[openwrt/openwrt] ramips: don't create switch config for VIXMINI

[LEDE Commits]

blocktrron pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/612d5282b5107635e015dbbc40924509bea209fc

commit 612d5282b5107635e015dbbc40924509bea209fc
Author: David Bauer <mail at david-bauer.net>
AuthorDate: Sat Jul 18 22:12:19 2020 +0200

    ramips: don't create switch config for VIXMINI
    
    Don't create UCI switch config for the GL.iNet microuter-N300 and
    VIXMINI. These devices only have a single LAN port.
    Creating the switch config makes usage of VLANs more complicated,
    as they would have to be configured on the MAC as well as the "switch".
    
    Signed-off-by: David Bauer <mail at david-bauer.net>
---
 target/linux/ramips/mt76x8/base-files/etc/board.d/02_network | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
index e3d18b5fba..0809109c13 100755
--- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
@@ -11,6 +11,8 @@ ramips_setup_interfaces()
 	case $board in
 	alfa-network,awusfree1|\
 	d-team,pbr-d1|\
+	glinet,microuter-n300|\
+	glinet,vixmini|\
 	mediatek,linkit-smart-7688|\
 	onion,omega2p|\
 	onion,omega2|\
@@ -57,11 +59,6 @@ ramips_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"1:lan" "0:wan" "6 at eth0"
 		;;
-	glinet,microuter-n300|\
-	glinet,vixmini)
-		ucidef_add_switch "switch0" \
-			"0:lan" "6 at eth0"
-		;;
 	hilink,hlk-7628n|\
 	hiwifi,hc5861b|\
 	skylab,skw92a|\