[openwrt/openwrt] ramips: add support for the Hak5 WiFi Pineapple Mark 7
LEDE Commits
lede-commits at lists.infradead.org
Wed Nov 18 20:01:29 EST 2020
pepe2k pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/f276395cda79996d395209700a51bb94a0e25abd
commit f276395cda79996d395209700a51bb94a0e25abd
Author: Marc Egerton <foxtrot at realloc.me>
AuthorDate: Fri Oct 2 18:30:59 2020 +0100
ramips: add support for the Hak5 WiFi Pineapple Mark 7
This patch adds support for the WiFi Pineapple Mark 7, a wireless
penetration testing tool.
Specifications:
* SoC: MediaTek MT7628 (580MHz)
* RAM: 256MiB (DDR2)
* Storage 1: 32MiB NOR (SPI)
* Storage 2: 2GB eMMC
* Wireless 1: 802.11b/g/n 2.4GHz (Built In)
* Wireless 2: 802.11b/g/n 2.4GHz (MT7601)
* Wireless 3: 802.11b/g/n 2.4GHz (MT7601)
* USB: 1x USB Type-A 2.0 Host Port
* Ethernet: 1x USB Type-C AX88772C Ethernet
* UART: 57600 8N1 on PCB
* Inputs: 1x Reset Button
* Outputs: 1x RGB LED
* FCCID: 2AA52MK7
Flash Instructions:
Original firmware is based on OpenWRT.
Use sysupgrade via SSH to flash.
Signed-off-by: Marc Egerton <foxtrot at realloc.me>
[pepe2k at gmail.com: set only required/used gpio groups to gpio function]
Signed-off-by: Piotr Dymacz <pepe2k at gmail.com>
---
.../dts/mt7628an_hak5_wifi-pineapple-mk7.dts | 124 +++++++++++++++++++++
target/linux/ramips/image/mt76x8.mk | 9 ++
.../mt76x8/base-files/etc/board.d/02_network | 1 +
3 files changed, 134 insertions(+)
diff --git a/target/linux/ramips/dts/mt7628an_hak5_wifi-pineapple-mk7.dts b/target/linux/ramips/dts/mt7628an_hak5_wifi-pineapple-mk7.dts
new file mode 100644
index 0000000000..2ef0422925
--- /dev/null
+++ b/target/linux/ramips/dts/mt7628an_hak5_wifi-pineapple-mk7.dts
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7628an.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "hak5,wifi-pineapple-mk7", "mediatek,mt7628an-soc";
+ model = "Hak5 WiFi Pineapple Mark 7";
+
+ aliases {
+ led-boot = &led_system_blue;
+ led-failsafe = &led_system_blue;
+ led-upgrade = &led_system_blue;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ system_red {
+ label = "red:system";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ system_green {
+ label = "green:system";
+ gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_system_blue: system_blue {
+ label = "blue:system";
+ gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usb-power {
+ gpio-export,name = "usb-power";
+ gpio-export,output = <1>;
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ sdhci at 10130000 {
+ compatible = "ralink,mt7620-sdhci";
+ reg = <0x10130000 4000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <14>;
+
+ status = "okay";
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "gpio", "i2c", "i2s";
+ function = "gpio";
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition at 30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition at 40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition at 50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x1fb0000>;
+ };
+ };
+ };
+};
+
+ðernet {
+ status = "okay";
+
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&wmac {
+ status = "okay";
+};
diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk
index 6327c95bb0..5459288341 100644
--- a/target/linux/ramips/image/mt76x8.mk
+++ b/target/linux/ramips/image/mt76x8.mk
@@ -119,6 +119,15 @@ define Device/glinet_vixmini
endef
TARGET_DEVICES += glinet_vixmini
+define Device/hak5_wifi-pineapple-mk7
+ IMAGE_SIZE := 32448k
+ DEVICE_VENDOR := Hak5
+ DEVICE_MODEL := WiFi Pineapple Mark 7
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
+ SUPPORTED_DEVICES += wifi-pineapple-mk7
+endef
+TARGET_DEVICES += hak5_wifi-pineapple-mk7
+
define Device/hilink_hlk-7628n
IMAGE_SIZE := 32448k
DEVICE_VENDOR := HILINK
diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
index 2cda818b2a..a6272e5a55 100755
--- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
@@ -13,6 +13,7 @@ ramips_setup_interfaces()
d-team,pbr-d1|\
glinet,microuter-n300|\
glinet,vixmini|\
+ hak5,wifi-pineapple-mk7|\
mediatek,linkit-smart-7688|\
onion,omega2p|\
onion,omega2|\
More information about the lede-commits
mailing list