[openwrt/openwrt] kernel: i2c-pxa: remove slave

[LEDE Commits]

hauke pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/dd13add3ceed9056b0b3cce182241ba553ed07cb

commit dd13add3ceed9056b0b3cce182241ba553ed07cb
Author: Scott Roberts <ttocsr at gmail.com>
AuthorDate: Wed May 20 13:28:39 2020 -0600

    kernel: i2c-pxa: remove slave
    
    Removing i2c pxa slave
    
    The i2c-pxa is typically not use in slave mode. It does not make sense
    to have slave mode enabled by default.
    Having slave mode enabled prevents the i2c controller from being reset
    if a real slave device such as an SFP is attached to the i2c-pxa bus and
    locks it up.
    Disable slave mode so that the i2c controller can be reset if the bus is
    locked up.
    If someone actually has a need for pxa slave mode this can be enabled in
    kernel config.
    
    Signed-off-by: Scott Roberts <ttocsr at gmail.com>
---
 package/kernel/linux/modules/i2c.mk | 1 -
 1 file changed, 1 deletion(-)

diff --git a/package/kernel/linux/modules/i2c.mk b/package/kernel/linux/modules/i2c.mk
index 6690384a89..ca6463c81b 100644
--- a/package/kernel/linux/modules/i2c.mk
+++ b/package/kernel/linux/modules/i2c.mk
@@ -210,7 +210,6 @@ $(eval $(call KernelPackage,i2c-piix4))
 
 
 I2C_PXA_MODULES:= \
-  CONFIG_I2C_PXA_SLAVE=y \
   CONFIG_I2C_PXA:drivers/i2c/busses/i2c-pxa
 
 define KernelPackage/i2c-pxa