[openwrt/openwrt] ath79: add support for Qxwlan E600G v2 / E600GAC v2
LEDE Commits
lede-commits at lists.infradead.org
Thu Nov 12 11:18:38 EST 2020
adrian pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/448de2e2e5c2c00a11bdf08147ee85242b2d48d2
commit 448de2e2e5c2c00a11bdf08147ee85242b2d48d2
Author: 张鹏 <sd20 at qxwlan.com>
AuthorDate: Sat Oct 31 09:35:21 2020 +0800
ath79: add support for Qxwlan E600G v2 / E600GAC v2
E600G v2 based on Qualcomm/Atheros QCA9531
Specification:
- 650/600/200 MHz (CPU/DDR/AHB)
- 128/64 MB of RAM (DDR2)
- 8/16 MB of FLASH (SPI NOR)
- 2T2R 2.4 GHz
- 2 x 10/100 Mbps Ethernet(RJ45)
- 1 x MiniPCI-e
- 1 x SIM (3G/4G)
- 5 x LED , 1 x Button(SW2-Reset Buttun), 1 x power input
- UART(J100) header on PCB(115200 8N1)
E600GAC v2 based on Qualcomm/Atheros QCA9531 + QCA9887
Specification:
- 650/600/200 MHz (CPU/DDR/AHB)
- 128/64 MB of RAM (DDR2)
- 8/16 MB of FLASH (SPI NOR)
- 2T2R 2.4 GHz
- 1T1R 5 GHz
- 2 x 10/100 Mbps Ethernet(RJ45)
- 6 x LED (one three-color led), 2 x Button(SW2-Reset Buttun),1 x power input
- UART (J100)header on PCB(115200 8N1)
Flash instruction:
1.Using tftp mode with UART connection and original OpenWrt image
- Configure PC with static IP 192.168.1.10 and tftp server.
- Rename "openwrt-ath79-generic-xxx-squashfs-sysupgrade.bin"
to "firmware.bin" and place it in tftp server directory.
- Connect PC with one of LAN ports, power up the router and press
key "Enter" to access U-Boot CLI.
- Use the following commands to update the device to OpenWrt:
run lfw
- After that the device will reboot and boot to OpenWrt.
- Wait until all LEDs stops flashing and use the router.
2.Using httpd mode with Web UI connection and original OpenWrt image
- Configure PC with static IP 192.168.1.xxx(2-255) and tftp server.
- Connect PC with one of LAN ports,press the reset button, power up
the router and keep button pressed for around 6-7 seconds, until
leds flashing.
- Open your browser and enter 192.168.1.1,You will see the upgrade
interface, select "openwrt-ath79-generic-xxx-squashfs-
sysupgrade.bin" and click the upgrade button.
- After that the device will reboot and boot to OpenWrt.
- Wait until all LEDs stops flashing and use the router.
Signed-off-by: 张鹏 <sd20 at qxwlan.com>
[rearrange in generic.mk, fix one case in 04_led_migration, update
commit message]
Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
---
.../ath79/dts/qca9531_qxwlan_e600g-v2-16m.dts | 32 ++++++
.../linux/ath79/dts/qca9531_qxwlan_e600g-v2-8m.dts | 32 ++++++
target/linux/ath79/dts/qca9531_qxwlan_e600g.dtsi | 114 +++++++++++++++++++++
.../ath79/dts/qca9531_qxwlan_e600gac-v2-16m.dts | 48 +++++++++
.../ath79/dts/qca9531_qxwlan_e600gac-v2-8m.dts | 48 +++++++++
.../ath79/generic/base-files/etc/board.d/01_leds | 4 +
.../etc/hotplug.d/firmware/11-ath10k-caldata | 2 +
.../base-files/etc/uci-defaults/04_led_migration | 8 ++
target/linux/ath79/image/generic.mk | 44 ++++++++
9 files changed, 332 insertions(+)
diff --git a/target/linux/ath79/dts/qca9531_qxwlan_e600g-v2-16m.dts b/target/linux/ath79/dts/qca9531_qxwlan_e600g-v2-16m.dts
new file mode 100644
index 0000000000..9b4c0a514d
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_qxwlan_e600g-v2-16m.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9531_qxwlan_e600g.dtsi"
+
+/ {
+ model = "Qxwlan E600G v2 16M";
+ compatible = "qxwlan,e600g-v2-16m", "qca,qca9531";
+};
+
+&leds {
+ wlan {
+ label = "blue:wlan";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+};
+
+&partitions {
+ partition at 70000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x070000 0xf90000>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/qca9531_qxwlan_e600g-v2-8m.dts b/target/linux/ath79/dts/qca9531_qxwlan_e600g-v2-8m.dts
new file mode 100644
index 0000000000..7822ec664a
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_qxwlan_e600g-v2-8m.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9531_qxwlan_e600g.dtsi"
+
+/ {
+ model = "Qxwlan E600G v2 8M";
+ compatible = "qxwlan,e600g-v2-8m", "qca,qca9531";
+};
+
+&leds {
+ wlan {
+ label = "blue:wlan";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+};
+
+&partitions {
+ partition at 70000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x070000 0x790000>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/qca9531_qxwlan_e600g.dtsi b/target/linux/ath79/dts/qca9531_qxwlan_e600g.dtsi
new file mode 100644
index 0000000000..6ba4ae8fdf
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_qxwlan_e600g.dtsi
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ label-mac-device = ð0;
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ keys: keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "blue:system";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wan {
+ label = "green:wan";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition at 40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ pridata: partition at 50000 {
+ label = "pri-data";
+ reg = <0x050000 0x010000>;
+ read-only;
+ };
+
+ art: partition at 60000 {
+ label = "art";
+ reg = <0x060000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&pridata 0x400>;
+ mtd-mac-address-increment = <1>;
+};
+
+ð1 {
+ mtd-mac-address = <&pridata 0x400>;
+};
+
+&uart {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/dts/qca9531_qxwlan_e600gac-v2-16m.dts b/target/linux/ath79/dts/qca9531_qxwlan_e600gac-v2-16m.dts
new file mode 100644
index 0000000000..4be24986df
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_qxwlan_e600gac-v2-16m.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9531_qxwlan_e600g.dtsi"
+
+/ {
+ model = "Qxwlan E600GAC v2 16M";
+ compatible = "qxwlan,e600gac-v2-16m", "qca,qca9531";
+};
+
+&keys {
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+};
+
+&leds {
+ wlan2g {
+ label = "orange:wlan2g";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ control1 {
+ label = "green:control";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ control2 {
+ label = "red:control";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ control3 {
+ label = "blue:control";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&partitions {
+ partition at 70000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x070000 0xf90000>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9531_qxwlan_e600gac-v2-8m.dts b/target/linux/ath79/dts/qca9531_qxwlan_e600gac-v2-8m.dts
new file mode 100644
index 0000000000..826c46b2a1
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_qxwlan_e600gac-v2-8m.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9531_qxwlan_e600g.dtsi"
+
+/ {
+ model = "Qxwlan E600GAC v2 8M";
+ compatible = "qxwlan,e600gac-v2-8m", "qca,qca9531";
+};
+
+&keys {
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+};
+
+&leds {
+ wlan2g {
+ label = "orange:wlan2g";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ control1 {
+ label = "green:control";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ control2 {
+ label = "red:control";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ control3 {
+ label = "blue:control";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&partitions {
+ partition at 70000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x070000 0x790000>;
+ };
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index 0c130e329e..227e64678d 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -195,6 +195,10 @@ etactica,eg200)
ucidef_set_led_oneshot "modbus" "Modbus" "red:modbus" "100" "33"
;;
glinet,gl-mifi|\
+qxwlan,e600g-v2-8m|\
+qxwlan,e600g-v2-16m|\
+qxwlan,e600gac-v2-8m|\
+qxwlan,e600gac-v2-16m|\
qxwlan,e750a-v4-8m|\
qxwlan,e750a-v4-16m)
ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x02"
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 25e864ba72..e968658cac 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -24,6 +24,8 @@ case "$FIRMWARE" in
devolo,magic-2-wifi|\
qxwlan,e1700ac-v2-8m|\
qxwlan,e1700ac-v2-16m|\
+ qxwlan,e600gac-v2-8m|\
+ qxwlan,e600gac-v2-16m|\
ubnt,unifiac-lite|\
ubnt,unifiac-lr|\
ubnt,unifiac-mesh|\
diff --git a/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration b/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration
index 0efc2bf9d7..231afd9f57 100644
--- a/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration
+++ b/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration
@@ -24,6 +24,14 @@ qxwlan,e558-v2-16m|\
qxwlan,e558-v2-8m)
migrate_leds ":qss=:sig2"
;;
+qxwlan,e600g-v2-16m|\
+qxwlan,e600g-v2-8m)
+ migrate_leds "blue:wan=blue:wlan"
+ ;;
+qxwlan,e600gac-v2-16m|\
+qxwlan,e600gac-v2-8m)
+ migrate_leds "orange:wan=orange:wlan2g" "green:system=blue:system"
+ ;;
qxwlan,e750a-v4-16m|\
qxwlan,e750a-v4-8m|\
qxwlan,e750g-v8-16m|\
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 1c2c805b2a..dc91e1b6d9 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -1513,6 +1513,50 @@ define Device/qxwlan_e558-v2-8m
endef
TARGET_DEVICES += qxwlan_e558-v2-8m
+define Device/qxwlan_e600g-v2
+ SOC := qca9531
+ DEVICE_VENDOR := Qxwlan
+ DEVICE_MODEL := E600G
+ DEVICE_PACKAGES := kmod-usb2
+ SUPPORTED_DEVICES += e600g-v2
+endef
+
+define Device/qxwlan_e600g-v2-16m
+ $(Device/qxwlan_e600g-v2)
+ DEVICE_VARIANT := v2 (16M)
+ IMAGE_SIZE := 15936k
+endef
+TARGET_DEVICES += qxwlan_e600g-v2-16m
+
+define Device/qxwlan_e600g-v2-8m
+ $(Device/qxwlan_e600g-v2)
+ DEVICE_VARIANT := v2 (8M)
+ IMAGE_SIZE := 7744k
+endef
+TARGET_DEVICES += qxwlan_e600g-v2-8m
+
+define Device/qxwlan_e600gac-v2
+ SOC := qca9531
+ DEVICE_VENDOR := Qxwlan
+ DEVICE_MODEL := E600GAC
+ DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct
+ SUPPORTED_DEVICES += e600gac-v2
+endef
+
+define Device/qxwlan_e600gac-v2-16m
+ $(Device/qxwlan_e600gac-v2)
+ DEVICE_VARIANT := v2 (16M)
+ IMAGE_SIZE := 15936k
+endef
+TARGET_DEVICES += qxwlan_e600gac-v2-16m
+
+define Device/qxwlan_e600gac-v2-8m
+ $(Device/qxwlan_e600gac-v2)
+ DEVICE_VARIANT := v2 (8M)
+ IMAGE_SIZE := 7744k
+endef
+TARGET_DEVICES += qxwlan_e600gac-v2-8m
+
define Device/qxwlan_e750a-v4
SOC := ar9344
DEVICE_VENDOR := Qxwlan
More information about the lede-commits
mailing list