++ return -ENODEV;
++ }
++ sp->phy_regs = ioremap_nocache(res->start, resource_size(res));
++ if (!sp->phy_regs) {
++ printk("Can't remap phy registers\n");
++ return -ENXIO;
++ }
++
++ sp->dma_regs = ioremap_nocache(ar_eth_base + 0x1000,
++ sizeof(*sp->dma_regs));
++ if (!sp->dma_regs) {
++ printk("Can't remap DMA registers\n");
++ return -ENXIO;
++ }
++ dev->base_addr = ar_eth_base + 0x1000;
++
++ strncpy(sp->name, "Atheros AR231x", sizeof(sp->name) - 1);
++ sp->name[sizeof(sp->name) - 1] = '\0';
++ memcpy(dev->dev_addr, sp->cfg->macaddr, 6);
++
++ if (ar231x_init(dev)) {
++ /* ar231x_init() calls ar231x_init_cleanup() on error */
++ kfree(dev);
++ return -ENODEV;
++ }
++
++ if (register_netdev(dev)) {
++ printk("%s: register_netdev failed\n", __func__);
++ return -1;
++ }
++
++ printk("%s: %s: %pM, irq %d\n", dev->name, sp->name, dev->dev_addr,
++ dev->irq);
++
++ sp->mii_bus = mdiobus_alloc();
++ if (sp->mii_bus == NULL)
++ return -1;
++
++ sp->mii_bus->priv = dev;
++ sp->mii_bus->read = ar231x_mdiobus_read;
++ sp->mii_bus->write = ar231x_mdiobus_write;
++ sp->mii_bus->reset = ar231x_mdiobus_reset;
++ sp->mii_bus->name = "ar231x_eth_mii";
++ snprintf(sp->mii_bus->id, MII_BUS_ID_SIZE, "%d", pdev->id);
++
++ mdiobus_register(sp->mii_bus);
++
++ if (ar231x_mdiobus_probe(dev) != 0) {
++ printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name);
++ rx_tasklet_cleanup(dev);
++ ar231x_init_cleanup(dev);
++ unregister_netdev(dev);
++ kfree(dev);
++ return -ENODEV;
++ }
++
++ return 0;
++}
++
++static void ar231x_multicast_list(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ unsigned int filter;
++
++ filter = sp->eth_regs->mac_control;
++
++ if (dev->flags & IFF_PROMISC)
++ filter |= MAC_CONTROL_PR;
++ else
++ filter &= ~MAC_CONTROL_PR;
++ if ((dev->flags & IFF_ALLMULTI) || (netdev_mc_count(dev) > 0))
++ filter |= MAC_CONTROL_PM;
++ else
++ filter &= ~MAC_CONTROL_PM;
++
++ sp->eth_regs->mac_control = filter;
++}
++
++static void rx_tasklet_cleanup(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++
++ /**
++ * Tasklet may be scheduled. Need to get it removed from the list
++ * since we're about to free the struct.
++ */
++
++ sp->unloading = 1;
++ tasklet_enable(&sp->rx_tasklet);
++ tasklet_kill(&sp->rx_tasklet);
++}
++
++static int ar231x_remove(struct platform_device *pdev)
++{
++ struct net_device *dev = platform_get_drvdata(pdev);
++ struct ar231x_private *sp = netdev_priv(dev);
++
++ rx_tasklet_cleanup(dev);
++ ar231x_init_cleanup(dev);
++ unregister_netdev(dev);
++ mdiobus_unregister(sp->mii_bus);
++ mdiobus_free(sp->mii_bus);
++ kfree(dev);
++ return 0;
++}
++
++/**
++ * Restart the AR2313 ethernet controller.
++ */
++static int ar231x_restart(struct net_device *dev)
++{
++ /* disable interrupts */
++ disable_irq(dev->irq);
++
++ /* stop mac */
++ ar231x_halt(dev);
++
++ /* initialize */
++ ar231x_init(dev);
++
++ /* enable interrupts */
++ enable_irq(dev->irq);
++
++ return 0;
++}
++
++static struct platform_driver ar231x_driver = {
++ .driver.name = "ar231x-eth",
++ .probe = ar231x_probe,
++ .remove = ar231x_remove,
++};
++
++module_platform_driver(ar231x_driver);
++
++static void ar231x_free_descriptors(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++
++ if (sp->rx_ring != NULL) {
++ kfree((void *)KSEG0ADDR(sp->rx_ring));
++ sp->rx_ring = NULL;
++ sp->tx_ring = NULL;
++ }
++}
++
++static int ar231x_allocate_descriptors(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ int size;
++ int j;
++ ar231x_descr_t *space;
++
++ if (sp->rx_ring != NULL) {
++ printk("%s: already done.\n", __func__);
++ return 0;
++ }
++
++ size = sizeof(ar231x_descr_t) * (AR2313_DESCR_ENTRIES * AR2313_QUEUES);
++ space = kmalloc(size, GFP_KERNEL);
++ if (space == NULL)
++ return 1;
++
++ /* invalidate caches */
++ dma_cache_inv((unsigned int)space, size);
++
++ /* now convert pointer to KSEG1 */
++ space = (ar231x_descr_t *)KSEG1ADDR(space);
++
++ memset((void *)space, 0, size);
++
++ sp->rx_ring = space;
++ space += AR2313_DESCR_ENTRIES;
++
++ sp->tx_ring = space;
++ space += AR2313_DESCR_ENTRIES;
++
++ /* Initialize the transmit Descriptors */
++ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
++ ar231x_descr_t *td = &sp->tx_ring[j];
++
++ td->status = 0;
++ td->devcs = DMA_TX1_CHAINED;
++ td->addr = 0;
++ td->descr = virt_to_phys(&sp->tx_ring[DSC_NEXT(j)]);
++ }
++
++ return 0;
++}
++
++/**
++ * Generic cleanup handling data allocated during init. Used when the
++ * module is unloaded or if an error occurs during initialization
++ */
++static void ar231x_init_cleanup(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ struct sk_buff *skb;
++ int j;
++
++ ar231x_free_descriptors(dev);
++
++ if (sp->eth_regs)
++ iounmap((void *)sp->eth_regs);
++ if (sp->dma_regs)
++ iounmap((void *)sp->dma_regs);
++ if (sp->phy_regs)
++ iounmap((void *)sp->phy_regs);
++
++ if (sp->rx_skb) {
++ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
++ skb = sp->rx_skb[j];
++ if (skb) {
++ sp->rx_skb[j] = NULL;
++ dev_kfree_skb(skb);
++ }
++ }
++ kfree(sp->rx_skb);
++ sp->rx_skb = NULL;
++ }
++
++ if (sp->tx_skb) {
++ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
++ skb = sp->tx_skb[j];
++ if (skb) {
++ sp->tx_skb[j] = NULL;
++ dev_kfree_skb(skb);
++ }
++ }
++ kfree(sp->tx_skb);
++ sp->tx_skb = NULL;
++ }
++}
++
++static int ar231x_reset_reg(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ unsigned int ethsal, ethsah;
++ unsigned int flags;
++
++ sp->cfg->reset_set(sp->cfg->reset_mac);
++ mdelay(10);
++ sp->cfg->reset_clear(sp->cfg->reset_mac);
++ mdelay(10);
++ sp->cfg->reset_set(sp->cfg->reset_phy);
++ mdelay(10);
++ sp->cfg->reset_clear(sp->cfg->reset_phy);
++ mdelay(10);
++
++ sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR);
++ mdelay(10);
++ sp->dma_regs->bus_mode =
++ ((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE);
++
++ /* enable interrupts */
++ sp->dma_regs->intr_ena = DMA_STATUS_AIS | DMA_STATUS_NIS |
++ DMA_STATUS_RI | DMA_STATUS_TI |
++ DMA_STATUS_FBE;
++ sp->dma_regs->xmt_base = virt_to_phys(sp->tx_ring);
++ sp->dma_regs->rcv_base = virt_to_phys(sp->rx_ring);
++ sp->dma_regs->control =
++ (DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF);
++
++ sp->eth_regs->flow_control = (FLOW_CONTROL_FCE);
++ sp->eth_regs->vlan_tag = (0x8100);
++
++ /* Enable Ethernet Interface */
++ flags = (MAC_CONTROL_TE | /* transmit enable */
++ MAC_CONTROL_PM | /* pass mcast */
++ MAC_CONTROL_F | /* full duplex */
++ MAC_CONTROL_HBD); /* heart beat disabled */
++
++ if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
++ flags |= MAC_CONTROL_PR;
++ }
++ sp->eth_regs->mac_control = flags;
++
++ /* Set all Ethernet station address registers to their initial values */
++ ethsah = (((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
++ (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF);
++
++ ethsal = (((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
++ (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
++ (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
++ (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF);
++
++ sp->eth_regs->mac_addr[0] = ethsah;
++ sp->eth_regs->mac_addr[1] = ethsal;
++
++ mdelay(10);
++
++ return 0;
++}
++
++static int ar231x_init(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ int ecode = 0;
++
++ /* Allocate descriptors */
++ if (ar231x_allocate_descriptors(dev)) {
++ printk("%s: %s: ar231x_allocate_descriptors failed\n",
++ dev->name, __func__);
++ ecode = -EAGAIN;
++ goto init_error;
++ }
++
++ /* Get the memory for the skb rings */
++ if (sp->rx_skb == NULL) {
++ sp->rx_skb =
++ kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
++ GFP_KERNEL);
++ if (!(sp->rx_skb)) {
++ printk("%s: %s: rx_skb kmalloc failed\n",
++ dev->name, __func__);
++ ecode = -EAGAIN;
++ goto init_error;
++ }
++ }
++ memset(sp->rx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
++
++ if (sp->tx_skb == NULL) {
++ sp->tx_skb =
++ kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
++ GFP_KERNEL);
++ if (!(sp->tx_skb)) {
++ printk("%s: %s: tx_skb kmalloc failed\n",
++ dev->name, __func__);
++ ecode = -EAGAIN;
++ goto init_error;
++ }
++ }
++ memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
++
++ /**
++ * Set tx_csm before we start receiving interrupts, otherwise
++ * the interrupt handler might think it is supposed to process
++ * tx ints before we are up and running, which may cause a null
++ * pointer access in the int handler.
++ */
++ sp->rx_skbprd = 0;
++ sp->cur_rx = 0;
++ sp->tx_prd = 0;
++ sp->tx_csm = 0;
++
++ /* Zero the stats before starting the interface */
++ memset(&dev->stats, 0, sizeof(dev->stats));
++
++ /**
++ * We load the ring here as there seem to be no way to tell the
++ * firmware to wipe the ring without re-initializing it.
++ */
++ ar231x_load_rx_ring(dev, RX_RING_SIZE);
++
++ /* Init hardware */
++ ar231x_reset_reg(dev);
++
++ /* Get the IRQ */
++ ecode = request_irq(dev->irq, &ar231x_interrupt, 0,
++ dev->name, dev);
++ if (ecode) {
++ printk(KERN_WARNING "%s: %s: Requested IRQ %d is busy\n",
++ dev->name, __func__, dev->irq);
++ goto init_error;
++ }
++
++ tasklet_enable(&sp->rx_tasklet);
++
++ return 0;
++
++init_error:
++ ar231x_init_cleanup(dev);
++ return ecode;
++}
++
++/**
++ * Load the rx ring.
++ *
++ * Loading rings is safe without holding the spin lock since this is
++ * done only before the device is enabled, thus no interrupts are
++ * generated and by the interrupt handler/tasklet handler.
++ */
++static void ar231x_load_rx_ring(struct net_device *dev, int nr_bufs)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ short i, idx;
++
++ idx = sp->rx_skbprd;
++
++ for (i = 0; i < nr_bufs; i++) {
++ struct sk_buff *skb;
++ ar231x_descr_t *rd;
++
++ if (sp->rx_skb[idx])
++ break;
++
++ skb = netdev_alloc_skb_ip_align(dev, AR2313_BUFSIZE);
++ if (!skb) {
++ printk("\n\n\n\n %s: No memory in system\n\n\n\n",
++ __func__);
++ break;
++ }
++
++ /* Make sure IP header starts on a fresh cache line */
++ skb->dev = dev;
++ sp->rx_skb[idx] = skb;
++
++ rd = (ar231x_descr_t *)&sp->rx_ring[idx];
++
++ /* initialize dma descriptor */
++ rd->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
++ DMA_RX1_CHAINED);
++ rd->addr = virt_to_phys(skb->data);
++ rd->descr = virt_to_phys(&sp->rx_ring[DSC_NEXT(idx)]);
++ rd->status = DMA_RX_OWN;
++
++ idx = DSC_NEXT(idx);
++ }
++
++ if (i)
++ sp->rx_skbprd = idx;
++}
++
++#define AR2313_MAX_PKTS_PER_CALL 64
++
++static int ar231x_rx_int(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ struct sk_buff *skb, *skb_new;
++ ar231x_descr_t *rxdesc;
++ unsigned int status;
++ u32 idx;
++ int pkts = 0;
++ int rval;
++
++ idx = sp->cur_rx;
++
++ /* process at most the entire ring and then wait for another int */
++ while (1) {
++ rxdesc = &sp->rx_ring[idx];
++ status = rxdesc->status;
++
++ if (status & DMA_RX_OWN) {
++ /* SiByte owns descriptor or descr not yet filled in */
++ rval = 0;
++ break;
++ }
++
++ if (++pkts > AR2313_MAX_PKTS_PER_CALL) {
++ rval = 1;
++ break;
++ }
++
++ if ((status & DMA_RX_ERROR) && !(status & DMA_RX_LONG)) {
++ dev->stats.rx_errors++;
++ dev->stats.rx_dropped++;
++
++ /* add statistics counters */
++ if (status & DMA_RX_ERR_CRC)
++ dev->stats.rx_crc_errors++;
++ if (status & DMA_RX_ERR_COL)
++ dev->stats.rx_over_errors++;
++ if (status & DMA_RX_ERR_LENGTH)
++ dev->stats.rx_length_errors++;
++ if (status & DMA_RX_ERR_RUNT)
++ dev->stats.rx_over_errors++;
++ if (status & DMA_RX_ERR_DESC)
++ dev->stats.rx_over_errors++;
++
++ } else {
++ /* alloc new buffer. */
++ skb_new = netdev_alloc_skb_ip_align(dev,
++ AR2313_BUFSIZE);
++ if (skb_new != NULL) {
++ skb = sp->rx_skb[idx];
++ /* set skb */
++ skb_put(skb, ((status >> DMA_RX_LEN_SHIFT) &
++ 0x3fff) - CRC_LEN);
++
++ dev->stats.rx_bytes += skb->len;
++ skb->protocol = eth_type_trans(skb, dev);
++ /* pass the packet to upper layers */
++ netif_rx(skb);
++
++ skb_new->dev = dev;
++ /* reset descriptor's curr_addr */
++ rxdesc->addr = virt_to_phys(skb_new->data);
++
++ dev->stats.rx_packets++;
++ sp->rx_skb[idx] = skb_new;
++ } else {
++ dev->stats.rx_dropped++;
++ }
++ }
++
++ rxdesc->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
++ DMA_RX1_CHAINED);
++ rxdesc->status = DMA_RX_OWN;
++
++ idx = DSC_NEXT(idx);
++ }
++
++ sp->cur_rx = idx;
++
++ return rval;
++}
++
++static void ar231x_tx_int(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ u32 idx;
++ struct sk_buff *skb;
++ ar231x_descr_t *txdesc;
++ unsigned int status = 0;
++
++ idx = sp->tx_csm;
++
++ while (idx != sp->tx_prd) {
++ txdesc = &sp->tx_ring[idx];
++ status = txdesc->status;
++
++ if (status & DMA_TX_OWN) {
++ /* ar231x dma still owns descr */
++ break;
++ }
++ /* done with this descriptor */
++ dma_unmap_single(NULL, txdesc->addr,
++ txdesc->devcs & DMA_TX1_BSIZE_MASK,
++ DMA_TO_DEVICE);
++ txdesc->status = 0;
++
++ if (status & DMA_TX_ERROR) {
++ dev->stats.tx_errors++;
++ dev->stats.tx_dropped++;
++ if (status & DMA_TX_ERR_UNDER)
++ dev->stats.tx_fifo_errors++;
++ if (status & DMA_TX_ERR_HB)
++ dev->stats.tx_heartbeat_errors++;
++ if (status & (DMA_TX_ERR_LOSS | DMA_TX_ERR_LINK))
++ dev->stats.tx_carrier_errors++;
++ if (status & (DMA_TX_ERR_LATE | DMA_TX_ERR_COL |
++ DMA_TX_ERR_JABBER | DMA_TX_ERR_DEFER))
++ dev->stats.tx_aborted_errors++;
++ } else {
++ /* transmit OK */
++ dev->stats.tx_packets++;
++ }
++
++ skb = sp->tx_skb[idx];
++ sp->tx_skb[idx] = NULL;
++ idx = DSC_NEXT(idx);
++ dev->stats.tx_bytes += skb->len;
++ dev_kfree_skb_irq(skb);
++ }
++
++ sp->tx_csm = idx;
++}
++
++static void rx_tasklet_func(unsigned long data)
++{
++ struct net_device *dev = (struct net_device *)data;
++ struct ar231x_private *sp = netdev_priv(dev);
++
++ if (sp->unloading)
++ return;
++
++ if (ar231x_rx_int(dev)) {
++ tasklet_hi_schedule(&sp->rx_tasklet);
++ } else {
++ unsigned long flags;
++
++ spin_lock_irqsave(&sp->lock, flags);
++ sp->dma_regs->intr_ena |= DMA_STATUS_RI;
++ spin_unlock_irqrestore(&sp->lock, flags);
++ }
++}
++
++static void rx_schedule(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++
++ sp->dma_regs->intr_ena &= ~DMA_STATUS_RI;
++
++ tasklet_hi_schedule(&sp->rx_tasklet);
++}
++
++static irqreturn_t ar231x_interrupt(int irq, void *dev_id)
++{
++ struct net_device *dev = (struct net_device *)dev_id;
++ struct ar231x_private *sp = netdev_priv(dev);
++ unsigned int status, enabled;
++
++ /* clear interrupt */
++ /* Don't clear RI bit if currently disabled */
++ status = sp->dma_regs->status;
++ enabled = sp->dma_regs->intr_ena;
++ sp->dma_regs->status = status & enabled;
++
++ if (status & DMA_STATUS_NIS) {
++ /* normal status */
++ /**
++ * Don't schedule rx processing if interrupt
++ * is already disabled.
++ */
++ if (status & enabled & DMA_STATUS_RI) {
++ /* receive interrupt */
++ rx_schedule(dev);
++ }
++ if (status & DMA_STATUS_TI) {
++ /* transmit interrupt */
++ ar231x_tx_int(dev);
++ }
++ }
++
++ /* abnormal status */
++ if (status & (DMA_STATUS_FBE | DMA_STATUS_TPS))
++ ar231x_restart(dev);
++
++ return IRQ_HANDLED;
++}
++
++static int ar231x_open(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ unsigned int ethsal, ethsah;
++
++ /* reset the hardware, in case the MAC address changed */
++ ethsah = (((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
++ (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF);
++
++ ethsal = (((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
++ (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
++ (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
++ (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF);
++
++ sp->eth_regs->mac_addr[0] = ethsah;
++ sp->eth_regs->mac_addr[1] = ethsal;
++
++ mdelay(10);
++
++ dev->mtu = 1500;
++ netif_start_queue(dev);
++
++ sp->eth_regs->mac_control |= MAC_CONTROL_RE;
++
++ phy_start(sp->phy_dev);
++
++ return 0;
++}
++
++static void ar231x_tx_timeout(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ unsigned long flags;
++
++ spin_lock_irqsave(&sp->lock, flags);
++ ar231x_restart(dev);
++ spin_unlock_irqrestore(&sp->lock, flags);
++}
++
++static void ar231x_halt(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ int j;
++
++ tasklet_disable(&sp->rx_tasklet);
++
++ /* kill the MAC */
++ sp->eth_regs->mac_control &= ~(MAC_CONTROL_RE | /* disable Receives */
++ MAC_CONTROL_TE); /* disable Transmits */
++ /* stop dma */
++ sp->dma_regs->control = 0;
++ sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR;
++
++ /* place phy and MAC in reset */
++ sp->cfg->reset_set(sp->cfg->reset_mac);
++ sp->cfg->reset_set(sp->cfg->reset_phy);
++
++ /* free buffers on tx ring */
++ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
++ struct sk_buff *skb;
++ ar231x_descr_t *txdesc;
++
++ txdesc = &sp->tx_ring[j];
++ txdesc->descr = 0;
++
++ skb = sp->tx_skb[j];
++ if (skb) {
++ dev_kfree_skb(skb);
++ sp->tx_skb[j] = NULL;
++ }
++ }
++}
++
++/**
++ * close should do nothing. Here's why. It's called when
++ * 'ifconfig bond0 down' is run. If it calls free_irq then
++ * the irq is gone forever ! When bond0 is made 'up' again,
++ * the ar231x_open () does not call request_irq (). Worse,
++ * the call to ar231x_halt() generates a WDOG reset due to
++ * the write to reset register and the box reboots.
++ * Commenting this out is good since it allows the
++ * system to resume when bond0 is made up again.
++ */
++static int ar231x_close(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++#if 0
++ /* Disable interrupts */
++ disable_irq(dev->irq);
++
++ /**
++ * Without (or before) releasing irq and stopping hardware, this
++ * is an absolute non-sense, by the way. It will be reset instantly
++ * by the first irq.
++ */
++ netif_stop_queue(dev);
++
++ /* stop the MAC and DMA engines */
++ ar231x_halt(dev);
++
++ /* release the interrupt */
++ free_irq(dev->irq, dev);
++
++#endif
++
++ phy_stop(sp->phy_dev);
++
++ return 0;
++}
++
++static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ ar231x_descr_t *td;
++ u32 idx;
++
++ idx = sp->tx_prd;
++ td = &sp->tx_ring[idx];
++
++ if (td->status & DMA_TX_OWN) {
++ /* free skbuf and lie to the caller that we sent it out */
++ dev->stats.tx_dropped++;
++ dev_kfree_skb(skb);
++
++ /* restart transmitter in case locked */
++ sp->dma_regs->xmt_poll = 0;
++ return 0;
++ }
++
++ /* Setup the transmit descriptor. */
++ td->devcs = ((skb->len << DMA_TX1_BSIZE_SHIFT) |
++ (DMA_TX1_LS | DMA_TX1_IC | DMA_TX1_CHAINED));
++ td->addr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE);
++ td->status = DMA_TX_OWN;
++
++ /* kick transmitter last */
++ sp->dma_regs->xmt_poll = 0;
++
++ sp->tx_skb[idx] = skb;
++ idx = DSC_NEXT(idx);
++ sp->tx_prd = idx;
++
++ return 0;
++}
++
++static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++
++ switch (cmd) {
++ case SIOCGMIIPHY:
++ case SIOCGMIIREG:
++ case SIOCSMIIREG:
++ return phy_mii_ioctl(sp->phy_dev, ifr, cmd);
++
++ default:
++ break;
++ }
++
++ return -EOPNOTSUPP;
++}
++
++static void ar231x_adjust_link(struct net_device *dev)
++{
++ struct ar231x_private *sp = netdev_priv(dev);
++ struct phy_device *phydev = sp->phy_dev;
++ u32 mc;
++
++ if (!phydev->link) {
++ if (sp->link) {
++ pr_info("%s: link down\n", dev->name);
++ sp->link = 0;
++ }
++ return;
++ }
++ sp->link = 1;
++
++ pr_info("%s: link up (%uMbps/%s duplex)\n", dev->name,
++ phydev->speed, phydev->duplex ? "full" : "half");
++
++ mc = sp->eth_regs->mac_control;
++ if (phydev->duplex)
++ mc = (mc | MAC_CONTROL_F) & ~MAC_CONTROL_DRO;
++ else
++ mc = (mc | MAC_CONTROL_DRO) & ~MAC_CONTROL_F;
++ sp->eth_regs->mac_control = mc;
++ sp->duplex = phydev->duplex;
++}
++
++#define MII_ADDR(phy, reg) \
++ ((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT))
++
++static int
++ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
++{
++ struct net_device *const dev = bus->priv;
++ struct ar231x_private *sp = netdev_priv(dev);
++ volatile MII *ethernet = sp->phy_regs;
++
++ ethernet->mii_addr = MII_ADDR(phy_addr, regnum);
++ while (ethernet->mii_addr & MII_ADDR_BUSY)
++ ;
++ return ethernet->mii_data >> MII_DATA_SHIFT;
++}
++
++static int
++ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value)
++{
++ struct net_device *const dev = bus->priv;
++ struct ar231x_private *sp = netdev_priv(dev);
++ volatile MII *ethernet = sp->phy_regs;
++
++ while (ethernet->mii_addr & MII_ADDR_BUSY)
++ ;
++ ethernet->mii_data = value << MII_DATA_SHIFT;
++ ethernet->mii_addr = MII_ADDR(phy_addr, regnum) | MII_ADDR_WRITE;
++
++ return 0;
++}
++
++static int ar231x_mdiobus_reset(struct mii_bus *bus)
++{
++ struct net_device *const dev = bus->priv;
++
++ ar231x_reset_reg(dev);
++
++ return 0;
++}
++
++static int ar231x_mdiobus_probe(struct net_device *dev)
++{
++ struct ar231x_private *const sp = netdev_priv(dev);
++ struct phy_device *phydev = NULL;
++
++ /* find the first (lowest address) PHY on the current MAC's MII bus */
++ phydev = phy_find_first(sp->mii_bus);
++ if (!phydev) {
++ printk(KERN_ERR "ar231x: %s: no PHY found\n", dev->name);
++ return -1;
++ }
++
++ /* now we are supposed to have a proper phydev, to attach to... */
++ BUG_ON(phydev->attached_dev);
++
++ phydev = phy_connect(dev, phydev_name(phydev), &ar231x_adjust_link,
++ PHY_INTERFACE_MODE_MII);
++ if (IS_ERR(phydev)) {
++ printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
++ return PTR_ERR(phydev);
++ }
++
++ /* mask with MAC supported features */
++ phydev->supported &= (SUPPORTED_10baseT_Half
++ | SUPPORTED_10baseT_Full
++ | SUPPORTED_100baseT_Half
++ | SUPPORTED_100baseT_Full
++ | SUPPORTED_Autoneg
++ /* | SUPPORTED_Pause | SUPPORTED_Asym_Pause */
++ | SUPPORTED_MII
++ | SUPPORTED_TP);
++
++ phydev->advertising = phydev->supported;
++
++ sp->phy_dev = phydev;
++
++ printk(KERN_INFO "%s: attached PHY driver [%s] (mii_bus:phy_addr=%s)\n",
++ dev->name, phydev->drv->name, phydev_name(phydev));
++
++ return 0;
++}
++
+--- /dev/null
++++ b/drivers/net/ethernet/atheros/ar231x/ar231x.h
+@@ -0,0 +1,281 @@
++/*
++ * ar231x.h: Linux driver for the Atheros AR231x Ethernet device.
++ *
++ * Copyright (C) 2004 by Sameer Dekate <sdekate at arubanetworks.com>
++ * Copyright (C) 2006 Imre Kaloz <kaloz at openwrt.org>
++ * Copyright (C) 2006-2009 Felix Fietkau <nbd at nbd.name>
++ *
++ * Thanks to Atheros for providing hardware and documentation
++ * enabling me to write this driver.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef _AR2313_H_
++#define _AR2313_H_
++
++#include <linux/interrupt.h>
++#include <generated/autoconf.h>
++#include <linux/bitops.h>
++#include <ath25_platform.h>
++
++/* probe link timer - 5 secs */
++#define LINK_TIMER (5*HZ)
++
++#define IS_DMA_TX_INT(X) (((X) & (DMA_STATUS_TI)) != 0)
++#define IS_DMA_RX_INT(X) (((X) & (DMA_STATUS_RI)) != 0)
++#define IS_DRIVER_OWNED(X) (((X) & (DMA_TX_OWN)) == 0)
++
++#define AR2313_TX_TIMEOUT (HZ/4)
++
++/* Rings */
++#define DSC_RING_ENTRIES_SIZE (AR2313_DESCR_ENTRIES * sizeof(struct desc))
++#define DSC_NEXT(idx) ((idx + 1) & (AR2313_DESCR_ENTRIES - 1))
++
++#define AR2313_MBGET 2
++#define AR2313_MBSET 3
++#define AR2313_PCI_RECONFIG 4
++#define AR2313_PCI_DUMP 5
++#define AR2313_TEST_PANIC 6
++#define AR2313_TEST_NULLPTR 7
++#define AR2313_READ_DATA 8
++#define AR2313_WRITE_DATA 9
++#define AR2313_GET_VERSION 10
++#define AR2313_TEST_HANG 11
++#define AR2313_SYNC 12
++
++#define DMA_RX_ERR_CRC BIT(1)
++#define DMA_RX_ERR_DRIB BIT(2)
++#define DMA_RX_ERR_MII BIT(3)
++#define DMA_RX_EV2 BIT(5)
++#define DMA_RX_ERR_COL BIT(6)
++#define DMA_RX_LONG BIT(7)
++#define DMA_RX_LS BIT(8) /* last descriptor */
++#define DMA_RX_FS BIT(9) /* first descriptor */
++#define DMA_RX_MF BIT(10) /* multicast frame */
++#define DMA_RX_ERR_RUNT BIT(11) /* runt frame */
++#define DMA_RX_ERR_LENGTH BIT(12) /* length error */
++#define DMA_RX_ERR_DESC BIT(14) /* descriptor error */
++#define DMA_RX_ERROR BIT(15) /* error summary */
++#define DMA_RX_LEN_MASK 0x3fff0000
++#define DMA_RX_LEN_SHIFT 16
++#define DMA_RX_FILT BIT(30)
++#define DMA_RX_OWN BIT(31) /* desc owned by DMA controller */
++
++#define DMA_RX1_BSIZE_MASK 0x000007ff
++#define DMA_RX1_BSIZE_SHIFT 0
++#define DMA_RX1_CHAINED BIT(24)
++#define DMA_RX1_RER BIT(25)
++
++#define DMA_TX_ERR_UNDER BIT(1) /* underflow error */
++#define DMA_TX_ERR_DEFER BIT(2) /* excessive deferral */
++#define DMA_TX_COL_MASK 0x78
++#define DMA_TX_COL_SHIFT 3
++#define DMA_TX_ERR_HB BIT(7) /* hearbeat failure */
++#define DMA_TX_ERR_COL BIT(8) /* excessive collisions */
++#define DMA_TX_ERR_LATE BIT(9) /* late collision */
++#define DMA_TX_ERR_LINK BIT(10) /* no carrier */
++#define DMA_TX_ERR_LOSS BIT(11) /* loss of carrier */
++#define DMA_TX_ERR_JABBER BIT(14) /* transmit jabber timeout */
++#define DMA_TX_ERROR BIT(15) /* frame aborted */
++#define DMA_TX_OWN BIT(31) /* descr owned by DMA controller */
++
++#define DMA_TX1_BSIZE_MASK 0x000007ff
++#define DMA_TX1_BSIZE_SHIFT 0
++#define DMA_TX1_CHAINED BIT(24) /* chained descriptors */
++#define DMA_TX1_TER BIT(25) /* transmit end of ring */
++#define DMA_TX1_FS BIT(29) /* first segment */
++#define DMA_TX1_LS BIT(30) /* last segment */
++#define DMA_TX1_IC BIT(31) /* interrupt on completion */
++
++#define RCVPKT_LENGTH(X) (X >> 16) /* Received pkt Length */
++
++#define MAC_CONTROL_RE BIT(2) /* receive enable */
++#define MAC_CONTROL_TE BIT(3) /* transmit enable */
++#define MAC_CONTROL_DC BIT(5) /* Deferral check */
++#define MAC_CONTROL_ASTP BIT(8) /* Auto pad strip */
++#define MAC_CONTROL_DRTY BIT(10) /* Disable retry */
++#define MAC_CONTROL_DBF BIT(11) /* Disable bcast frames */
++#define MAC_CONTROL_LCC BIT(12) /* late collision ctrl */
++#define MAC_CONTROL_HP BIT(13) /* Hash Perfect filtering */
++#define MAC_CONTROL_HASH BIT(14) /* Unicast hash filtering */
++#define MAC_CONTROL_HO BIT(15) /* Hash only filtering */
++#define MAC_CONTROL_PB BIT(16) /* Pass Bad frames */
++#define MAC_CONTROL_IF BIT(17) /* Inverse filtering */
++#define MAC_CONTROL_PR BIT(18) /* promis mode (valid frames only) */
++#define MAC_CONTROL_PM BIT(19) /* pass multicast */
++#define MAC_CONTROL_F BIT(20) /* full-duplex */
++#define MAC_CONTROL_DRO BIT(23) /* Disable Receive Own */
++#define MAC_CONTROL_HBD BIT(28) /* heart-beat disabled (MUST BE SET) */
++#define MAC_CONTROL_BLE BIT(30) /* big endian mode */
++#define MAC_CONTROL_RA BIT(31) /* rcv all (valid and invalid frames) */
++
++#define MII_ADDR_BUSY BIT(0)
++#define MII_ADDR_WRITE BIT(1)
++#define MII_ADDR_REG_SHIFT 6
++#define MII_ADDR_PHY_SHIFT 11
++#define MII_DATA_SHIFT 0
++
++#define FLOW_CONTROL_FCE BIT(1)
++
++#define DMA_BUS_MODE_SWR BIT(0) /* software reset */
++#define DMA_BUS_MODE_BLE BIT(7) /* big endian mode */
++#define DMA_BUS_MODE_PBL_SHIFT 8 /* programmable burst length 32 */
++#define DMA_BUS_MODE_DBO BIT(20) /* big-endian descriptors */
++
++#define DMA_STATUS_TI BIT(0) /* transmit interrupt */
++#define DMA_STATUS_TPS BIT(1) /* transmit process stopped */
++#define DMA_STATUS_TU BIT(2) /* transmit buffer unavailable */
++#define DMA_STATUS_TJT BIT(3) /* transmit buffer timeout */
++#define DMA_STATUS_UNF BIT(5) /* transmit underflow */
++#define DMA_STATUS_RI BIT(6) /* receive interrupt */
++#define DMA_STATUS_RU BIT(7) /* receive buffer unavailable */
++#define DMA_STATUS_RPS BIT(8) /* receive process stopped */
++#define DMA_STATUS_ETI BIT(10) /* early transmit interrupt */
++#define DMA_STATUS_FBE BIT(13) /* fatal bus interrupt */
++#define DMA_STATUS_ERI BIT(14) /* early receive interrupt */
++#define DMA_STATUS_AIS BIT(15) /* abnormal interrupt summary */
++#define DMA_STATUS_NIS BIT(16) /* normal interrupt summary */
++#define DMA_STATUS_RS_SHIFT 17 /* receive process state */
++#define DMA_STATUS_TS_SHIFT 20 /* transmit process state */
++#define DMA_STATUS_EB_SHIFT 23 /* error bits */
++
++#define DMA_CONTROL_SR BIT(1) /* start receive */
++#define DMA_CONTROL_ST BIT(13) /* start transmit */
++#define DMA_CONTROL_SF BIT(21) /* store and forward */
++
++typedef struct {
++ volatile unsigned int status; /* OWN, Device control and status. */
++ volatile unsigned int devcs; /* pkt Control bits + Length */
++ volatile unsigned int addr; /* Current Address. */
++ volatile unsigned int descr; /* Next descriptor in chain. */
++} ar231x_descr_t;
++
++/**
++ * New Combo structure for Both Eth0 AND eth1
++ *
++ * Don't directly access MII related regs since phy chip could be actually
++ * connected to another ethernet block.
++ */
++typedef struct {
++ volatile unsigned int mac_control; /* 0x00 */
++ volatile unsigned int mac_addr[2]; /* 0x04 - 0x08 */
++ volatile unsigned int mcast_table[2]; /* 0x0c - 0x10 */
++ volatile unsigned int __mii_addr; /* 0x14 */
++ volatile unsigned int __mii_data; /* 0x18 */
++ volatile unsigned int flow_control; /* 0x1c */
++ volatile unsigned int vlan_tag; /* 0x20 */
++ volatile unsigned int pad[7]; /* 0x24 - 0x3c */
++ volatile unsigned int ucast_table[8]; /* 0x40-0x5c */
++} ETHERNET_STRUCT;
++
++typedef struct {
++ volatile unsigned int mii_addr;
++ volatile unsigned int mii_data;
++} MII;
++
++/********************************************************************
++ * Interrupt controller
++ ********************************************************************/
++
++typedef struct {
++ volatile unsigned int wdog_control; /* 0x08 */
++ volatile unsigned int wdog_timer; /* 0x0c */
++ volatile unsigned int misc_status; /* 0x10 */
++ volatile unsigned int misc_mask; /* 0x14 */
++ volatile unsigned int global_status; /* 0x18 */
++ volatile unsigned int reserved; /* 0x1c */
++ volatile unsigned int reset_control; /* 0x20 */
++} INTERRUPT;
++
++/********************************************************************
++ * DMA controller
++ ********************************************************************/
++typedef struct {
++ volatile unsigned int bus_mode; /* 0x00 (CSR0) */
++ volatile unsigned int xmt_poll; /* 0x04 (CSR1) */
++ volatile unsigned int rcv_poll; /* 0x08 (CSR2) */
++ volatile unsigned int rcv_base; /* 0x0c (CSR3) */
++ volatile unsigned int xmt_base; /* 0x10 (CSR4) */
++ volatile unsigned int status; /* 0x14 (CSR5) */
++ volatile unsigned int control; /* 0x18 (CSR6) */
++ volatile unsigned int intr_ena; /* 0x1c (CSR7) */
++ volatile unsigned int rcv_missed; /* 0x20 (CSR8) */
++ volatile unsigned int reserved[11]; /* 0x24-0x4c (CSR9-19) */
++ volatile unsigned int cur_tx_buf_addr; /* 0x50 (CSR20) */
++ volatile unsigned int cur_rx_buf_addr; /* 0x50 (CSR21) */
++} DMA;
++
++/**
++ * Struct private for the Sibyte.
++ *
++ * Elements are grouped so variables used by the tx handling goes
++ * together, and will go into the same cache lines etc. in order to
++ * avoid cache line contention between the rx and tx handling on SMP.
++ *
++ * Frequently accessed variables are put at the beginning of the
++ * struct to help the compiler generate better/shorter code.
++ */
++struct ar231x_private {
++ struct net_device *dev;
++ int version;
++ u32 mb[2];
++
++ volatile MII *phy_regs;
++ volatile ETHERNET_STRUCT *eth_regs;
++ volatile DMA *dma_regs;
++ struct ar231x_eth *cfg;
++
++ spinlock_t lock; /* Serialise access to device */
++
++ /* RX and TX descriptors, must be adjacent */
++ ar231x_descr_t *rx_ring;
++ ar231x_descr_t *tx_ring;
++
++ struct sk_buff **rx_skb;
++ struct sk_buff **tx_skb;
++
++ /* RX elements */
++ u32 rx_skbprd;
++ u32 cur_rx;
++
++ /* TX elements */
++ u32 tx_prd;
++ u32 tx_csm;
++
++ /* Misc elements */
++ char name[48];
++ struct {
++ u32 address;
++ u32 length;
++ char *mapping;
++ } desc;
++
++ unsigned short link; /* 0 - link down, 1 - link up */
++ unsigned short duplex; /* 0 - half, 1 - full */
++
++ struct tasklet_struct rx_tasklet;
++ int unloading;
++
++ struct phy_device *phy_dev;
++ struct mii_bus *mii_bus;
++};
++
++/* Prototypes */
++static int ar231x_init(struct net_device *dev);
++#ifdef TX_TIMEOUT
++static void ar231x_tx_timeout(struct net_device *dev);
++#endif
++static int ar231x_restart(struct net_device *dev);
++static void ar231x_load_rx_ring(struct net_device *dev, int bufs);
++static irqreturn_t ar231x_interrupt(int irq, void *dev_id);
++static int ar231x_open(struct net_device *dev);
++static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev);
++static int ar231x_close(struct net_device *dev);
++static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
++static void ar231x_init_cleanup(struct net_device *dev);
++
++#endif /* _AR2313_H_ */
+--- a/arch/mips/ath25/ar2315_regs.h
++++ b/arch/mips/ath25/ar2315_regs.h
+@@ -57,6 +57,9 @@
+ #define AR2315_PCI_EXT_BASE 0x80000000 /* PCI external */
+ #define AR2315_PCI_EXT_SIZE 0x40000000
+
++/* MII registers offset inside Ethernet MMR region */
++#define AR2315_ENET0_MII_BASE (AR2315_ENET0_BASE + 0x14)
++
+ /*
+ * Configuration registers
+ */
+--- a/arch/mips/ath25/ar5312_regs.h
++++ b/arch/mips/ath25/ar5312_regs.h
+@@ -64,6 +64,10 @@
+ #define AR5312_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
+ #define AR5312_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */
+
++/* MII registers offset inside Ethernet MMR region */
++#define AR5312_ENET0_MII_BASE (AR5312_ENET0_BASE + 0x14)
++#define AR5312_ENET1_MII_BASE (AR5312_ENET1_BASE + 0x14)
++
+ /* Reset/Timer Block Address Map */
+ #define AR5312_TIMER 0x0000 /* countdown timer */
+ #define AR5312_RELOAD 0x0004 /* timer reload value */
+--- a/arch/mips/ath25/ar2315.c
++++ b/arch/mips/ath25/ar2315.c
+@@ -136,6 +136,8 @@ static void ar2315_irq_dispatch(void)
+
+ if (pending & CAUSEF_IP3)
+ do_IRQ(AR2315_IRQ_WLAN0);
++ else if (pending & CAUSEF_IP4)
++ do_IRQ(AR2315_IRQ_ENET0);
+ #ifdef CONFIG_PCI_AR2315
+ else if (pending & CAUSEF_IP5)
+ do_IRQ(AR2315_IRQ_LCBUS_PCI);
+@@ -169,6 +171,29 @@ void __init ar2315_arch_init_irq(void)
+ ar2315_misc_irq_domain = domain;
+ }
+
++static void ar2315_device_reset_set(u32 mask)
++{
++ u32 val;
++
++ val = ar2315_rst_reg_read(AR2315_RESET);
++ ar2315_rst_reg_write(AR2315_RESET, val | mask);
++}
++
++static void ar2315_device_reset_clear(u32 mask)
++{
++ u32 val;
++
++ val = ar2315_rst_reg_read(AR2315_RESET);
++ ar2315_rst_reg_write(AR2315_RESET, val & ~mask);
++}
++
++static struct ar231x_eth ar2315_eth_data = {
++ .reset_set = ar2315_device_reset_set,
++ .reset_clear = ar2315_device_reset_clear,
++ .reset_mac = AR2315_RESET_ENET0,
++ .reset_phy = AR2315_RESET_EPHY0,
++};
++
+ static struct resource ar2315_gpio_res[] = {
+ {
+ .name = "ar2315-gpio",
+@@ -205,6 +230,11 @@ void __init ar2315_init_devices(void)
+ ar2315_gpio_res[1].end = ar2315_gpio_res[1].start;
+ platform_device_register(&ar2315_gpio);
+
++ ar2315_eth_data.macaddr = ath25_board.config->enet0_mac;
++ ath25_add_ethernet(0, AR2315_ENET0_BASE, "eth0_mii",
++ AR2315_ENET0_MII_BASE, AR2315_IRQ_ENET0,
++ &ar2315_eth_data);
++
+ ath25_add_wmac(0, AR2315_WLAN0_BASE, AR2315_IRQ_WLAN0);
+ }
+
+--- a/arch/mips/ath25/ar5312.c
++++ b/arch/mips/ath25/ar5312.c
+@@ -132,6 +132,10 @@ static void ar5312_irq_dispatch(void)
+
+ if (pending & CAUSEF_IP2)
+ do_IRQ(AR5312_IRQ_WLAN0);
++ else if (pending & CAUSEF_IP3)
++ do_IRQ(AR5312_IRQ_ENET0);
++ else if (pending & CAUSEF_IP4)
++ do_IRQ(AR5312_IRQ_ENET1);
+ else if (pending & CAUSEF_IP5)
+ do_IRQ(AR5312_IRQ_WLAN1);
+ else if (pending & CAUSEF_IP6)
+@@ -163,6 +167,36 @@ void __init ar5312_arch_init_irq(void)
+ ar5312_misc_irq_domain = domain;
+ }
+
++static void ar5312_device_reset_set(u32 mask)
++{
++ u32 val;
++
++ val = ar5312_rst_reg_read(AR5312_RESET);
++ ar5312_rst_reg_write(AR5312_RESET, val | mask);
++}
++
++static void ar5312_device_reset_clear(u32 mask)
++{
++ u32 val;
++
++ val = ar5312_rst_reg_read(AR5312_RESET);
++ ar5312_rst_reg_write(AR5312_RESET, val & ~mask);
++}
++
++static struct ar231x_eth ar5312_eth0_data = {
++ .reset_set = ar5312_device_reset_set,
++ .reset_clear = ar5312_device_reset_clear,
++ .reset_mac = AR5312_RESET_ENET0,
++ .reset_phy = AR5312_RESET_EPHY0,
++};
++
++static struct ar231x_eth ar5312_eth1_data = {
++ .reset_set = ar5312_device_reset_set,
++ .reset_clear = ar5312_device_reset_clear,
++ .reset_mac = AR5312_RESET_ENET1,
++ .reset_phy = AR5312_RESET_EPHY1,
++};
++
+ static struct physmap_flash_data ar5312_flash_data = {
+ .width = 2,
+ };
+@@ -243,6 +277,7 @@ static void __init ar5312_flash_init(voi
+ void __init ar5312_init_devices(void)
+ {
+ struct ath25_boarddata *config;
++ u8 *c;
+
+ ar5312_flash_init();
+
+@@ -266,8 +301,30 @@ void __init ar5312_init_devices(void)
+
+ platform_device_register(&ar5312_gpio);
+
++ /* Fix up MAC addresses if necessary */
++ if (is_broadcast_ether_addr(config->enet0_mac))
++ ether_addr_copy(config->enet0_mac, config->enet1_mac);
++
++ /* If ENET0 and ENET1 have the same mac address,
++ * increment the one from ENET1 */
++ if (ether_addr_equal(config->enet0_mac, config->enet1_mac)) {
++ c = config->enet1_mac + 5;
++ while ((c >= config->enet1_mac) && !(++(*c)))
++ c--;
++ }
++
+ switch (ath25_soc) {
+ case ATH25_SOC_AR5312:
++ ar5312_eth0_data.macaddr = config->enet0_mac;
++ ath25_add_ethernet(0, AR5312_ENET0_BASE, "eth0_mii",
++ AR5312_ENET0_MII_BASE, AR5312_IRQ_ENET0,
++ &ar5312_eth0_data);
++
++ ar5312_eth1_data.macaddr = config->enet1_mac;
++ ath25_add_ethernet(1, AR5312_ENET1_BASE, "eth1_mii",
++ AR5312_ENET1_MII_BASE, AR5312_IRQ_ENET1,
++ &ar5312_eth1_data);
++
+ if (!ath25_board.radio)
+ return;
+
+@@ -276,8 +333,18 @@ void __init ar5312_init_devices(void)
+
+ ath25_add_wmac(0, AR5312_WLAN0_BASE, AR5312_IRQ_WLAN0);
+ break;
++ /*
++ * AR2312/3 ethernet uses the PHY of ENET0, but the MAC
++ * of ENET1. Atheros calls it 'twisted' for a reason :)
++ */
+ case ATH25_SOC_AR2312:
+ case ATH25_SOC_AR2313:
++ ar5312_eth1_data.reset_phy = ar5312_eth0_data.reset_phy;
++ ar5312_eth1_data.macaddr = config->enet0_mac;
++ ath25_add_ethernet(1, AR5312_ENET1_BASE, "eth0_mii",
++ AR5312_ENET0_MII_BASE, AR5312_IRQ_ENET1,
++ &ar5312_eth1_data);
++
+ if (!ath25_board.radio)
+ return;
+ break;
+--- a/arch/mips/ath25/devices.h
++++ b/arch/mips/ath25/devices.h
+@@ -33,6 +33,8 @@ extern struct ar231x_board_config ath25_
+ extern void (*ath25_irq_dispatch)(void);
+
+ int ath25_find_config(phys_addr_t offset, unsigned long size);
++int ath25_add_ethernet(int nr, u32 base, const char *mii_name, u32 mii_base,
++ int irq, void *pdata);
+ void ath25_serial_setup(u32 mapbase, int irq, unsigned int uartclk);
+ int ath25_add_wmac(int nr, u32 base, int irq);
+
+--- a/arch/mips/ath25/devices.c
++++ b/arch/mips/ath25/devices.c
+@@ -13,6 +13,51 @@
+ struct ar231x_board_config ath25_board;
+ enum ath25_soc_type ath25_soc = ATH25_SOC_UNKNOWN;
+
++static struct resource ath25_eth0_res[] = {
++ {
++ .name = "eth0_membase",
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .name = "eth0_mii",
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .name = "eth0_irq",
++ .flags = IORESOURCE_IRQ,
++ }
++};
++
++static struct resource ath25_eth1_res[] = {
++ {
++ .name = "eth1_membase",
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .name = "eth1_mii",
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .name = "eth1_irq",
++ .flags = IORESOURCE_IRQ,
++ }
++};
++
++static struct platform_device ath25_eth[] = {
++ {
++ .id = 0,
++ .name = "ar231x-eth",
++ .resource = ath25_eth0_res,
++ .num_resources = ARRAY_SIZE(ath25_eth0_res)
++ },
++ {
++ .id = 1,
++ .name = "ar231x-eth",
++ .resource = ath25_eth1_res,
++ .num_resources = ARRAY_SIZE(ath25_eth1_res)
++ }
++};
++
+ static struct resource ath25_wmac0_res[] = {
+ {
+ .name = "wmac0_membase",
+@@ -71,6 +116,25 @@ const char *get_system_type(void)
+ return soc_type_strings[ath25_soc];
+ }
+
++int __init ath25_add_ethernet(int nr, u32 base, const char *mii_name,
++ u32 mii_base, int irq, void *pdata)
++{
++ struct resource *res;
++
++ ath25_eth[nr].dev.platform_data = pdata;
++ res = &ath25_eth[nr].resource[0];
++ res->start = base;
++ res->end = base + 0x2000 - 1;
++ res++;
++ res->name = mii_name;
++ res->start = mii_base;
++ res->end = mii_base + 8 - 1;
++ res++;
++ res->start = irq;
++ res->end = irq;
++ return platform_device_register(&ath25_eth[nr]);
++}
++
+ void __init ath25_serial_setup(u32 mapbase, int irq, unsigned int uartclk)
+ {
+ struct uart_port s;
+--- a/arch/mips/include/asm/mach-ath25/ath25_platform.h
++++ b/arch/mips/include/asm/mach-ath25/ath25_platform.h
+@@ -71,4 +71,15 @@ struct ar231x_board_config {
+ const char *radio;
+ };
+
++/*
++ * Platform device information for the Ethernet MAC
++ */
++struct ar231x_eth {
++ void (*reset_set)(u32);
++ void (*reset_clear)(u32);
++ u32 reset_mac;
++ u32 reset_phy;
++ char *macaddr;
++};
++
+ #endif /* __ASM_MACH_ATH25_PLATFORM_H */
diff --git a/target/linux/ath25/patches-5.4/120-spiflash.patch b/target/linux/ath25/patches-5.4/120-spiflash.patch
new file mode 100644
index 0000000000..0a2161fb7e
--- /dev/null
+++ b/target/linux/ath25/patches-5.4/120-spiflash.patch
@@ -0,0 +1,634 @@
+--- a/drivers/mtd/devices/Kconfig
++++ b/drivers/mtd/devices/Kconfig
+@@ -130,6 +130,10 @@ config MTD_BCM47XXSFLASH
+ registered by bcma as platform devices. This enables driver for
+ serial flash memories.
+
++config MTD_AR2315
++ tristate "Atheros AR2315+ SPI Flash support"
++ depends on SOC_AR2315
++
+ config MTD_SLRAM
+ tristate "Uncached system RAM"
+ help
+--- a/drivers/mtd/devices/Makefile
++++ b/drivers/mtd/devices/Makefile
+@@ -16,6 +16,7 @@ obj-$(CONFIG_MTD_M25P80) += m25p80.o
+ obj-$(CONFIG_MTD_MCHP23K256) += mchp23k256.o
+ obj-$(CONFIG_MTD_SPEAR_SMI) += spear_smi.o
+ obj-$(CONFIG_MTD_SST25L) += sst25l.o
++obj-$(CONFIG_MTD_AR2315) += ar2315.o
+ obj-$(CONFIG_MTD_BCM47XXSFLASH) += bcm47xxsflash.o
+ obj-$(CONFIG_MTD_ST_SPI_FSM) += st_spi_fsm.o
+ obj-$(CONFIG_MTD_POWERNV_FLASH) += powernv_flash.o
+--- /dev/null
++++ b/drivers/mtd/devices/ar2315.c
+@@ -0,0 +1,459 @@
++
++/*
++ * MTD driver for the SPI Flash Memory support on Atheros AR2315
++ *
++ * Copyright (c) 2005-2006 Atheros Communications Inc.
++ * Copyright (C) 2006-2007 FON Technology, SL.
++ * Copyright (C) 2006-2007 Imre Kaloz <kaloz at openwrt.org>
++ * Copyright (C) 2006-2009 Felix Fietkau <nbd at nbd.name>
++ * Copyright (C) 2012 Alexandros C. Couloumbis <alex at ozo.com>
++ *
++ * This code is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/slab.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/platform_device.h>
++#include <linux/sched.h>
++#include <linux/delay.h>
++#include <linux/io.h>
++#include <linux/mutex.h>
++
++#include "ar2315_spiflash.h"
++
++#define DRIVER_NAME "ar2315-spiflash"
++
++#define busy_wait(_priv, _condition, _wait) do { \
++ while (_condition) { \
++ if (_wait > 1) \
++ msleep(_wait); \
++ else if ((_wait == 1) && need_resched()) \
++ schedule(); \
++ else \
++ udelay(1); \
++ } \
++} while (0)
++
++enum {
++ FLASH_NONE,
++ FLASH_1MB,
++ FLASH_2MB,
++ FLASH_4MB,
++ FLASH_8MB,
++ FLASH_16MB,
++};
++
++/* Flash configuration table */
++struct flashconfig {
++ u32 byte_cnt;
++ u32 sector_cnt;
++ u32 sector_size;
++};
++
++static const struct flashconfig flashconfig_tbl[] = {
++ [FLASH_NONE] = { 0, 0, 0},
++ [FLASH_1MB] = { STM_1MB_BYTE_COUNT, STM_1MB_SECTOR_COUNT,
++ STM_1MB_SECTOR_SIZE},
++ [FLASH_2MB] = { STM_2MB_BYTE_COUNT, STM_2MB_SECTOR_COUNT,
++ STM_2MB_SECTOR_SIZE},
++ [FLASH_4MB] = { STM_4MB_BYTE_COUNT, STM_4MB_SECTOR_COUNT,
++ STM_4MB_SECTOR_SIZE},
++ [FLASH_8MB] = { STM_8MB_BYTE_COUNT, STM_8MB_SECTOR_COUNT,
++ STM_8MB_SECTOR_SIZE},
++ [FLASH_16MB] = { STM_16MB_BYTE_COUNT, STM_16MB_SECTOR_COUNT,
++ STM_16MB_SECTOR_SIZE}
++};
++
++/* Mapping of generic opcodes to STM serial flash opcodes */
++enum {
++ SPI_WRITE_ENABLE,
++ SPI_WRITE_DISABLE,
++ SPI_RD_STATUS,
++ SPI_WR_STATUS,
++ SPI_RD_DATA,
++ SPI_FAST_RD_DATA,
++ SPI_PAGE_PROGRAM,
++ SPI_SECTOR_ERASE,
++ SPI_BULK_ERASE,
++ SPI_DEEP_PWRDOWN,
++ SPI_RD_SIG,
++};
++
++struct opcodes {
++ __u16 code;
++ __s8 tx_cnt;
++ __s8 rx_cnt;
++};
++
++static const struct opcodes stm_opcodes[] = {
++ [SPI_WRITE_ENABLE] = {STM_OP_WR_ENABLE, 1, 0},
++ [SPI_WRITE_DISABLE] = {STM_OP_WR_DISABLE, 1, 0},
++ [SPI_RD_STATUS] = {STM_OP_RD_STATUS, 1, 1},
++ [SPI_WR_STATUS] = {STM_OP_WR_STATUS, 1, 0},
++ [SPI_RD_DATA] = {STM_OP_RD_DATA, 4, 4},
++ [SPI_FAST_RD_DATA] = {STM_OP_FAST_RD_DATA, 5, 0},
++ [SPI_PAGE_PROGRAM] = {STM_OP_PAGE_PGRM, 8, 0},
++ [SPI_SECTOR_ERASE] = {STM_OP_SECTOR_ERASE, 4, 0},
++ [SPI_BULK_ERASE] = {STM_OP_BULK_ERASE, 1, 0},
++ [SPI_DEEP_PWRDOWN] = {STM_OP_DEEP_PWRDOWN, 1, 0},
++ [SPI_RD_SIG] = {STM_OP_RD_SIG, 4, 1},
++};
++
++/* Driver private data structure */
++struct spiflash_priv {
++ struct mtd_info mtd;
++ void __iomem *readaddr; /* memory mapped data for read */
++ void __iomem *mmraddr; /* memory mapped register space */
++ struct mutex lock; /* serialize registers access */
++};
++
++#define to_spiflash(_mtd) container_of(_mtd, struct spiflash_priv, mtd)
++
++enum {
++ FL_READY,
++ FL_READING,
++ FL_ERASING,
++ FL_WRITING
++};
++
++/*****************************************************************************/
++
++static u32
++spiflash_read_reg(struct spiflash_priv *priv, int reg)
++{
++ return ioread32(priv->mmraddr + reg);
++}
++
++static void
++spiflash_write_reg(struct spiflash_priv *priv, int reg, u32 data)
++{
++ iowrite32(data, priv->mmraddr + reg);
++}
++
++static u32
++spiflash_wait_busy(struct spiflash_priv *priv)
++{
++ u32 reg;
++
++ busy_wait(priv, (reg = spiflash_read_reg(priv, SPI_FLASH_CTL)) &
++ SPI_CTL_BUSY, 0);
++ return reg;
++}
++
++static u32
++spiflash_sendcmd(struct spiflash_priv *priv, int opcode, u32 addr)
++{
++ const struct opcodes *op;
++ u32 reg, mask;
++
++ op = &stm_opcodes[opcode];
++ reg = spiflash_wait_busy(priv);
++ spiflash_write_reg(priv, SPI_FLASH_OPCODE,
++ ((u32)op->code) | (addr << 8));
++
++ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
++ reg |= SPI_CTL_START | op->tx_cnt | (op->rx_cnt << 4);
++
++ spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
++ spiflash_wait_busy(priv);
++
++ if (!op->rx_cnt)
++ return 0;
++
++ reg = spiflash_read_reg(priv, SPI_FLASH_DATA);
++
++ switch (op->rx_cnt) {
++ case 1:
++ mask = 0x000000ff;
++ break;
++ case 2:
++ mask = 0x0000ffff;
++ break;
++ case 3:
++ mask = 0x00ffffff;
++ break;
++ default:
++ mask = 0xffffffff;
++ break;
++ }
++ reg &= mask;
++
++ return reg;
++}
++
++/*
++ * Probe SPI flash device
++ * Function returns 0 for failure.
++ * and flashconfig_tbl array index for success.
++ */
++static int
++spiflash_probe_chip(struct platform_device *pdev, struct spiflash_priv *priv)
++{
++ u32 sig = spiflash_sendcmd(priv, SPI_RD_SIG, 0);
++ int flash_size;
++
++ switch (sig) {
++ case STM_8MBIT_SIGNATURE:
++ flash_size = FLASH_1MB;
++ break;
++ case STM_16MBIT_SIGNATURE:
++ flash_size = FLASH_2MB;
++ break;
++ case STM_32MBIT_SIGNATURE:
++ flash_size = FLASH_4MB;
++ break;
++ case STM_64MBIT_SIGNATURE:
++ flash_size = FLASH_8MB;
++ break;
++ case STM_128MBIT_SIGNATURE:
++ flash_size = FLASH_16MB;
++ break;
++ default:
++ dev_warn(&pdev->dev, "read of flash device signature failed!\n");
++ return 0;
++ }
++
++ return flash_size;
++}
++
++static void
++spiflash_wait_complete(struct spiflash_priv *priv, unsigned int timeout)
++{
++ busy_wait(priv, spiflash_sendcmd(priv, SPI_RD_STATUS, 0) &
++ SPI_STATUS_WIP, timeout);
++}
++
++static int
++spiflash_erase(struct mtd_info *mtd, struct erase_info *instr)
++{
++ struct spiflash_priv *priv = to_spiflash(mtd);
++ const struct opcodes *op;
++ u32 temp, reg;
++
++ if (instr->addr + instr->len > mtd->size)
++ return -EINVAL;
++
++ mutex_lock(&priv->lock);
++
++ spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0);
++ reg = spiflash_wait_busy(priv);
++
++ op = &stm_opcodes[SPI_SECTOR_ERASE];
++ temp = ((u32)instr->addr << 8) | (u32)(op->code);
++ spiflash_write_reg(priv, SPI_FLASH_OPCODE, temp);
++
++ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
++ reg |= op->tx_cnt | SPI_CTL_START;
++ spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
++
++ spiflash_wait_complete(priv, 20);
++
++ mutex_unlock(&priv->lock);
++
++ instr->state = MTD_ERASE_DONE;
++ mtd_erase_callback(instr);
++
++ return 0;
++}
++
++static int
++spiflash_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
++ u_char *buf)
++{
++ struct spiflash_priv *priv = to_spiflash(mtd);
++
++ if (!len)
++ return 0;
++
++ if (from + len > mtd->size)
++ return -EINVAL;
++
++ *retlen = len;
++
++ mutex_lock(&priv->lock);
++
++ memcpy_fromio(buf, priv->readaddr + from, len);
++
++ mutex_unlock(&priv->lock);
++
++ return 0;
++}
++
++static int
++spiflash_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
++ const u8 *buf)
++{
++ struct spiflash_priv *priv = to_spiflash(mtd);
++ u32 opcode, bytes_left;
++
++ *retlen = 0;
++
++ if (!len)
++ return 0;
++
++ if (to + len > mtd->size)
++ return -EINVAL;
++
++ bytes_left = len;
++
++ do {
++ u32 read_len, reg, page_offset, spi_data = 0;
++
++ read_len = min(bytes_left, sizeof(u32));
++
++ /* 32-bit writes cannot span across a page boundary
++ * (256 bytes). This types of writes require two page
++ * program operations to handle it correctly. The STM part
++ * will write the overflow data to the beginning of the
++ * current page as opposed to the subsequent page.
++ */
++ page_offset = (to & (STM_PAGE_SIZE - 1)) + read_len;
++
++ if (page_offset > STM_PAGE_SIZE)
++ read_len -= (page_offset - STM_PAGE_SIZE);
++
++ mutex_lock(&priv->lock);
++
++ spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0);
++ spi_data = 0;
++ switch (read_len) {
++ case 4:
++ spi_data |= buf[3] << 24;
++ /* fall through */
++ case 3:
++ spi_data |= buf[2] << 16;
++ /* fall through */
++ case 2:
++ spi_data |= buf[1] << 8;
++ /* fall through */
++ case 1:
++ spi_data |= buf[0] & 0xff;
++ break;
++ default:
++ break;
++ }
++
++ spiflash_write_reg(priv, SPI_FLASH_DATA, spi_data);
++ opcode = stm_opcodes[SPI_PAGE_PROGRAM].code |
++ (to & 0x00ffffff) << 8;
++ spiflash_write_reg(priv, SPI_FLASH_OPCODE, opcode);
++
++ reg = spiflash_read_reg(priv, SPI_FLASH_CTL);
++ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
++ reg |= (read_len + 4) | SPI_CTL_START;
++ spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
++
++ spiflash_wait_complete(priv, 1);
++
++ mutex_unlock(&priv->lock);
++
++ bytes_left -= read_len;
++ to += read_len;
++ buf += read_len;
++
++ *retlen += read_len;
++ } while (bytes_left != 0);
++
++ return 0;
++}
++
++#if defined CONFIG_MTD_REDBOOT_PARTS || CONFIG_MTD_MYLOADER_PARTS
++static const char * const part_probe_types[] = {
++ "cmdlinepart", "RedBoot", "MyLoader", NULL
++};
++#endif
++
++static int
++spiflash_probe(struct platform_device *pdev)
++{
++ struct spiflash_priv *priv;
++ struct mtd_info *mtd;
++ struct resource *res;
++ int index;
++ int result = 0;
++
++ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
++ if (!priv)
++ return -ENOMEM;
++
++ mutex_init(&priv->lock);
++ mtd = &priv->mtd;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++ priv->mmraddr = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(priv->mmraddr)) {
++ dev_warn(&pdev->dev, "failed to map flash MMR\n");
++ return PTR_ERR(priv->mmraddr);
++ }
++
++ index = spiflash_probe_chip(pdev, priv);
++ if (!index) {
++ dev_warn(&pdev->dev, "found no flash device\n");
++ return -ENODEV;
++ }
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ priv->readaddr = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(priv->readaddr)) {
++ dev_warn(&pdev->dev, "failed to map flash read mem\n");
++ return PTR_ERR(priv->readaddr);
++ }
++
++ platform_set_drvdata(pdev, priv);
++ mtd->name = "spiflash";
++ mtd->type = MTD_NORFLASH;
++ mtd->flags = (MTD_CAP_NORFLASH|MTD_WRITEABLE);
++ mtd->size = flashconfig_tbl[index].byte_cnt;
++ mtd->erasesize = flashconfig_tbl[index].sector_size;
++ mtd->writesize = 1;
++ mtd->numeraseregions = 0;
++ mtd->eraseregions = NULL;
++ mtd->_erase = spiflash_erase;
++ mtd->_read = spiflash_read;
++ mtd->_write = spiflash_write;
++ mtd->owner = THIS_MODULE;
++
++ dev_info(&pdev->dev, "%lld Kbytes flash detected\n", mtd->size >> 10);
++
++#if defined CONFIG_MTD_REDBOOT_PARTS || CONFIG_MTD_MYLOADER_PARTS
++ /* parse redboot partitions */
++
++ result = mtd_device_parse_register(mtd, part_probe_types,
++ NULL, NULL, 0);
++#endif
++
++ return result;
++}
++
++static int
++spiflash_remove(struct platform_device *pdev)
++{
++ struct spiflash_priv *priv = platform_get_drvdata(pdev);
++
++ mtd_device_unregister(&priv->mtd);
++
++ return 0;
++}
++
++static struct platform_driver spiflash_driver = {
++ .driver.name = DRIVER_NAME,
++ .probe = spiflash_probe,
++ .remove = spiflash_remove,
++};
++
++module_platform_driver(spiflash_driver);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("OpenWrt.org");
++MODULE_AUTHOR("Atheros Communications Inc");
++MODULE_DESCRIPTION("MTD driver for SPI Flash on Atheros AR2315+ SOC");
++MODULE_ALIAS("platform:" DRIVER_NAME);
++
+--- /dev/null
++++ b/drivers/mtd/devices/ar2315_spiflash.h
+@@ -0,0 +1,106 @@
++/*
++ * Atheros AR2315 SPI Flash Memory support header file.
++ *
++ * Copyright (c) 2005, Atheros Communications Inc.
++ * Copyright (C) 2006 FON Technology, SL.
++ * Copyright (C) 2006 Imre Kaloz <kaloz at openwrt.org>
++ * Copyright (C) 2006-2009 Felix Fietkau <nbd at nbd.name>
++ *
++ * This code is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++#ifndef __AR2315_SPIFLASH_H
++#define __AR2315_SPIFLASH_H
++
++#define STM_PAGE_SIZE 256
++
++#define SFI_WRITE_BUFFER_SIZE 4
++#define SFI_FLASH_ADDR_MASK 0x00ffffff
++
++#define STM_8MBIT_SIGNATURE 0x13
++#define STM_M25P80_BYTE_COUNT 1048576
++#define STM_M25P80_SECTOR_COUNT 16
++#define STM_M25P80_SECTOR_SIZE 0x10000
++
++#define STM_16MBIT_SIGNATURE 0x14
++#define STM_M25P16_BYTE_COUNT 2097152
++#define STM_M25P16_SECTOR_COUNT 32
++#define STM_M25P16_SECTOR_SIZE 0x10000
++
++#define STM_32MBIT_SIGNATURE 0x15
++#define STM_M25P32_BYTE_COUNT 4194304
++#define STM_M25P32_SECTOR_COUNT 64
++#define STM_M25P32_SECTOR_SIZE 0x10000
++
++#define STM_64MBIT_SIGNATURE 0x16
++#define STM_M25P64_BYTE_COUNT 8388608
++#define STM_M25P64_SECTOR_COUNT 128
++#define STM_M25P64_SECTOR_SIZE 0x10000
++
++#define STM_128MBIT_SIGNATURE 0x17
++#define STM_M25P128_BYTE_COUNT 16777216
++#define STM_M25P128_SECTOR_COUNT 256
++#define STM_M25P128_SECTOR_SIZE 0x10000
++
++#define STM_1MB_BYTE_COUNT STM_M25P80_BYTE_COUNT
++#define STM_1MB_SECTOR_COUNT STM_M25P80_SECTOR_COUNT
++#define STM_1MB_SECTOR_SIZE STM_M25P80_SECTOR_SIZE
++#define STM_2MB_BYTE_COUNT STM_M25P16_BYTE_COUNT
++#define STM_2MB_SECTOR_COUNT STM_M25P16_SECTOR_COUNT
++#define STM_2MB_SECTOR_SIZE STM_M25P16_SECTOR_SIZE
++#define STM_4MB_BYTE_COUNT STM_M25P32_BYTE_COUNT
++#define STM_4MB_SECTOR_COUNT STM_M25P32_SECTOR_COUNT
++#define STM_4MB_SECTOR_SIZE STM_M25P32_SECTOR_SIZE
++#define STM_8MB_BYTE_COUNT STM_M25P64_BYTE_COUNT
++#define STM_8MB_SECTOR_COUNT STM_M25P64_SECTOR_COUNT
++#define STM_8MB_SECTOR_SIZE STM_M25P64_SECTOR_SIZE
++#define STM_16MB_BYTE_COUNT STM_M25P128_BYTE_COUNT
++#define STM_16MB_SECTOR_COUNT STM_M25P128_SECTOR_COUNT
++#define STM_16MB_SECTOR_SIZE STM_M25P128_SECTOR_SIZE
++
++/*
++ * ST Microelectronics Opcodes for Serial Flash
++ */
++
++#define STM_OP_WR_ENABLE 0x06 /* Write Enable */
++#define STM_OP_WR_DISABLE 0x04 /* Write Disable */
++#define STM_OP_RD_STATUS 0x05 /* Read Status */
++#define STM_OP_WR_STATUS 0x01 /* Write Status */
++#define STM_OP_RD_DATA 0x03 /* Read Data */
++#define STM_OP_FAST_RD_DATA 0x0b /* Fast Read Data */
++#define STM_OP_PAGE_PGRM 0x02 /* Page Program */
++#define STM_OP_SECTOR_ERASE 0xd8 /* Sector Erase */
++#define STM_OP_BULK_ERASE 0xc7 /* Bulk Erase */
++#define STM_OP_DEEP_PWRDOWN 0xb9 /* Deep Power-Down Mode */
++#define STM_OP_RD_SIG 0xab /* Read Electronic Signature */
++
++#define STM_STATUS_WIP 0x01 /* Write-In-Progress */
++#define STM_STATUS_WEL 0x02 /* Write Enable Latch */
++#define STM_STATUS_BP0 0x04 /* Block Protect 0 */
++#define STM_STATUS_BP1 0x08 /* Block Protect 1 */
++#define STM_STATUS_BP2 0x10 /* Block Protect 2 */
++#define STM_STATUS_SRWD 0x80 /* Status Register Write Disable */
++
++/*
++ * SPI Flash Interface Registers
++ */
++
++#define SPI_FLASH_CTL 0x00
++#define SPI_FLASH_OPCODE 0x04
++#define SPI_FLASH_DATA 0x08
++
++#define SPI_CTL_START 0x00000100
++#define SPI_CTL_BUSY 0x00010000
++#define SPI_CTL_TXCNT_MASK 0x0000000f
++#define SPI_CTL_RXCNT_MASK 0x000000f0
++#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff
++#define SPI_CTL_SIZE_MASK 0x00060000
++
++#define SPI_CTL_CLK_SEL_MASK 0x03000000
++#define SPI_OPCODE_MASK 0x000000ff
++
++#define SPI_STATUS_WIP STM_STATUS_WIP
++
++#endif
+--- a/arch/mips/ath25/ar2315.c
++++ b/arch/mips/ath25/ar2315.c
+@@ -220,6 +220,28 @@ static struct platform_device ar2315_gpi
+ .num_resources = ARRAY_SIZE(ar2315_gpio_res)
+ };
+
++static struct resource ar2315_spiflash_res[] = {
++ {
++ .name = "spiflash_read",
++ .flags = IORESOURCE_MEM,
++ .start = AR2315_SPI_READ_BASE,
++ .end = AR2315_SPI_READ_BASE + AR2315_SPI_READ_SIZE - 1,
++ },
++ {
++ .name = "spiflash_mmr",
++ .flags = IORESOURCE_MEM,
++ .start = AR2315_SPI_MMR_BASE,
++ .end = AR2315_SPI_MMR_BASE + AR2315_SPI_MMR_SIZE - 1,
++ },
++};
++
++static struct platform_device ar2315_spiflash = {
++ .id = 0,
++ .name = "ar2315-spiflash",
++ .resource = ar2315_spiflash_res,
++ .num_resources = ARRAY_SIZE(ar2315_spiflash_res)
++};
++
+ void __init ar2315_init_devices(void)
+ {
+ /* Find board configuration */
+@@ -230,6 +252,8 @@ void __init ar2315_init_devices(void)
+ ar2315_gpio_res[1].end = ar2315_gpio_res[1].start;
+ platform_device_register(&ar2315_gpio);
+
++ platform_device_register(&ar2315_spiflash);
++
+ ar2315_eth_data.macaddr = ath25_board.config->enet0_mac;
+ ath25_add_ethernet(0, AR2315_ENET0_BASE, "eth0_mii",
+ AR2315_ENET0_MII_BASE, AR2315_IRQ_ENET0,
diff --git a/target/linux/ath25/patches-5.4/130-watchdog.patch b/target/linux/ath25/patches-5.4/130-watchdog.patch
new file mode 100644
index 0000000000..01904d69a5
--- /dev/null
+++ b/target/linux/ath25/patches-5.4/130-watchdog.patch
@@ -0,0 +1,277 @@
+--- /dev/null
++++ b/drivers/watchdog/ar2315-wtd.c
+@@ -0,0 +1,209 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, see <http://www.gnu.org/licenses/>.
++ *
++ * Copyright (C) 2008 John Crispin <blogic at openwrt.org>
++ * Based on EP93xx and ifxmips wdt driver
++ */
++
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/types.h>
++#include <linux/miscdevice.h>
++#include <linux/watchdog.h>
++#include <linux/fs.h>
++#include <linux/ioport.h>
++#include <linux/notifier.h>
++#include <linux/reboot.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/uaccess.h>
++
++#define DRIVER_NAME "ar2315-wdt"
++
++#define CLOCK_RATE 40000000
++#define HEARTBEAT(x) (x < 1 || x > 90 ? 20 : x)
++
++#define WDT_REG_TIMER 0x00
++#define WDT_REG_CTRL 0x04
++
++#define WDT_CTRL_ACT_NONE 0x00000000 /* No action */
++#define WDT_CTRL_ACT_NMI 0x00000001 /* NMI on watchdog */
++#define WDT_CTRL_ACT_RESET 0x00000002 /* reset on watchdog */
++
++static int wdt_timeout = 20;
++static int started;
++static int in_use;
++static void __iomem *wdt_base;
++
++static inline void ar2315_wdt_wr(unsigned reg, u32 val)
++{
++ iowrite32(val, wdt_base + reg);
++}
++
++static void
++ar2315_wdt_enable(void)
++{
++ ar2315_wdt_wr(WDT_REG_TIMER, wdt_timeout * CLOCK_RATE);
++}
++
++static ssize_t
++ar2315_wdt_write(struct file *file, const char __user *data, size_t len,
++ loff_t *ppos)
++{
++ if (len)
++ ar2315_wdt_enable();
++ return len;
++}
++
++static int
++ar2315_wdt_open(struct inode *inode, struct file *file)
++{
++ if (in_use)
++ return -EBUSY;
++ ar2315_wdt_enable();
++ in_use = 1;
++ started = 1;
++ return nonseekable_open(inode, file);
++}
++
++static int
++ar2315_wdt_release(struct inode *inode, struct file *file)
++{
++ in_use = 0;
++ return 0;
++}
++
++static irqreturn_t
++ar2315_wdt_interrupt(int irq, void *dev)
++{
++ struct platform_device *pdev = (struct platform_device *)dev;
++
++ if (started) {
++ dev_crit(&pdev->dev, "watchdog expired, rebooting system\n");
++ emergency_restart();
++ } else {
++ ar2315_wdt_wr(WDT_REG_CTRL, 0);
++ ar2315_wdt_wr(WDT_REG_TIMER, 0);
++ }
++ return IRQ_HANDLED;
++}
++
++static struct watchdog_info ident = {
++ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
++ .identity = "ar2315 Watchdog",
++};
++
++static long
++ar2315_wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
++{
++ int new_wdt_timeout;
++ int ret = -ENOIOCTLCMD;
++
++ switch (cmd) {
++ case WDIOC_GETSUPPORT:
++ ret = copy_to_user((void __user *)arg, &ident, sizeof(ident)) ?
++ -EFAULT : 0;
++ break;
++ case WDIOC_KEEPALIVE:
++ ar2315_wdt_enable();
++ ret = 0;
++ break;
++ case WDIOC_SETTIMEOUT:
++ ret = get_user(new_wdt_timeout, (int __user *)arg);
++ if (ret)
++ break;
++ wdt_timeout = HEARTBEAT(new_wdt_timeout);
++ ar2315_wdt_enable();
++ break;
++ case WDIOC_GETTIMEOUT:
++ ret = put_user(wdt_timeout, (int __user *)arg);
++ break;
++ }
++ return ret;
++}
++
++static const struct file_operations ar2315_wdt_fops = {
++ .owner = THIS_MODULE,
++ .llseek = no_llseek,
++ .write = ar2315_wdt_write,
++ .unlocked_ioctl = ar2315_wdt_ioctl,
++ .open = ar2315_wdt_open,
++ .release = ar2315_wdt_release,
++};
++
++static struct miscdevice ar2315_wdt_miscdev = {
++ .minor = WATCHDOG_MINOR,
++ .name = "watchdog",
++ .fops = &ar2315_wdt_fops,
++};
++
++static int
++ar2315_wdt_probe(struct platform_device *dev)
++{
++ struct resource *mem_res, *irq_res;
++ int ret = 0;
++
++ if (wdt_base)
++ return -EBUSY;
++
++ irq_res = platform_get_resource(dev, IORESOURCE_IRQ, 0);
++ if (!irq_res) {
++ dev_err(&dev->dev, "no IRQ resource\n");
++ return -ENOENT;
++ }
++
++ mem_res = platform_get_resource(dev, IORESOURCE_MEM, 0);
++ wdt_base = devm_ioremap_resource(&dev->dev, mem_res);
++ if (IS_ERR(wdt_base))
++ return PTR_ERR(wdt_base);
++
++ ret = devm_request_irq(&dev->dev, irq_res->start, ar2315_wdt_interrupt,
++ 0, DRIVER_NAME, dev);
++ if (ret) {
++ dev_err(&dev->dev, "failed to register inetrrupt\n");
++ goto out;
++ }
++
++ ret = misc_register(&ar2315_wdt_miscdev);
++ if (ret)
++ dev_err(&dev->dev, "failed to register miscdev\n");
++
++out:
++ return ret;
++}
++
++static int
++ar2315_wdt_remove(struct platform_device *dev)
++{
++ misc_deregister(&ar2315_wdt_miscdev);
++ return 0;
++}
++
++static struct platform_driver ar2315_wdt_driver = {
++ .probe = ar2315_wdt_probe,
++ .remove = ar2315_wdt_remove,
++ .driver = {
++ .name = DRIVER_NAME,
++ .owner = THIS_MODULE,
++ },
++};
++
++module_platform_driver(ar2315_wdt_driver);
++
++MODULE_DESCRIPTION("Atheros AR2315 hardware watchdog driver");
++MODULE_AUTHOR("John Crispin <blogic at openwrt.org>");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:" DRIVER_NAME);
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -1647,6 +1647,13 @@ config PIC32_DMT
+ To compile this driver as a loadable module, choose M here.
+ The module will be called pic32-dmt.
+
++config AR2315_WDT
++ tristate "Atheros AR2315+ WiSoCs Watchdog Timer"
++ depends on ATH25
++ help
++ Hardware driver for the built-in watchdog timer on the Atheros
++ AR2315/AR2316 WiSoCs.
++
+ # PARISC Architecture
+
+ # POWERPC Architecture
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -166,6 +166,7 @@ obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
+ obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
+ obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
+ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
++obj-$(CONFIG_AR2315_WDT) += ar2315-wtd.o
+ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
+ obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
+ octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
+--- a/arch/mips/ath25/ar2315.c
++++ b/arch/mips/ath25/ar2315.c
+@@ -220,6 +220,24 @@ static struct platform_device ar2315_gpi
+ .num_resources = ARRAY_SIZE(ar2315_gpio_res)
+ };
+
++static struct resource ar2315_wdt_res[] = {
++ {
++ .flags = IORESOURCE_MEM,
++ .start = AR2315_RST_BASE + AR2315_WDT_TIMER,
++ .end = AR2315_RST_BASE + AR2315_WDT_TIMER + 8 - 1,
++ },
++ {
++ .flags = IORESOURCE_IRQ,
++ }
++};
++
++static struct platform_device ar2315_wdt = {
++ .id = 0,
++ .name = "ar2315-wdt",
++ .resource = ar2315_wdt_res,
++ .num_resources = ARRAY_SIZE(ar2315_wdt_res)
++};
++
+ static struct resource ar2315_spiflash_res[] = {
+ {
+ .name = "spiflash_read",
+@@ -252,6 +270,11 @@ void __init ar2315_init_devices(void)
+ ar2315_gpio_res[1].end = ar2315_gpio_res[1].start;
+ platform_device_register(&ar2315_gpio);
+
++ ar2315_wdt_res[1].start = irq_create_mapping(ar2315_misc_irq_domain,
++ AR2315_MISC_IRQ_WATCHDOG);
++ ar2315_wdt_res[1].end = ar2315_wdt_res[1].start;
++ platform_device_register(&ar2315_wdt);
++
+ platform_device_register(&ar2315_spiflash);
+
+ ar2315_eth_data.macaddr = ath25_board.config->enet0_mac;
diff --git a/target/linux/ath25/patches-5.4/140-redboot_boardconfig.patch b/target/linux/ath25/patches-5.4/140-redboot_boardconfig.patch
new file mode 100644
index 0000000000..6aad761cb1
--- /dev/null
+++ b/target/linux/ath25/patches-5.4/140-redboot_boardconfig.patch
@@ -0,0 +1,60 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -30,6 +30,8 @@
+ #include <linux/mtd/partitions.h>
+ #include <linux/module.h>
+
++#define BOARD_CONFIG_PART "boardconfig"
++
+ struct fis_image_desc {
+ unsigned char name[16]; // Null terminated name
+ uint32_t flash_base; // Address within FLASH of image
+@@ -60,6 +62,7 @@ static int parse_redboot_partitions(stru
+ const struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
+ {
++ unsigned long max_offset = 0;
+ int nrparts = 0;
+ struct fis_image_desc *buf;
+ struct mtd_partition *parts;
+@@ -225,14 +228,15 @@ static int parse_redboot_partitions(stru
+ }
+ }
+ #endif
+- parts = kzalloc(sizeof(*parts)*nrparts + nulllen + namelen, GFP_KERNEL);
++ parts = kzalloc(sizeof(*parts) * (nrparts + 1) + nulllen + namelen +
++ sizeof(BOARD_CONFIG_PART), GFP_KERNEL);
+
+ if (!parts) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+- nullname = (char *)&parts[nrparts];
++ nullname = (char *)&parts[nrparts + 1];
+ #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+ if (nulllen > 0) {
+ strcpy(nullname, nullstring);
+@@ -251,6 +255,8 @@ static int parse_redboot_partitions(stru
+ }
+ #endif
+ for ( ; i<nrparts; i++) {
++ if (max_offset < buf[i].flash_base + buf[i].size)
++ max_offset = buf[i].flash_base + buf[i].size;
+ parts[i].size = fl->img->size;
+ parts[i].offset = fl->img->flash_base;
+ parts[i].name = names;
+@@ -284,6 +290,13 @@ static int parse_redboot_partitions(stru
+ fl = fl->next;
+ kfree(tmp_fl);
+ }
++ if (master->size - max_offset >= master->erasesize) {
++ parts[nrparts].size = master->size - max_offset;
++ parts[nrparts].offset = max_offset;
++ parts[nrparts].name = names;
++ strcpy(names, BOARD_CONFIG_PART);
++ nrparts++;
++ }
+ ret = nrparts;
+ *pparts = parts;
+ out:
diff --git a/target/linux/ath25/patches-5.4/141-redboot_partition_scan.patch b/target/linux/ath25/patches-5.4/141-redboot_partition_scan.patch
new file mode 100644
index 0000000000..d1d281eaf4
--- /dev/null
+++ b/target/linux/ath25/patches-5.4/141-redboot_partition_scan.patch
@@ -0,0 +1,44 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -79,12 +79,18 @@ static int parse_redboot_partitions(stru
+ static char nullstring[] = "unallocated";
+ #endif
+
++ buf = vmalloc(master->erasesize);
++ if (!buf)
++ return -ENOMEM;
++
++ restart:
+ if ( directory < 0 ) {
+ offset = master->size + directory * master->erasesize;
+ while (mtd_block_isbad(master, offset)) {
+ if (!offset) {
+ nogood:
+ printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
++ vfree(buf);
+ return -EIO;
+ }
+ offset -= master->erasesize;
+@@ -97,10 +103,6 @@ static int parse_redboot_partitions(stru
+ goto nogood;
+ }
+ }
+- buf = vmalloc(master->erasesize);
+-
+- if (!buf)
+- return -ENOMEM;
+
+ printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
+ master->name, offset);
+@@ -173,6 +175,11 @@ static int parse_redboot_partitions(stru
+ }
+ if (i == numslots) {
+ /* Didn't find it */
++ if (offset + master->erasesize < master->size) {
++ /* not at the end of the flash yet, maybe next block */
++ directory++;
++ goto restart;
++ }
+ printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
+ master->name);
+ ret = 0;
diff --git a/target/linux/ath25/patches-5.4/142-redboot_various_erase_size_fix.patch b/target/linux/ath25/patches-5.4/142-redboot_various_erase_size_fix.patch
new file mode 100644
index 0000000000..ce039df9f1
--- /dev/null
+++ b/target/linux/ath25/patches-5.4/142-redboot_various_erase_size_fix.patch
@@ -0,0 +1,72 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -58,6 +58,22 @@ static inline int redboot_checksum(struc
+ return 1;
+ }
+
++static uint32_t mtd_get_offset_erasesize(struct mtd_info *mtd, uint64_t offset)
++{
++ struct mtd_erase_region_info *regions = mtd->eraseregions;
++ int i;
++
++ for (i = 0; i < mtd->numeraseregions; i++) {
++ if (regions[i].offset +
++ regions[i].numblocks * regions[i].erasesize <= offset)
++ continue;
++
++ return regions[i].erasesize;
++ }
++
++ return mtd->erasesize;
++}
++
+ static int parse_redboot_partitions(struct mtd_info *master,
+ const struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
+@@ -74,6 +90,7 @@ static int parse_redboot_partitions(stru
+ int namelen = 0;
+ int nulllen = 0;
+ int numslots;
++ int first_slot;
+ unsigned long offset;
+ #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+ static char nullstring[] = "unallocated";
+@@ -186,7 +203,10 @@ static int parse_redboot_partitions(stru
+ goto out;
+ }
+
+- for (i = 0; i < numslots; i++) {
++ first_slot = (buf[i].flash_base & (master->erasesize - 1)) /
++ sizeof(struct fis_image_desc);
++
++ for (i = first_slot; i < first_slot + numslots; i++) {
+ struct fis_list *new_fl, **prev;
+
+ if (buf[i].name[0] == 0xff) {
+@@ -262,12 +282,13 @@ static int parse_redboot_partitions(stru
+ }
+ #endif
+ for ( ; i<nrparts; i++) {
+- if (max_offset < buf[i].flash_base + buf[i].size)
+- max_offset = buf[i].flash_base + buf[i].size;
+ parts[i].size = fl->img->size;
+ parts[i].offset = fl->img->flash_base;
+ parts[i].name = names;
+
++ if (max_offset < parts[i].offset + parts[i].size)
++ max_offset = parts[i].offset + parts[i].size;
++
+ strcpy(names, fl->img->name);
+ #ifdef CONFIG_MTD_REDBOOT_PARTS_READONLY
+ if (!memcmp(names, "RedBoot", 8) ||
+@@ -297,7 +318,9 @@ static int parse_redboot_partitions(stru
+ fl = fl->next;
+ kfree(tmp_fl);
+ }
+- if (master->size - max_offset >= master->erasesize) {
++
++ if (master->size - max_offset >=
++ mtd_get_offset_erasesize(master, max_offset)) {
+ parts[nrparts].size = master->size - max_offset;
+ parts[nrparts].offset = max_offset;
+ parts[nrparts].name = names;
diff --git a/target/linux/ath25/patches-5.4/210-reset_button.patch b/target/linux/ath25/patches-5.4/210-reset_button.patch
new file mode 100644
index 0000000000..b3f7a14cda
--- /dev/null
+++ b/target/linux/ath25/patches-5.4/210-reset_button.patch
@@ -0,0 +1,71 @@
+--- a/arch/mips/ath25/Makefile
++++ b/arch/mips/ath25/Makefile
+@@ -8,7 +8,7 @@
+ # Copyright (C) 2006-2009 Felix Fietkau <nbd at openwrt.org>
+ #
+
+-obj-y += board.o prom.o devices.o
++obj-y += board.o prom.o devices.o reset.o
+
+ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
+--- /dev/null
++++ b/arch/mips/ath25/reset.c
+@@ -0,0 +1,57 @@
++#include <linux/init.h>
++#include <linux/slab.h>
++#include <linux/platform_device.h>
++#include <linux/gpio_keys.h>
++#include <linux/input.h>
++#include <ath25_platform.h>
++#include "devices.h"
++
++static int __init
++ar231x_init_reset(void)
++{
++ struct platform_device *pdev;
++ struct gpio_keys_platform_data pdata;
++ struct gpio_keys_button *p;
++ int err;
++
++ if (ath25_board.config->reset_config_gpio == 0xffff)
++ return -ENODEV;
++
++ p = kzalloc(sizeof(*p), GFP_KERNEL);
++ if (!p)
++ goto err;
++
++ p->desc = "reset";
++ p->type = EV_KEY;
++ p->code = KEY_RESTART;
++ p->debounce_interval = 60;
++ p->gpio = ath25_board.config->reset_config_gpio;
++
++ memset(&pdata, 0, sizeof(pdata));
++ pdata.poll_interval = 20;
++ pdata.buttons = p;
++ pdata.nbuttons = 1;
++
++ pdev = platform_device_alloc("gpio-keys-polled", 0);
++ if (!pdev)
++ goto err_free;
++
++ err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
++ if (err)
++ goto err_put_pdev;
++
++ err = platform_device_add(pdev);
++ if (err)
++ goto err_put_pdev;
++
++ return 0;
++
++err_put_pdev:
++ platform_device_put(pdev);
++err_free:
++ kfree(p);
++err:
++ return -ENOMEM;
++}
++
++device_initcall(ar231x_init_reset);
diff --git a/target/linux/ath25/patches-5.4/220-enet_micrel_workaround.patch b/target/linux/ath25/patches-5.4/220-enet_micrel_workaround.patch
new file mode 100644
index 0000000000..91b9792515
--- /dev/null
+++ b/target/linux/ath25/patches-5.4/220-enet_micrel_workaround.patch
@@ -0,0 +1,111 @@
+--- a/drivers/net/ethernet/atheros/ar231x/ar231x.c
++++ b/drivers/net/ethernet/atheros/ar231x/ar231x.c
+@@ -135,6 +135,7 @@ static int ar231x_mdiobus_write(struct m
+ static int ar231x_mdiobus_reset(struct mii_bus *bus);
+ static int ar231x_mdiobus_probe(struct net_device *dev);
+ static void ar231x_adjust_link(struct net_device *dev);
++static bool no_phy;
+
+ #ifndef ERR
+ #define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
+@@ -167,6 +168,32 @@ static const struct net_device_ops ar231
+ #endif
+ };
+
++static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id)
++{
++ int phy_reg;
++
++ /**
++ * Grab the bits from PHYIR1, and put them
++ * in the upper half.
++ */
++ phy_reg = mdiobus_read(bus, addr, MII_PHYSID1);
++
++ if (phy_reg < 0)
++ return -EIO;
++
++ *phy_id = (phy_reg & 0xffff) << 16;
++
++ /* Grab the bits from PHYIR2, and put them in the lower half */
++ phy_reg = mdiobus_read(bus, addr, MII_PHYSID2);
++
++ if (phy_reg < 0)
++ return -EIO;
++
++ *phy_id |= (phy_reg & 0xffff);
++
++ return 0;
++}
++
+ static int ar231x_probe(struct platform_device *pdev)
+ {
+ struct net_device *dev;
+@@ -273,6 +300,24 @@ static int ar231x_probe(struct platform_
+
+ mdiobus_register(sp->mii_bus);
+
++ /**
++ * Workaround for Micrel switch, which is only available on
++ * one PHY and cannot be configured through MDIO.
++ */
++ if (!no_phy) {
++ u32 phy_id = 0;
++
++ get_phy_id(sp->mii_bus, 1, &phy_id);
++ if (phy_id == 0x00221450)
++ no_phy = true;
++ }
++ if (no_phy) {
++ sp->link = 1;
++ netif_carrier_on(dev);
++ return 0;
++ }
++ no_phy = true;
++
+ if (ar231x_mdiobus_probe(dev) != 0) {
+ printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name);
+ rx_tasklet_cleanup(dev);
+@@ -326,8 +371,10 @@ static int ar231x_remove(struct platform
+ rx_tasklet_cleanup(dev);
+ ar231x_init_cleanup(dev);
+ unregister_netdev(dev);
+- mdiobus_unregister(sp->mii_bus);
+- mdiobus_free(sp->mii_bus);
++ if (sp->mii_bus) {
++ mdiobus_unregister(sp->mii_bus);
++ mdiobus_free(sp->mii_bus);
++ }
+ kfree(dev);
+ return 0;
+ }
+@@ -870,7 +917,8 @@ static int ar231x_open(struct net_device
+
+ sp->eth_regs->mac_control |= MAC_CONTROL_RE;
+
+- phy_start(sp->phy_dev);
++ if (sp->phy_dev)
++ phy_start(sp->phy_dev);
+
+ return 0;
+ }
+@@ -951,7 +999,8 @@ static int ar231x_close(struct net_devic
+
+ #endif
+
+- phy_stop(sp->phy_dev);
++ if (sp->phy_dev)
++ phy_stop(sp->phy_dev);
+
+ return 0;
+ }
+@@ -995,6 +1044,9 @@ static int ar231x_ioctl(struct net_devic
+ {
+ struct ar231x_private *sp = netdev_priv(dev);
+
++ if (!sp->phy_dev)
++ return -ENODEV;
++
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ case SIOCGMIIREG:
diff --git a/target/linux/ath25/patches-5.4/330-board_leds.patch b/target/linux/ath25/patches-5.4/330-board_leds.patch
new file mode 100644
index 0000000000..e357fc6a64
--- /dev/null
+++ b/target/linux/ath25/patches-5.4/330-board_leds.patch
@@ -0,0 +1,116 @@
+--- a/arch/mips/ath25/ar2315.c
++++ b/arch/mips/ath25/ar2315.c
+@@ -23,6 +23,7 @@
+ #include <linux/reboot.h>
+ #include <linux/delay.h>
+ #include <linux/gpio.h>
++#include <linux/leds.h>
+ #include <asm/bootinfo.h>
+ #include <asm/reboot.h>
+ #include <asm/time.h>
+@@ -260,6 +261,50 @@ static struct platform_device ar2315_spi
+ .num_resources = ARRAY_SIZE(ar2315_spiflash_res)
+ };
+
++#ifdef CONFIG_LEDS_GPIO
++static struct gpio_led ar2315_leds[6];
++static struct gpio_led_platform_data ar2315_led_data = {
++ .leds = (void *)ar2315_leds,
++};
++
++static struct platform_device ar2315_gpio_leds = {
++ .name = "leds-gpio",
++ .id = -1,
++ .dev = {
++ .platform_data = (void *)&ar2315_led_data,
++ }
++};
++
++static void __init ar2315_init_gpio_leds(void)
++{
++ static char led_names[6][6];
++ int i, led = 0;
++
++ ar2315_led_data.num_leds = 0;
++ for (i = 1; i < 8; i++) {
++ if ((i == AR2315_RESET_GPIO) ||
++ (i == ath25_board.config->reset_config_gpio))
++ continue;
++
++ if (i == ath25_board.config->sys_led_gpio)
++ strcpy(led_names[led], "wlan");
++ else
++ sprintf(led_names[led], "gpio%d", i);
++
++ ar2315_leds[led].name = led_names[led];
++ ar2315_leds[led].gpio = i;
++ ar2315_leds[led].active_low = 0;
++ led++;
++ }
++ ar2315_led_data.num_leds = led;
++ platform_device_register(&ar2315_gpio_leds);
++}
++#else
++static inline void ar2315_init_gpio_leds(void)
++{
++}
++#endif
++
+ void __init ar2315_init_devices(void)
+ {
+ /* Find board configuration */
+@@ -270,6 +315,8 @@ void __init ar2315_init_devices(void)
+ ar2315_gpio_res[1].end = ar2315_gpio_res[1].start;
+ platform_device_register(&ar2315_gpio);
+
++ ar2315_init_gpio_leds();
++
+ ar2315_wdt_res[1].start = irq_create_mapping(ar2315_misc_irq_domain,
+ AR2315_MISC_IRQ_WATCHDOG);
+ ar2315_wdt_res[1].end = ar2315_wdt_res[1].start;
+--- a/arch/mips/ath25/ar5312.c
++++ b/arch/mips/ath25/ar5312.c
+@@ -23,6 +23,7 @@
+ #include <linux/mtd/physmap.h>
+ #include <linux/reboot.h>
+ #include <linux/gpio.h>
++#include <linux/leds.h>
+ #include <asm/bootinfo.h>
+ #include <asm/reboot.h>
+ #include <asm/time.h>
+@@ -231,6 +232,23 @@ static struct platform_device ar5312_gpi
+ .num_resources = ARRAY_SIZE(ar5312_gpio_res),
+ };
+
++#ifdef CONFIG_LEDS_GPIO
++static struct gpio_led ar5312_leds[] = {
++ { .name = "wlan", .gpio = 0, .active_low = 1, },
++};
++
++static const struct gpio_led_platform_data ar5312_led_data = {
++ .num_leds = ARRAY_SIZE(ar5312_leds),
++ .leds = (void *)ar5312_leds,
++};
++
++static struct platform_device ar5312_gpio_leds = {
++ .name = "leds-gpio",
++ .id = -1,
++ .dev.platform_data = (void *)&ar5312_led_data,
++};
++#endif
++
+ static void __init ar5312_flash_init(void)
+ {
+ void __iomem *flashctl_base;
+@@ -301,6 +319,11 @@ void __init ar5312_init_devices(void)
+
+ platform_device_register(&ar5312_gpio);
+
++#ifdef CONFIG_LEDS_GPIO
++ ar5312_leds[0].gpio = config->sys_led_gpio;
++ platform_device_register(&ar5312_gpio_leds);
++#endif
++
+ /* Fix up MAC addresses if necessary */
+ if (is_broadcast_ether_addr(config->enet0_mac))
+ ether_addr_copy(config->enet0_mac, config->enet1_mac);
diff --git a/target/linux/ath25/profiles/00-default.mk b/target/linux/ath25/profiles/00-default.mk
new file mode 100644
index 0000000000..b40eb1b0ce
--- /dev/null
+++ b/target/linux/ath25/profiles/00-default.mk
@@ -0,0 +1,16 @@
+#
+# Copyright (C) 2011 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Default
+ NAME:=Default Profile
+ PRIORITY:=1
+endef
+
+define Profile/Default/Description
+ Default package set compatible with most boards.
+endef
+$(eval $(call Profile,Default))
More information about the lede-commits
mailing list