[openwrt/openwrt] ramips: add support for TP-Link RE220 v2
LEDE Commits
lede-commits at lists.infradead.org
Tue Jun 30 11:44:25 EDT 2020
adrian pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/33fae8421e3270869c645fd304523133419d7f5d
commit 33fae8421e3270869c645fd304523133419d7f5d
Author: Rowan Border <rowanjborder at gmail.com>
AuthorDate: Tue Jun 30 14:35:56 2020 +0100
ramips: add support for TP-Link RE220 v2
TP-Link RE220 v2 is a wireless range extender with Ethernet and 2.4G and 5G
WiFi with internal antennas. It's based on MediaTek MT7628AN+MT7610EN.
This port of OpenWRT leverages work done by Andreas Böhler <dev at aboehler.at>
for the TP-Link RE200 v2 as both devices share the same SoC, flash layout
and GPIO pinout.
Specifications
MediaTek MT7628AN (580 Mhz)
64 MB of RAM
8 MB of FLASH
2T2R 2.4 GHz and 1T1R 5 GHz
1x 10/100 Mbps Ethernet
UART header on PCB (57600 8n1)
8x LED (GPIO-controlled), 2x button
There are 2.4G and 5G LEDs in red and green which are controlled separately.
Web Interface Installation
It is possible to upgrade to OpenWrt via the web interface. Simply flash
the -factory.bin from OEM. In contrast to a stock firmware, this will not
overwrite U-Boot.
Signed-off-by: Rowan Border <rowanjborder at gmail.com>
---
.../linux/ramips/dts/mt7628an_tplink_re220-v2.dts | 70 ++++++++++++++++++++++
target/linux/ramips/image/mt76x8.mk | 10 ++++
.../ramips/mt76x8/base-files/etc/board.d/01_leds | 1 +
.../mt76x8/base-files/etc/board.d/02_network | 1 +
tools/firmware-utils/src/tplink-safeloader.c | 43 +++++++++++++
5 files changed, 125 insertions(+)
diff --git a/target/linux/ramips/dts/mt7628an_tplink_re220-v2.dts b/target/linux/ramips/dts/mt7628an_tplink_re220-v2.dts
new file mode 100644
index 0000000000..6e95f87349
--- /dev/null
+++ b/target/linux/ramips/dts/mt7628an_tplink_re220-v2.dts
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7628an_tplink_re200.dtsi"
+
+/ {
+ compatible = "tplink,re220-v2", "mediatek,mt7628an-soc";
+ model = "TP-Link RE220 v2";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wps {
+ label = "re220-v2:green:wps";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi {
+ label = "re220-v2:green:wifi";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "re220-v2:green:lan";
+ gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power: power {
+ label = "re220-v2:green:power";
+ gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi2g_green {
+ label = "re220-v2:green:wifi2g";
+ gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wifi5g_green {
+ label = "re220-v2:green:wifi5g";
+ gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wifi2g_red {
+ label = "re220-v2:red:wifi2g";
+ gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi5g_red {
+ label = "re220-v2:red:wifi5g";
+ gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "p4led_an", "p3led_an", "p2led_an", "p1led_an",
+ "p0led_an", "wled_an", "i2c", "wdt", "refclk";
+ function = "gpio";
+ };
+};
diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk
index cd5cdd4e8c..310772932b 100644
--- a/target/linux/ramips/image/mt76x8.mk
+++ b/target/linux/ramips/image/mt76x8.mk
@@ -367,6 +367,16 @@ define Device/tplink_re200-v2
endef
TARGET_DEVICES += tplink_re200-v2
+define Device/tplink_re220-v2
+ $(Device/tplink-safeloader)
+ IMAGE_SIZE := 7808k
+ DEVICE_MODEL := RE220
+ DEVICE_VARIANT := v2
+ DEVICE_PACKAGES := kmod-mt76x0e
+ TPLINK_BOARD_ID := RE220-V2
+endef
+TARGET_DEVICES += tplink_re220-v2
+
define Device/tplink_re305-v1
$(Device/tplink-safeloader)
IMAGE_SIZE := 6016k
diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
index 9db39cbdde..fcc6516c8d 100755
--- a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
@@ -68,6 +68,7 @@ tplink,archer-c50-v4)
ucidef_set_led_wlan "wlan5g" "wlan5g" "$boardname:green:wlan5g" "phy1tpt"
;;
tplink,re200-v2|\
+tplink,re220-v2|\
tplink,tl-mr3020-v3|\
tplink,tl-wa801nd-v5)
ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0"
diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
index a06e47a54b..ecba0ccb17 100755
--- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
@@ -17,6 +17,7 @@ ramips_setup_interfaces()
ravpower,rp-wd009|\
tama,w06|\
tplink,re200-v2|\
+ tplink,re220-v2|\
tplink,re305-v1|\
tplink,tl-mr3020-v3|\
tplink,tl-wr802n-v4|\
diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c
index f2e4a7ce9a..a97f329a87 100644
--- a/tools/firmware-utils/src/tplink-safeloader.c
+++ b/tools/firmware-utils/src/tplink-safeloader.c
@@ -1555,6 +1555,49 @@ static struct device_info boards[] = {
.last_sysupgrade_partition = "file-system"
},
+ /** Firmware layout for the RE220 v2 */
+ {
+ .id = "RE220-V2",
+ .vendor = "",
+ .support_list =
+ "SupportList:\n"
+ "{product_name:RE220,product_ver:2.0.0,special_id:00000000}\n"
+ "{product_name:RE220,product_ver:2.0.0,special_id:41520000}\n"
+ "{product_name:RE220,product_ver:2.0.0,special_id:41550000}\n"
+ "{product_name:RE220,product_ver:2.0.0,special_id:42520000}\n"
+ "{product_name:RE220,product_ver:2.0.0,special_id:43410000}\n"
+ "{product_name:RE220,product_ver:2.0.0,special_id:45530000}\n"
+ "{product_name:RE220,product_ver:2.0.0,special_id:45550000}\n"
+ "{product_name:RE220,product_ver:2.0.0,special_id:49440000}\n"
+ "{product_name:RE220,product_ver:2.0.0,special_id:4a500000}\n"
+ "{product_name:RE220,product_ver:2.0.0,special_id:4b520000}\n"
+ "{product_name:RE220,product_ver:2.0.0,special_id:52550000}\n"
+ "{product_name:RE220,product_ver:2.0.0,special_id:54570000}\n"
+ "{product_name:RE220,product_ver:2.0.0,special_id:55530000}\n",
+ .support_trail = '\x00',
+ .soft_ver = NULL,
+
+ .partitions = {
+ {"fs-uboot", 0x00000, 0x20000},
+ {"firmware", 0x20000, 0x7a0000},
+ {"partition-table", 0x7c0000, 0x02000},
+ {"default-mac", 0x7c2000, 0x00020},
+ {"pin", 0x7c2100, 0x00020},
+ {"product-info", 0x7c3100, 0x01000},
+ {"soft-version", 0x7c4200, 0x01000},
+ {"support-list", 0x7c5200, 0x01000},
+ {"profile", 0x7c6200, 0x08000},
+ {"config-info", 0x7ce200, 0x00400},
+ {"user-config", 0x7d0000, 0x10000},
+ {"default-config", 0x7e0000, 0x10000},
+ {"radio", 0x7f0000, 0x10000},
+ {NULL, 0, 0}
+ },
+
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "file-system"
+ },
+
/** Firmware layout for the RE305 v1 */
{
.id = "RE305-V1",
More information about the lede-commits
mailing list