[openwrt/openwrt] ramips: add support for ZyXEL Keenetic Lite Rev.B

LEDE Commits lede-commits at lists.infradead.org
Wed Jul 8 16:55:16 EDT 2020


ynezz pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/4dc9ad4af8c921494d20b303b6772fc6b5af3a69

commit 4dc9ad4af8c921494d20b303b6772fc6b5af3a69
Author: Sergei Burakov <senior.anonymous at ya.ru>
AuthorDate: Thu May 28 21:24:55 2020 +0300

    ramips: add support for ZyXEL Keenetic Lite Rev.B
    
    Device specification:
    
    SoC: RT5350
    CPU Frequency: 360 MHz
    Flash Chip: Macronix MX25L6406E (8192 KiB)
    RAM: Winbond W9825G6JH-6 (32768 KiB)
    5x 10/100 Mbps Ethernet (4x LAN, 1x WAN)
    1x external antenna
    UART (J1) header on PCB (57800 8n1)
    Wireless: SoC-intergated: 2.4GHz 802.11bgn
    USB: None
    8x LED, 2x button
    
    Flash instruction:
    
    Configure PC with static IP 192.168.99.8/24 and start TFTP server.
    Rename "openwrt-ramips-rt305x-zyxel_keenetic-lite-b-squashfs-sysupgrade.bin"
    to "rt305x_firmware.bin" and place it in TFTP server directory.
    Connect PC with one of LAN ports, press the reset button, power up
    the router and keep button pressed until power LED start blinking.
    Router will download file from TFTP server, write it to flash and reboot.
    
    Signed-off-by: Sergei Burakov <senior.anonymous at ya.ru>
---
 .../ramips/dts/rt5350_zyxel_keenetic-lite-b.dts    | 110 +++++++++++++++++++++
 target/linux/ramips/image/rt305x.mk                |   9 ++
 .../rt305x/base-files/etc/board.d/02_network       |   1 +
 3 files changed, 120 insertions(+)

diff --git a/target/linux/ramips/dts/rt5350_zyxel_keenetic-lite-b.dts b/target/linux/ramips/dts/rt5350_zyxel_keenetic-lite-b.dts
new file mode 100644
index 0000000000..74c7fa920f
--- /dev/null
+++ b/target/linux/ramips/dts/rt5350_zyxel_keenetic-lite-b.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/dts-v1/;
+
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "zyxel,keenetic-lite-b", "ralink,rt5350-soc";
+	model = "ZyXEL Keenetic Lite Rev.B";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			label = "keenetic-lite-b:green:power";
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "keenetic-lite-b:green:wps";
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash at 0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <60000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition at 0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition at 30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			factory: partition at 40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+			};
+
+			partition at 50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x7b0000>;
+			};
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "uartf";
+		function = "gpio";
+	};
+};
+
+&ethernet {
+	mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+	mediatek,portmap = <0x2f>;
+	mediatek,led_polarity = <0x17>;
+};
+
+&wmac {
+	ralink,led-polarity = <1>;
+	ralink,mtd-eeprom = <&factory 0x0>;
+};
diff --git a/target/linux/ramips/image/rt305x.mk b/target/linux/ramips/image/rt305x.mk
index 3171646b8a..b75d9078e5 100644
--- a/target/linux/ramips/image/rt305x.mk
+++ b/target/linux/ramips/image/rt305x.mk
@@ -1193,6 +1193,15 @@ define Device/zyxel_keenetic
 endef
 TARGET_DEVICES += zyxel_keenetic
 
+define Device/zyxel_keenetic-lite-b
+  SOC := rt5350
+  IMAGE_SIZE := 7872k
+  DEVICE_VENDOR := ZyXEL
+  DEVICE_MODEL := Keenetic Lite
+  DEVICE_VARIANT := B
+endef
+TARGET_DEVICES += zyxel_keenetic-lite-b
+
 define Device/zyxel_keenetic-start
   SOC := rt5350
   IMAGE_SIZE := 3776k
diff --git a/target/linux/ramips/rt305x/base-files/etc/board.d/02_network b/target/linux/ramips/rt305x/base-files/etc/board.d/02_network
index f34ade8f68..56c786bc95 100755
--- a/target/linux/ramips/rt305x/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/rt305x/base-files/etc/board.d/02_network
@@ -164,6 +164,7 @@ ramips_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0:lan" "1:lan" "2:wan" "6 at eth0"
 		;;
+	zyxel,keenetic-lite-b|\
 	zyxel,keenetic-start)
 		ucidef_add_switch "switch0" \
 			"0:lan:3" "1:lan:2" "2:lan:1" "3:lan:0" "4:wan" "6 at eth0"



More information about the lede-commits mailing list