[openwrt/openwrt] lantiq: remove unused PHY drivers on xrx200

[LEDE Commits]

hauke pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/58a6f06978f8c1995fefee01d6c3c6f3c78b36c9

commit 58a6f06978f8c1995fefee01d6c3c6f3c78b36c9
Author: Aleksander Jan Bajkowski <A.Bajkowski at stud.elka.pw.edu.pl>
AuthorDate: Sat May 2 18:26:29 2020 +0200

    lantiq: remove unused PHY drivers on xrx200
    
    All boards on xrx200 use builtin switch and there is no supported device
    with external switch.
    It was copy paste from xway subtarget and was added in commit 18b76c66fbfea0e21ff66c6df432fa109c5bbb43.
    
    Save 20.3 kB flash memory.
    
    Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski at stud.elka.pw.edu.pl>
---
 target/linux/lantiq/xrx200/config-4.19 | 6 ------
 target/linux/lantiq/xrx200/config-5.4  | 6 ------
 2 files changed, 12 deletions(-)

diff --git a/target/linux/lantiq/xrx200/config-4.19 b/target/linux/lantiq/xrx200/config-4.19
index 0c14f3dadc..c9451ec363 100644
--- a/target/linux/lantiq/xrx200/config-4.19
+++ b/target/linux/lantiq/xrx200/config-4.19
@@ -1,5 +1,3 @@
-CONFIG_ADM6996_PHY=y
-CONFIG_AR8216_PHY=y
 CONFIG_AT803X_PHY=y
 CONFIG_BLK_MQ_PCI=y
 CONFIG_CPU_MIPSR2_IRQ_EI=y
@@ -69,10 +67,6 @@ CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_RFS_ACCEL=y
 CONFIG_RPS=y
-CONFIG_RTL8306_PHY=y
-CONFIG_RTL8366S_PHY=y
-CONFIG_RTL8367B_PHY=y
-CONFIG_RTL8367_PHY=y
 CONFIG_SENSORS_LTQ_CPUTEMP=y
 CONFIG_SGL_ALLOC=y
 CONFIG_SMP=y
diff --git a/target/linux/lantiq/xrx200/config-5.4 b/target/linux/lantiq/xrx200/config-5.4
index cad6ebf1ae..b3749b927a 100644
--- a/target/linux/lantiq/xrx200/config-5.4
+++ b/target/linux/lantiq/xrx200/config-5.4
@@ -1,5 +1,3 @@
-CONFIG_ADM6996_PHY=y
-CONFIG_AR8216_PHY=y
 CONFIG_AT803X_PHY=y
 CONFIG_BLK_MQ_PCI=y
 CONFIG_CPU_MIPSR2_IRQ_EI=y
@@ -74,10 +72,6 @@ CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_RFS_ACCEL=y
 CONFIG_RPS=y
-CONFIG_RTL8306_PHY=y
-CONFIG_RTL8366S_PHY=y
-CONFIG_RTL8367B_PHY=y
-CONFIG_RTL8367_PHY=y
 CONFIG_SENSORS_LTQ_CPUTEMP=y
 CONFIG_SGL_ALLOC=y
 CONFIG_SMP=y