[openwrt/openwrt] ipq806x: enable Linksys EA8500 eth1 interface

[LEDE Commits]

ynezz pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/f93267bccff672e59ec0d0cf262e6574b00cc3e0

commit f93267bccff672e59ec0d0cf262e6574b00cc3e0
Author: Pawel Dembicki <paweldembicki at gmail.com>
AuthorDate: Tue Jun 30 11:29:46 2020 +0200

    ipq806x: enable Linksys EA8500 eth1 interface
    
    At this moment Linksys EA8500 uses only eth0.
    
    This patch change switch registers, which allow to use eth1 as lan
    and eth0 as wan. The method work with similar Linksys EA7500V1
    and it work with EA8500.
    
    Suggested-by: Sungbo Eo <mans0n at gorani.run>
    Tested-by: Brian Onn <brian.a.onn at gmail.com>
    Tested-by: Adrian Panella <ianchi74 at outlook.com>
    Signed-off-by: Pawel Dembicki <paweldembicki at gmail.com>
---
 target/linux/ipq806x/base-files/etc/board.d/02_network                  | 2 +-
 .../linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts  | 1 +
 .../linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts   | 1 +
 3 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network
index 65946d7ac5..529a8d9f39 100755
--- a/target/linux/ipq806x/base-files/etc/board.d/02_network
+++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
@@ -37,7 +37,7 @@ linksys,ea7500-v1)
 linksys,ea8500)
 	hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
 	ucidef_add_switch "switch0" \
-		"0 at eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
+		"1:lan" "2:lan" "3:lan" "4:lan" "6 at eth1" "5:wan" "0 at eth0"
 	ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
 	ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
 	;;
diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
index b052ca6fcb..fc4d64453f 100644
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
@@ -292,6 +292,7 @@
 					0x00004 0x7600000   /* PAD0_MODE */
 					0x00008 0x1000000   /* PAD5_MODE */
 					0x0000c 0x80        /* PAD6_MODE */
+					0x00010 0x2613a0    /* PWS_REG */
 					0x000e4 0x6a545     /* MAC_POWER_SEL */
 					0x000e0 0xc74164de  /* SGMII_CTRL */
 					0x0007c 0x4e        /* PORT0_STATUS */
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
index 0e4563a961..7110f8943a 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
@@ -279,6 +279,7 @@
 			0x00004 0x7600000   /* PAD0_MODE */
 			0x00008 0x1000000   /* PAD5_MODE */
 			0x0000c 0x80        /* PAD6_MODE */
+			0x00010 0x2613a0    /* PWS_REG */
 			0x000e4 0x6a545     /* MAC_POWER_SEL */
 			0x000e0 0xc74164de  /* SGMII_CTRL */
 			0x0007c 0x4e        /* PORT0_STATUS */