[openwrt/openwrt] ramips: use WiFi LED DT triggers for TP-Link RE650 v1

[LEDE Commits]

adrian pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/7cb721c03fdc163818f8114692229d0097d2f26b

commit 7cb721c03fdc163818f8114692229d0097d2f26b
Author: Adrian Schmutzler <freifunk at adrianschmutzler.de>
AuthorDate: Tue Jul 7 11:49:36 2020 +0200

    ramips: use WiFi LED DT triggers for TP-Link RE650 v1
    
    This moves WiFi LED triggers from 01_leds to device tree.
    
    While at it, convert the labels there to lower case; this is
    more commonly used and the change will actually remove competition
    between DT trigger and leftover uci config on already installed
    systems.
    
    Suggested-by: Georgi Vlaev <georgi.vlaev at gmail.com>
    Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
---
 target/linux/ramips/dts/mt7621_tplink_re650-v1.dts        | 6 ++++--
 target/linux/ramips/mt7621/base-files/etc/board.d/01_leds | 6 +++---
 2 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/target/linux/ramips/dts/mt7621_tplink_re650-v1.dts b/target/linux/ramips/dts/mt7621_tplink_re650-v1.dts
index ab8805f163..b7290635b9 100644
--- a/target/linux/ramips/dts/mt7621_tplink_re650-v1.dts
+++ b/target/linux/ramips/dts/mt7621_tplink_re650-v1.dts
@@ -23,13 +23,15 @@
 		};
 
 		wifi2g {
-			label = "re650-v1:blue:wifi2G";
+			label = "re650-v1:blue:wifi2g";
 			gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
 		};
 
 		wifi5g {
-			label = "re650-v1:blue:wifi5G";
+			label = "re650-v1:blue:wifi5g";
 			gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
 		};
 
 		wps_red {
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
index 2e3dca7901..37ebd0fb64 100755
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
@@ -68,14 +68,14 @@ netgear,r6800)
 	ucidef_set_led_netdev "lan3" "LAN3" "$boardname:white:lan3" "lan3"
 	ucidef_set_led_netdev "lan4" "LAN4" "$boardname:white:lan4" "lan4"
 	;;
-tplink,re350-v1|\
-tplink,re650-v1)
+tplink,re350-v1)
 	ucidef_set_led_netdev "wifi2g" "Wifi 2.4G" "$boardname:blue:wifi2G" "wlan0"
 	ucidef_set_led_netdev "wifi5g" "Wifi 5G" "$boardname:blue:wifi5G" "wlan1"
 	ucidef_set_led_netdev "eth_act" "LAN act" "$boardname:green:eth_act" "lan" "tx rx"
 	ucidef_set_led_netdev "eth_link" "LAN link" "$boardname:green:eth_link" "lan" "link"
 	;;
-tplink,re500-v1)
+tplink,re500-v1|\
+tplink,re650-v1)
 	ucidef_set_led_netdev "eth_act" "LAN act" "$boardname:green:eth_act" "lan" "tx rx"
 	ucidef_set_led_netdev "eth_link" "LAN link" "$boardname:green:eth_link" "lan" "link"
 	;;