[openwrt/openwrt] bcm63xx: reorganize board patches into fewer files
LEDE Commits
lede-commits at lists.infradead.org
Mon Oct 26 19:38:05 EDT 2020
adrian pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/c4ab1b7dd9d0194ef8e90847f0fb3e2bf23bfc67
commit c4ab1b7dd9d0194ef8e90847f0fb3e2bf23bfc67
Author: Adrian Schmutzler <freifunk at adrianschmutzler.de>
AuthorDate: Sun Oct 4 18:00:28 2020 +0200
bcm63xx: reorganize board patches into fewer files
At the moment, bcm63xx creates one patch for each board to add to
board_bcm963xx.c. While this is not really helpful to get an overview
in the first place, it is particularly painful if you want to change
something for an early file and have to refresh all the later patches
accordingly.
Since it does not look like these board patches are upstreamed either,
this commit consolidates all board additions into one patch per "board".
By this, both adding and editing boards should become much simpler,
and we drop about 1300 lines of "code" from patches as well.
Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
---
.../501-board_bcm6318-brcm-bcm96318ref.patch | 74 ---
...bcm6328-extend-96328avng-reference-board.patch} | 11 +-
....patch => 502-board-bcm6358-DWV-S0_fixes.patch} | 2 +-
.../502-board_bcm6318-brcm-bcm96318ref-p300.patch | 67 --
.../503-board_bcm6318-d-link-dsl-275xb-d.patch | 91 ---
.../504-board_bcm6318-sagem-fast-2704n.patch | 68 --
.../505-board_bcm6318-comtrend-ar-5315u.patch | 84 ---
.../bcm63xx/patches-5.4/511-board_bcm6318.patch | 292 ++++++++
.../bcm63xx/patches-5.4/512-board_bcm6328.patch | 521 +++++++++++++++
...ink-dsl-2640u.patch => 513-board-bcm6338.patch} | 21 +-
...770bw-rta770w.patch => 514-board_bcm6345.patch} | 2 +-
.../bcm63xx/patches-5.4/515-board-bcm6348.patch | 328 +++++++++
.../bcm63xx/patches-5.4/516-board-bcm6358.patch | 384 +++++++++++
.../bcm63xx/patches-5.4/517-board_bcm6362.patch | 144 ++++
.../bcm63xx/patches-5.4/518-board_bcm6368.patch | 732 +++++++++++++++++++++
.../bcm63xx/patches-5.4/519-board_bcm63268.patch | 307 +++++++++
...IPS-BCM63XX-add-963281TAN-reference-board.patch | 67 --
.../523-board_bcm6328-d-link-dsl-274xb-f.patch | 79 ---
.../524-board_bcm6328-adb-a4001n1.patch | 68 --
.../525-board_bcm6328-comtrend-ar-5387un.patch | 97 ---
.../526-board_bcm6328-comtrend-ar-5381u.patch | 79 ---
.../527-board_bcm6328-sagem-fast-2704-v2.patch | 73 --
.../patches-5.4/528-board_bcm6328-adb-a4001n.patch | 68 --
.../529-board_bcm6328-nucom-r5010un-v2.patch | 69 --
.../530-board_bcm6328-sercomm-ad1018.patch | 91 ---
...board-bcm6328-adb-pdg-a4001n-a-000-1a1-ax.patch | 68 --
...=> 531-board_bcm6348-bt-voyager-2500v-bb.patch} | 46 +-
...IPS-BCM63XX-add-inventel-Livebox-support.patch} | 0
.../542-board_bcm6338-dynalink-rta1320.patch | 38 --
.../patches-5.4/561-board-bcm6348-D4PW.patch | 40 --
.../562-board_bcm6348-t-com-speedport-w-500v.patch | 55 --
.../563-board_bcm6348-tecom-gw6000-gw6200.patch | 67 --
.../564-board-bcm6348-telsey-magic.patch | 49 --
.../566-board_bcm6348-bt-voyager-2110.patch | 41 --
...board_bcm6348-comtrend-ct-536plus-ct-5621.patch | 50 --
.../569-board_bcm6348-comtrend-ct-5365.patch | 48 --
.../570-board_bcm6348-telsey-cpva502plus.patch | 53 --
.../571-board_bcm6348-netgear-dg834g-v4.patch | 42 --
.../572-board_bcm6348-sagem-fast-2604.patch | 41 --
.../573-board_bcm6348-asmax-ar-1004g.patch | 48 --
.../602-board-bcm6358-sfr-neufbox-4.patch | 77 ---
.../603-board-bcm6358-telsey-cpva642.patch | 42 --
.../604-board_bcm6358-d-link-dsl-274xb-c.patch | 41 --
.../605-board_bcm6358-huawei-echolife-hg553.patch | 50 --
.../606-board_bcm6358-t-com-speedport-w-303v.patch | 39 --
.../607-board_bcm6358-comtrend-ct-6373.patch | 49 --
.../608-board_bcm6358-d-link-dva-g3810bn-tl.patch | 50 --
.../609-board_bcm6358-huawei-echolife-hg556.patch | 125 ----
.../610-board_bcm6359-huawei-echolife-hg520v.patch | 55 --
.../611-board_bcm6358-bt-home-hub-2-a.patch | 50 --
.../631-board_bcm6361-sfr-neufbox-6.patch | 52 --
.../632-board_bcm6362-sagem-fast-2504n.patch | 62 --
.../633-board-bcm6362-netgear-dgnd3700-v2.patch | 49 --
.../634-board-bcm6362-huawei-hg253s-v2.patch | 56 --
...1-bcm63xx-add-support-for-96368MVWG-board.patch | 111 ----
...-bcm63xx-add-support-for-96368MVNgr-board.patch | 69 --
.../653-board_bcm6369-comtrend-wap-5813n.patch | 75 ---
.../654-board_bcm6368-comtrend-vr-3025u.patch | 78 ---
.../655-board_bcm6368-comtrend-vr-3025un.patch | 78 ---
.../656-board_bcm6368-zyxel-p870hw-51a-v2.patch | 67 --
.../657-board_bcm6368-netgear-dgnd3700-v1.patch | 49 --
.../658-board_bcm6368-huawei-echolife-hg655b.patch | 71 --
.../659-board_bcm6368-comtrend-vr-3026e.patch | 78 ---
.../660-board_bcm6368-huawei-echolife-hg622.patch | 71 --
.../661-board_bcm6369-netgear-evg2000.patch | 62 --
.../662-board_bcm6368-adb-av4202n.patch | 68 --
.../663-board_bcm6368-observa-vh4032n.patch | 125 ----
.../664-board_bcm6368-actiontec-r1000h.patch | 48 --
.../681-board_bcm63269-brcm-bcm963269bhr.patch | 67 --
.../682-board_bcm63268-inteno-vg50.patch | 67 --
.../683-board_bcm63268-brcm-bcm963268bu-p300.patch | 84 ---
.../patches-5.4/684-board_bcm63168-sky-sr102.patch | 61 --
.../685-board-bcm63168-comtrend-vr-3032u.patch | 60 --
.../686-board-bcm63169-comtrend-vg-8050.patch | 50 --
.../687-board-bcm63167-sercomm-h500-s.patch | 56 --
75 files changed, 2730 insertions(+), 4067 deletions(-)
diff --git a/target/linux/bcm63xx/patches-5.4/501-board_bcm6318-brcm-bcm96318ref.patch b/target/linux/bcm63xx/patches-5.4/501-board_bcm6318-brcm-bcm96318ref.patch
deleted file mode 100644
index 0313285eaa..0000000000
--- a/target/linux/bcm63xx/patches-5.4/501-board_bcm6318-brcm-bcm96318ref.patch
+++ /dev/null
@@ -1,74 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -49,6 +49,53 @@ static struct board_info __initdata boar
- #endif /* CONFIG_BCM63XX_CPU_3368 */
-
- /*
-+ * known 6318 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_6318
-+static struct board_info __initdata board_96318ref = {
-+ .name = "96318REF",
-+ .expected_cpu_id = 0x6318,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 1,
-+
-+ .has_usbd = 1,
-+ .usbd = {
-+ .use_fullspeed = 0,
-+ .port_no = 0,
-+ },
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "Port 1",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "Port 2",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "Port 3",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "Port 4",
-+ },
-+ },
-+ },
-+};
-+#endif /* CONFIG_BCM63XX_CPU_6318 */
-+
-+/*
- * known 6328 boards
- */
- #ifdef CONFIG_BCM63XX_CPU_6328
-@@ -410,6 +457,9 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_3368
- &board_cvg834g,
- #endif /* CONFIG_BCM63XX_CPU_3368 */
-+#ifdef CONFIG_BCM63XX_CPU_6318
-+ &board_96318ref,
-+#endif /* CONFIG_BCM63XX_CPU_6318 */
- #ifdef CONFIG_BCM63XX_CPU_6328
- &board_96328avng,
- #endif /* CONFIG_BCM63XX_CPU_6328 */
-@@ -444,6 +494,7 @@ static struct of_device_id const bcm963x
- { .compatible = "netgear,cvg834g", .data = &board_cvg834g, },
- #endif /* CONFIG_BCM63XX_CPU_3368 */
- #ifdef CONFIG_BCM63XX_CPU_6318
-+ { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
- #endif /* CONFIG_BCM63XX_CPU_6318 */
- #ifdef CONFIG_BCM63XX_CPU_6328
- { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
diff --git a/target/linux/bcm63xx/patches-5.4/521-MIPS-BCM63XX-add-96328avng-reference-board.patch b/target/linux/bcm63xx/patches-5.4/501-board_bcm6328-extend-96328avng-reference-board.patch
similarity index 57%
rename from target/linux/bcm63xx/patches-5.4/521-MIPS-BCM63XX-add-96328avng-reference-board.patch
rename to target/linux/bcm63xx/patches-5.4/501-board_bcm6328-extend-96328avng-reference-board.patch
index 43ad569e1e..d65b9413ec 100644
--- a/target/linux/bcm63xx/patches-5.4/521-MIPS-BCM63XX-add-96328avng-reference-board.patch
+++ b/target/linux/bcm63xx/patches-5.4/501-board_bcm6328-extend-96328avng-reference-board.patch
@@ -1,15 +1,6 @@
-From c93c2bbf0cc96da5a47d77f01daf6c983cfe4216 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski at gmail.com>
-Date: Tue, 29 May 2012 10:52:25 +0200
-Subject: [PATCH] MIPS: BCM63XX: add 96328avng reference board
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 77 +++++++++++++++++++++++++++++
- 1 files changed, 77 insertions(+), 0 deletions(-)
-
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -321,6 +321,32 @@ static struct board_info __initdata boar
+@@ -64,6 +64,32 @@ static struct board_info __initdata boar
.use_fullspeed = 0,
.port_no = 0,
},
diff --git a/target/linux/bcm63xx/patches-5.4/601-board-bcm6358-DWV-S0_fixes.patch b/target/linux/bcm63xx/patches-5.4/502-board-bcm6358-DWV-S0_fixes.patch
similarity index 74%
rename from target/linux/bcm63xx/patches-5.4/601-board-bcm6358-DWV-S0_fixes.patch
rename to target/linux/bcm63xx/patches-5.4/502-board-bcm6358-DWV-S0_fixes.patch
index fa35102aa0..8019136861 100644
--- a/target/linux/bcm63xx/patches-5.4/601-board-bcm6358-DWV-S0_fixes.patch
+++ b/target/linux/bcm63xx/patches-5.4/502-board-bcm6358-DWV-S0_fixes.patch
@@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1468,6 +1468,7 @@ static struct board_info __initdata boar
+@@ -426,6 +426,7 @@ static struct board_info __initdata boar
},
.has_ohci0 = 1,
diff --git a/target/linux/bcm63xx/patches-5.4/502-board_bcm6318-brcm-bcm96318ref-p300.patch b/target/linux/bcm63xx/patches-5.4/502-board_bcm6318-brcm-bcm96318ref-p300.patch
deleted file mode 100644
index 1796d066a5..0000000000
--- a/target/linux/bcm63xx/patches-5.4/502-board_bcm6318-brcm-bcm96318ref-p300.patch
+++ /dev/null
@@ -1,67 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -93,6 +93,48 @@ static struct board_info __initdata boar
- },
- },
- };
-+
-+static struct board_info __initdata board_96318ref_p300 = {
-+ .name = "96318REF_P300",
-+ .expected_cpu_id = 0x6318,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 1,
-+
-+ .has_usbd = 1,
-+ .usbd = {
-+ .use_fullspeed = 0,
-+ .port_no = 0,
-+ },
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "Port 1",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "Port 2",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "Port 3",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "Port 4",
-+ },
-+ },
-+ },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6318 */
-
- /*
-@@ -459,6 +501,7 @@ static const struct board_info __initcon
- #endif /* CONFIG_BCM63XX_CPU_3368 */
- #ifdef CONFIG_BCM63XX_CPU_6318
- &board_96318ref,
-+ &board_96318ref_p300,
- #endif /* CONFIG_BCM63XX_CPU_6318 */
- #ifdef CONFIG_BCM63XX_CPU_6328
- &board_96328avng,
-@@ -495,6 +538,7 @@ static struct of_device_id const bcm963x
- #endif /* CONFIG_BCM63XX_CPU_3368 */
- #ifdef CONFIG_BCM63XX_CPU_6318
- { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
-+ { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
- #endif /* CONFIG_BCM63XX_CPU_6318 */
- #ifdef CONFIG_BCM63XX_CPU_6328
- { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
diff --git a/target/linux/bcm63xx/patches-5.4/503-board_bcm6318-d-link-dsl-275xb-d.patch b/target/linux/bcm63xx/patches-5.4/503-board_bcm6318-d-link-dsl-275xb-d.patch
deleted file mode 100644
index 05022aa277..0000000000
--- a/target/linux/bcm63xx/patches-5.4/503-board_bcm6318-d-link-dsl-275xb-d.patch
+++ /dev/null
@@ -1,91 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -135,6 +135,72 @@ static struct board_info __initdata boar
- },
- },
- };
-+
-+static struct sprom_fixup __initdata dsl2751b_e1_fixups[] = {
-+ { .offset = 96, .value = 0x2046 },
-+ { .offset = 97, .value = 0xfe9d },
-+ { .offset = 98, .value = 0x1854 },
-+ { .offset = 99, .value = 0xfa59 },
-+ { .offset = 112, .value = 0x2046 },
-+ { .offset = 113, .value = 0xfe79 },
-+ { .offset = 114, .value = 0x17f5 },
-+ { .offset = 115, .value = 0xfa47 },
-+ { .offset = 161, .value = 0x2222 },
-+ { .offset = 162, .value = 0x2222 },
-+ { .offset = 169, .value = 0x2222 },
-+ { .offset = 170, .value = 0x2222 },
-+ { .offset = 171, .value = 0x5555 },
-+ { .offset = 172, .value = 0x5555 },
-+ { .offset = 173, .value = 0x4444 },
-+ { .offset = 174, .value = 0x4444 },
-+ { .offset = 175, .value = 0x5555 },
-+ { .offset = 176, .value = 0x5555 },
-+};
-+
-+static struct board_info __initdata board_dsl_2751b_d1 = {
-+ .name = "AW5200B",
-+ .expected_cpu_id = 0x6318,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 1,
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "Port 1",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "Port 2",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "Port 3",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "Port 4",
-+ },
-+ },
-+ },
-+
-+ .use_fallback_sprom = 1,
-+ .fallback_sprom = {
-+ .type = SPROM_BCM43217,
-+ .pci_bus = 1,
-+ .pci_dev = 0,
-+ .board_fixups = dsl2751b_e1_fixups,
-+ .num_board_fixups = ARRAY_SIZE(dsl2751b_e1_fixups),
-+ },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6318 */
-
- /*
-@@ -502,6 +568,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6318
- &board_96318ref,
- &board_96318ref_p300,
-+ &board_dsl_2751b_d1,
- #endif /* CONFIG_BCM63XX_CPU_6318 */
- #ifdef CONFIG_BCM63XX_CPU_6328
- &board_96328avng,
-@@ -539,6 +606,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6318
- { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
- { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
-+ { .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, },
- #endif /* CONFIG_BCM63XX_CPU_6318 */
- #ifdef CONFIG_BCM63XX_CPU_6328
- { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
diff --git a/target/linux/bcm63xx/patches-5.4/504-board_bcm6318-sagem-fast-2704n.patch b/target/linux/bcm63xx/patches-5.4/504-board_bcm6318-sagem-fast-2704n.patch
deleted file mode 100644
index 2bb1f60241..0000000000
--- a/target/linux/bcm63xx/patches-5.4/504-board_bcm6318-sagem-fast-2704n.patch
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -201,6 +201,49 @@ static struct board_info __initdata boar
- .num_board_fixups = ARRAY_SIZE(dsl2751b_e1_fixups),
- },
- };
-+
-+static struct board_info __initdata board_FAST2704N = {
-+ .name = "F at ST2704N",
-+ .expected_cpu_id = 0x6318,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 1,
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "Port 1",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "Port 2",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "Port 3",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "Port 4",
-+ },
-+ },
-+ },
-+
-+ .use_fallback_sprom = 1,
-+ .fallback_sprom = {
-+ .type = SPROM_BCM43217,
-+ .pci_bus = 1,
-+ .pci_dev = 0,
-+ },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6318 */
-
- /*
-@@ -569,6 +612,7 @@ static const struct board_info __initcon
- &board_96318ref,
- &board_96318ref_p300,
- &board_dsl_2751b_d1,
-+ &board_FAST2704N,
- #endif /* CONFIG_BCM63XX_CPU_6318 */
- #ifdef CONFIG_BCM63XX_CPU_6328
- &board_96328avng,
-@@ -607,6 +651,7 @@ static struct of_device_id const bcm963x
- { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
- { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
- { .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, },
-+ { .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, },
- #endif /* CONFIG_BCM63XX_CPU_6318 */
- #ifdef CONFIG_BCM63XX_CPU_6328
- { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
diff --git a/target/linux/bcm63xx/patches-5.4/505-board_bcm6318-comtrend-ar-5315u.patch b/target/linux/bcm63xx/patches-5.4/505-board_bcm6318-comtrend-ar-5315u.patch
deleted file mode 100644
index dc480f239d..0000000000
--- a/target/linux/bcm63xx/patches-5.4/505-board_bcm6318-comtrend-ar-5315u.patch
+++ /dev/null
@@ -1,84 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -136,6 +136,65 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct sprom_fixup __initdata ar5315u_fixups[] = {
-+ { .offset = 6, .value = 0x1c00 },
-+ { .offset = 65, .value = 0x1255 },
-+ { .offset = 97, .value = 0xfe55 },
-+ { .offset = 98, .value = 0x171d },
-+ { .offset = 99, .value = 0xfa42 },
-+ { .offset = 113, .value = 0xfeb7 },
-+ { .offset = 114, .value = 0x18cd },
-+ { .offset = 115, .value = 0xfa4f },
-+ { .offset = 162, .value = 0x6444 },
-+ { .offset = 170, .value = 0x6444 },
-+ { .offset = 172, .value = 0x6444 },
-+};
-+
-+static struct board_info __initdata board_AR5315u = {
-+ .name = "96318A-1441N1",
-+ .expected_cpu_id = 0x6318,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 1,
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "LAN4",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "LAN3",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "LAN2",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "LAN1",
-+ },
-+ },
-+ },
-+
-+ .use_fallback_sprom = 1,
-+ .fallback_sprom = {
-+ .type = SPROM_BCM43217,
-+ .pci_bus = 1,
-+ .pci_dev = 0,
-+ .board_fixups = ar5315u_fixups,
-+ .num_board_fixups = ARRAY_SIZE(ar5315u_fixups),
-+ },
-+};
-+
- static struct sprom_fixup __initdata dsl2751b_e1_fixups[] = {
- { .offset = 96, .value = 0x2046 },
- { .offset = 97, .value = 0xfe9d },
-@@ -611,6 +670,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6318
- &board_96318ref,
- &board_96318ref_p300,
-+ &board_AR5315u,
- &board_dsl_2751b_d1,
- &board_FAST2704N,
- #endif /* CONFIG_BCM63XX_CPU_6318 */
-@@ -650,6 +710,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6318
- { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
- { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
-+ { .compatible = "comtrend,ar-5315u", .data = &board_AR5315u, },
- { .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, },
- { .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, },
- #endif /* CONFIG_BCM63XX_CPU_6318 */
diff --git a/target/linux/bcm63xx/patches-5.4/511-board_bcm6318.patch b/target/linux/bcm63xx/patches-5.4/511-board_bcm6318.patch
new file mode 100644
index 0000000000..ef5989ba43
--- /dev/null
+++ b/target/linux/bcm63xx/patches-5.4/511-board_bcm6318.patch
@@ -0,0 +1,292 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -49,6 +49,263 @@ static struct board_info __initdata boar
+ #endif /* CONFIG_BCM63XX_CPU_3368 */
+
+ /*
++ * known 6318 boards
++ */
++#ifdef CONFIG_BCM63XX_CPU_6318
++static struct board_info __initdata board_96318ref = {
++ .name = "96318REF",
++ .expected_cpu_id = 0x6318,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 1,
++
++ .has_usbd = 1,
++ .usbd = {
++ .use_fullspeed = 0,
++ .port_no = 0,
++ },
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "Port 1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "Port 2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "Port 3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "Port 4",
++ },
++ },
++ },
++};
++
++static struct board_info __initdata board_96318ref_p300 = {
++ .name = "96318REF_P300",
++ .expected_cpu_id = 0x6318,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 1,
++
++ .has_usbd = 1,
++ .usbd = {
++ .use_fullspeed = 0,
++ .port_no = 0,
++ },
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "Port 1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "Port 2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "Port 3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "Port 4",
++ },
++ },
++ },
++};
++
++static struct sprom_fixup __initdata ar5315u_fixups[] = {
++ { .offset = 6, .value = 0x1c00 },
++ { .offset = 65, .value = 0x1255 },
++ { .offset = 97, .value = 0xfe55 },
++ { .offset = 98, .value = 0x171d },
++ { .offset = 99, .value = 0xfa42 },
++ { .offset = 113, .value = 0xfeb7 },
++ { .offset = 114, .value = 0x18cd },
++ { .offset = 115, .value = 0xfa4f },
++ { .offset = 162, .value = 0x6444 },
++ { .offset = 170, .value = 0x6444 },
++ { .offset = 172, .value = 0x6444 },
++};
++
++static struct board_info __initdata board_AR5315u = {
++ .name = "96318A-1441N1",
++ .expected_cpu_id = 0x6318,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 1,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "LAN4",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "LAN3",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "LAN2",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "LAN1",
++ },
++ },
++ },
++
++ .use_fallback_sprom = 1,
++ .fallback_sprom = {
++ .type = SPROM_BCM43217,
++ .pci_bus = 1,
++ .pci_dev = 0,
++ .board_fixups = ar5315u_fixups,
++ .num_board_fixups = ARRAY_SIZE(ar5315u_fixups),
++ },
++};
++
++static struct sprom_fixup __initdata dsl2751b_e1_fixups[] = {
++ { .offset = 96, .value = 0x2046 },
++ { .offset = 97, .value = 0xfe9d },
++ { .offset = 98, .value = 0x1854 },
++ { .offset = 99, .value = 0xfa59 },
++ { .offset = 112, .value = 0x2046 },
++ { .offset = 113, .value = 0xfe79 },
++ { .offset = 114, .value = 0x17f5 },
++ { .offset = 115, .value = 0xfa47 },
++ { .offset = 161, .value = 0x2222 },
++ { .offset = 162, .value = 0x2222 },
++ { .offset = 169, .value = 0x2222 },
++ { .offset = 170, .value = 0x2222 },
++ { .offset = 171, .value = 0x5555 },
++ { .offset = 172, .value = 0x5555 },
++ { .offset = 173, .value = 0x4444 },
++ { .offset = 174, .value = 0x4444 },
++ { .offset = 175, .value = 0x5555 },
++ { .offset = 176, .value = 0x5555 },
++};
++
++static struct board_info __initdata board_dsl_2751b_d1 = {
++ .name = "AW5200B",
++ .expected_cpu_id = 0x6318,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 1,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "Port 1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "Port 2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "Port 3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "Port 4",
++ },
++ },
++ },
++
++ .use_fallback_sprom = 1,
++ .fallback_sprom = {
++ .type = SPROM_BCM43217,
++ .pci_bus = 1,
++ .pci_dev = 0,
++ .board_fixups = dsl2751b_e1_fixups,
++ .num_board_fixups = ARRAY_SIZE(dsl2751b_e1_fixups),
++ },
++};
++
++static struct board_info __initdata board_FAST2704N = {
++ .name = "F at ST2704N",
++ .expected_cpu_id = 0x6318,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 1,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "Port 1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "Port 2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "Port 3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "Port 4",
++ },
++ },
++ },
++
++ .use_fallback_sprom = 1,
++ .fallback_sprom = {
++ .type = SPROM_BCM43217,
++ .pci_bus = 1,
++ .pci_dev = 0,
++ },
++};
++#endif /* CONFIG_BCM63XX_CPU_6318 */
++
++/*
+ * known 6328 boards
+ */
+ #ifdef CONFIG_BCM63XX_CPU_6328
+@@ -437,6 +694,13 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_3368
+ &board_cvg834g,
+ #endif /* CONFIG_BCM63XX_CPU_3368 */
++#ifdef CONFIG_BCM63XX_CPU_6318
++ &board_96318ref,
++ &board_96318ref_p300,
++ &board_AR5315u,
++ &board_dsl_2751b_d1,
++ &board_FAST2704N,
++#endif /* CONFIG_BCM63XX_CPU_6318 */
+ #ifdef CONFIG_BCM63XX_CPU_6328
+ &board_96328avng,
+ #endif /* CONFIG_BCM63XX_CPU_6328 */
+@@ -471,6 +735,11 @@ static struct of_device_id const bcm963x
+ { .compatible = "netgear,cvg834g", .data = &board_cvg834g, },
+ #endif /* CONFIG_BCM63XX_CPU_3368 */
+ #ifdef CONFIG_BCM63XX_CPU_6318
++ { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
++ { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
++ { .compatible = "comtrend,ar-5315u", .data = &board_AR5315u, },
++ { .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, },
++ { .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, },
+ #endif /* CONFIG_BCM63XX_CPU_6318 */
+ #ifdef CONFIG_BCM63XX_CPU_6328
+ { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
diff --git a/target/linux/bcm63xx/patches-5.4/512-board_bcm6328.patch b/target/linux/bcm63xx/patches-5.4/512-board_bcm6328.patch
new file mode 100644
index 0000000000..abab912092
--- /dev/null
+++ b/target/linux/bcm63xx/patches-5.4/512-board_bcm6328.patch
@@ -0,0 +1,521 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -348,6 +348,482 @@ static struct board_info __initdata boar
+ },
+ },
+ };
++
++static struct board_info __initdata board_963281TAN = {
++ .name = "963281TAN",
++ .expected_cpu_id = 0x6328,
++
++ .has_pci = 1,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "Port 1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "Port 2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "Port 3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "Port 4",
++ },
++ },
++ },
++};
++
++static struct board_info __initdata board_A4001N = {
++ .name = "96328dg2x2",
++ .expected_cpu_id = 0x6328,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 1,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "Port 1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "Port 2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "Port 3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "Port 4",
++ },
++ },
++ },
++
++ .use_fallback_sprom = 1,
++ .fallback_sprom = {
++ .type = SPROM_BCM43225,
++ .pci_bus = 1,
++ .pci_dev = 0,
++ },
++};
++
++static struct board_info __initdata board_A4001N1 = {
++ .name = "963281T_TEF",
++ .expected_cpu_id = 0x6328,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 1,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "Port 1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "Port 2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "Port 3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "Port 4",
++ },
++ },
++ },
++
++ .use_fallback_sprom = 1,
++ .fallback_sprom = {
++ .type = SPROM_BCM43225,
++ .pci_bus = 1,
++ .pci_dev = 0,
++ },
++};
++
++static struct sprom_fixup __initdata ad1018_fixups[] = {
++ { .offset = 6, .value = 0x1c00 },
++ { .offset = 65, .value = 0x1256 },
++ { .offset = 96, .value = 0x2046 },
++ { .offset = 97, .value = 0xfe69 },
++ { .offset = 98, .value = 0x1726 },
++ { .offset = 99, .value = 0xfa5c },
++ { .offset = 112, .value = 0x2046 },
++ { .offset = 113, .value = 0xfea8 },
++ { .offset = 114, .value = 0x1978 },
++ { .offset = 115, .value = 0xfa26 },
++ { .offset = 161, .value = 0x2222 },
++ { .offset = 169, .value = 0x2222 },
++ { .offset = 171, .value = 0x2222 },
++ { .offset = 173, .value = 0x2222 },
++ { .offset = 174, .value = 0x4444 },
++ { .offset = 175, .value = 0x2222 },
++ { .offset = 176, .value = 0x4444 },
++};
++
++static struct board_info __initdata board_AD1018 = {
++ .name = "96328avngr",
++ .expected_cpu_id = 0x6328,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 1,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "FIBRE",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "LAN3",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "LAN2",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "LAN1",
++ },
++ },
++ },
++
++ .use_fallback_sprom = 1,
++ .fallback_sprom = {
++ .type = SPROM_BCM43217,
++ .pci_bus = 1,
++ .pci_dev = 0,
++ .board_fixups = ad1018_fixups,
++ .num_board_fixups = ARRAY_SIZE(ad1018_fixups),
++ },
++};
++
++static struct sprom_fixup __initdata ar5381u_fixups[] = {
++ { .offset = 97, .value = 0xfee5 },
++ { .offset = 98, .value = 0x157c },
++ { .offset = 99, .value = 0xfae7 },
++ { .offset = 113, .value = 0xfefa },
++ { .offset = 114, .value = 0x15d6 },
++ { .offset = 115, .value = 0xfaf8 },
++};
++
++static struct board_info __initdata board_AR5381u = {
++ .name = "96328A-1241N",
++ .expected_cpu_id = 0x6328,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 1,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "Port 1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "Port 2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "Port 3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "Port 4",
++ },
++ },
++ },
++
++ .use_fallback_sprom = 1,
++ .fallback_sprom = {
++ .type = SPROM_BCM43225,
++ .pci_bus = 1,
++ .pci_dev = 0,
++ .board_fixups = ar5381u_fixups,
++ .num_board_fixups = ARRAY_SIZE(ar5381u_fixups),
++ },
++};
++
++static struct sprom_fixup __initdata ar5387un_fixups[] = {
++ { .offset = 2, .value = 0x05bb },
++ { .offset = 65, .value = 0x1204 },
++ { .offset = 78, .value = 0x0303 },
++ { .offset = 79, .value = 0x0202 },
++ { .offset = 80, .value = 0xff02 },
++ { .offset = 87, .value = 0x0315 },
++ { .offset = 88, .value = 0x0315 },
++ { .offset = 96, .value = 0x2048 },
++ { .offset = 97, .value = 0xff11 },
++ { .offset = 98, .value = 0x1567 },
++ { .offset = 99, .value = 0xfb24 },
++ { .offset = 100, .value = 0x3e3c },
++ { .offset = 101, .value = 0x4038 },
++ { .offset = 102, .value = 0xfe7f },
++ { .offset = 103, .value = 0x1279 },
++ { .offset = 112, .value = 0x2048 },
++ { .offset = 113, .value = 0xff03 },
++ { .offset = 114, .value = 0x154c },
++ { .offset = 115, .value = 0xfb27 },
++ { .offset = 116, .value = 0x3e3c },
++ { .offset = 117, .value = 0x4038 },
++ { .offset = 118, .value = 0xfe87 },
++ { .offset = 119, .value = 0x1233 },
++ { .offset = 203, .value = 0x2226 },
++};
++
++static struct board_info __initdata board_AR5387un = {
++ .name = "96328A-1441N1",
++ .expected_cpu_id = 0x6328,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 1,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "Port 1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "Port 2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "Port 3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "Port 4",
++ },
++ },
++ },
++
++ .use_fallback_sprom = 1,
++ .fallback_sprom = {
++ .type = SPROM_BCM43225,
++ .pci_bus = 1,
++ .pci_dev = 0,
++ .board_fixups = ar5387un_fixups,
++ .num_board_fixups = ARRAY_SIZE(ar5387un_fixups),
++ },
++};
++
++static struct board_info __initdata board_dsl_274xb_f1 = {
++ .name = "AW4339U",
++ .expected_cpu_id = 0x6328,
++
++ .has_pci = 1,
++
++ .has_caldata = 1,
++ .caldata = {
++ {
++ .vendor = PCI_VENDOR_ID_ATHEROS,
++ .caldata_offset = 0x7d1000,
++ .slot = 0,
++ .led_pin = -1,
++ .led_active_high = 1,
++ },
++ },
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "Port 4",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "Port 3",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "Port 2",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "Port 1",
++ },
++ },
++ },
++};
++
++static struct board_info __initdata board_FAST2704V2 = {
++ .name = "F at ST2704V2",
++ .expected_cpu_id = 0x6328,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .has_usbd = 1,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "Port 1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "Port 2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "Port 3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "Port 4",
++ },
++ },
++ },
++};
++
++static struct board_info __initdata board_PDG_A4001N_A_000_1A1_AX = {
++ .name = "96328avng",
++ .expected_cpu_id = 0x6328,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 1,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "Port 1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "Port 2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "Port 3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "Port 4",
++ },
++ },
++ },
++
++ .use_fallback_sprom = 1,
++ .fallback_sprom = {
++ .type = SPROM_BCM43225,
++ .pci_bus = 1,
++ .pci_dev = 0,
++ },
++};
++
++static struct board_info __initdata board_R5010UNV2 = {
++ .name = "96328ang",
++ .expected_cpu_id = 0x6328,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 1,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "Port 1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "Port 2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "Port 3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "Port 4",
++ },
++ },
++ },
++
++ .use_fallback_sprom = 1,
++ .fallback_sprom = {
++ .type = SPROM_BCM43217,
++ .pci_bus = 1,
++ .pci_dev = 0,
++ },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6328 */
+
+ /*
+@@ -703,6 +1179,16 @@ static const struct board_info __initcon
+ #endif /* CONFIG_BCM63XX_CPU_6318 */
+ #ifdef CONFIG_BCM63XX_CPU_6328
+ &board_96328avng,
++ &board_963281TAN,
++ &board_A4001N,
++ &board_A4001N1,
++ &board_AD1018,
++ &board_AR5381u,
++ &board_AR5387un,
++ &board_dsl_274xb_f1,
++ &board_FAST2704V2,
++ &board_PDG_A4001N_A_000_1A1_AX,
++ &board_R5010UNV2,
+ #endif /* CONFIG_BCM63XX_CPU_6328 */
+ #ifdef CONFIG_BCM63XX_CPU_6338
+ &board_96338gw,
+@@ -742,7 +1228,18 @@ static struct of_device_id const bcm963x
+ { .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, },
+ #endif /* CONFIG_BCM63XX_CPU_6318 */
+ #ifdef CONFIG_BCM63XX_CPU_6328
++ { .compatible = "adb,a4001n", .data = &board_A4001N, },
++ { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
++ { .compatible = "adb,pdg-a4001n-a-000-1a1-ax", .data = &board_PDG_A4001N_A_000_1A1_AX, },
+ { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
++ { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
++ { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, },
++ { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
++ { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
++ { .compatible = "nucom,r5010un-v2", .data = &board_R5010UNV2, },
++ { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, },
++ { .compatible = "sercomm,ad1018", .data = &board_AD1018, },
++ { .compatible = "sercomm,ad1018-nor", .data = &board_AD1018, },
+ #endif /* CONFIG_BCM63XX_CPU_6328 */
+ #ifdef CONFIG_BCM63XX_CPU_6338
+ { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
diff --git a/target/linux/bcm63xx/patches-5.4/541-board-bcm6338-d-link-dsl-2640u.patch b/target/linux/bcm63xx/patches-5.4/513-board-bcm6338.patch
similarity index 64%
rename from target/linux/bcm63xx/patches-5.4/541-board-bcm6338-d-link-dsl-2640u.patch
rename to target/linux/bcm63xx/patches-5.4/513-board-bcm6338.patch
index 2c6a4950bb..85c8e6c390 100644
--- a/target/linux/bcm63xx/patches-5.4/541-board-bcm6338-d-link-dsl-2640u.patch
+++ b/target/linux/bcm63xx/patches-5.4/513-board-bcm6338.patch
@@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -858,6 +858,19 @@ static struct board_info __initdata boar
+@@ -857,6 +857,32 @@ static struct board_info __initdata boar
.force_duplex_full = 1,
},
};
@@ -16,23 +16,38 @@
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
++};
++
++static struct board_info __initdata board_rta1320_16m = {
++ .name = "RTA1320_16M",
++ .expected_cpu_id = 0x6338,
++
++ .has_enet0 = 1,
++ .enet0 = {
++ .has_phy = 1,
++ .phy_id = 0,
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
+};
#endif /* CONFIG_BCM63XX_CPU_6338 */
/*
-@@ -1193,6 +1206,7 @@ static const struct board_info __initcon
+@@ -1193,6 +1219,8 @@ static const struct board_info __initcon
#ifdef CONFIG_BCM63XX_CPU_6338
&board_96338gw,
&board_96338w,
+ &board_96338w2_e7t,
++ &board_rta1320_16m,
#endif /* CONFIG_BCM63XX_CPU_6338 */
#ifdef CONFIG_BCM63XX_CPU_6345
&board_96345gw2,
-@@ -1244,6 +1258,7 @@ static struct of_device_id const bcm963x
+@@ -1244,6 +1272,8 @@ static struct of_device_id const bcm963x
#ifdef CONFIG_BCM63XX_CPU_6338
{ .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
{ .compatible = "brcm,bcm96338w", .data = &board_96338w, },
+ { .compatible = "d-link,dsl-2640u", .data = &board_96338w2_e7t, },
++ { .compatible = "dynalink,rta1320", .data = &board_rta1320_16m, },
#endif /* CONFIG_BCM63XX_CPU_6338 */
#ifdef CONFIG_BCM63XX_CPU_6345
{ .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, },
diff --git a/target/linux/bcm63xx/patches-5.4/551-board_bcm6345-dynalink-rta770bw-rta770w.patch b/target/linux/bcm63xx/patches-5.4/514-board_bcm6345.patch
similarity index 94%
rename from target/linux/bcm63xx/patches-5.4/551-board_bcm6345-dynalink-rta770bw-rta770w.patch
rename to target/linux/bcm63xx/patches-5.4/514-board_bcm6345.patch
index 225c754924..d881555853 100644
--- a/target/linux/bcm63xx/patches-5.4/551-board_bcm6345-dynalink-rta770bw-rta770w.patch
+++ b/target/linux/bcm63xx/patches-5.4/514-board_bcm6345.patch
@@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -894,6 +894,19 @@ static struct board_info __initdata boar
+@@ -893,6 +893,19 @@ static struct board_info __initdata boar
.name = "96345GW2",
.expected_cpu_id = 0x6345,
};
diff --git a/target/linux/bcm63xx/patches-5.4/515-board-bcm6348.patch b/target/linux/bcm63xx/patches-5.4/515-board-bcm6348.patch
new file mode 100644
index 0000000000..1e93c5e443
--- /dev/null
+++ b/target/linux/bcm63xx/patches-5.4/515-board-bcm6348.patch
@@ -0,0 +1,328 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1092,6 +1092,275 @@ static struct board_info __initdata boar
+
+ .has_ohci0 = 1,
+ };
++
++static struct board_info __initdata board_96348A_122 = {
++ .name = "96348A-122",
++ .expected_cpu_id = 0x6348,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++
++ .has_enet1 = 1,
++ .enet1 = {
++ .has_phy = 1,
++ .phy_id = 0,
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++
++ .use_fallback_sprom = 1,
++ .fallback_sprom = {
++ .type = SPROM_BCM4318,
++ .pci_bus = 0,
++ .pci_dev = 1,
++ },
++};
++
++static struct board_info __initdata board_96348_D4PW = {
++ .name = "D-4P-W",
++ .expected_cpu_id = 0x6348,
++
++ .has_pci = 1,
++
++ .has_enet1 = 1,
++ .enet1 = {
++ .has_phy = 1,
++ .phy_id = 0,
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++};
++
++static struct board_info __initdata board_96348gw_10_AR1004G = {
++ .name = "AR1004G",
++ .expected_cpu_id = 0x6348,
++
++ .has_pci = 1,
++
++ .has_enet1 = 1,
++ .enet1 = {
++ .has_phy = 1,
++ .phy_id = 0,
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++};
++
++static struct board_info __initdata board_96348sv = {
++ .name = "MAGIC",
++ .expected_cpu_id = 0x6348,
++
++ .has_pccard = 1,
++ .has_pci = 1,
++ .has_ohci0 = 1,
++
++ .has_enet0 = 1,
++ .enet0 = {
++ .has_phy = 1,
++ .use_internal_phy = 1,
++ },
++
++ .has_enet1 = 1,
++ .enet1 = {
++ /* it has BP_ENET_EXTERNAL_PHY */
++ .has_phy = 1,
++ .phy_id = 0,
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++};
++
++/* NetGear DG834G v4 */
++static struct board_info __initdata board_96348W3 = {
++ .name = "96348W3",
++ .expected_cpu_id = 0x6348,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++
++ .has_enet1 = 1,
++ .enet1 = {
++ .has_phy = 1,
++ .phy_id = 0,
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++};
++
++static struct board_info __initdata board_CPVA502plus = {
++ .name = "CPVA502+",
++ .expected_cpu_id = 0x6348,
++
++ .has_pci = 1,
++ .ephy_reset_gpio = 4,
++ .ephy_reset_gpio_flags = GPIO_ACTIVE_LOW,
++
++ .has_enet0 = 1,
++ .enet0 = {
++ .has_phy = 1,
++ .use_internal_phy = 1,
++ },
++
++ .has_enet1 = 1,
++ .enet1 = {
++ .has_phy = 1,
++ .phy_id = 0,
++ },
++
++ .use_fallback_sprom = 1,
++ .fallback_sprom = {
++ .type = SPROM_BCM4318,
++ .pci_bus = 0,
++ .pci_dev = 1,
++ },
++};
++
++static struct board_info __initdata board_ct536_ct5621 = {
++ .name = "CT536_CT5621",
++ .expected_cpu_id = 0x6348,
++
++ .has_pccard = 1,
++ .has_pci = 1,
++ .has_ohci0 = 1,
++
++ .has_enet1 = 1,
++ .enet1 = {
++ .has_phy = 1,
++ .phy_id = 0,
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++
++ .use_fallback_sprom = 1,
++ .fallback_sprom = {
++ .type = SPROM_BCM4318,
++ .pci_bus = 0,
++ .pci_dev = 1,
++ },
++};
++
++static struct board_info __initdata board_FAST2604 = {
++ .name = "F at ST2604",
++ .expected_cpu_id = 0x6348,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++
++ .has_enet1 = 1,
++ .enet1 = {
++ .has_phy = 1,
++ .phy_id = 0,
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++};
++
++static struct board_info __initdata board_gw6000 = {
++ .name = "GW6000",
++ .expected_cpu_id = 0x6348,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++
++ .has_enet0 = 1,
++ .enet0 = {
++ .has_phy = 1,
++ .use_internal_phy = 1,
++ },
++
++ .has_enet1 = 1,
++ .enet1 = {
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++};
++
++static struct board_info __initdata board_gw6200 = {
++ .name = "GW6200",
++ .expected_cpu_id = 0x6348,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++
++ .has_enet0 = 1,
++ .enet0 = {
++ .has_phy = 1,
++ .use_internal_phy = 1,
++ },
++
++ .has_enet1 = 1,
++ .enet1 = {
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++};
++
++static struct sprom_fixup __initdata spw500v_fixups[] = {
++ { .offset = 46, .value = 0x3046 },
++ { .offset = 47, .value = 0x15a7 },
++ { .offset = 48, .value = 0xfa89 },
++ { .offset = 49, .value = 0xfe79 },
++ { .offset = 57, .value = 0x6a49 },
++};
++
++static struct board_info __initdata board_spw500v = {
++ .name = "SPW500V",
++ .expected_cpu_id = 0x6348,
++
++ .has_pci = 1,
++
++ .has_enet0 = 1,
++ .enet0 = {
++ .has_phy = 1,
++ .use_internal_phy = 1,
++ },
++
++ .use_fallback_sprom = 1,
++ .fallback_sprom = {
++ .type = SPROM_BCM4318,
++ .pci_bus = 0,
++ .pci_dev = 1,
++ .board_fixups = spw500v_fixups,
++ .num_board_fixups = ARRAY_SIZE(spw500v_fixups),
++ },
++};
++
++/* BT Voyager 2110 */
++static struct board_info __initdata board_V2110 = {
++ .name = "V2110",
++ .expected_cpu_id = 0x6348,
++
++ .has_pci = 1,
++
++ .has_enet1 = 1,
++ .enet1 = {
++ .has_phy = 1,
++ .phy_id = 0,
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++};
++
++static struct board_info __initdata board_V2500V_BB = {
++ .name = "V2500V_BB",
++ .expected_cpu_id = 0x6348,
++
++ .has_pci = 1,
++
++ .has_enet0 = 1,
++ .enet0 = {
++ .has_phy = 1,
++ .use_internal_phy = 1,
++ },
++
++ .has_enet1 = 1,
++ .enet1 = {
++ .has_phy = 1,
++ .phy_id = 0,
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6348 */
+
+ /*
+@@ -1248,6 +1517,19 @@ static const struct board_info __initcon
+ &board_DV201AMR,
+ &board_96348gw_a,
+ &board_rta1025w_16,
++ &board_96348A_122,
++ &board_96348_D4PW,
++ &board_96348gw_10_AR1004G,
++ &board_96348sv,
++ &board_96348W3,
++ &board_CPVA502plus,
++ &board_ct536_ct5621,
++ &board_FAST2604,
++ &board_gw6000,
++ &board_gw6200,
++ &board_spw500v,
++ &board_V2110,
++ &board_V2500V_BB,
+ #endif /* CONFIG_BCM63XX_CPU_6348 */
+ #ifdef CONFIG_BCM63XX_CPU_6358
+ &board_96358vw,
+@@ -1295,15 +1577,29 @@ static struct of_device_id const bcm963x
+ { .compatible = "dynalink,rta770w", .data = &board_rta770w, },
+ #endif /* CONFIG_BCM63XX_CPU_6345 */
+ #ifdef CONFIG_BCM63XX_CPU_6348
++ { .compatible = "asmax,ar-1004g", .data = &board_96348gw_10_AR1004G, },
+ { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, },
+ { .compatible = "brcm,bcm96348r", .data = &board_96348r, },
+ { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
+ { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
+ { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
++ { .compatible = "bt,voyager-2110", .data = &board_V2110, },
++ { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, },
++ { .compatible = "comtrend,ct-5365", .data = &board_96348A_122, },
++ { .compatible = "comtrend,ct-536plus", .data = &board_ct536_ct5621, },
++ { .compatible = "comtrend,ct-5621", .data = &board_ct536_ct5621, },
++ { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
+ { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
+ { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
+ { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
++ { .compatible = "netgear,dg834g-v4", .data = &board_96348W3, },
+ { .compatible = "sagem,fast-2404", .data = &board_FAST2404, },
++ { .compatible = "sagem,fast-2604", .data = &board_FAST2604, },
++ { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
++ { .compatible = "tecom,gw6000", .data = &board_gw6000, },
++ { .compatible = "tecom,gw6200", .data = &board_gw6200, },
++ { .compatible = "telsey,cpva502plus", .data = &board_CPVA502plus, },
++ { .compatible = "telsey,magic", .data = &board_96348sv, },
+ { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
+ { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },
+ #endif /* CONFIG_BCM63XX_CPU_6348 */
diff --git a/target/linux/bcm63xx/patches-5.4/516-board-bcm6358.patch b/target/linux/bcm63xx/patches-5.4/516-board-bcm6358.patch
new file mode 100644
index 0000000000..18f813b9b8
--- /dev/null
+++ b/target/linux/bcm63xx/patches-5.4/516-board-bcm6358.patch
@@ -0,0 +1,384 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -12,6 +12,7 @@
+ #include <linux/init.h>
+ #include <linux/kernel.h>
+ #include <linux/string.h>
++#include <linux/pci_ids.h>
+ #include <asm/addrspace.h>
+ #include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+@@ -1445,6 +1446,88 @@ static struct board_info __initdata boar
+ .has_ehci0 = 1,
+ };
+
++static struct board_info __initdata board_CPVA642 = {
++ .name = "CPVA642",
++ .expected_cpu_id = 0x6358,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++
++ .has_enet1 = 1,
++ .enet1 = {
++ .has_phy = 1,
++ .phy_id = 0,
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++};
++
++static struct board_info __initdata board_ct6373_1 = {
++ .name = "CT6373-1",
++ .expected_cpu_id = 0x6358,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++
++ .has_enet1 = 1,
++ .enet1 = {
++ .has_phy = 1,
++ .phy_id = 0,
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++
++ .use_fallback_sprom = 1,
++ .fallback_sprom = {
++ .type = SPROM_BCM4318,
++ .pci_bus = 0,
++ .pci_dev = 1,
++ },
++};
++
++/* D-Link DSL-274xB revison C2/C3 */
++static struct board_info __initdata board_dsl_274xb_rev_c = {
++ .name = "AW4139",
++ .expected_cpu_id = 0x6358,
++
++ .has_pci = 1,
++
++ .has_enet1 = 1,
++ .enet1 = {
++ .has_phy = 1,
++ .phy_id = 0,
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++};
++
++/* D-Link DVA-G3810BN/TL */
++static struct board_info __initdata board_DVAG3810BN = {
++ .name = "DVAG3810BN",
++ .expected_cpu_id = 0x6358,
++
++ .has_pccard = 1,
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++
++ .has_enet0 = 1,
++ .enet0 = {
++ .has_phy = 1,
++ .use_internal_phy = 1,
++ },
++
++ .has_enet1 = 1,
++ .enet1 = {
++ .has_phy = 1,
++ .phy_id = 0,
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++};
++
+ static struct board_info __initdata board_DWVS0 = {
+ .name = "DWV-S0",
+ .expected_cpu_id = 0x6358,
+@@ -1469,6 +1552,238 @@ static struct board_info __initdata boar
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ };
++
++static struct board_info __initdata board_homehub2a = {
++ .name = "HOMEHUB2A",
++ .expected_cpu_id = 0x6358,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 2,
++
++ .has_enet1 = 1,
++ .enet1 = {
++ .has_phy = 1,
++ .phy_id = 0,
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++
++ .use_fallback_sprom = 1,
++ .fallback_sprom = {
++ .type = SPROM_BCM4322,
++ .pci_bus = 0,
++ .pci_dev = 1,
++ },
++};
++
++static struct board_info __initdata board_HW520 = {
++ .name = "HW6358GW_B",
++ .expected_cpu_id = 0x6358,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++
++ .has_enet0 = 1,
++ .enet0 = {
++ .has_phy = 1,
++ .use_internal_phy = 1,
++ },
++
++ .has_enet1 = 1,
++ .enet1 = {
++ .has_phy = 1,
++ .phy_id = 0,
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++
++ .use_fallback_sprom = 1,
++ .fallback_sprom = {
++ .type = SPROM_BCM4318,
++ .pci_bus = 0,
++ .pci_dev = 1,
++ },
++};
++
++static struct board_info __initdata board_HW553 = {
++ .name = "HW553",
++ .expected_cpu_id = 0x6358,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 2,
++
++ .has_enet1 = 1,
++ .enet1 = {
++ .has_phy = 1,
++ .phy_id = 0,
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++
++ .use_fallback_sprom = 1,
++ .fallback_sprom = {
++ .type = SPROM_BCM4318,
++ .pci_bus = 0,
++ .pci_dev = 1,
++ },
++};
++
++static struct board_info __initdata board_HW556_A = {
++ .name = "HW556_A",
++ .expected_cpu_id = 0x6358,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 2,
++
++ .has_caldata = 1,
++ .caldata = {
++ {
++ .vendor = PCI_VENDOR_ID_ATHEROS,
++ .caldata_offset = 0xf7e000,
++ .slot = 1,
++ .endian_check = 1,
++ .led_pin = 2,
++ .led_active_high = 1,
++ },
++ },
++
++ .has_enet1 = 1,
++ .enet1 = {
++ .has_phy = 1,
++ .phy_id = 0,
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++};
++
++static struct board_info __initdata board_HW556_B = {
++ .name = "HW556_B",
++ .expected_cpu_id = 0x6358,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 2,
++
++ .has_caldata = 1,
++ .caldata = {
++ {
++ .vendor = PCI_VENDOR_ID_ATHEROS,
++ .caldata_offset = 0xefe000,
++ .slot = 1,
++ .endian_check = 1,
++ .led_pin = 2,
++ .led_active_high = 1,
++ },
++ },
++
++ .has_enet1 = 1,
++ .enet1 = {
++ .has_phy = 1,
++ .phy_id = 0,
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++};
++
++static struct board_info __initdata board_HW556_C = {
++ .name = "HW556_C",
++ .expected_cpu_id = 0x6358,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 2,
++
++ .has_caldata = 1,
++ .caldata = {
++ {
++ .vendor = PCI_VENDOR_ID_RALINK,
++ .caldata_offset = 0xeffe00,
++ .slot = 1,
++ .eeprom = "rt2x00.eeprom",
++ },
++ },
++
++ .has_enet1 = 1,
++ .enet1 = {
++ .has_phy = 1,
++ .phy_id = 0,
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++};
++
++static struct board_info __initdata board_nb4_ser_r0 = {
++ .name = "NB4-SER-r0",
++ .expected_cpu_id = 0x6358,
++
++ .has_pccard = 1,
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 2,
++
++ .has_enet0 = 1,
++ .enet0 = {
++ .has_phy = 1,
++ .use_internal_phy = 1,
++ },
++
++ .has_enet1 = 1,
++ .enet1 = {
++ .has_phy = 1,
++ .phy_id = 0,
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++};
++
++static struct board_info __initdata board_nb4_fxc_r1 = {
++ .name = "NB4-FXC-r1",
++ .expected_cpu_id = 0x6358,
++
++ .has_pccard = 1,
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 2,
++
++ .has_enet0 = 1,
++ .enet0 = {
++ .has_phy = 1,
++ .use_internal_phy = 1,
++ },
++
++ .has_enet1 = 1,
++ .enet1 = {
++ .has_phy = 1,
++ .phy_id = 0,
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++};
++
++ /* T-Home Speedport W 303V Typ B */
++static struct board_info __initdata board_spw303v = {
++ .name = "96358-502V",
++ .expected_cpu_id = 0x6358,
++
++ .has_pci = 1,
++
++ .has_enet0 = 1,
++ .enet0 = {
++ .has_phy = 1,
++ .use_internal_phy = 1,
++ },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6358 */
+
+ /*
+@@ -1535,7 +1850,20 @@ static const struct board_info __initcon
+ &board_96358vw,
+ &board_96358vw2,
+ &board_AGPFS0,
++ &board_CPVA642,
++ &board_ct6373_1,
++ &board_dsl_274xb_rev_c,
++ &board_DVAG3810BN,
+ &board_DWVS0,
++ &board_homehub2a,
++ &board_HW520,
++ &board_HW553,
++ &board_HW556_A,
++ &board_HW556_B,
++ &board_HW556_C,
++ &board_nb4_ser_r0,
++ &board_nb4_fxc_r1,
++ &board_spw303v,
+ #endif /* CONFIG_BCM63XX_CPU_6358 */
+ };
+
+@@ -1607,11 +1935,24 @@ static struct of_device_id const bcm963x
+ { .compatible = "alcatel,rg100a", .data = &board_96358vw2, },
+ { .compatible = "brcm,bcm96358vw", .data = &board_96358vw, },
+ { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
++ { .compatible = "bt,home-hub-2-a", .data = &board_homehub2a, },
++ { .compatible = "comtrend,ct-6373", .data = &board_ct6373_1, },
+ { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
++ { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
++ { .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, },
++ { .compatible = "huawei,echolife-hg520v", .data = &board_HW520, },
++ { .compatible = "huawei,echolife-hg553", .data = &board_HW553, },
++ { .compatible = "huawei,echolife-hg556a-a", .data = &board_HW556_A, },
++ { .compatible = "huawei,echolife-hg556a-b", .data = &board_HW556_B, },
++ { .compatible = "huawei,echolife-hg556a-c", .data = &board_HW556_C, },
+ { .compatible = "pirelli,a226g", .data = &board_DWVS0, },
+ { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
+ { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, },
+ { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, },
++ { .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, },
++ { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, },
++ { .compatible = "t-com,speedport-w-303v", .data = &board_spw303v, },
++ { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
+ #endif /* CONFIG_BCM63XX_CPU_6358 */
+ #ifdef CONFIG_BCM63XX_CPU_6362
+ #endif /* CONFIG_BCM63XX_CPU_6362 */
diff --git a/target/linux/bcm63xx/patches-5.4/517-board_bcm6362.patch b/target/linux/bcm63xx/patches-5.4/517-board_bcm6362.patch
new file mode 100644
index 0000000000..8e87c0cc55
--- /dev/null
+++ b/target/linux/bcm63xx/patches-5.4/517-board_bcm6362.patch
@@ -0,0 +1,144 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1786,6 +1786,117 @@ static struct board_info __initdata boar
+ };
+ #endif /* CONFIG_BCM63XX_CPU_6358 */
+
++#ifdef CONFIG_BCM63XX_CPU_6362
++static struct board_info __initdata board_dgnd3700v2 = {
++ .name = "96362ADVN2xh",
++ .expected_cpu_id = 0x6362,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 2,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [4] = {
++ .used = 1,
++ .phy_id = 0xff,
++ .bypass_link = 1,
++ .force_speed = 1000,
++ .force_duplex_full = 1,
++ .name = "RGMII",
++ },
++ },
++ },
++};
++
++static struct board_info __initdata board_fast2504n = {
++ .name = "F at ST2504n",
++ .expected_cpu_id = 0x6362,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "Port 1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "Port 2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "Port 3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "Port 4",
++ },
++ },
++ },
++};
++
++static struct board_info __initdata board_hg253s_v2 = {
++ .name = "hg253s",
++ .expected_cpu_id = 0x6362,
++
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 1,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [4] = {
++ .used = 1,
++ .phy_id = 0xff,
++ .bypass_link = 1,
++ .force_speed = 1000,
++ .force_duplex_full = 1,
++ .timing_sel = 1,
++ .name = "RGMII",
++ },
++
++ [5] = {
++ .used = 1,
++ .phy_id = 24,
++ .timing_sel = 1,
++ .name = "WAN",
++ },
++ },
++ },
++};
++
++static struct board_info __initdata board_nb6 = {
++ .name = "NB6",
++ .expected_cpu_id = 0x6362,
++
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 2,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [4] = {
++ .used = 1,
++ .phy_id = 0xff,
++ .bypass_link = 1,
++ .force_speed = 1000,
++ .force_duplex_full = 1,
++ .name = "RGMII",
++ },
++ },
++ },
++};
++#endif /* CONFIG_BCM63XX_CPU_6362 */
++
+ /*
+ * all boards
+ */
+@@ -1865,6 +1976,12 @@ static const struct board_info __initcon
+ &board_nb4_fxc_r1,
+ &board_spw303v,
+ #endif /* CONFIG_BCM63XX_CPU_6358 */
++#ifdef CONFIG_BCM63XX_CPU_6362
++ &board_dgnd3700v2,
++ &board_fast2504n,
++ &board_hg253s_v2,
++ &board_nb6,
++#endif /* CONFIG_BCM63XX_CPU_6362 */
+ };
+
+ static struct of_device_id const bcm963xx_boards_dt[] = {
+@@ -1955,6 +2072,10 @@ static struct of_device_id const bcm963x
+ { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
+ #endif /* CONFIG_BCM63XX_CPU_6358 */
+ #ifdef CONFIG_BCM63XX_CPU_6362
++ { .compatible = "huawei,hg253s-v2", .data = &board_hg253s_v2, },
++ { .compatible = "netgear,dgnd3700-v2", .data = &board_dgnd3700v2, },
++ { .compatible = "sagem,fast-2504n", .data = &board_fast2504n, },
++ { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, },
+ #endif /* CONFIG_BCM63XX_CPU_6362 */
+ #ifdef CONFIG_BCM63XX_CPU_6368
+ #endif /* CONFIG_BCM63XX_CPU_6368 */
diff --git a/target/linux/bcm63xx/patches-5.4/518-board_bcm6368.patch b/target/linux/bcm63xx/patches-5.4/518-board_bcm6368.patch
new file mode 100644
index 0000000000..e745bf0848
--- /dev/null
+++ b/target/linux/bcm63xx/patches-5.4/518-board_bcm6368.patch
@@ -0,0 +1,732 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -13,6 +13,8 @@
+ #include <linux/kernel.h>
+ #include <linux/string.h>
+ #include <linux/pci_ids.h>
++#include <linux/platform_data/b53.h>
++#include <linux/spi/spi.h>
+ #include <asm/addrspace.h>
+ #include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+@@ -1898,6 +1900,648 @@ static struct board_info __initdata boar
+ #endif /* CONFIG_BCM63XX_CPU_6362 */
+
+ /*
++ * known 6368 boards
++ */
++#ifdef CONFIG_BCM63XX_CPU_6368
++static struct board_info __initdata board_96368mvngr = {
++ .name = "96368MVNgr",
++ .expected_cpu_id = 0x6368,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "port1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "port2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "port3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "port4",
++ },
++ },
++ },
++};
++
++static struct board_info __initdata board_96368mvwg = {
++ .name = "96368MVWG",
++ .expected_cpu_id = 0x6368,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++
++ .has_usbd = 1,
++ .usbd = {
++ .use_fullspeed = 0,
++ .port_no = 0,
++ },
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "port1",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "port2",
++ },
++ [4] = {
++ .used = 1,
++ .phy_id = 0x12,
++ .name = "port0",
++ },
++ [5] = {
++ .used = 1,
++ .phy_id = 0x11,
++ .name = "port3",
++ },
++ },
++ },
++};
++
++static struct board_info __initdata board_AV4202N = {
++ .name = "96368_Swiss_S1",
++ .expected_cpu_id = 0x6368,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 2,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "port1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "port2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "port3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "port4",
++ },
++ },
++ },
++
++ .use_fallback_sprom = 1,
++ .fallback_sprom = {
++ .type = SPROM_BCM4322,
++ .pci_bus = 0,
++ .pci_dev = 1,
++ },
++};
++
++static struct board_info __initdata board_DGND3700v1_3800B = {
++ .name = "DGND3700v1_3800B",
++ .expected_cpu_id = 0x6368,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 2,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [5] = {
++ .used = 1,
++ .phy_id = 0xff,
++ .bypass_link = 1,
++ .force_speed = 1000,
++ .force_duplex_full = 1,
++ .name = "RGMII",
++ },
++ },
++ },
++};
++
++static struct sprom_fixup __initdata EVG2000_fixups[] = {
++ { .offset = 219, .value = 0xec08 },
++};
++
++static struct board_info __initdata board_EVG2000 = {
++ .name = "96369PVG",
++ .expected_cpu_id = 0x6368,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 2,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [5] = {
++ .used = 1,
++ .phy_id = 0xff,
++ .bypass_link = 1,
++ .force_speed = 1000,
++ .force_duplex_full = 1,
++ .name = "RGMII",
++ },
++ },
++ },
++
++ .use_fallback_sprom = 1,
++ .fallback_sprom = {
++ .type = SPROM_BCM4322,
++ .pci_bus = 0,
++ .pci_dev = 1,
++ .board_fixups = EVG2000_fixups,
++ .num_board_fixups = ARRAY_SIZE(EVG2000_fixups),
++ },
++};
++
++static struct board_info __initdata board_HG622 = {
++ .name = "96368MVWG_hg622",
++ .expected_cpu_id = 0x6368,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 2,
++
++ .has_caldata = 1,
++ .caldata = {
++ {
++ .vendor = PCI_VENDOR_ID_RALINK,
++ .caldata_offset = 0xfa0000,
++ .slot = 1,
++ .eeprom = "rt2x00.eeprom",
++ },
++ },
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "port1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "port2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "port3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "port4",
++ },
++ },
++ },
++};
++
++static struct board_info __initdata board_HG655b = {
++ .name = "HW65x",
++ .expected_cpu_id = 0x6368,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 2,
++
++ .has_caldata = 1,
++ .caldata = {
++ {
++ .vendor = PCI_VENDOR_ID_RALINK,
++ .caldata_offset = 0x7c0000,
++ .slot = 1,
++ .eeprom = "rt2x00.eeprom",
++ },
++ },
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "port1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "port2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "port3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "port4",
++ },
++ },
++ },
++};
++
++static struct board_info __initdata board_P870HW51A_V2 = {
++ .name = "P870HW-51a_v2",
++ .expected_cpu_id = 0x6368,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "port1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "port2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "port3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "port4",
++ },
++ },
++ },
++
++ .use_fallback_sprom = 1,
++ .fallback_sprom = {
++ .type = SPROM_BCM4318,
++ .pci_bus = 0,
++ .pci_dev = 1,
++ },
++};
++
++static struct board_info __initdata board_R1000H = {
++ .name = "R1000H",
++ .expected_cpu_id = 0x6368,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [5] = {
++ .used = 1,
++ .phy_id = 0xff,
++ .bypass_link = 1,
++ .force_speed = 1000,
++ .force_duplex_full = 1,
++ .name = "RGMII",
++ },
++ },
++ },
++};
++
++static struct sprom_fixup __initdata vh4032n_fixups[] = {
++ { .offset = 2, .value = 0x04d2 },
++ { .offset = 4, .value = 0x4350 },
++ { .offset = 65, .value = 0x1300 },
++ { .offset = 68, .value = 0x0402 },
++ { .offset = 70, .value = 0x0090 },
++ { .offset = 71, .value = 0x4c19 },
++ { .offset = 72, .value = 0x2345 },
++ { .offset = 87, .value = 0x0315 },
++ { .offset = 88, .value = 0x0315 },
++ { .offset = 96, .value = 0x2048 },
++ { .offset = 97, .value = 0xfed7 },
++ { .offset = 98, .value = 0x15a6 },
++ { .offset = 99, .value = 0xfaee },
++ { .offset = 100, .value = 0x3e3a },
++ { .offset = 101, .value = 0x3a36 },
++ { .offset = 102, .value = 0xff7f },
++ { .offset = 103, .value = 0x11b9 },
++ { .offset = 104, .value = 0xfc53 },
++ { .offset = 105, .value = 0xffe6 },
++ { .offset = 106, .value = 0xfdd2 },
++ { .offset = 107, .value = 0xfe49 },
++ { .offset = 108, .value = 0xff6a },
++ { .offset = 109, .value = 0x136e },
++ { .offset = 110, .value = 0xfbed },
++ { .offset = 111, .value = 0x0000 },
++ { .offset = 112, .value = 0x2048 },
++ { .offset = 113, .value = 0xfee2 },
++ { .offset = 114, .value = 0x15e5 },
++ { .offset = 115, .value = 0xfaed },
++ { .offset = 116, .value = 0x3e3a },
++ { .offset = 117, .value = 0x3a36 },
++ { .offset = 118, .value = 0xffc8 },
++ { .offset = 119, .value = 0x12b8 },
++ { .offset = 120, .value = 0xfca1 },
++ { .offset = 121, .value = 0xff9b },
++ { .offset = 122, .value = 0x122a },
++ { .offset = 123, .value = 0xfcc8 },
++ { .offset = 124, .value = 0xff95 },
++ { .offset = 125, .value = 0x146b },
++ { .offset = 126, .value = 0xfbba },
++ { .offset = 127, .value = 0x0000 },
++ { .offset = 161, .value = 0x0000 },
++ { .offset = 162, .value = 0x0000 },
++ { .offset = 169, .value = 0x0000 },
++ { .offset = 170, .value = 0x0000 },
++ { .offset = 171, .value = 0x0000 },
++ { .offset = 172, .value = 0x0000 },
++ { .offset = 173, .value = 0x0000 },
++ { .offset = 174, .value = 0x0000 },
++ { .offset = 175, .value = 0x0000 },
++ { .offset = 176, .value = 0x0000 },
++ { .offset = 219, .value = 0x1108 },
++};
++
++static struct board_info __initdata board_VH4032N = {
++ .name = "VH4032N",
++ .expected_cpu_id = 0x6368,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 2,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "LAN4",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "LAN3",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "LAN2",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "LAN1",
++ },
++ },
++ },
++
++ .use_fallback_sprom = 1,
++ .fallback_sprom = {
++ .type = SPROM_BCM43222,
++ .pci_bus = 0,
++ .pci_dev = 1,
++ .board_fixups = vh4032n_fixups,
++ .num_board_fixups = ARRAY_SIZE(vh4032n_fixups),
++ },
++};
++
++static struct sprom_fixup __initdata vr3025u_fixups[] = {
++ { .offset = 97, .value = 0xfeb3 },
++ { .offset = 98, .value = 0x1618 },
++ { .offset = 99, .value = 0xfab0 },
++ { .offset = 113, .value = 0xfed1 },
++ { .offset = 114, .value = 0x1609 },
++ { .offset = 115, .value = 0xfad9 },
++};
++
++static struct board_info __initdata board_VR3025u = {
++ .name = "96368M-1541N",
++ .expected_cpu_id = 0x6368,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "port1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "port2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "port3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "port4",
++ },
++ },
++ },
++
++ .use_fallback_sprom = 1,
++ .fallback_sprom = {
++ .type = SPROM_BCM43222,
++ .pci_bus = 0,
++ .pci_dev = 1,
++ .board_fixups = vr3025u_fixups,
++ .num_board_fixups = ARRAY_SIZE(vr3025u_fixups),
++ },
++};
++
++static struct sprom_fixup __initdata vr3025un_fixups[] = {
++ { .offset = 97, .value = 0xfeb3 },
++ { .offset = 98, .value = 0x1618 },
++ { .offset = 99, .value = 0xfab0 },
++ { .offset = 113, .value = 0xfed1 },
++ { .offset = 114, .value = 0x1609 },
++ { .offset = 115, .value = 0xfad9 },
++};
++
++static struct board_info __initdata board_VR3025un = {
++ .name = "96368M-1341N",
++ .expected_cpu_id = 0x6368,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "port1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "port2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "port3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "port4",
++ },
++ },
++ },
++
++ .use_fallback_sprom = 1,
++ .fallback_sprom = {
++ .type = SPROM_BCM43222,
++ .pci_bus = 0,
++ .pci_dev = 1,
++ .board_fixups = vr3025un_fixups,
++ .num_board_fixups = ARRAY_SIZE(vr3025un_fixups),
++ },
++};
++
++static struct sprom_fixup __initdata vr3026e_fixups[] = {
++ { .offset = 97, .value = 0xfeb3 },
++ { .offset = 98, .value = 0x1618 },
++ { .offset = 99, .value = 0xfab0 },
++ { .offset = 113, .value = 0xfed1 },
++ { .offset = 114, .value = 0x1609 },
++ { .offset = 115, .value = 0xfad9 },
++};
++
++static struct board_info __initdata board_VR3026e = {
++ .name = "96368MT-1341N1",
++ .expected_cpu_id = 0x6368,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "port1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "port2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "port3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "port4",
++ },
++ },
++ },
++
++ .use_fallback_sprom = 1,
++ .fallback_sprom = {
++ .type = SPROM_BCM43222,
++ .pci_bus = 0,
++ .pci_dev = 1,
++ .board_fixups = vr3026e_fixups,
++ .num_board_fixups = ARRAY_SIZE(vr3026e_fixups),
++ },
++};
++
++static struct sprom_fixup __initdata wap5813n_fixups[] = {
++ { .offset = 97, .value = 0xfeed },
++ { .offset = 98, .value = 0x15d1 },
++ { .offset = 99, .value = 0xfb0d },
++ { .offset = 113, .value = 0xfef7 },
++ { .offset = 114, .value = 0x15f7 },
++ { .offset = 115, .value = 0xfb1a },
++};
++
++static struct board_info __initdata board_WAP5813n = {
++ .name = "96369R-1231N",
++ .expected_cpu_id = 0x6368,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [4] = {
++ .used = 1,
++ .phy_id = 0xff,
++ .bypass_link = 1,
++ .force_speed = 1000,
++ .force_duplex_full = 1,
++ .name = "RGMII",
++ },
++ },
++ },
++
++ .use_fallback_sprom = 1,
++ .fallback_sprom = {
++ .type = SPROM_BCM43222,
++ .pci_bus = 0,
++ .pci_dev = 1,
++ .board_fixups = wap5813n_fixups,
++ .num_board_fixups = ARRAY_SIZE(wap5813n_fixups),
++ },
++};
++#endif /* CONFIG_BCM63XX_CPU_6368 */
++
++/*
+ * all boards
+ */
+ static const struct board_info __initconst *bcm963xx_boards[] = {
+@@ -1982,6 +2626,22 @@ static const struct board_info __initcon
+ &board_hg253s_v2,
+ &board_nb6,
+ #endif /* CONFIG_BCM63XX_CPU_6362 */
++#ifdef CONFIG_BCM63XX_CPU_6368
++ &board_96368mvngr,
++ &board_96368mvwg,
++ &board_AV4202N,
++ &board_DGND3700v1_3800B,
++ &board_EVG2000,
++ &board_HG622,
++ &board_HG655b,
++ &board_P870HW51A_V2,
++ &board_R1000H,
++ &board_VH4032N,
++ &board_VR3025u,
++ &board_VR3025un,
++ &board_VR3026e,
++ &board_WAP5813n,
++#endif /* CONFIG_BCM63XX_CPU_6368 */
+ };
+
+ static struct of_device_id const bcm963xx_boards_dt[] = {
+@@ -2078,6 +2738,20 @@ static struct of_device_id const bcm963x
+ { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, },
+ #endif /* CONFIG_BCM63XX_CPU_6362 */
+ #ifdef CONFIG_BCM63XX_CPU_6368
++ { .compatible = "actiontec,r1000h", .data = &board_R1000H, },
++ { .compatible = "adb,av4202n", .data = &board_AV4202N, },
++ { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
++ { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
++ { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
++ { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
++ { .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, },
++ { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
++ { .compatible = "huawei,echolife-hg622", .data = &board_HG622, },
++ { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, },
++ { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
++ { .compatible = "netgear,evg2000", .data = &board_EVG2000, },
++ { .compatible = "observa,vh4032n", .data = &board_VH4032N, },
++ { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
+ #endif /* CONFIG_BCM63XX_CPU_6368 */
+ #ifdef CONFIG_BCM63XX_CPU_63268
+ #endif /* CONFIG_BCM63XX_CPU_63268 */
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -81,12 +81,25 @@ void __init board_early_setup(const stru
+ bcm63xx_pci_enabled = 1;
+ if (BCMCPU_IS_6348())
+ val |= GPIO_MODE_6348_G2_PCI;
++
++ if (BCMCPU_IS_6368())
++ val |= GPIO_MODE_6368_PCI_REQ1 |
++ GPIO_MODE_6368_PCI_GNT1 |
++ GPIO_MODE_6368_PCI_INTB |
++ GPIO_MODE_6368_PCI_REQ0 |
++ GPIO_MODE_6368_PCI_GNT0;
+ }
+ #endif
+
+ if (board.has_pccard) {
+ if (BCMCPU_IS_6348())
+ val |= GPIO_MODE_6348_G1_MII_PCCARD;
++
++ if (BCMCPU_IS_6368())
++ val |= GPIO_MODE_6368_PCMCIA_CD1 |
++ GPIO_MODE_6368_PCMCIA_CD2 |
++ GPIO_MODE_6368_PCMCIA_VS1 |
++ GPIO_MODE_6368_PCMCIA_VS2;
+ }
+
+ if (board.has_enet0 && !board.enet0.use_internal_phy) {
diff --git a/target/linux/bcm63xx/patches-5.4/519-board_bcm63268.patch b/target/linux/bcm63xx/patches-5.4/519-board_bcm63268.patch
new file mode 100644
index 0000000000..2718bbdd36
--- /dev/null
+++ b/target/linux/bcm63xx/patches-5.4/519-board_bcm63268.patch
@@ -0,0 +1,307 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2542,6 +2542,273 @@ static struct board_info __initdata boar
+ #endif /* CONFIG_BCM63XX_CPU_6368 */
+
+ /*
++ * known 63268/63269 boards
++ */
++#ifdef CONFIG_BCM63XX_CPU_63268
++static struct board_info __initdata board_963268bu_p300 = {
++ .name = "963268BU_P300",
++ .expected_cpu_id = 0x63268,
++
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 1,
++
++ .has_usbd = 1,
++ .usbd = {
++ .use_fullspeed = 0,
++ .port_no = 0,
++ },
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 17,
++ .name = "FE1",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "GbE2",
++ },
++ [4] = {
++ .used = 1,
++ .phy_id = 0,
++ .name = "GbE3",
++ .mii_override = 1,
++ .timing_sel = 1,
++ },
++ [5] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "GbE1",
++ .mii_override = 1,
++ .timing_sel = 1,
++ },
++ [6] = {
++ .used = 1,
++ .phy_id = 24,
++ .name = "GbE4",
++ .mii_override = 1,
++ .timing_sel = 1,
++ },
++ [7] = {
++ .used = 1,
++ .phy_id = 25,
++ .name = "GbE5",
++ .mii_override = 1,
++ .timing_sel = 1,
++ },
++ },
++ },
++};
++
++static struct board_info __initdata board_963269bhr = {
++ .name = "963269BHR",
++ .expected_cpu_id = 0x63268,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "port1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "port2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "port3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "port4",
++ },
++ },
++ },
++};
++
++static struct board_info __initdata board_BSKYB_63168 = {
++ .name = "BSKYB_63168",
++ .expected_cpu_id = 0x63268,
++
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 2,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "Port 1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "Port 2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "Port 3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "Port 4",
++ },
++ },
++ },
++};
++
++static struct board_info __initdata board_H500s = {
++ .name = "BXK00C-1.6",
++ .expected_cpu_id = 0x63268,
++
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 1,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [3] = {
++ .used = 1,
++ .phy_id = 12,
++ .name = "WAN",
++ },
++ [4] = {
++ .used = 1,
++ .phy_id = 0,
++ .bypass_link = 1,
++ .force_speed = 1000,
++ .force_duplex_full = 1,
++ .mii_override = 1,
++ .timing_sel = 1,
++ .name = "RGMII",
++ },
++ },
++ },
++};
++
++static struct board_info __initdata board_VG8050 = {
++ .name = "963169P-1861N5",
++ .expected_cpu_id = 0x63268,
++
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 2,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [6] = {
++ .used = 1,
++ .phy_id = 0xff,
++ .bypass_link = 1,
++ .force_speed = 1000,
++ .force_duplex_full = 1,
++ .mii_override = 1,
++ .timing_sel = 1,
++ .name = "RGMII",
++ },
++ },
++ },
++};
++
++static struct board_info __initdata board_VR3032u = {
++ .name = "963168M-1841N1",
++ .expected_cpu_id = 0x63268,
++
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 1,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "LAN2",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "LAN3",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "LAN4",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "LAN1",
++ },
++ },
++ },
++};
++
++static struct board_info __initdata board_vw6339gu = {
++ .name = "VW6339GU",
++ .expected_cpu_id = 0x63268,
++
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 1,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "LAN2",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "LAN3",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "LAN4",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "LAN1",
++ },
++ [4] = {
++ .used = 1,
++ .phy_id = 7,
++ .name = "WAN",
++ .mii_override = 1,
++ .timing_sel = 1,
++ },
++ },
++ },
++};
++#endif /* CONFIG_BCM63XX_CPU_63268 */
++
++/*
+ * all boards
+ */
+ static const struct board_info __initconst *bcm963xx_boards[] = {
+@@ -2642,6 +2909,15 @@ static const struct board_info __initcon
+ &board_VR3026e,
+ &board_WAP5813n,
+ #endif /* CONFIG_BCM63XX_CPU_6368 */
++#ifdef CONFIG_BCM63XX_CPU_63268
++ &board_963268bu_p300,
++ &board_963269bhr,
++ &board_BSKYB_63168,
++ &board_H500s,
++ &board_VG8050,
++ &board_VR3032u,
++ &board_vw6339gu,
++#endif /* CONFIG_BCM63XX_CPU_63268 */
+ };
+
+ static struct of_device_id const bcm963xx_boards_dt[] = {
+@@ -2754,6 +3030,14 @@ static struct of_device_id const bcm963x
+ { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
+ #endif /* CONFIG_BCM63XX_CPU_6368 */
+ #ifdef CONFIG_BCM63XX_CPU_63268
++ { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, },
++ { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
++ { .compatible = "comtrend,vg-8050", .data = &board_VG8050, },
++ { .compatible = "comtrend,vr-3032u", .data = &board_VR3032u, },
++ { .compatible = "inteno,vg50", .data = &board_vw6339gu, },
++ { .compatible = "sercomm,h500-s-lowi", .data = &board_H500s, },
++ { .compatible = "sercomm,h500-s-vfes", .data = &board_H500s, },
++ { .compatible = "sky,sr102", .data = &board_BSKYB_63168, },
+ #endif /* CONFIG_BCM63XX_CPU_63268 */
+ #endif /* CONFIG_OF */
+ { },
diff --git a/target/linux/bcm63xx/patches-5.4/522-MIPS-BCM63XX-add-963281TAN-reference-board.patch b/target/linux/bcm63xx/patches-5.4/522-MIPS-BCM63XX-add-963281TAN-reference-board.patch
deleted file mode 100644
index a6f4a84336..0000000000
--- a/target/linux/bcm63xx/patches-5.4/522-MIPS-BCM63XX-add-963281TAN-reference-board.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From f0649f7b7c672cf452a1796a1422bf615e1973f8 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski at gmail.com>
-Date: Tue, 29 May 2012 11:01:12 +0200
-Subject: [PATCH] MIPS: BCM63XX: add 963281TAN reference board
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 71 +++++++++++++++++++++++++++++
- 1 files changed, 71 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -348,6 +348,39 @@ static struct board_info __initdata boar
- },
- },
- };
-+
-+static struct board_info __initdata board_963281TAN = {
-+ .name = "963281TAN",
-+ .expected_cpu_id = 0x6328,
-+
-+ .has_pci = 1,
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "Port 1",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "Port 2",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "Port 3",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "Port 4",
-+ },
-+ },
-+ },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6328 */
-
- /*
-@@ -702,6 +735,7 @@ static const struct board_info __initcon
- #endif /* CONFIG_BCM63XX_CPU_6318 */
- #ifdef CONFIG_BCM63XX_CPU_6328
- &board_96328avng,
-+ &board_963281TAN,
- #endif /* CONFIG_BCM63XX_CPU_6328 */
- #ifdef CONFIG_BCM63XX_CPU_6338
- &board_96338gw,
-@@ -741,6 +775,7 @@ static struct of_device_id const bcm963x
- { .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, },
- #endif /* CONFIG_BCM63XX_CPU_6318 */
- #ifdef CONFIG_BCM63XX_CPU_6328
-+ { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
- { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
- #endif /* CONFIG_BCM63XX_CPU_6328 */
- #ifdef CONFIG_BCM63XX_CPU_6338
diff --git a/target/linux/bcm63xx/patches-5.4/523-board_bcm6328-d-link-dsl-274xb-f.patch b/target/linux/bcm63xx/patches-5.4/523-board_bcm6328-d-link-dsl-274xb-f.patch
deleted file mode 100644
index 97f71e115a..0000000000
--- a/target/linux/bcm63xx/patches-5.4/523-board_bcm6328-d-link-dsl-274xb-f.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From 66808f706b3dcd83a9f5157997ff478a880a2906 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski at gmail.com>
-Date: Mon, 30 Apr 2012 09:10:51 +0200
-Subject: [PATCH 70/79] MIPS: BCM63XX: Add board definition for D-Link
- DSL-274xB rev F1
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 104 +++++++++++++++++++++++++++++
- 1 files changed, 104 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -381,6 +381,50 @@ static struct board_info __initdata boar
- },
- },
- };
-+
-+static struct board_info __initdata board_dsl_274xb_f1 = {
-+ .name = "AW4339U",
-+ .expected_cpu_id = 0x6328,
-+
-+ .has_pci = 1,
-+
-+ .has_caldata = 1,
-+ .caldata = {
-+ {
-+ .vendor = PCI_VENDOR_ID_ATHEROS,
-+ .caldata_offset = 0x7d1000,
-+ .slot = 0,
-+ .led_pin = -1,
-+ .led_active_high = 1,
-+ },
-+ },
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "Port 4",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "Port 3",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "Port 2",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "Port 1",
-+ },
-+ },
-+ },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6328 */
-
- /*
-@@ -736,6 +780,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6328
- &board_96328avng,
- &board_963281TAN,
-+ &board_dsl_274xb_f1,
- #endif /* CONFIG_BCM63XX_CPU_6328 */
- #ifdef CONFIG_BCM63XX_CPU_6338
- &board_96338gw,
-@@ -777,6 +822,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6328
- { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
- { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
-+ { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
- #endif /* CONFIG_BCM63XX_CPU_6328 */
- #ifdef CONFIG_BCM63XX_CPU_6338
- { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
diff --git a/target/linux/bcm63xx/patches-5.4/524-board_bcm6328-adb-a4001n1.patch b/target/linux/bcm63xx/patches-5.4/524-board_bcm6328-adb-a4001n1.patch
deleted file mode 100644
index 065f2df164..0000000000
--- a/target/linux/bcm63xx/patches-5.4/524-board_bcm6328-adb-a4001n1.patch
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -382,6 +382,49 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct board_info __initdata board_A4001N1 = {
-+ .name = "963281T_TEF",
-+ .expected_cpu_id = 0x6328,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 1,
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "Port 1",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "Port 2",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "Port 3",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "Port 4",
-+ },
-+ },
-+ },
-+
-+ .use_fallback_sprom = 1,
-+ .fallback_sprom = {
-+ .type = SPROM_BCM43225,
-+ .pci_bus = 1,
-+ .pci_dev = 0,
-+ },
-+};
-+
- static struct board_info __initdata board_dsl_274xb_f1 = {
- .name = "AW4339U",
- .expected_cpu_id = 0x6328,
-@@ -780,6 +823,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6328
- &board_96328avng,
- &board_963281TAN,
-+ &board_A4001N1,
- &board_dsl_274xb_f1,
- #endif /* CONFIG_BCM63XX_CPU_6328 */
- #ifdef CONFIG_BCM63XX_CPU_6338
-@@ -820,6 +864,7 @@ static struct of_device_id const bcm963x
- { .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, },
- #endif /* CONFIG_BCM63XX_CPU_6318 */
- #ifdef CONFIG_BCM63XX_CPU_6328
-+ { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
- { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
- { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
- { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
diff --git a/target/linux/bcm63xx/patches-5.4/525-board_bcm6328-comtrend-ar-5387un.patch b/target/linux/bcm63xx/patches-5.4/525-board_bcm6328-comtrend-ar-5387un.patch
deleted file mode 100644
index 99a026f9d5..0000000000
--- a/target/linux/bcm63xx/patches-5.4/525-board_bcm6328-comtrend-ar-5387un.patch
+++ /dev/null
@@ -1,97 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -349,6 +349,78 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct sprom_fixup __initdata ar5387un_fixups[] = {
-+ { .offset = 2, .value = 0x05bb },
-+ { .offset = 65, .value = 0x1204 },
-+ { .offset = 78, .value = 0x0303 },
-+ { .offset = 79, .value = 0x0202 },
-+ { .offset = 80, .value = 0xff02 },
-+ { .offset = 87, .value = 0x0315 },
-+ { .offset = 88, .value = 0x0315 },
-+ { .offset = 96, .value = 0x2048 },
-+ { .offset = 97, .value = 0xff11 },
-+ { .offset = 98, .value = 0x1567 },
-+ { .offset = 99, .value = 0xfb24 },
-+ { .offset = 100, .value = 0x3e3c },
-+ { .offset = 101, .value = 0x4038 },
-+ { .offset = 102, .value = 0xfe7f },
-+ { .offset = 103, .value = 0x1279 },
-+ { .offset = 112, .value = 0x2048 },
-+ { .offset = 113, .value = 0xff03 },
-+ { .offset = 114, .value = 0x154c },
-+ { .offset = 115, .value = 0xfb27 },
-+ { .offset = 116, .value = 0x3e3c },
-+ { .offset = 117, .value = 0x4038 },
-+ { .offset = 118, .value = 0xfe87 },
-+ { .offset = 119, .value = 0x1233 },
-+ { .offset = 203, .value = 0x2226 },
-+};
-+
-+static struct board_info __initdata board_AR5387un = {
-+ .name = "96328A-1441N1",
-+ .expected_cpu_id = 0x6328,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 1,
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "Port 1",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "Port 2",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "Port 3",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "Port 4",
-+ },
-+ },
-+ },
-+
-+ .use_fallback_sprom = 1,
-+ .fallback_sprom = {
-+ .type = SPROM_BCM43225,
-+ .pci_bus = 1,
-+ .pci_dev = 0,
-+ .board_fixups = ar5387un_fixups,
-+ .num_board_fixups = ARRAY_SIZE(ar5387un_fixups),
-+ },
-+};
-+
- static struct board_info __initdata board_963281TAN = {
- .name = "963281TAN",
- .expected_cpu_id = 0x6328,
-@@ -822,6 +894,7 @@ static const struct board_info __initcon
- #endif /* CONFIG_BCM63XX_CPU_6318 */
- #ifdef CONFIG_BCM63XX_CPU_6328
- &board_96328avng,
-+ &board_AR5387un,
- &board_963281TAN,
- &board_A4001N1,
- &board_dsl_274xb_f1,
-@@ -867,6 +940,7 @@ static struct of_device_id const bcm963x
- { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
- { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
- { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
-+ { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
- { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
- #endif /* CONFIG_BCM63XX_CPU_6328 */
- #ifdef CONFIG_BCM63XX_CPU_6338
diff --git a/target/linux/bcm63xx/patches-5.4/526-board_bcm6328-comtrend-ar-5381u.patch b/target/linux/bcm63xx/patches-5.4/526-board_bcm6328-comtrend-ar-5381u.patch
deleted file mode 100644
index 8ed555490b..0000000000
--- a/target/linux/bcm63xx/patches-5.4/526-board_bcm6328-comtrend-ar-5381u.patch
+++ /dev/null
@@ -1,79 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -349,6 +349,60 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct sprom_fixup __initdata ar5381u_fixups[] = {
-+ { .offset = 97, .value = 0xfee5 },
-+ { .offset = 98, .value = 0x157c },
-+ { .offset = 99, .value = 0xfae7 },
-+ { .offset = 113, .value = 0xfefa },
-+ { .offset = 114, .value = 0x15d6 },
-+ { .offset = 115, .value = 0xfaf8 },
-+};
-+
-+static struct board_info __initdata board_AR5381u = {
-+ .name = "96328A-1241N",
-+ .expected_cpu_id = 0x6328,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 1,
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "Port 1",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "Port 2",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "Port 3",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "Port 4",
-+ },
-+ },
-+ },
-+
-+ .use_fallback_sprom = 1,
-+ .fallback_sprom = {
-+ .type = SPROM_BCM43225,
-+ .pci_bus = 1,
-+ .pci_dev = 0,
-+ .board_fixups = ar5381u_fixups,
-+ .num_board_fixups = ARRAY_SIZE(ar5381u_fixups),
-+ },
-+};
-+
- static struct sprom_fixup __initdata ar5387un_fixups[] = {
- { .offset = 2, .value = 0x05bb },
- { .offset = 65, .value = 0x1204 },
-@@ -894,6 +948,7 @@ static const struct board_info __initcon
- #endif /* CONFIG_BCM63XX_CPU_6318 */
- #ifdef CONFIG_BCM63XX_CPU_6328
- &board_96328avng,
-+ &board_AR5381u,
- &board_AR5387un,
- &board_963281TAN,
- &board_A4001N1,
-@@ -940,6 +995,7 @@ static struct of_device_id const bcm963x
- { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
- { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
- { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
-+ { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, },
- { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
- { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
- #endif /* CONFIG_BCM63XX_CPU_6328 */
diff --git a/target/linux/bcm63xx/patches-5.4/527-board_bcm6328-sagem-fast-2704-v2.patch b/target/linux/bcm63xx/patches-5.4/527-board_bcm6328-sagem-fast-2704-v2.patch
deleted file mode 100644
index 4828c8e50c..0000000000
--- a/target/linux/bcm63xx/patches-5.4/527-board_bcm6328-sagem-fast-2704-v2.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From: Marcin Jurkowski <marcin1j at gmail.com>
-Date: Thu, 31 Oct 2013 22:33:10 +0000
-Subject: [PATCH] bcm63xx: Add kernel support for Sagemcom F at ST2704V2 ADSL
- router
-
-This adds kernel support support for Sagemcom F at st 2704 wireless ADSL
-router.
-It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+
-modem equipped with 64 MiB RAM and 8 MiB flash.
-
-Signed-off-by: Marcin Jurkowski <marcin1j at gmail.com>
----
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -594,6 +594,42 @@ static struct board_info __initdata boar
- },
- },
- };
-+
-+static struct board_info __initdata board_FAST2704V2 = {
-+ .name = "F at ST2704V2",
-+ .expected_cpu_id = 0x6328,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .has_usbd = 1,
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "Port 1",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "Port 2",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "Port 3",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "Port 4",
-+ },
-+ },
-+ },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6328 */
-
- /*
-@@ -953,6 +989,7 @@ static const struct board_info __initcon
- &board_963281TAN,
- &board_A4001N1,
- &board_dsl_274xb_f1,
-+ &board_FAST2704V2,
- #endif /* CONFIG_BCM63XX_CPU_6328 */
- #ifdef CONFIG_BCM63XX_CPU_6338
- &board_96338gw,
-@@ -998,6 +1035,7 @@ static struct of_device_id const bcm963x
- { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, },
- { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
- { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
-+ { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, },
- #endif /* CONFIG_BCM63XX_CPU_6328 */
- #ifdef CONFIG_BCM63XX_CPU_6338
- { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
diff --git a/target/linux/bcm63xx/patches-5.4/528-board_bcm6328-adb-a4001n.patch b/target/linux/bcm63xx/patches-5.4/528-board_bcm6328-adb-a4001n.patch
deleted file mode 100644
index da2200652e..0000000000
--- a/target/linux/bcm63xx/patches-5.4/528-board_bcm6328-adb-a4001n.patch
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -508,6 +508,49 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct board_info __initdata board_A4001N = {
-+ .name = "96328dg2x2",
-+ .expected_cpu_id = 0x6328,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 1,
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "Port 1",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "Port 2",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "Port 3",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "Port 4",
-+ },
-+ },
-+ },
-+
-+ .use_fallback_sprom = 1,
-+ .fallback_sprom = {
-+ .type = SPROM_BCM43225,
-+ .pci_bus = 1,
-+ .pci_dev = 0,
-+ },
-+};
-+
- static struct board_info __initdata board_A4001N1 = {
- .name = "963281T_TEF",
- .expected_cpu_id = 0x6328,
-@@ -987,6 +1030,7 @@ static const struct board_info __initcon
- &board_AR5381u,
- &board_AR5387un,
- &board_963281TAN,
-+ &board_A4001N,
- &board_A4001N1,
- &board_dsl_274xb_f1,
- &board_FAST2704V2,
-@@ -1029,6 +1073,7 @@ static struct of_device_id const bcm963x
- { .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, },
- #endif /* CONFIG_BCM63XX_CPU_6318 */
- #ifdef CONFIG_BCM63XX_CPU_6328
-+ { .compatible = "adb,a4001n", .data = &board_A4001N, },
- { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
- { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
- { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
diff --git a/target/linux/bcm63xx/patches-5.4/529-board_bcm6328-nucom-r5010un-v2.patch b/target/linux/bcm63xx/patches-5.4/529-board_bcm6328-nucom-r5010un-v2.patch
deleted file mode 100644
index 4f63f23cda..0000000000
--- a/target/linux/bcm63xx/patches-5.4/529-board_bcm6328-nucom-r5010un-v2.patch
+++ /dev/null
@@ -1,69 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -673,6 +673,50 @@ static struct board_info __initdata boar
- },
- },
- };
-+
-+static struct board_info __initdata board_R5010UNV2 = {
-+ .name = "96328ang",
-+ .expected_cpu_id = 0x6328,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 1,
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "Port 1",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "Port 2",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "Port 3",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "Port 4",
-+ },
-+ },
-+ },
-+
-+ .use_fallback_sprom = 1,
-+ .fallback_sprom = {
-+ .type = SPROM_BCM43217,
-+ .pci_bus = 1,
-+ .pci_dev = 0,
-+ },
-+};
-+
- #endif /* CONFIG_BCM63XX_CPU_6328 */
-
- /*
-@@ -1034,6 +1078,7 @@ static const struct board_info __initcon
- &board_A4001N1,
- &board_dsl_274xb_f1,
- &board_FAST2704V2,
-+ &board_R5010UNV2,
- #endif /* CONFIG_BCM63XX_CPU_6328 */
- #ifdef CONFIG_BCM63XX_CPU_6338
- &board_96338gw,
-@@ -1080,6 +1125,7 @@ static struct of_device_id const bcm963x
- { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, },
- { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
- { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
-+ { .compatible = "nucom,r5010un-v2", .data = &board_R5010UNV2, },
- { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, },
- #endif /* CONFIG_BCM63XX_CPU_6328 */
- #ifdef CONFIG_BCM63XX_CPU_6338
diff --git a/target/linux/bcm63xx/patches-5.4/530-board_bcm6328-sercomm-ad1018.patch b/target/linux/bcm63xx/patches-5.4/530-board_bcm6328-sercomm-ad1018.patch
deleted file mode 100644
index 409f3d8e26..0000000000
--- a/target/linux/bcm63xx/patches-5.4/530-board_bcm6328-sercomm-ad1018.patch
+++ /dev/null
@@ -1,91 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -349,6 +349,71 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct sprom_fixup __initdata ad1018_fixups[] = {
-+ { .offset = 6, .value = 0x1c00 },
-+ { .offset = 65, .value = 0x1256 },
-+ { .offset = 96, .value = 0x2046 },
-+ { .offset = 97, .value = 0xfe69 },
-+ { .offset = 98, .value = 0x1726 },
-+ { .offset = 99, .value = 0xfa5c },
-+ { .offset = 112, .value = 0x2046 },
-+ { .offset = 113, .value = 0xfea8 },
-+ { .offset = 114, .value = 0x1978 },
-+ { .offset = 115, .value = 0xfa26 },
-+ { .offset = 161, .value = 0x2222 },
-+ { .offset = 169, .value = 0x2222 },
-+ { .offset = 171, .value = 0x2222 },
-+ { .offset = 173, .value = 0x2222 },
-+ { .offset = 174, .value = 0x4444 },
-+ { .offset = 175, .value = 0x2222 },
-+ { .offset = 176, .value = 0x4444 },
-+};
-+
-+static struct board_info __initdata board_AD1018 = {
-+ .name = "96328avngr",
-+ .expected_cpu_id = 0x6328,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 1,
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "FIBRE",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "LAN3",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "LAN2",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "LAN1",
-+ },
-+ },
-+ },
-+
-+ .use_fallback_sprom = 1,
-+ .fallback_sprom = {
-+ .type = SPROM_BCM43217,
-+ .pci_bus = 1,
-+ .pci_dev = 0,
-+ .board_fixups = ad1018_fixups,
-+ .num_board_fixups = ARRAY_SIZE(ad1018_fixups),
-+ },
-+};
-+
- static struct sprom_fixup __initdata ar5381u_fixups[] = {
- { .offset = 97, .value = 0xfee5 },
- { .offset = 98, .value = 0x157c },
-@@ -1071,6 +1136,7 @@ static const struct board_info __initcon
- #endif /* CONFIG_BCM63XX_CPU_6318 */
- #ifdef CONFIG_BCM63XX_CPU_6328
- &board_96328avng,
-+ &board_AD1018,
- &board_AR5381u,
- &board_AR5387un,
- &board_963281TAN,
-@@ -1127,6 +1193,8 @@ static struct of_device_id const bcm963x
- { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
- { .compatible = "nucom,r5010un-v2", .data = &board_R5010UNV2, },
- { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, },
-+ { .compatible = "sercomm,ad1018", .data = &board_AD1018, },
-+ { .compatible = "sercomm,ad1018-nor", .data = &board_AD1018, },
- #endif /* CONFIG_BCM63XX_CPU_6328 */
- #ifdef CONFIG_BCM63XX_CPU_6338
- { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
diff --git a/target/linux/bcm63xx/patches-5.4/531-board-bcm6328-adb-pdg-a4001n-a-000-1a1-ax.patch b/target/linux/bcm63xx/patches-5.4/531-board-bcm6328-adb-pdg-a4001n-a-000-1a1-ax.patch
deleted file mode 100644
index 3b08649bbc..0000000000
--- a/target/linux/bcm63xx/patches-5.4/531-board-bcm6328-adb-pdg-a4001n-a-000-1a1-ax.patch
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -616,6 +616,49 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct board_info __initdata board_PDG_A4001N_A_000_1A1_AX = {
-+ .name = "96328avng",
-+ .expected_cpu_id = 0x6328,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 1,
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "Port 1",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "Port 2",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "Port 3",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "Port 4",
-+ },
-+ },
-+ },
-+
-+ .use_fallback_sprom = 1,
-+ .fallback_sprom = {
-+ .type = SPROM_BCM43225,
-+ .pci_bus = 1,
-+ .pci_dev = 0,
-+ },
-+};
-+
- static struct board_info __initdata board_A4001N1 = {
- .name = "963281T_TEF",
- .expected_cpu_id = 0x6328,
-@@ -1141,6 +1184,7 @@ static const struct board_info __initcon
- &board_AR5387un,
- &board_963281TAN,
- &board_A4001N,
-+ &board_PDG_A4001N_A_000_1A1_AX,
- &board_A4001N1,
- &board_dsl_274xb_f1,
- &board_FAST2704V2,
-@@ -1186,6 +1230,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6328
- { .compatible = "adb,a4001n", .data = &board_A4001N, },
- { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
-+ { .compatible = "adb,pdg-a4001n-a-000-1a1-ax", .data = &board_PDG_A4001N_A_000_1A1_AX, },
- { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
- { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
- { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, },
diff --git a/target/linux/bcm63xx/patches-5.4/565-board_bcm6348-bt-voyager-2500v-bb.patch b/target/linux/bcm63xx/patches-5.4/531-board_bcm6348-bt-voyager-2500v-bb.patch
similarity index 54%
rename from target/linux/bcm63xx/patches-5.4/565-board_bcm6348-bt-voyager-2500v-bb.patch
rename to target/linux/bcm63xx/patches-5.4/531-board_bcm6348-bt-voyager-2500v-bb.patch
index 6536e17798..750deb6da0 100644
--- a/target/linux/bcm63xx/patches-5.4/565-board_bcm6348-bt-voyager-2500v-bb.patch
+++ b/target/linux/bcm63xx/patches-5.4/531-board_bcm6348-bt-voyager-2500v-bb.patch
@@ -1,50 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1202,6 +1202,27 @@ static struct board_info __initdata boar
- .force_duplex_full = 1,
- },
- };
-+
-+static struct board_info __initdata board_V2500V_BB = {
-+ .name = "V2500V_BB",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_pci = 1,
-+
-+ .has_enet0 = 1,
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+
-+ .has_enet1 = 1,
-+ .enet1 = {
-+ .has_phy = 1,
-+ .phy_id = 0,
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6348 */
-
- /*
-@@ -1362,6 +1383,7 @@ static const struct board_info __initcon
- &board_96348_D4PW,
- &board_spw500v,
- &board_96348sv,
-+ &board_V2500V_BB,
- #endif /* CONFIG_BCM63XX_CPU_6348 */
- #ifdef CONFIG_BCM63XX_CPU_6358
- &board_96358vw,
-@@ -1414,6 +1436,7 @@ static struct of_device_id const bcm963x
- { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
- { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
- { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
-+ { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, },
- { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
- { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
- { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
-@@ -1469,6 +1492,22 @@ void __init board_bcm963xx_init(void)
+@@ -3066,6 +3066,22 @@ void __init board_bcm963xx_init(void)
val &= MPI_CSBASE_BASE_MASK;
}
boot_addr = (u8 *)KSEG1ADDR(val);
diff --git a/target/linux/bcm63xx/patches-5.4/567-MIPS-BCM63XX-add-inventel-Livebox-support.patch b/target/linux/bcm63xx/patches-5.4/532-MIPS-BCM63XX-add-inventel-Livebox-support.patch
similarity index 100%
rename from target/linux/bcm63xx/patches-5.4/567-MIPS-BCM63XX-add-inventel-Livebox-support.patch
rename to target/linux/bcm63xx/patches-5.4/532-MIPS-BCM63XX-add-inventel-Livebox-support.patch
diff --git a/target/linux/bcm63xx/patches-5.4/542-board_bcm6338-dynalink-rta1320.patch b/target/linux/bcm63xx/patches-5.4/542-board_bcm6338-dynalink-rta1320.patch
deleted file mode 100644
index d3b048a6ac..0000000000
--- a/target/linux/bcm63xx/patches-5.4/542-board_bcm6338-dynalink-rta1320.patch
+++ /dev/null
@@ -1,38 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -871,6 +871,19 @@ static struct board_info __initdata boar
- .force_duplex_full = 1,
- },
- };
-+
-+static struct board_info __initdata board_rta1320_16m = {
-+ .name = "RTA1320_16M",
-+ .expected_cpu_id = 0x6338,
-+
-+ .has_enet0 = 1,
-+ .enet0 = {
-+ .has_phy = 1,
-+ .phy_id = 0,
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6338 */
-
- /*
-@@ -1207,6 +1220,7 @@ static const struct board_info __initcon
- &board_96338gw,
- &board_96338w,
- &board_96338w2_e7t,
-+ &board_rta1320_16m,
- #endif /* CONFIG_BCM63XX_CPU_6338 */
- #ifdef CONFIG_BCM63XX_CPU_6345
- &board_96345gw2,
-@@ -1258,6 +1272,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6338
- { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
- { .compatible = "brcm,bcm96338w", .data = &board_96338w, },
-+ { .compatible = "dynalink,rta1320", .data = &board_rta1320_16m, },
- { .compatible = "d-link,dsl-2640u", .data = &board_96338w2_e7t, },
- #endif /* CONFIG_BCM63XX_CPU_6338 */
- #ifdef CONFIG_BCM63XX_CPU_6345
diff --git a/target/linux/bcm63xx/patches-5.4/561-board-bcm6348-D4PW.patch b/target/linux/bcm63xx/patches-5.4/561-board-bcm6348-D4PW.patch
deleted file mode 100644
index 62e8f381c1..0000000000
--- a/target/linux/bcm63xx/patches-5.4/561-board-bcm6348-D4PW.patch
+++ /dev/null
@@ -1,40 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1093,6 +1093,21 @@ static struct board_info __initdata boar
-
- .has_ohci0 = 1,
- };
-+
-+static struct board_info __initdata board_96348_D4PW = {
-+ .name = "D-4P-W",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_pci = 1,
-+
-+ .has_enet1 = 1,
-+ .enet1 = {
-+ .has_phy = 1,
-+ .phy_id = 0,
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6348 */
-
- /*
-@@ -1248,6 +1263,7 @@ static const struct board_info __initcon
- &board_DV201AMR,
- &board_96348gw_a,
- &board_rta1025w_16,
-+ &board_96348_D4PW,
- #endif /* CONFIG_BCM63XX_CPU_6348 */
- #ifdef CONFIG_BCM63XX_CPU_6358
- &board_96358vw,
-@@ -1300,6 +1316,7 @@ static struct of_device_id const bcm963x
- { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
- { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
- { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
-+ { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
- { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
- { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
- { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
diff --git a/target/linux/bcm63xx/patches-5.4/562-board_bcm6348-t-com-speedport-w-500v.patch b/target/linux/bcm63xx/patches-5.4/562-board_bcm6348-t-com-speedport-w-500v.patch
deleted file mode 100644
index a20047d3d3..0000000000
--- a/target/linux/bcm63xx/patches-5.4/562-board_bcm6348-t-com-speedport-w-500v.patch
+++ /dev/null
@@ -1,55 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1108,6 +1108,36 @@ static struct board_info __initdata boar
- .force_duplex_full = 1,
- },
- };
-+
-+static struct sprom_fixup __initdata spw500v_fixups[] = {
-+ { .offset = 46, .value = 0x3046 },
-+ { .offset = 47, .value = 0x15a7 },
-+ { .offset = 48, .value = 0xfa89 },
-+ { .offset = 49, .value = 0xfe79 },
-+ { .offset = 57, .value = 0x6a49 },
-+};
-+
-+static struct board_info __initdata board_spw500v = {
-+ .name = "SPW500V",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_pci = 1,
-+
-+ .has_enet0 = 1,
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+
-+ .use_fallback_sprom = 1,
-+ .fallback_sprom = {
-+ .type = SPROM_BCM4318,
-+ .pci_bus = 0,
-+ .pci_dev = 1,
-+ .board_fixups = spw500v_fixups,
-+ .num_board_fixups = ARRAY_SIZE(spw500v_fixups),
-+ },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6348 */
-
- /*
-@@ -1264,6 +1294,7 @@ static const struct board_info __initcon
- &board_96348gw_a,
- &board_rta1025w_16,
- &board_96348_D4PW,
-+ &board_spw500v,
- #endif /* CONFIG_BCM63XX_CPU_6348 */
- #ifdef CONFIG_BCM63XX_CPU_6358
- &board_96358vw,
-@@ -1321,6 +1352,7 @@ static struct of_device_id const bcm963x
- { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
- { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
- { .compatible = "sagem,fast-2404", .data = &board_FAST2404, },
-+ { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
- { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
- { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },
- #endif /* CONFIG_BCM63XX_CPU_6348 */
diff --git a/target/linux/bcm63xx/patches-5.4/563-board_bcm6348-tecom-gw6000-gw6200.patch b/target/linux/bcm63xx/patches-5.4/563-board_bcm6348-tecom-gw6000-gw6200.patch
deleted file mode 100644
index 3d9c000803..0000000000
--- a/target/linux/bcm63xx/patches-5.4/563-board_bcm6348-tecom-gw6000-gw6200.patch
+++ /dev/null
@@ -1,67 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1002,6 +1002,46 @@ static struct board_info __initdata boar
- .has_ohci0 = 1,
- };
-
-+static struct board_info __initdata board_gw6200 = {
-+ .name = "GW6200",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+
-+ .has_enet0 = 1,
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+
-+ .has_enet1 = 1,
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+};
-+
-+static struct board_info __initdata board_gw6000 = {
-+ .name = "GW6000",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+
-+ .has_enet0 = 1,
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+
-+ .has_enet1 = 1,
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+};
-+
- static struct board_info __initdata board_FAST2404 = {
- .name = "F at ST2404",
- .expected_cpu_id = 0x6348,
-@@ -1287,6 +1327,8 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6348
- &board_96348r,
- &board_96348gw,
-+ &board_gw6000,
-+ &board_gw6200,
- &board_96348gw_10,
- &board_96348gw_11,
- &board_FAST2404,
-@@ -1353,6 +1395,8 @@ static struct of_device_id const bcm963x
- { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
- { .compatible = "sagem,fast-2404", .data = &board_FAST2404, },
- { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
-+ { .compatible = "tecom,gw6000", .data = &board_gw6000, },
-+ { .compatible = "tecom,gw6200", .data = &board_gw6200, },
- { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
- { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },
- #endif /* CONFIG_BCM63XX_CPU_6348 */
diff --git a/target/linux/bcm63xx/patches-5.4/564-board-bcm6348-telsey-magic.patch b/target/linux/bcm63xx/patches-5.4/564-board-bcm6348-telsey-magic.patch
deleted file mode 100644
index ba9ee0b4d4..0000000000
--- a/target/linux/bcm63xx/patches-5.4/564-board-bcm6348-telsey-magic.patch
+++ /dev/null
@@ -1,49 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1178,6 +1178,30 @@ static struct board_info __initdata boar
- .num_board_fixups = ARRAY_SIZE(spw500v_fixups),
- },
- };
-+
-+static struct board_info __initdata board_96348sv = {
-+ .name = "MAGIC",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_pccard = 1,
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+
-+ .has_enet0 = 1,
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+
-+ .has_enet1 = 1,
-+ .enet1 = {
-+ /* it has BP_ENET_EXTERNAL_PHY */
-+ .has_phy = 1,
-+ .phy_id = 0,
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6348 */
-
- /*
-@@ -1337,6 +1361,7 @@ static const struct board_info __initcon
- &board_rta1025w_16,
- &board_96348_D4PW,
- &board_spw500v,
-+ &board_96348sv,
- #endif /* CONFIG_BCM63XX_CPU_6348 */
- #ifdef CONFIG_BCM63XX_CPU_6358
- &board_96358vw,
-@@ -1397,6 +1422,7 @@ static struct of_device_id const bcm963x
- { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
- { .compatible = "tecom,gw6000", .data = &board_gw6000, },
- { .compatible = "tecom,gw6200", .data = &board_gw6200, },
-+ { .compatible = "telsey,magic", .data = &board_96348sv, },
- { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
- { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },
- #endif /* CONFIG_BCM63XX_CPU_6348 */
diff --git a/target/linux/bcm63xx/patches-5.4/566-board_bcm6348-bt-voyager-2110.patch b/target/linux/bcm63xx/patches-5.4/566-board_bcm6348-bt-voyager-2110.patch
deleted file mode 100644
index c51b28854b..0000000000
--- a/target/linux/bcm63xx/patches-5.4/566-board_bcm6348-bt-voyager-2110.patch
+++ /dev/null
@@ -1,41 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -979,6 +979,22 @@ static struct board_info __initdata boar
- .has_ehci0 = 1,
- };
-
-+/* BT Voyager 2110 */
-+static struct board_info __initdata board_V2110 = {
-+ .name = "V2110",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_pci = 1,
-+
-+ .has_enet1 = 1,
-+ .enet1 = {
-+ .has_phy = 1,
-+ .phy_id = 0,
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+};
-+
- static struct board_info __initdata board_96348gw = {
- .name = "96348GW",
- .expected_cpu_id = 0x6348,
-@@ -1384,6 +1400,7 @@ static const struct board_info __initcon
- &board_spw500v,
- &board_96348sv,
- &board_V2500V_BB,
-+ &board_V2110,
- #endif /* CONFIG_BCM63XX_CPU_6348 */
- #ifdef CONFIG_BCM63XX_CPU_6358
- &board_96358vw,
-@@ -1436,6 +1453,7 @@ static struct of_device_id const bcm963x
- { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
- { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
- { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
-+ { .compatible = "bt,voyager-2110", .data = &board_V2110, },
- { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, },
- { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
- { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
diff --git a/target/linux/bcm63xx/patches-5.4/568-board_bcm6348-comtrend-ct-536plus-ct-5621.patch b/target/linux/bcm63xx/patches-5.4/568-board_bcm6348-comtrend-ct-536plus-ct-5621.patch
deleted file mode 100644
index c815e66f1d..0000000000
--- a/target/linux/bcm63xx/patches-5.4/568-board_bcm6348-comtrend-ct-536plus-ct-5621.patch
+++ /dev/null
@@ -1,50 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -995,6 +995,30 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct board_info __initdata board_ct536_ct5621 = {
-+ .name = "CT536_CT5621",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_pccard = 1,
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+
-+ .has_enet1 = 1,
-+ .enet1 = {
-+ .has_phy = 1,
-+ .phy_id = 0,
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .use_fallback_sprom = 1,
-+ .fallback_sprom = {
-+ .type = SPROM_BCM4318,
-+ .pci_bus = 0,
-+ .pci_dev = 1,
-+ },
-+};
-+
- static struct board_info __initdata board_96348gw = {
- .name = "96348GW",
- .expected_cpu_id = 0x6348,
-@@ -1401,6 +1425,7 @@ static const struct board_info __initcon
- &board_96348sv,
- &board_V2500V_BB,
- &board_V2110,
-+ &board_ct536_ct5621,
- #endif /* CONFIG_BCM63XX_CPU_6348 */
- #ifdef CONFIG_BCM63XX_CPU_6358
- &board_96358vw,
-@@ -1455,6 +1480,8 @@ static struct of_device_id const bcm963x
- { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
- { .compatible = "bt,voyager-2110", .data = &board_V2110, },
- { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, },
-+ { .compatible = "comtrend,ct-536plus", .data = &board_ct536_ct5621, },
-+ { .compatible = "comtrend,ct-5621", .data = &board_ct536_ct5621, },
- { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
- { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
- { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
diff --git a/target/linux/bcm63xx/patches-5.4/569-board_bcm6348-comtrend-ct-5365.patch b/target/linux/bcm63xx/patches-5.4/569-board_bcm6348-comtrend-ct-5365.patch
deleted file mode 100644
index 7dbfb825fa..0000000000
--- a/target/linux/bcm63xx/patches-5.4/569-board_bcm6348-comtrend-ct-5365.patch
+++ /dev/null
@@ -1,48 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1019,6 +1019,29 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct board_info __initdata board_96348A_122 = {
-+ .name = "96348A-122",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+
-+ .has_enet1 = 1,
-+ .enet1 = {
-+ .has_phy = 1,
-+ .phy_id = 0,
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .use_fallback_sprom = 1,
-+ .fallback_sprom = {
-+ .type = SPROM_BCM4318,
-+ .pci_bus = 0,
-+ .pci_dev = 1,
-+ },
-+};
-+
- static struct board_info __initdata board_96348gw = {
- .name = "96348GW",
- .expected_cpu_id = 0x6348,
-@@ -1426,6 +1449,7 @@ static const struct board_info __initcon
- &board_V2500V_BB,
- &board_V2110,
- &board_ct536_ct5621,
-+ &board_96348A_122,
- #endif /* CONFIG_BCM63XX_CPU_6348 */
- #ifdef CONFIG_BCM63XX_CPU_6358
- &board_96358vw,
-@@ -1481,6 +1505,7 @@ static struct of_device_id const bcm963x
- { .compatible = "bt,voyager-2110", .data = &board_V2110, },
- { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, },
- { .compatible = "comtrend,ct-536plus", .data = &board_ct536_ct5621, },
-+ { .compatible = "comtrend,ct-5365", .data = &board_96348A_122, },
- { .compatible = "comtrend,ct-5621", .data = &board_ct536_ct5621, },
- { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
- { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
diff --git a/target/linux/bcm63xx/patches-5.4/570-board_bcm6348-telsey-cpva502plus.patch b/target/linux/bcm63xx/patches-5.4/570-board_bcm6348-telsey-cpva502plus.patch
deleted file mode 100644
index dc028609be..0000000000
--- a/target/linux/bcm63xx/patches-5.4/570-board_bcm6348-telsey-cpva502plus.patch
+++ /dev/null
@@ -1,53 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -995,6 +995,34 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct board_info __initdata board_CPVA502plus = {
-+ .name = "CPVA502+",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_pci = 1,
-+ .ephy_reset_gpio = 4,
-+ .ephy_reset_gpio_flags = GPIO_ACTIVE_LOW,
-+
-+ .has_enet0 = 1,
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+
-+ .has_enet1 = 1,
-+ .enet1 = {
-+ .has_phy = 1,
-+ .phy_id = 0,
-+ },
-+
-+ .use_fallback_sprom = 1,
-+ .fallback_sprom = {
-+ .type = SPROM_BCM4318,
-+ .pci_bus = 0,
-+ .pci_dev = 1,
-+ },
-+};
-+
- static struct board_info __initdata board_ct536_ct5621 = {
- .name = "CT536_CT5621",
- .expected_cpu_id = 0x6348,
-@@ -1450,6 +1478,7 @@ static const struct board_info __initcon
- &board_V2110,
- &board_ct536_ct5621,
- &board_96348A_122,
-+ &board_CPVA502plus,
- #endif /* CONFIG_BCM63XX_CPU_6348 */
- #ifdef CONFIG_BCM63XX_CPU_6358
- &board_96358vw,
-@@ -1515,6 +1544,7 @@ static struct of_device_id const bcm963x
- { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
- { .compatible = "tecom,gw6000", .data = &board_gw6000, },
- { .compatible = "tecom,gw6200", .data = &board_gw6200, },
-+ { .compatible = "telsey,cpva502plus", .data = &board_CPVA502plus, },
- { .compatible = "telsey,magic", .data = &board_96348sv, },
- { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
- { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },
diff --git a/target/linux/bcm63xx/patches-5.4/571-board_bcm6348-netgear-dg834g-v4.patch b/target/linux/bcm63xx/patches-5.4/571-board_bcm6348-netgear-dg834g-v4.patch
deleted file mode 100644
index d68f690578..0000000000
--- a/target/linux/bcm63xx/patches-5.4/571-board_bcm6348-netgear-dg834g-v4.patch
+++ /dev/null
@@ -1,42 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1225,6 +1225,23 @@ static struct board_info __initdata boar
- .has_ohci0 = 1,
- };
-
-+/* NetGear DG834G v4 */
-+static struct board_info __initdata board_96348W3 = {
-+ .name = "96348W3",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+
-+ .has_enet1 = 1,
-+ .enet1 = {
-+ .has_phy = 1,
-+ .phy_id = 0,
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+};
-+
- static struct board_info __initdata board_96348_D4PW = {
- .name = "D-4P-W",
- .expected_cpu_id = 0x6348,
-@@ -1479,6 +1496,7 @@ static const struct board_info __initcon
- &board_ct536_ct5621,
- &board_96348A_122,
- &board_CPVA502plus,
-+ &board_96348W3,
- #endif /* CONFIG_BCM63XX_CPU_6348 */
- #ifdef CONFIG_BCM63XX_CPU_6358
- &board_96358vw,
-@@ -1540,6 +1558,7 @@ static struct of_device_id const bcm963x
- { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
- { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
- { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
-+ { .compatible = "netgear,dg834g-v4", .data = &board_96348W3, },
- { .compatible = "sagem,fast-2404", .data = &board_FAST2404, },
- { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
- { .compatible = "tecom,gw6000", .data = &board_gw6000, },
diff --git a/target/linux/bcm63xx/patches-5.4/572-board_bcm6348-sagem-fast-2604.patch b/target/linux/bcm63xx/patches-5.4/572-board_bcm6348-sagem-fast-2604.patch
deleted file mode 100644
index 21b10da89f..0000000000
--- a/target/linux/bcm63xx/patches-5.4/572-board_bcm6348-sagem-fast-2604.patch
+++ /dev/null
@@ -1,41 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1159,6 +1159,22 @@ static struct board_info __initdata boar
- .has_ehci0 = 1,
- };
-
-+static struct board_info __initdata board_FAST2604 = {
-+ .name = "F at ST2604",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+
-+ .has_enet1 = 1,
-+ .enet1 = {
-+ .has_phy = 1,
-+ .phy_id = 0,
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+};
-+
- static struct board_info __initdata board_rta1025w_16 = {
- .name = "RTA1025W_16",
- .expected_cpu_id = 0x6348,
-@@ -1485,6 +1501,7 @@ static const struct board_info __initcon
- &board_96348gw_10,
- &board_96348gw_11,
- &board_FAST2404,
-+ &board_FAST2604,
- &board_DV201AMR,
- &board_96348gw_a,
- &board_rta1025w_16,
-@@ -1560,6 +1577,7 @@ static struct of_device_id const bcm963x
- { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
- { .compatible = "netgear,dg834g-v4", .data = &board_96348W3, },
- { .compatible = "sagem,fast-2404", .data = &board_FAST2404, },
-+ { .compatible = "sagem,fast-2604", .data = &board_FAST2604, },
- { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
- { .compatible = "tecom,gw6000", .data = &board_gw6000, },
- { .compatible = "tecom,gw6200", .data = &board_gw6200, },
diff --git a/target/linux/bcm63xx/patches-5.4/573-board_bcm6348-asmax-ar-1004g.patch b/target/linux/bcm63xx/patches-5.4/573-board_bcm6348-asmax-ar-1004g.patch
deleted file mode 100644
index a1eeee3b22..0000000000
--- a/target/linux/bcm63xx/patches-5.4/573-board_bcm6348-asmax-ar-1004g.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From: "mexit at o2.pl" <mexit at o2.pl>
-Date: Sun, 24 Nov 2013 21:33:38 +0000
-Subject: [PATCH 4/5] bcm63xx: add support for Asmax AR 1004g router
-
-Support for Asmax AR 1004g router
-
-Signed-off-by: Adrian Feliks <mexit at o2.pl>
----
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -979,6 +979,21 @@ static struct board_info __initdata boar
- .has_ehci0 = 1,
- };
-
-+static struct board_info __initdata board_96348gw_10_AR1004G = {
-+ .name = "AR1004G",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_pci = 1,
-+
-+ .has_enet1 = 1,
-+ .enet1 = {
-+ .has_phy = 1,
-+ .phy_id = 0,
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+};
-+
- /* BT Voyager 2110 */
- static struct board_info __initdata board_V2110 = {
- .name = "V2110",
-@@ -1514,6 +1529,7 @@ static const struct board_info __initcon
- &board_96348A_122,
- &board_CPVA502plus,
- &board_96348W3,
-+ &board_96348gw_10_AR1004G,
- #endif /* CONFIG_BCM63XX_CPU_6348 */
- #ifdef CONFIG_BCM63XX_CPU_6358
- &board_96358vw,
-@@ -1561,6 +1577,7 @@ static struct of_device_id const bcm963x
- { .compatible = "dynalink,rta770w", .data = &board_rta770w, },
- #endif /* CONFIG_BCM63XX_CPU_6345 */
- #ifdef CONFIG_BCM63XX_CPU_6348
-+ { .compatible = "asmax,ar-1004g", .data = &board_96348gw_10_AR1004G, },
- { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, },
- { .compatible = "brcm,bcm96348r", .data = &board_96348r, },
- { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
diff --git a/target/linux/bcm63xx/patches-5.4/602-board-bcm6358-sfr-neufbox-4.patch b/target/linux/bcm63xx/patches-5.4/602-board-bcm6358-sfr-neufbox-4.patch
deleted file mode 100644
index bb5ce6f840..0000000000
--- a/target/linux/bcm63xx/patches-5.4/602-board-bcm6358-sfr-neufbox-4.patch
+++ /dev/null
@@ -1,77 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1470,6 +1470,56 @@ static struct board_info __initdata boar
- .has_ohci0 = 1,
- .has_ehci0 = 1,
- };
-+
-+static struct board_info __initdata board_nb4_ser_r0 = {
-+ .name = "NB4-SER-r0",
-+ .expected_cpu_id = 0x6358,
-+
-+ .has_pccard = 1,
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 2,
-+
-+ .has_enet0 = 1,
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+
-+ .has_enet1 = 1,
-+ .enet1 = {
-+ .has_phy = 1,
-+ .phy_id = 0,
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+};
-+
-+static struct board_info __initdata board_nb4_fxc_r1 = {
-+ .name = "NB4-FXC-r1",
-+ .expected_cpu_id = 0x6358,
-+
-+ .has_pccard = 1,
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 2,
-+
-+ .has_enet0 = 1,
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+
-+ .has_enet1 = 1,
-+ .enet1 = {
-+ .has_phy = 1,
-+ .phy_id = 0,
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6358 */
-
- /*
-@@ -1537,6 +1587,8 @@ static const struct board_info __initcon
- &board_96358vw2,
- &board_AGPFS0,
- &board_DWVS0,
-+ &board_nb4_ser_r0,
-+ &board_nb4_fxc_r1,
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- };
-
-@@ -1613,6 +1665,8 @@ static struct of_device_id const bcm963x
- { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
- { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, },
- { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, },
-+ { .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, },
-+ { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, },
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- #ifdef CONFIG_BCM63XX_CPU_6362
- #endif /* CONFIG_BCM63XX_CPU_6362 */
diff --git a/target/linux/bcm63xx/patches-5.4/603-board-bcm6358-telsey-cpva642.patch b/target/linux/bcm63xx/patches-5.4/603-board-bcm6358-telsey-cpva642.patch
deleted file mode 100644
index be860fa722..0000000000
--- a/target/linux/bcm63xx/patches-5.4/603-board-bcm6358-telsey-cpva642.patch
+++ /dev/null
@@ -1,42 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1422,6 +1422,23 @@ static struct board_info __initdata boar
- .num_usbh_ports = 2,
- };
-
-+static struct board_info __initdata board_CPVA642 = {
-+ .name = "CPVA642",
-+ .expected_cpu_id = 0x6358,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+
-+ .has_enet1 = 1,
-+ .enet1 = {
-+ .has_phy = 1,
-+ .phy_id = 0,
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+};
-+
- static struct board_info __initdata board_AGPFS0 = {
- .name = "AGPF-S0",
- .expected_cpu_id = 0x6358,
-@@ -1586,6 +1603,7 @@ static const struct board_info __initcon
- &board_96358vw,
- &board_96358vw2,
- &board_AGPFS0,
-+ &board_CPVA642,
- &board_DWVS0,
- &board_nb4_ser_r0,
- &board_nb4_fxc_r1,
-@@ -1667,6 +1685,7 @@ static struct of_device_id const bcm963x
- { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, },
- { .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, },
- { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, },
-+ { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- #ifdef CONFIG_BCM63XX_CPU_6362
- #endif /* CONFIG_BCM63XX_CPU_6362 */
diff --git a/target/linux/bcm63xx/patches-5.4/604-board_bcm6358-d-link-dsl-274xb-c.patch b/target/linux/bcm63xx/patches-5.4/604-board_bcm6358-d-link-dsl-274xb-c.patch
deleted file mode 100644
index 3fb9940e78..0000000000
--- a/target/linux/bcm63xx/patches-5.4/604-board_bcm6358-d-link-dsl-274xb-c.patch
+++ /dev/null
@@ -1,41 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1488,6 +1488,22 @@ static struct board_info __initdata boar
- .has_ehci0 = 1,
- };
-
-+/* D-Link DSL-274xB revison C2/C3 */
-+static struct board_info __initdata board_dsl_274xb_rev_c = {
-+ .name = "AW4139",
-+ .expected_cpu_id = 0x6358,
-+
-+ .has_pci = 1,
-+
-+ .has_enet1 = 1,
-+ .enet1 = {
-+ .has_phy = 1,
-+ .phy_id = 0,
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+};
-+
- static struct board_info __initdata board_nb4_ser_r0 = {
- .name = "NB4-SER-r0",
- .expected_cpu_id = 0x6358,
-@@ -1605,6 +1621,7 @@ static const struct board_info __initcon
- &board_AGPFS0,
- &board_CPVA642,
- &board_DWVS0,
-+ &board_dsl_274xb_rev_c,
- &board_nb4_ser_r0,
- &board_nb4_fxc_r1,
- #endif /* CONFIG_BCM63XX_CPU_6358 */
-@@ -1678,6 +1695,7 @@ static struct of_device_id const bcm963x
- { .compatible = "alcatel,rg100a", .data = &board_96358vw2, },
- { .compatible = "brcm,bcm96358vw", .data = &board_96358vw, },
- { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
-+ { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
- { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
- { .compatible = "pirelli,a226g", .data = &board_DWVS0, },
- { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
diff --git a/target/linux/bcm63xx/patches-5.4/605-board_bcm6358-huawei-echolife-hg553.patch b/target/linux/bcm63xx/patches-5.4/605-board_bcm6358-huawei-echolife-hg553.patch
deleted file mode 100644
index e5eb2ff8e2..0000000000
--- a/target/linux/bcm63xx/patches-5.4/605-board_bcm6358-huawei-echolife-hg553.patch
+++ /dev/null
@@ -1,50 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1553,6 +1553,31 @@ static struct board_info __initdata boar
- .force_duplex_full = 1,
- },
- };
-+
-+static struct board_info __initdata board_HW553 = {
-+ .name = "HW553",
-+ .expected_cpu_id = 0x6358,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 2,
-+
-+ .has_enet1 = 1,
-+ .enet1 = {
-+ .has_phy = 1,
-+ .phy_id = 0,
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .use_fallback_sprom = 1,
-+ .fallback_sprom = {
-+ .type = SPROM_BCM4318,
-+ .pci_bus = 0,
-+ .pci_dev = 1,
-+ },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6358 */
-
- /*
-@@ -1624,6 +1649,7 @@ static const struct board_info __initcon
- &board_dsl_274xb_rev_c,
- &board_nb4_ser_r0,
- &board_nb4_fxc_r1,
-+ &board_HW553,
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- };
-
-@@ -1697,6 +1723,7 @@ static struct of_device_id const bcm963x
- { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
- { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
- { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
-+ { .compatible = "huawei,echolife-hg553", .data = &board_HW553, },
- { .compatible = "pirelli,a226g", .data = &board_DWVS0, },
- { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
- { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, },
diff --git a/target/linux/bcm63xx/patches-5.4/606-board_bcm6358-t-com-speedport-w-303v.patch b/target/linux/bcm63xx/patches-5.4/606-board_bcm6358-t-com-speedport-w-303v.patch
deleted file mode 100644
index 114e55a14d..0000000000
--- a/target/linux/bcm63xx/patches-5.4/606-board_bcm6358-t-com-speedport-w-303v.patch
+++ /dev/null
@@ -1,39 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1578,6 +1578,20 @@ static struct board_info __initdata boar
- .pci_dev = 1,
- },
- };
-+
-+ /* T-Home Speedport W 303V Typ B */
-+static struct board_info __initdata board_spw303v = {
-+ .name = "96358-502V",
-+ .expected_cpu_id = 0x6358,
-+
-+ .has_pci = 1,
-+
-+ .has_enet0 = 1,
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6358 */
-
- /*
-@@ -1650,6 +1664,7 @@ static const struct board_info __initcon
- &board_nb4_ser_r0,
- &board_nb4_fxc_r1,
- &board_HW553,
-+ &board_spw303v,
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- };
-
-@@ -1730,6 +1745,7 @@ static struct of_device_id const bcm963x
- { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, },
- { .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, },
- { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, },
-+ { .compatible = "t-com,speedport-w-303v", .data = &board_spw303v, },
- { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- #ifdef CONFIG_BCM63XX_CPU_6362
diff --git a/target/linux/bcm63xx/patches-5.4/607-board_bcm6358-comtrend-ct-6373.patch b/target/linux/bcm63xx/patches-5.4/607-board_bcm6358-comtrend-ct-6373.patch
deleted file mode 100644
index 4c0ff79067..0000000000
--- a/target/linux/bcm63xx/patches-5.4/607-board_bcm6358-comtrend-ct-6373.patch
+++ /dev/null
@@ -1,49 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1554,6 +1554,30 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct board_info __initdata board_ct6373_1 = {
-+ .name = "CT6373-1",
-+ .expected_cpu_id = 0x6358,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+
-+ .has_enet1 = 1,
-+ .enet1 = {
-+ .has_phy = 1,
-+ .phy_id = 0,
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .use_fallback_sprom = 1,
-+ .fallback_sprom = {
-+ .type = SPROM_BCM4318,
-+ .pci_bus = 0,
-+ .pci_dev = 1,
-+ },
-+};
-+
- static struct board_info __initdata board_HW553 = {
- .name = "HW553",
- .expected_cpu_id = 0x6358,
-@@ -1663,6 +1687,7 @@ static const struct board_info __initcon
- &board_dsl_274xb_rev_c,
- &board_nb4_ser_r0,
- &board_nb4_fxc_r1,
-+ &board_ct6373_1,
- &board_HW553,
- &board_spw303v,
- #endif /* CONFIG_BCM63XX_CPU_6358 */
-@@ -1736,6 +1761,7 @@ static struct of_device_id const bcm963x
- { .compatible = "alcatel,rg100a", .data = &board_96358vw2, },
- { .compatible = "brcm,bcm96358vw", .data = &board_96358vw, },
- { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
-+ { .compatible = "comtrend,ct-6373", .data = &board_ct6373_1, },
- { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
- { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
- { .compatible = "huawei,echolife-hg553", .data = &board_HW553, },
diff --git a/target/linux/bcm63xx/patches-5.4/608-board_bcm6358-d-link-dva-g3810bn-tl.patch b/target/linux/bcm63xx/patches-5.4/608-board_bcm6358-d-link-dva-g3810bn-tl.patch
deleted file mode 100644
index a106ab8447..0000000000
--- a/target/linux/bcm63xx/patches-5.4/608-board_bcm6358-d-link-dva-g3810bn-tl.patch
+++ /dev/null
@@ -1,50 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1616,6 +1616,31 @@ static struct board_info __initdata boar
- .use_internal_phy = 1,
- },
- };
-+
-+/* D-Link DVA-G3810BN/TL */
-+static struct board_info __initdata board_DVAG3810BN = {
-+ .name = "DVAG3810BN",
-+ .expected_cpu_id = 0x6358,
-+
-+ .has_pccard = 1,
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+
-+ .has_enet0 = 1,
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+
-+ .has_enet1 = 1,
-+ .enet1 = {
-+ .has_phy = 1,
-+ .phy_id = 0,
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6358 */
-
- /*
-@@ -1690,6 +1715,7 @@ static const struct board_info __initcon
- &board_ct6373_1,
- &board_HW553,
- &board_spw303v,
-+ &board_DVAG3810BN,
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- };
-
-@@ -1764,6 +1790,7 @@ static struct of_device_id const bcm963x
- { .compatible = "comtrend,ct-6373", .data = &board_ct6373_1, },
- { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
- { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
-+ { .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, },
- { .compatible = "huawei,echolife-hg553", .data = &board_HW553, },
- { .compatible = "pirelli,a226g", .data = &board_DWVS0, },
- { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
diff --git a/target/linux/bcm63xx/patches-5.4/609-board_bcm6358-huawei-echolife-hg556.patch b/target/linux/bcm63xx/patches-5.4/609-board_bcm6358-huawei-echolife-hg556.patch
deleted file mode 100644
index d05e6ca985..0000000000
--- a/target/linux/bcm63xx/patches-5.4/609-board_bcm6358-huawei-echolife-hg556.patch
+++ /dev/null
@@ -1,125 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -12,6 +12,7 @@
- #include <linux/init.h>
- #include <linux/kernel.h>
- #include <linux/string.h>
-+#include <linux/pci_ids.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -1603,6 +1604,94 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct board_info __initdata board_HW556_A = {
-+ .name = "HW556_A",
-+ .expected_cpu_id = 0x6358,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 2,
-+
-+ .has_caldata = 1,
-+ .caldata = {
-+ {
-+ .vendor = PCI_VENDOR_ID_ATHEROS,
-+ .caldata_offset = 0xf7e000,
-+ .slot = 1,
-+ .endian_check = 1,
-+ .led_pin = 2,
-+ .led_active_high = 1,
-+ },
-+ },
-+
-+ .has_enet1 = 1,
-+ .enet1 = {
-+ .has_phy = 1,
-+ .phy_id = 0,
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+};
-+
-+static struct board_info __initdata board_HW556_B = {
-+ .name = "HW556_B",
-+ .expected_cpu_id = 0x6358,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 2,
-+
-+ .has_caldata = 1,
-+ .caldata = {
-+ {
-+ .vendor = PCI_VENDOR_ID_ATHEROS,
-+ .caldata_offset = 0xefe000,
-+ .slot = 1,
-+ .endian_check = 1,
-+ .led_pin = 2,
-+ .led_active_high = 1,
-+ },
-+ },
-+
-+ .has_enet1 = 1,
-+ .enet1 = {
-+ .has_phy = 1,
-+ .phy_id = 0,
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+};
-+
-+static struct board_info __initdata board_HW556_C = {
-+ .name = "HW556_C",
-+ .expected_cpu_id = 0x6358,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 2,
-+
-+ .has_caldata = 1,
-+ .caldata = {
-+ {
-+ .vendor = PCI_VENDOR_ID_RALINK,
-+ .caldata_offset = 0xeffe00,
-+ .slot = 1,
-+ .eeprom = "rt2x00.eeprom",
-+ },
-+ },
-+
-+ .has_enet1 = 1,
-+ .enet1 = {
-+ .has_phy = 1,
-+ .phy_id = 0,
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+};
-+
- /* T-Home Speedport W 303V Typ B */
- static struct board_info __initdata board_spw303v = {
- .name = "96358-502V",
-@@ -1714,6 +1803,9 @@ static const struct board_info __initcon
- &board_nb4_fxc_r1,
- &board_ct6373_1,
- &board_HW553,
-+ &board_HW556_A,
-+ &board_HW556_B,
-+ &board_HW556_C,
- &board_spw303v,
- &board_DVAG3810BN,
- #endif /* CONFIG_BCM63XX_CPU_6358 */
-@@ -1792,6 +1884,9 @@ static struct of_device_id const bcm963x
- { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
- { .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, },
- { .compatible = "huawei,echolife-hg553", .data = &board_HW553, },
-+ { .compatible = "huawei,echolife-hg556a-a", .data = &board_HW556_A, },
-+ { .compatible = "huawei,echolife-hg556a-b", .data = &board_HW556_B, },
-+ { .compatible = "huawei,echolife-hg556a-c", .data = &board_HW556_C, },
- { .compatible = "pirelli,a226g", .data = &board_DWVS0, },
- { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
- { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, },
diff --git a/target/linux/bcm63xx/patches-5.4/610-board_bcm6359-huawei-echolife-hg520v.patch b/target/linux/bcm63xx/patches-5.4/610-board_bcm6359-huawei-echolife-hg520v.patch
deleted file mode 100644
index ff31e2973a..0000000000
--- a/target/linux/bcm63xx/patches-5.4/610-board_bcm6359-huawei-echolife-hg520v.patch
+++ /dev/null
@@ -1,55 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1579,6 +1579,36 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct board_info __initdata board_HW520 = {
-+ .name = "HW6358GW_B",
-+ .expected_cpu_id = 0x6358,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+
-+ .has_enet0 = 1,
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+
-+ .has_enet1 = 1,
-+ .enet1 = {
-+ .has_phy = 1,
-+ .phy_id = 0,
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .use_fallback_sprom = 1,
-+ .fallback_sprom = {
-+ .type = SPROM_BCM4318,
-+ .pci_bus = 0,
-+ .pci_dev = 1,
-+ },
-+};
-+
- static struct board_info __initdata board_HW553 = {
- .name = "HW553",
- .expected_cpu_id = 0x6358,
-@@ -1802,6 +1832,7 @@ static const struct board_info __initcon
- &board_nb4_ser_r0,
- &board_nb4_fxc_r1,
- &board_ct6373_1,
-+ &board_HW520,
- &board_HW553,
- &board_HW556_A,
- &board_HW556_B,
-@@ -1883,6 +1914,7 @@ static struct of_device_id const bcm963x
- { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
- { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
- { .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, },
-+ { .compatible = "huawei,echolife-hg520v", .data = &board_HW520, },
- { .compatible = "huawei,echolife-hg553", .data = &board_HW553, },
- { .compatible = "huawei,echolife-hg556a-a", .data = &board_HW556_A, },
- { .compatible = "huawei,echolife-hg556a-b", .data = &board_HW556_B, },
diff --git a/target/linux/bcm63xx/patches-5.4/611-board_bcm6358-bt-home-hub-2-a.patch b/target/linux/bcm63xx/patches-5.4/611-board_bcm6358-bt-home-hub-2-a.patch
deleted file mode 100644
index b7caeb417b..0000000000
--- a/target/linux/bcm63xx/patches-5.4/611-board_bcm6358-bt-home-hub-2-a.patch
+++ /dev/null
@@ -1,50 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1579,6 +1579,31 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct board_info __initdata board_homehub2a = {
-+ .name = "HOMEHUB2A",
-+ .expected_cpu_id = 0x6358,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 2,
-+
-+ .has_enet1 = 1,
-+ .enet1 = {
-+ .has_phy = 1,
-+ .phy_id = 0,
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .use_fallback_sprom = 1,
-+ .fallback_sprom = {
-+ .type = SPROM_BCM4322,
-+ .pci_bus = 0,
-+ .pci_dev = 1,
-+ },
-+};
-+
- static struct board_info __initdata board_HW520 = {
- .name = "HW6358GW_B",
- .expected_cpu_id = 0x6358,
-@@ -1832,6 +1857,7 @@ static const struct board_info __initcon
- &board_nb4_ser_r0,
- &board_nb4_fxc_r1,
- &board_ct6373_1,
-+ &board_homehub2a,
- &board_HW520,
- &board_HW553,
- &board_HW556_A,
-@@ -1927,6 +1953,7 @@ static struct of_device_id const bcm963x
- { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, },
- { .compatible = "t-com,speedport-w-303v", .data = &board_spw303v, },
- { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
-+ { .compatible = "bt,home-hub-2-a", .data = &board_homehub2a, },
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- #ifdef CONFIG_BCM63XX_CPU_6362
- #endif /* CONFIG_BCM63XX_CPU_6362 */
diff --git a/target/linux/bcm63xx/patches-5.4/631-board_bcm6361-sfr-neufbox-6.patch b/target/linux/bcm63xx/patches-5.4/631-board_bcm6361-sfr-neufbox-6.patch
deleted file mode 100644
index 79e9efb2b4..0000000000
--- a/target/linux/bcm63xx/patches-5.4/631-board_bcm6361-sfr-neufbox-6.patch
+++ /dev/null
@@ -1,52 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1787,6 +1787,31 @@ static struct board_info __initdata boar
- };
- #endif /* CONFIG_BCM63XX_CPU_6358 */
-
-+#ifdef CONFIG_BCM63XX_CPU_6362
-+static struct board_info __initdata board_nb6 = {
-+ .name = "NB6",
-+ .expected_cpu_id = 0x6362,
-+
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 2,
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [4] = {
-+ .used = 1,
-+ .phy_id = 0xff,
-+ .bypass_link = 1,
-+ .force_speed = 1000,
-+ .force_duplex_full = 1,
-+ .name = "RGMII",
-+ },
-+ },
-+ },
-+};
-+#endif /* CONFIG_BCM63XX_CPU_6362 */
-+
- /*
- * all boards
- */
-@@ -1866,6 +1891,9 @@ static const struct board_info __initcon
- &board_spw303v,
- &board_DVAG3810BN,
- #endif /* CONFIG_BCM63XX_CPU_6358 */
-+#ifdef CONFIG_BCM63XX_CPU_6362
-+ &board_nb6,
-+#endif /* CONFIG_BCM63XX_CPU_6362 */
- };
-
- static struct of_device_id const bcm963xx_boards_dt[] = {
-@@ -1956,6 +1984,7 @@ static struct of_device_id const bcm963x
- { .compatible = "bt,home-hub-2-a", .data = &board_homehub2a, },
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- #ifdef CONFIG_BCM63XX_CPU_6362
-+ { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, },
- #endif /* CONFIG_BCM63XX_CPU_6362 */
- #ifdef CONFIG_BCM63XX_CPU_6368
- #endif /* CONFIG_BCM63XX_CPU_6368 */
diff --git a/target/linux/bcm63xx/patches-5.4/632-board_bcm6362-sagem-fast-2504n.patch b/target/linux/bcm63xx/patches-5.4/632-board_bcm6362-sagem-fast-2504n.patch
deleted file mode 100644
index 3bb3ad4238..0000000000
--- a/target/linux/bcm63xx/patches-5.4/632-board_bcm6362-sagem-fast-2504n.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From: Max Staudt <openwrt.max at enpas.org>
-Date: Wed, 15 Jan 2014 18:51:13 +0000
-Subject: [PATCH] bcm63xx: F at ST2504n board support (Linux-3.10.26)
-
-Signed-off-by: Max Staudt <openwrt.max at enpas.org>
----
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1810,6 +1810,37 @@ static struct board_info __initdata boar
- },
- },
- };
-+
-+static struct board_info __initdata board_fast2504n = {
-+ .name = "F at ST2504n",
-+ .expected_cpu_id = 0x6362,
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "Port 1",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "Port 2",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "Port 3",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "Port 4",
-+ },
-+ },
-+ },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6362 */
-
- /*
-@@ -1893,6 +1924,7 @@ static const struct board_info __initcon
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- #ifdef CONFIG_BCM63XX_CPU_6362
- &board_nb6,
-+ &board_fast2504n,
- #endif /* CONFIG_BCM63XX_CPU_6362 */
- };
-
-@@ -1984,6 +2016,7 @@ static struct of_device_id const bcm963x
- { .compatible = "bt,home-hub-2-a", .data = &board_homehub2a, },
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- #ifdef CONFIG_BCM63XX_CPU_6362
-+ { .compatible = "sagem,fast-2504n", .data = &board_fast2504n, },
- { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, },
- #endif /* CONFIG_BCM63XX_CPU_6362 */
- #ifdef CONFIG_BCM63XX_CPU_6368
diff --git a/target/linux/bcm63xx/patches-5.4/633-board-bcm6362-netgear-dgnd3700-v2.patch b/target/linux/bcm63xx/patches-5.4/633-board-bcm6362-netgear-dgnd3700-v2.patch
deleted file mode 100644
index 17beb14154..0000000000
--- a/target/linux/bcm63xx/patches-5.4/633-board-bcm6362-netgear-dgnd3700-v2.patch
+++ /dev/null
@@ -1,49 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1811,6 +1811,30 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct board_info __initdata board_dgnd3700v2 = {
-+ .name = "96362ADVN2xh",
-+ .expected_cpu_id = 0x6362,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 2,
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [4] = {
-+ .used = 1,
-+ .phy_id = 0xff,
-+ .bypass_link = 1,
-+ .force_speed = 1000,
-+ .force_duplex_full = 1,
-+ .name = "RGMII",
-+ },
-+ },
-+ },
-+};
-+
- static struct board_info __initdata board_fast2504n = {
- .name = "F at ST2504n",
- .expected_cpu_id = 0x6362,
-@@ -1924,6 +1948,7 @@ static const struct board_info __initcon
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- #ifdef CONFIG_BCM63XX_CPU_6362
- &board_nb6,
-+ &board_dgnd3700v2,
- &board_fast2504n,
- #endif /* CONFIG_BCM63XX_CPU_6362 */
- };
-@@ -2016,6 +2041,7 @@ static struct of_device_id const bcm963x
- { .compatible = "bt,home-hub-2-a", .data = &board_homehub2a, },
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- #ifdef CONFIG_BCM63XX_CPU_6362
-+ { .compatible = "netgear,dgnd3700-v2", .data = &board_dgnd3700v2, },
- { .compatible = "sagem,fast-2504n", .data = &board_fast2504n, },
- { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, },
- #endif /* CONFIG_BCM63XX_CPU_6362 */
diff --git a/target/linux/bcm63xx/patches-5.4/634-board-bcm6362-huawei-hg253s-v2.patch b/target/linux/bcm63xx/patches-5.4/634-board-bcm6362-huawei-hg253s-v2.patch
deleted file mode 100644
index db36cf2ff4..0000000000
--- a/target/linux/bcm63xx/patches-5.4/634-board-bcm6362-huawei-hg253s-v2.patch
+++ /dev/null
@@ -1,56 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1865,6 +1865,37 @@ static struct board_info __initdata boar
- },
- },
- };
-+
-+static struct board_info __initdata board_hg253s_v2 = {
-+ .name = "hg253s",
-+ .expected_cpu_id = 0x6362,
-+
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 1,
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [4] = {
-+ .used = 1,
-+ .phy_id = 0xff,
-+ .bypass_link = 1,
-+ .force_speed = 1000,
-+ .force_duplex_full = 1,
-+ .timing_sel = 1,
-+ .name = "RGMII",
-+ },
-+
-+ [5] = {
-+ .used = 1,
-+ .phy_id = 24,
-+ .timing_sel = 1,
-+ .name = "WAN",
-+ },
-+ },
-+ },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6362 */
-
- /*
-@@ -1950,6 +1981,7 @@ static const struct board_info __initcon
- &board_nb6,
- &board_dgnd3700v2,
- &board_fast2504n,
-+ &board_hg253s_v2,
- #endif /* CONFIG_BCM63XX_CPU_6362 */
- };
-
-@@ -2041,6 +2073,7 @@ static struct of_device_id const bcm963x
- { .compatible = "bt,home-hub-2-a", .data = &board_homehub2a, },
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- #ifdef CONFIG_BCM63XX_CPU_6362
-+ { .compatible = "huawei,hg253s-v2", .data = &board_hg253s_v2, },
- { .compatible = "netgear,dgnd3700-v2", .data = &board_dgnd3700v2, },
- { .compatible = "sagem,fast-2504n", .data = &board_fast2504n, },
- { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, },
diff --git a/target/linux/bcm63xx/patches-5.4/651-bcm63xx-add-support-for-96368MVWG-board.patch b/target/linux/bcm63xx/patches-5.4/651-bcm63xx-add-support-for-96368MVWG-board.patch
deleted file mode 100644
index 948d473f53..0000000000
--- a/target/linux/bcm63xx/patches-5.4/651-bcm63xx-add-support-for-96368MVWG-board.patch
+++ /dev/null
@@ -1,111 +0,0 @@
-From eeacc2529942051504bc957726aa178671344421 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <mbizon at freebox.fr>
-Date: Wed, 20 Jan 2010 16:21:30 +0100
-Subject: [PATCH 32/63] bcm63xx: add support for 96368MVWG board.
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 95 ++++++++++++++++++++
- .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h | 2 +
- 2 files changed, 97 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1899,6 +1899,52 @@ static struct board_info __initdata boar
- #endif /* CONFIG_BCM63XX_CPU_6362 */
-
- /*
-+ * known 6368 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_6368
-+static struct board_info __initdata board_96368mvwg = {
-+ .name = "96368MVWG",
-+ .expected_cpu_id = 0x6368,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+
-+ .has_usbd = 1,
-+ .usbd = {
-+ .use_fullspeed = 0,
-+ .port_no = 0,
-+ },
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "port1",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "port2",
-+ },
-+ [4] = {
-+ .used = 1,
-+ .phy_id = 0x12,
-+ .name = "port0",
-+ },
-+ [5] = {
-+ .used = 1,
-+ .phy_id = 0x11,
-+ .name = "port3",
-+ },
-+ },
-+ },
-+};
-+#endif /* CONFIG_BCM63XX_CPU_6368 */
-+
-+/*
- * all boards
- */
- static const struct board_info __initconst *bcm963xx_boards[] = {
-@@ -1983,6 +2029,9 @@ static const struct board_info __initcon
- &board_fast2504n,
- &board_hg253s_v2,
- #endif /* CONFIG_BCM63XX_CPU_6362 */
-+#ifdef CONFIG_BCM63XX_CPU_6368
-+ &board_96368mvwg,
-+#endif /* CONFIG_BCM63XX_CPU_6368 */
- };
-
- static struct of_device_id const bcm963xx_boards_dt[] = {
-@@ -2079,6 +2128,7 @@ static struct of_device_id const bcm963x
- { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, },
- #endif /* CONFIG_BCM63XX_CPU_6362 */
- #ifdef CONFIG_BCM63XX_CPU_6368
-+ { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- #ifdef CONFIG_BCM63XX_CPU_63268
- #endif /* CONFIG_BCM63XX_CPU_63268 */
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -81,12 +81,25 @@ void __init board_early_setup(const stru
- bcm63xx_pci_enabled = 1;
- if (BCMCPU_IS_6348())
- val |= GPIO_MODE_6348_G2_PCI;
-+
-+ if (BCMCPU_IS_6368())
-+ val |= GPIO_MODE_6368_PCI_REQ1 |
-+ GPIO_MODE_6368_PCI_GNT1 |
-+ GPIO_MODE_6368_PCI_INTB |
-+ GPIO_MODE_6368_PCI_REQ0 |
-+ GPIO_MODE_6368_PCI_GNT0;
- }
- #endif
-
- if (board.has_pccard) {
- if (BCMCPU_IS_6348())
- val |= GPIO_MODE_6348_G1_MII_PCCARD;
-+
-+ if (BCMCPU_IS_6368())
-+ val |= GPIO_MODE_6368_PCMCIA_CD1 |
-+ GPIO_MODE_6368_PCMCIA_CD2 |
-+ GPIO_MODE_6368_PCMCIA_VS1 |
-+ GPIO_MODE_6368_PCMCIA_VS2;
- }
-
- if (board.has_enet0 && !board.enet0.use_internal_phy) {
diff --git a/target/linux/bcm63xx/patches-5.4/652-bcm63xx-add-support-for-96368MVNgr-board.patch b/target/linux/bcm63xx/patches-5.4/652-bcm63xx-add-support-for-96368MVNgr-board.patch
deleted file mode 100644
index 663304d08f..0000000000
--- a/target/linux/bcm63xx/patches-5.4/652-bcm63xx-add-support-for-96368MVNgr-board.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From f457fc2eb9bb915b5a4d251c7c68d4694cf07b01 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <mbizon at freebox.fr>
-Date: Fri, 4 Nov 2011 12:33:48 +0100
-Subject: [PATCH 33/63] bcm63xx: add support for 96368MVNgr board.
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 67 +++++++++++++++++++++++++++++
- 1 files changed, 67 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1942,6 +1942,41 @@ static struct board_info __initdata boar
- },
- },
- };
-+
-+static struct board_info __initdata board_96368mvngr = {
-+ .name = "96368MVNgr",
-+ .expected_cpu_id = 0x6368,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "port1",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "port2",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "port3",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "port4",
-+ },
-+ },
-+ },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6368 */
-
- /*
-@@ -2031,6 +2066,7 @@ static const struct board_info __initcon
- #endif /* CONFIG_BCM63XX_CPU_6362 */
- #ifdef CONFIG_BCM63XX_CPU_6368
- &board_96368mvwg,
-+ &board_96368mvngr,
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- };
-
-@@ -2128,6 +2164,7 @@ static struct of_device_id const bcm963x
- { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, },
- #endif /* CONFIG_BCM63XX_CPU_6362 */
- #ifdef CONFIG_BCM63XX_CPU_6368
-+ { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
- { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/bcm63xx/patches-5.4/653-board_bcm6369-comtrend-wap-5813n.patch b/target/linux/bcm63xx/patches-5.4/653-board_bcm6369-comtrend-wap-5813n.patch
deleted file mode 100644
index 0386dc8308..0000000000
--- a/target/linux/bcm63xx/patches-5.4/653-board_bcm6369-comtrend-wap-5813n.patch
+++ /dev/null
@@ -1,75 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -13,6 +13,8 @@
- #include <linux/kernel.h>
- #include <linux/string.h>
- #include <linux/pci_ids.h>
-+#include <linux/platform_data/b53.h>
-+#include <linux/spi/spi.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -1977,6 +1979,47 @@ static struct board_info __initdata boar
- },
- },
- };
-+
-+static struct sprom_fixup __initdata wap5813n_fixups[] = {
-+ { .offset = 97, .value = 0xfeed },
-+ { .offset = 98, .value = 0x15d1 },
-+ { .offset = 99, .value = 0xfb0d },
-+ { .offset = 113, .value = 0xfef7 },
-+ { .offset = 114, .value = 0x15f7 },
-+ { .offset = 115, .value = 0xfb1a },
-+};
-+
-+static struct board_info __initdata board_WAP5813n = {
-+ .name = "96369R-1231N",
-+ .expected_cpu_id = 0x6368,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [4] = {
-+ .used = 1,
-+ .phy_id = 0xff,
-+ .bypass_link = 1,
-+ .force_speed = 1000,
-+ .force_duplex_full = 1,
-+ .name = "RGMII",
-+ },
-+ },
-+ },
-+
-+ .use_fallback_sprom = 1,
-+ .fallback_sprom = {
-+ .type = SPROM_BCM43222,
-+ .pci_bus = 0,
-+ .pci_dev = 1,
-+ .board_fixups = wap5813n_fixups,
-+ .num_board_fixups = ARRAY_SIZE(wap5813n_fixups),
-+ },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6368 */
-
- /*
-@@ -2067,6 +2110,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6368
- &board_96368mvwg,
- &board_96368mvngr,
-+ &board_WAP5813n,
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- };
-
-@@ -2166,6 +2210,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6368
- { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
- { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
-+ { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- #ifdef CONFIG_BCM63XX_CPU_63268
- #endif /* CONFIG_BCM63XX_CPU_63268 */
diff --git a/target/linux/bcm63xx/patches-5.4/654-board_bcm6368-comtrend-vr-3025u.patch b/target/linux/bcm63xx/patches-5.4/654-board_bcm6368-comtrend-vr-3025u.patch
deleted file mode 100644
index 7772594394..0000000000
--- a/target/linux/bcm63xx/patches-5.4/654-board_bcm6368-comtrend-vr-3025u.patch
+++ /dev/null
@@ -1,78 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1980,6 +1980,59 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct sprom_fixup __initdata vr3025u_fixups[] = {
-+ { .offset = 97, .value = 0xfeb3 },
-+ { .offset = 98, .value = 0x1618 },
-+ { .offset = 99, .value = 0xfab0 },
-+ { .offset = 113, .value = 0xfed1 },
-+ { .offset = 114, .value = 0x1609 },
-+ { .offset = 115, .value = 0xfad9 },
-+};
-+
-+static struct board_info __initdata board_VR3025u = {
-+ .name = "96368M-1541N",
-+ .expected_cpu_id = 0x6368,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "port1",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "port2",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "port3",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "port4",
-+ },
-+ },
-+ },
-+
-+ .use_fallback_sprom = 1,
-+ .fallback_sprom = {
-+ .type = SPROM_BCM43222,
-+ .pci_bus = 0,
-+ .pci_dev = 1,
-+ .board_fixups = vr3025u_fixups,
-+ .num_board_fixups = ARRAY_SIZE(vr3025u_fixups),
-+ },
-+};
-+
- static struct sprom_fixup __initdata wap5813n_fixups[] = {
- { .offset = 97, .value = 0xfeed },
- { .offset = 98, .value = 0x15d1 },
-@@ -2110,6 +2163,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6368
- &board_96368mvwg,
- &board_96368mvngr,
-+ &board_VR3025u,
- &board_WAP5813n,
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- };
-@@ -2210,6 +2264,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6368
- { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
- { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
-+ { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
- { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/bcm63xx/patches-5.4/655-board_bcm6368-comtrend-vr-3025un.patch b/target/linux/bcm63xx/patches-5.4/655-board_bcm6368-comtrend-vr-3025un.patch
deleted file mode 100644
index 82c0887840..0000000000
--- a/target/linux/bcm63xx/patches-5.4/655-board_bcm6368-comtrend-vr-3025un.patch
+++ /dev/null
@@ -1,78 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2033,6 +2033,59 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct sprom_fixup __initdata vr3025un_fixups[] = {
-+ { .offset = 97, .value = 0xfeb3 },
-+ { .offset = 98, .value = 0x1618 },
-+ { .offset = 99, .value = 0xfab0 },
-+ { .offset = 113, .value = 0xfed1 },
-+ { .offset = 114, .value = 0x1609 },
-+ { .offset = 115, .value = 0xfad9 },
-+};
-+
-+static struct board_info __initdata board_VR3025un = {
-+ .name = "96368M-1341N",
-+ .expected_cpu_id = 0x6368,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "port1",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "port2",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "port3",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "port4",
-+ },
-+ },
-+ },
-+
-+ .use_fallback_sprom = 1,
-+ .fallback_sprom = {
-+ .type = SPROM_BCM43222,
-+ .pci_bus = 0,
-+ .pci_dev = 1,
-+ .board_fixups = vr3025un_fixups,
-+ .num_board_fixups = ARRAY_SIZE(vr3025un_fixups),
-+ },
-+};
-+
- static struct sprom_fixup __initdata wap5813n_fixups[] = {
- { .offset = 97, .value = 0xfeed },
- { .offset = 98, .value = 0x15d1 },
-@@ -2164,6 +2217,7 @@ static const struct board_info __initcon
- &board_96368mvwg,
- &board_96368mvngr,
- &board_VR3025u,
-+ &board_VR3025un,
- &board_WAP5813n,
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- };
-@@ -2265,6 +2319,7 @@ static struct of_device_id const bcm963x
- { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
- { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
- { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
-+ { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
- { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/bcm63xx/patches-5.4/656-board_bcm6368-zyxel-p870hw-51a-v2.patch b/target/linux/bcm63xx/patches-5.4/656-board_bcm6368-zyxel-p870hw-51a-v2.patch
deleted file mode 100644
index 0c2c2b9c8d..0000000000
--- a/target/linux/bcm63xx/patches-5.4/656-board_bcm6368-zyxel-p870hw-51a-v2.patch
+++ /dev/null
@@ -1,67 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1989,6 +1989,48 @@ static struct sprom_fixup __initdata vr3
- { .offset = 115, .value = 0xfad9 },
- };
-
-+static struct board_info __initdata board_P870HW51A_V2 = {
-+ .name = "P870HW-51a_v2",
-+ .expected_cpu_id = 0x6368,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "port1",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "port2",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "port3",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "port4",
-+ },
-+ },
-+ },
-+
-+ .use_fallback_sprom = 1,
-+ .fallback_sprom = {
-+ .type = SPROM_BCM4318,
-+ .pci_bus = 0,
-+ .pci_dev = 1,
-+ },
-+};
-+
- static struct board_info __initdata board_VR3025u = {
- .name = "96368M-1541N",
- .expected_cpu_id = 0x6368,
-@@ -2216,6 +2258,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6368
- &board_96368mvwg,
- &board_96368mvngr,
-+ &board_P870HW51A_V2,
- &board_VR3025u,
- &board_VR3025un,
- &board_WAP5813n,
-@@ -2321,6 +2364,7 @@ static struct of_device_id const bcm963x
- { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
- { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
- { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
-+ { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- #ifdef CONFIG_BCM63XX_CPU_63268
- #endif /* CONFIG_BCM63XX_CPU_63268 */
diff --git a/target/linux/bcm63xx/patches-5.4/657-board_bcm6368-netgear-dgnd3700-v1.patch b/target/linux/bcm63xx/patches-5.4/657-board_bcm6368-netgear-dgnd3700-v1.patch
deleted file mode 100644
index 47a19afbfa..0000000000
--- a/target/linux/bcm63xx/patches-5.4/657-board_bcm6368-netgear-dgnd3700-v1.patch
+++ /dev/null
@@ -1,49 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1980,6 +1980,30 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct board_info __initdata board_DGND3700v1_3800B = {
-+ .name = "DGND3700v1_3800B",
-+ .expected_cpu_id = 0x6368,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 2,
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [5] = {
-+ .used = 1,
-+ .phy_id = 0xff,
-+ .bypass_link = 1,
-+ .force_speed = 1000,
-+ .force_duplex_full = 1,
-+ .name = "RGMII",
-+ },
-+ },
-+ },
-+};
-+
- static struct sprom_fixup __initdata vr3025u_fixups[] = {
- { .offset = 97, .value = 0xfeb3 },
- { .offset = 98, .value = 0x1618 },
-@@ -2258,6 +2282,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6368
- &board_96368mvwg,
- &board_96368mvngr,
-+ &board_DGND3700v1_3800B,
- &board_P870HW51A_V2,
- &board_VR3025u,
- &board_VR3025un,
-@@ -2364,6 +2389,7 @@ static struct of_device_id const bcm963x
- { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
- { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
- { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
-+ { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
- { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/bcm63xx/patches-5.4/658-board_bcm6368-huawei-echolife-hg655b.patch b/target/linux/bcm63xx/patches-5.4/658-board_bcm6368-huawei-echolife-hg655b.patch
deleted file mode 100644
index c1ad040cba..0000000000
--- a/target/linux/bcm63xx/patches-5.4/658-board_bcm6368-huawei-echolife-hg655b.patch
+++ /dev/null
@@ -1,71 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2004,6 +2004,52 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct board_info __initdata board_HG655b = {
-+ .name = "HW65x",
-+ .expected_cpu_id = 0x6368,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 2,
-+
-+ .has_caldata = 1,
-+ .caldata = {
-+ {
-+ .vendor = PCI_VENDOR_ID_RALINK,
-+ .caldata_offset = 0x7c0000,
-+ .slot = 1,
-+ .eeprom = "rt2x00.eeprom",
-+ },
-+ },
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "port1",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "port2",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "port3",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "port4",
-+ },
-+ },
-+ },
-+};
-+
- static struct sprom_fixup __initdata vr3025u_fixups[] = {
- { .offset = 97, .value = 0xfeb3 },
- { .offset = 98, .value = 0x1618 },
-@@ -2283,6 +2329,7 @@ static const struct board_info __initcon
- &board_96368mvwg,
- &board_96368mvngr,
- &board_DGND3700v1_3800B,
-+ &board_HG655b,
- &board_P870HW51A_V2,
- &board_VR3025u,
- &board_VR3025un,
-@@ -2389,6 +2436,7 @@ static struct of_device_id const bcm963x
- { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
- { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
- { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
-+ { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, },
- { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
- { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
- #endif /* CONFIG_BCM63XX_CPU_6368 */
diff --git a/target/linux/bcm63xx/patches-5.4/659-board_bcm6368-comtrend-vr-3026e.patch b/target/linux/bcm63xx/patches-5.4/659-board_bcm6368-comtrend-vr-3026e.patch
deleted file mode 100644
index 4be53d10ab..0000000000
--- a/target/linux/bcm63xx/patches-5.4/659-board_bcm6368-comtrend-vr-3026e.patch
+++ /dev/null
@@ -1,78 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2198,6 +2198,59 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct sprom_fixup __initdata vr3026e_fixups[] = {
-+ { .offset = 97, .value = 0xfeb3 },
-+ { .offset = 98, .value = 0x1618 },
-+ { .offset = 99, .value = 0xfab0 },
-+ { .offset = 113, .value = 0xfed1 },
-+ { .offset = 114, .value = 0x1609 },
-+ { .offset = 115, .value = 0xfad9 },
-+};
-+
-+static struct board_info __initdata board_VR3026e = {
-+ .name = "96368MT-1341N1",
-+ .expected_cpu_id = 0x6368,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "port1",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "port2",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "port3",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "port4",
-+ },
-+ },
-+ },
-+
-+ .use_fallback_sprom = 1,
-+ .fallback_sprom = {
-+ .type = SPROM_BCM43222,
-+ .pci_bus = 0,
-+ .pci_dev = 1,
-+ .board_fixups = vr3026e_fixups,
-+ .num_board_fixups = ARRAY_SIZE(vr3026e_fixups),
-+ },
-+};
-+
- static struct sprom_fixup __initdata wap5813n_fixups[] = {
- { .offset = 97, .value = 0xfeed },
- { .offset = 98, .value = 0x15d1 },
-@@ -2333,6 +2386,7 @@ static const struct board_info __initcon
- &board_P870HW51A_V2,
- &board_VR3025u,
- &board_VR3025un,
-+ &board_VR3026e,
- &board_WAP5813n,
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- };
-@@ -2435,6 +2489,7 @@ static struct of_device_id const bcm963x
- { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
- { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
- { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
-+ { .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, },
- { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
- { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, },
- { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
diff --git a/target/linux/bcm63xx/patches-5.4/660-board_bcm6368-huawei-echolife-hg622.patch b/target/linux/bcm63xx/patches-5.4/660-board_bcm6368-huawei-echolife-hg622.patch
deleted file mode 100644
index c025a45eeb..0000000000
--- a/target/linux/bcm63xx/patches-5.4/660-board_bcm6368-huawei-echolife-hg622.patch
+++ /dev/null
@@ -1,71 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2050,6 +2050,52 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct board_info __initdata board_HG622 = {
-+ .name = "96368MVWG_hg622",
-+ .expected_cpu_id = 0x6368,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 2,
-+
-+ .has_caldata = 1,
-+ .caldata = {
-+ {
-+ .vendor = PCI_VENDOR_ID_RALINK,
-+ .caldata_offset = 0xfa0000,
-+ .slot = 1,
-+ .eeprom = "rt2x00.eeprom",
-+ },
-+ },
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "port1",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "port2",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "port3",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "port4",
-+ },
-+ },
-+ },
-+};
-+
- static struct sprom_fixup __initdata vr3025u_fixups[] = {
- { .offset = 97, .value = 0xfeb3 },
- { .offset = 98, .value = 0x1618 },
-@@ -2382,6 +2428,7 @@ static const struct board_info __initcon
- &board_96368mvwg,
- &board_96368mvngr,
- &board_DGND3700v1_3800B,
-+ &board_HG622,
- &board_HG655b,
- &board_P870HW51A_V2,
- &board_VR3025u,
-@@ -2491,6 +2538,7 @@ static struct of_device_id const bcm963x
- { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
- { .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, },
- { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
-+ { .compatible = "huawei,echolife-hg622", .data = &board_HG622, },
- { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, },
- { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
- { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
diff --git a/target/linux/bcm63xx/patches-5.4/661-board_bcm6369-netgear-evg2000.patch b/target/linux/bcm63xx/patches-5.4/661-board_bcm6369-netgear-evg2000.patch
deleted file mode 100644
index b33cb3a1ce..0000000000
--- a/target/linux/bcm63xx/patches-5.4/661-board_bcm6369-netgear-evg2000.patch
+++ /dev/null
@@ -1,62 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2004,6 +2004,43 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct sprom_fixup __initdata EVG2000_fixups[] = {
-+ { .offset = 219, .value = 0xec08 },
-+};
-+
-+static struct board_info __initdata board_EVG2000 = {
-+ .name = "96369PVG",
-+ .expected_cpu_id = 0x6368,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 2,
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [5] = {
-+ .used = 1,
-+ .phy_id = 0xff,
-+ .bypass_link = 1,
-+ .force_speed = 1000,
-+ .force_duplex_full = 1,
-+ .name = "RGMII",
-+ },
-+ },
-+ },
-+
-+ .use_fallback_sprom = 1,
-+ .fallback_sprom = {
-+ .type = SPROM_BCM4322,
-+ .pci_bus = 0,
-+ .pci_dev = 1,
-+ .board_fixups = EVG2000_fixups,
-+ .num_board_fixups = ARRAY_SIZE(EVG2000_fixups),
-+ },
-+};
-+
- static struct board_info __initdata board_HG655b = {
- .name = "HW65x",
- .expected_cpu_id = 0x6368,
-@@ -2428,6 +2465,7 @@ static const struct board_info __initcon
- &board_96368mvwg,
- &board_96368mvngr,
- &board_DGND3700v1_3800B,
-+ &board_EVG2000,
- &board_HG622,
- &board_HG655b,
- &board_P870HW51A_V2,
-@@ -2541,6 +2579,7 @@ static struct of_device_id const bcm963x
- { .compatible = "huawei,echolife-hg622", .data = &board_HG622, },
- { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, },
- { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
-+ { .compatible = "netgear,evg2000", .data = &board_EVG2000, },
- { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/bcm63xx/patches-5.4/662-board_bcm6368-adb-av4202n.patch b/target/linux/bcm63xx/patches-5.4/662-board_bcm6368-adb-av4202n.patch
deleted file mode 100644
index 5f224e5bd4..0000000000
--- a/target/linux/bcm63xx/patches-5.4/662-board_bcm6368-adb-av4202n.patch
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1904,6 +1904,49 @@ static struct board_info __initdata boar
- * known 6368 boards
- */
- #ifdef CONFIG_BCM63XX_CPU_6368
-+static struct board_info __initdata board_AV4202N = {
-+ .name = "96368_Swiss_S1",
-+ .expected_cpu_id = 0x6368,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 2,
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "port1",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "port2",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "port3",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "port4",
-+ },
-+ },
-+ },
-+
-+ .use_fallback_sprom = 1,
-+ .fallback_sprom = {
-+ .type = SPROM_BCM4322,
-+ .pci_bus = 0,
-+ .pci_dev = 1,
-+ },
-+};
-+
- static struct board_info __initdata board_96368mvwg = {
- .name = "96368MVWG",
- .expected_cpu_id = 0x6368,
-@@ -2462,6 +2505,7 @@ static const struct board_info __initcon
- &board_hg253s_v2,
- #endif /* CONFIG_BCM63XX_CPU_6362 */
- #ifdef CONFIG_BCM63XX_CPU_6368
-+ &board_AV4202N,
- &board_96368mvwg,
- &board_96368mvngr,
- &board_DGND3700v1_3800B,
-@@ -2570,6 +2614,7 @@ static struct of_device_id const bcm963x
- { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, },
- #endif /* CONFIG_BCM63XX_CPU_6362 */
- #ifdef CONFIG_BCM63XX_CPU_6368
-+ { .compatible = "adb,av4202n", .data = &board_AV4202N, },
- { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
- { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
- { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
diff --git a/target/linux/bcm63xx/patches-5.4/663-board_bcm6368-observa-vh4032n.patch b/target/linux/bcm63xx/patches-5.4/663-board_bcm6368-observa-vh4032n.patch
deleted file mode 100644
index d2b0a44c29..0000000000
--- a/target/linux/bcm63xx/patches-5.4/663-board_bcm6368-observa-vh4032n.patch
+++ /dev/null
@@ -1,125 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2377,6 +2377,106 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct sprom_fixup __initdata vh4032n_fixups[] = {
-+ { .offset = 2, .value = 0x04d2 },
-+ { .offset = 4, .value = 0x4350 },
-+ { .offset = 65, .value = 0x1300 },
-+ { .offset = 68, .value = 0x0402 },
-+ { .offset = 70, .value = 0x0090 },
-+ { .offset = 71, .value = 0x4c19 },
-+ { .offset = 72, .value = 0x2345 },
-+ { .offset = 87, .value = 0x0315 },
-+ { .offset = 88, .value = 0x0315 },
-+ { .offset = 96, .value = 0x2048 },
-+ { .offset = 97, .value = 0xfed7 },
-+ { .offset = 98, .value = 0x15a6 },
-+ { .offset = 99, .value = 0xfaee },
-+ { .offset = 100, .value = 0x3e3a },
-+ { .offset = 101, .value = 0x3a36 },
-+ { .offset = 102, .value = 0xff7f },
-+ { .offset = 103, .value = 0x11b9 },
-+ { .offset = 104, .value = 0xfc53 },
-+ { .offset = 105, .value = 0xffe6 },
-+ { .offset = 106, .value = 0xfdd2 },
-+ { .offset = 107, .value = 0xfe49 },
-+ { .offset = 108, .value = 0xff6a },
-+ { .offset = 109, .value = 0x136e },
-+ { .offset = 110, .value = 0xfbed },
-+ { .offset = 111, .value = 0x0000 },
-+ { .offset = 112, .value = 0x2048 },
-+ { .offset = 113, .value = 0xfee2 },
-+ { .offset = 114, .value = 0x15e5 },
-+ { .offset = 115, .value = 0xfaed },
-+ { .offset = 116, .value = 0x3e3a },
-+ { .offset = 117, .value = 0x3a36 },
-+ { .offset = 118, .value = 0xffc8 },
-+ { .offset = 119, .value = 0x12b8 },
-+ { .offset = 120, .value = 0xfca1 },
-+ { .offset = 121, .value = 0xff9b },
-+ { .offset = 122, .value = 0x122a },
-+ { .offset = 123, .value = 0xfcc8 },
-+ { .offset = 124, .value = 0xff95 },
-+ { .offset = 125, .value = 0x146b },
-+ { .offset = 126, .value = 0xfbba },
-+ { .offset = 127, .value = 0x0000 },
-+ { .offset = 161, .value = 0x0000 },
-+ { .offset = 162, .value = 0x0000 },
-+ { .offset = 169, .value = 0x0000 },
-+ { .offset = 170, .value = 0x0000 },
-+ { .offset = 171, .value = 0x0000 },
-+ { .offset = 172, .value = 0x0000 },
-+ { .offset = 173, .value = 0x0000 },
-+ { .offset = 174, .value = 0x0000 },
-+ { .offset = 175, .value = 0x0000 },
-+ { .offset = 176, .value = 0x0000 },
-+ { .offset = 219, .value = 0x1108 },
-+};
-+
-+static struct board_info __initdata board_VH4032N = {
-+ .name = "VH4032N",
-+ .expected_cpu_id = 0x6368,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 2,
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "LAN4",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "LAN3",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "LAN2",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "LAN1",
-+ },
-+ },
-+ },
-+
-+ .use_fallback_sprom = 1,
-+ .fallback_sprom = {
-+ .type = SPROM_BCM43222,
-+ .pci_bus = 0,
-+ .pci_dev = 1,
-+ .board_fixups = vh4032n_fixups,
-+ .num_board_fixups = ARRAY_SIZE(vh4032n_fixups),
-+ },
-+};
-+
- static struct sprom_fixup __initdata wap5813n_fixups[] = {
- { .offset = 97, .value = 0xfeed },
- { .offset = 98, .value = 0x15d1 },
-@@ -2513,6 +2613,7 @@ static const struct board_info __initcon
- &board_HG622,
- &board_HG655b,
- &board_P870HW51A_V2,
-+ &board_VH4032N,
- &board_VR3025u,
- &board_VR3025un,
- &board_VR3026e,
-@@ -2625,6 +2726,7 @@ static struct of_device_id const bcm963x
- { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, },
- { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
- { .compatible = "netgear,evg2000", .data = &board_EVG2000, },
-+ { .compatible = "observa,vh4032n", .data = &board_VH4032N, },
- { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/bcm63xx/patches-5.4/664-board_bcm6368-actiontec-r1000h.patch b/target/linux/bcm63xx/patches-5.4/664-board_bcm6368-actiontec-r1000h.patch
deleted file mode 100644
index 716a6e030f..0000000000
--- a/target/linux/bcm63xx/patches-5.4/664-board_bcm6368-actiontec-r1000h.patch
+++ /dev/null
@@ -1,48 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2227,6 +2227,29 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct board_info __initdata board_R1000H = {
-+ .name = "R1000H",
-+ .expected_cpu_id = 0x6368,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [5] = {
-+ .used = 1,
-+ .phy_id = 0xff,
-+ .bypass_link = 1,
-+ .force_speed = 1000,
-+ .force_duplex_full = 1,
-+ .name = "RGMII",
-+ },
-+ },
-+ },
-+};
-+
- static struct board_info __initdata board_VR3025u = {
- .name = "96368M-1541N",
- .expected_cpu_id = 0x6368,
-@@ -2613,6 +2636,7 @@ static const struct board_info __initcon
- &board_HG622,
- &board_HG655b,
- &board_P870HW51A_V2,
-+ &board_R1000H,
- &board_VH4032N,
- &board_VR3025u,
- &board_VR3025un,
-@@ -2715,6 +2739,7 @@ static struct of_device_id const bcm963x
- { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, },
- #endif /* CONFIG_BCM63XX_CPU_6362 */
- #ifdef CONFIG_BCM63XX_CPU_6368
-+ { .compatible = "actiontec,r1000h", .data = &board_R1000H, },
- { .compatible = "adb,av4202n", .data = &board_AV4202N, },
- { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
- { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
diff --git a/target/linux/bcm63xx/patches-5.4/681-board_bcm63269-brcm-bcm963269bhr.patch b/target/linux/bcm63xx/patches-5.4/681-board_bcm63269-brcm-bcm963269bhr.patch
deleted file mode 100644
index a064234114..0000000000
--- a/target/linux/bcm63xx/patches-5.4/681-board_bcm63269-brcm-bcm963269bhr.patch
+++ /dev/null
@@ -1,67 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2543,6 +2543,46 @@ static struct board_info __initdata boar
- #endif /* CONFIG_BCM63XX_CPU_6368 */
-
- /*
-+ * known 63268/63269 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_63268
-+static struct board_info __initdata board_963269bhr = {
-+ .name = "963269BHR",
-+ .expected_cpu_id = 0x63268,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "port1",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "port2",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "port3",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "port4",
-+ },
-+ },
-+ },
-+};
-+#endif /* CONFIG_BCM63XX_CPU_63268 */
-+
-+/*
- * all boards
- */
- static const struct board_info __initconst *bcm963xx_boards[] = {
-@@ -2643,6 +2683,9 @@ static const struct board_info __initcon
- &board_VR3026e,
- &board_WAP5813n,
- #endif /* CONFIG_BCM63XX_CPU_6368 */
-+#ifdef CONFIG_BCM63XX_CPU_63268
-+ &board_963269bhr,
-+#endif /* CONFIG_BCM63XX_CPU_63268 */
- };
-
- static struct of_device_id const bcm963xx_boards_dt[] = {
-@@ -2755,6 +2798,7 @@ static struct of_device_id const bcm963x
- { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- #ifdef CONFIG_BCM63XX_CPU_63268
-+ { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
- #endif /* CONFIG_BCM63XX_CPU_63268 */
- #endif /* CONFIG_OF */
- { },
diff --git a/target/linux/bcm63xx/patches-5.4/682-board_bcm63268-inteno-vg50.patch b/target/linux/bcm63xx/patches-5.4/682-board_bcm63268-inteno-vg50.patch
deleted file mode 100644
index 1275af5c22..0000000000
--- a/target/linux/bcm63xx/patches-5.4/682-board_bcm63268-inteno-vg50.patch
+++ /dev/null
@@ -1,67 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2580,6 +2580,48 @@ static struct board_info __initdata boar
- },
- },
- };
-+
-+static struct board_info __initdata board_vw6339gu = {
-+ .name = "VW6339GU",
-+ .expected_cpu_id = 0x63268,
-+
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 1,
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "LAN2",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "LAN3",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "LAN4",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "LAN1",
-+ },
-+ [4] = {
-+ .used = 1,
-+ .phy_id = 7,
-+ .name = "WAN",
-+ .mii_override = 1,
-+ .timing_sel = 1,
-+ },
-+ },
-+ },
-+};
- #endif /* CONFIG_BCM63XX_CPU_63268 */
-
- /*
-@@ -2685,6 +2727,7 @@ static const struct board_info __initcon
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- #ifdef CONFIG_BCM63XX_CPU_63268
- &board_963269bhr,
-+ &board_vw6339gu,
- #endif /* CONFIG_BCM63XX_CPU_63268 */
- };
-
-@@ -2799,6 +2842,7 @@ static struct of_device_id const bcm963x
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- #ifdef CONFIG_BCM63XX_CPU_63268
- { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
-+ { .compatible = "inteno,vg50", .data = &board_vw6339gu, },
- #endif /* CONFIG_BCM63XX_CPU_63268 */
- #endif /* CONFIG_OF */
- { },
diff --git a/target/linux/bcm63xx/patches-5.4/683-board_bcm63268-brcm-bcm963268bu-p300.patch b/target/linux/bcm63xx/patches-5.4/683-board_bcm63268-brcm-bcm963268bu-p300.patch
deleted file mode 100644
index c75d7a477e..0000000000
--- a/target/linux/bcm63xx/patches-5.4/683-board_bcm63268-brcm-bcm963268bu-p300.patch
+++ /dev/null
@@ -1,84 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2546,6 +2546,65 @@ static struct board_info __initdata boar
- * known 63268/63269 boards
- */
- #ifdef CONFIG_BCM63XX_CPU_63268
-+static struct board_info __initdata board_963268bu_p300 = {
-+ .name = "963268BU_P300",
-+ .expected_cpu_id = 0x63268,
-+
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 1,
-+
-+ .has_usbd = 1,
-+ .usbd = {
-+ .use_fullspeed = 0,
-+ .port_no = 0,
-+ },
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 17,
-+ .name = "FE1",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "GbE2",
-+ },
-+ [4] = {
-+ .used = 1,
-+ .phy_id = 0,
-+ .name = "GbE3",
-+ .mii_override = 1,
-+ .timing_sel = 1,
-+ },
-+ [5] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "GbE1",
-+ .mii_override = 1,
-+ .timing_sel = 1,
-+ },
-+ [6] = {
-+ .used = 1,
-+ .phy_id = 24,
-+ .name = "GbE4",
-+ .mii_override = 1,
-+ .timing_sel = 1,
-+ },
-+ [7] = {
-+ .used = 1,
-+ .phy_id = 25,
-+ .name = "GbE5",
-+ .mii_override = 1,
-+ .timing_sel = 1,
-+ },
-+ },
-+ },
-+};
-+
- static struct board_info __initdata board_963269bhr = {
- .name = "963269BHR",
- .expected_cpu_id = 0x63268,
-@@ -2726,6 +2785,7 @@ static const struct board_info __initcon
- &board_WAP5813n,
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- #ifdef CONFIG_BCM63XX_CPU_63268
-+ &board_963268bu_p300,
- &board_963269bhr,
- &board_vw6339gu,
- #endif /* CONFIG_BCM63XX_CPU_63268 */
-@@ -2841,6 +2901,7 @@ static struct of_device_id const bcm963x
- { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- #ifdef CONFIG_BCM63XX_CPU_63268
-+ { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, },
- { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
- { .compatible = "inteno,vg50", .data = &board_vw6339gu, },
- #endif /* CONFIG_BCM63XX_CPU_63268 */
diff --git a/target/linux/bcm63xx/patches-5.4/684-board_bcm63168-sky-sr102.patch b/target/linux/bcm63xx/patches-5.4/684-board_bcm63168-sky-sr102.patch
deleted file mode 100644
index 7f1fb58a32..0000000000
--- a/target/linux/bcm63xx/patches-5.4/684-board_bcm63168-sky-sr102.patch
+++ /dev/null
@@ -1,61 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2681,6 +2681,42 @@ static struct board_info __initdata boar
- },
- },
- };
-+
-+static struct board_info __initdata board_BSKYB_63168 = {
-+ .name = "BSKYB_63168",
-+ .expected_cpu_id = 0x63268,
-+
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 2,
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "Port 1",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "Port 2",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "Port 3",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "Port 4",
-+ },
-+ },
-+ },
-+};
- #endif /* CONFIG_BCM63XX_CPU_63268 */
-
- /*
-@@ -2788,6 +2824,7 @@ static const struct board_info __initcon
- &board_963268bu_p300,
- &board_963269bhr,
- &board_vw6339gu,
-+ &board_BSKYB_63168,
- #endif /* CONFIG_BCM63XX_CPU_63268 */
- };
-
-@@ -2904,6 +2941,7 @@ static struct of_device_id const bcm963x
- { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, },
- { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
- { .compatible = "inteno,vg50", .data = &board_vw6339gu, },
-+ { .compatible = "sky,sr102", .data = &board_BSKYB_63168, },
- #endif /* CONFIG_BCM63XX_CPU_63268 */
- #endif /* CONFIG_OF */
- { },
diff --git a/target/linux/bcm63xx/patches-5.4/685-board-bcm63168-comtrend-vr-3032u.patch b/target/linux/bcm63xx/patches-5.4/685-board-bcm63168-comtrend-vr-3032u.patch
deleted file mode 100644
index af4c5388cc..0000000000
--- a/target/linux/bcm63xx/patches-5.4/685-board-bcm63168-comtrend-vr-3032u.patch
+++ /dev/null
@@ -1,60 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2640,6 +2640,41 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct board_info __initdata board_VR3032u = {
-+ .name = "963168M-1841N1",
-+ .expected_cpu_id = 0x63268,
-+
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 1,
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "LAN2",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "LAN3",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "LAN4",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "LAN1",
-+ },
-+ },
-+ },
-+};
-+
- static struct board_info __initdata board_vw6339gu = {
- .name = "VW6339GU",
- .expected_cpu_id = 0x63268,
-@@ -2823,6 +2858,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_63268
- &board_963268bu_p300,
- &board_963269bhr,
-+ &board_VR3032u,
- &board_vw6339gu,
- &board_BSKYB_63168,
- #endif /* CONFIG_BCM63XX_CPU_63268 */
-@@ -2940,6 +2976,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_63268
- { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, },
- { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
-+ { .compatible = "comtrend,vr-3032u", .data = &board_VR3032u, },
- { .compatible = "inteno,vg50", .data = &board_vw6339gu, },
- { .compatible = "sky,sr102", .data = &board_BSKYB_63168, },
- #endif /* CONFIG_BCM63XX_CPU_63268 */
diff --git a/target/linux/bcm63xx/patches-5.4/686-board-bcm63169-comtrend-vg-8050.patch b/target/linux/bcm63xx/patches-5.4/686-board-bcm63169-comtrend-vg-8050.patch
deleted file mode 100644
index b55b4d3701..0000000000
--- a/target/linux/bcm63xx/patches-5.4/686-board-bcm63169-comtrend-vg-8050.patch
+++ /dev/null
@@ -1,50 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2640,6 +2640,31 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct board_info __initdata board_VG8050 = {
-+ .name = "963169P-1861N5",
-+ .expected_cpu_id = 0x63268,
-+
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 2,
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [6] = {
-+ .used = 1,
-+ .phy_id = 0xff,
-+ .bypass_link = 1,
-+ .force_speed = 1000,
-+ .force_duplex_full = 1,
-+ .mii_override = 1,
-+ .timing_sel = 1,
-+ .name = "RGMII",
-+ },
-+ },
-+ },
-+};
-+
- static struct board_info __initdata board_VR3032u = {
- .name = "963168M-1841N1",
- .expected_cpu_id = 0x63268,
-@@ -2858,6 +2883,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_63268
- &board_963268bu_p300,
- &board_963269bhr,
-+ &board_VG8050,
- &board_VR3032u,
- &board_vw6339gu,
- &board_BSKYB_63168,
-@@ -2976,6 +3002,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_63268
- { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, },
- { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
-+ { .compatible = "comtrend,vg-8050", .data = &board_VG8050, },
- { .compatible = "comtrend,vr-3032u", .data = &board_VR3032u, },
- { .compatible = "inteno,vg50", .data = &board_vw6339gu, },
- { .compatible = "sky,sr102", .data = &board_BSKYB_63168, },
diff --git a/target/linux/bcm63xx/patches-5.4/687-board-bcm63167-sercomm-h500-s.patch b/target/linux/bcm63xx/patches-5.4/687-board-bcm63167-sercomm-h500-s.patch
deleted file mode 100644
index 5bcb50672d..0000000000
--- a/target/linux/bcm63xx/patches-5.4/687-board-bcm63167-sercomm-h500-s.patch
+++ /dev/null
@@ -1,56 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2777,6 +2777,36 @@ static struct board_info __initdata boar
- },
- },
- };
-+
-+static struct board_info __initdata board_H500s = {
-+ .name = "BXK00C-1.6",
-+ .expected_cpu_id = 0x63268,
-+
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .num_usbh_ports = 1,
-+
-+ .has_enetsw = 1,
-+ .enetsw = {
-+ .used_ports = {
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 12,
-+ .name = "WAN",
-+ },
-+ [4] = {
-+ .used = 1,
-+ .phy_id = 0,
-+ .bypass_link = 1,
-+ .force_speed = 1000,
-+ .force_duplex_full = 1,
-+ .mii_override = 1,
-+ .timing_sel = 1,
-+ .name = "RGMII",
-+ },
-+ },
-+ },
-+};
- #endif /* CONFIG_BCM63XX_CPU_63268 */
-
- /*
-@@ -2887,6 +2917,7 @@ static const struct board_info __initcon
- &board_VR3032u,
- &board_vw6339gu,
- &board_BSKYB_63168,
-+ &board_H500s,
- #endif /* CONFIG_BCM63XX_CPU_63268 */
- };
-
-@@ -3005,6 +3036,8 @@ static struct of_device_id const bcm963x
- { .compatible = "comtrend,vg-8050", .data = &board_VG8050, },
- { .compatible = "comtrend,vr-3032u", .data = &board_VR3032u, },
- { .compatible = "inteno,vg50", .data = &board_vw6339gu, },
-+ { .compatible = "sercomm,h500-s-lowi", .data = &board_H500s, },
-+ { .compatible = "sercomm,h500-s-vfes", .data = &board_H500s, },
- { .compatible = "sky,sr102", .data = &board_BSKYB_63168, },
- #endif /* CONFIG_BCM63XX_CPU_63268 */
- #endif /* CONFIG_OF */
More information about the lede-commits
mailing list