[openwrt/openwrt] uboot-kirkwood: enable sata in nsa310 uboot

[LEDE Commits]

hauke pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/930f3c014821df423507c878415c7fb4910a454d

commit 930f3c014821df423507c878415c7fb4910a454d
Author: Alberto Bursi <bobafetthotmail at gmail.com>
AuthorDate: Fri May 22 18:49:15 2020 +0200

    uboot-kirkwood: enable sata in nsa310 uboot
    
    the uboot of nsa310 cannot use the network chip
    as it is a realtek on the PCIe lanes and not a
    Marvell ethernet from the SoC.
    
    Therefore tftp is not possible on this device
    and the only way to install is by loading files
    from a USB drive.
    If the USB subsystem is dead there is no way to
    install OpenWrt.
    Enable sata support and commands so it can be
    used as a fallback in case of USB issues.
    
    Signed-off-by: Alberto Bursi <bobafetthotmail at gmail.com>
---
 package/boot/uboot-kirkwood/patches/007-nsa310-uboot-generic.patch | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/package/boot/uboot-kirkwood/patches/007-nsa310-uboot-generic.patch b/package/boot/uboot-kirkwood/patches/007-nsa310-uboot-generic.patch
index 09dc587bf7..eea561fab8 100644
--- a/package/boot/uboot-kirkwood/patches/007-nsa310-uboot-generic.patch
+++ b/package/boot/uboot-kirkwood/patches/007-nsa310-uboot-generic.patch
@@ -505,7 +505,7 @@ NOTE: this patch is ready for upstream, LEDE-specific parts are in
 +#endif /* __NSA310_H */
 --- /dev/null
 +++ b/configs/nsa310_defconfig
-@@ -0,0 +1,48 @@
+@@ -0,0 +1,50 @@
 +CONFIG_ARM=y
 +CONFIG_SYS_DCACHE_OFF=y
 +CONFIG_ARCH_CPU_INIT=y
@@ -554,6 +554,8 @@ NOTE: this patch is ready for upstream, LEDE-specific parts are in
 +CONFIG_LZMA=y
 +CONFIG_LZO=y
 +CONFIG_SYS_LONGHELP=y
++CONFIG_SATA_MV=y
++CONFIG_CMD_IDE=y
 --- /dev/null
 +++ b/include/configs/nsa310.h
 @@ -0,0 +1,103 @@