[openwrt/openwrt] ramips: add support for ELECOM WRC-1167GS2-B

LEDE Commits lede-commits at lists.infradead.org
Tue Dec 22 15:45:18 EST 2020


adrian pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/a04d733e561f0c44020c89121d43c91f0621442b

commit a04d733e561f0c44020c89121d43c91f0621442b
Author: INAGAKI Hiroshi <musashino.open at gmail.com>
AuthorDate: Sat Nov 28 18:41:12 2020 +0900

    ramips: add support for ELECOM WRC-1167GS2-B
    
    ELECOM WRC-1167GS2-B is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based
    on MT7621A.
    
    Specification:
    
    - SoC           : MediaTek MT7621A
    - RAM           : DDR3 128 MiB
    - Flash         : SPI-NOR 16 MiB
    - WLAN          : 2.4/5 GHz 2T2R (MediaTek MT7615D)
    - Ethernet      : 10/100/1000 Mbps x5
      - Switch      : MediaTek MT7530 (SoC)
    - LED/keys      : 6x/6x (2x buttons, 1x slide-switch)
    - UART          : through-hole on PCB
      - J4: 3.3V, GND, TX, RX from ethernet port side
      - 57600n8
    - Power         : 12VDC, 1A
    
    MAC addresses:
    
    LAN     : 04:AB:18:**:**:13 (Factory, 0xFFF4 (hex))
    WAN     : 04:AB:18:**:**:14 (Factory, 0xFFFA (hex))
    2.4 GHz : 04:AB:18:**:**:15 (none)
    5 GHz   : 04:AB:18:**:**:16 (Factory, 0x4 (hex))
    
    Flash instruction using factory image:
    
    1. Boot WRC-1167GS2-B normally
    2. Access to "http://192.168.2.1/" and open firmware update page
       ("ファームウェア更新")
    3. Select the OpenWrt factory image and click apply ("適用") button
    4. Wait ~120 seconds to complete flashing
    
    Notes:
    
    - there is no way to configure the correct MAC address for secondary phy
      (5GHz) on MT7615D
    - Wi-Fi band on primary phy (2.4GHz) cannot be limitted by specifying
      ieee80211-freq-limit
      (fail to register secondary phy due to error)
    - mtd-mac-address in the wifi node is required for using
      mtd-mac-address-increment
    
    Signed-off-by: INAGAKI Hiroshi <musashino.open at gmail.com>
    [rebase onto split DTSI patch]
    Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
---
 .../ramips/dts/mt7621_elecom_wrc-1167gs2-b.dts     | 53 ++++++++++++++++++++++
 .../ramips/dts/mt7621_elecom_wrc-gs-1pci.dtsi      | 30 ++++++++++++
 target/linux/ramips/dts/mt7621_elecom_wrc-gs.dtsi  |  2 +-
 target/linux/ramips/image/mt7621.mk                |  8 ++++
 4 files changed, 92 insertions(+), 1 deletion(-)

diff --git a/target/linux/ramips/dts/mt7621_elecom_wrc-1167gs2-b.dts b/target/linux/ramips/dts/mt7621_elecom_wrc-1167gs2-b.dts
new file mode 100644
index 0000000000..6349fd487e
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_elecom_wrc-1167gs2-b.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621_elecom_wrc-gs-1pci.dtsi"
+
+/ {
+	compatible = "elecom,wrc-1167gs2-b", "mediatek,mt7621-soc";
+	model = "ELECOM WRC-1167GS2-B";
+};
+
+&gmac0 {
+	mtd-mac-address = <&factory 0xfff4>;
+};
+
+&wan {
+	mtd-mac-address = <&factory 0xfffa>;
+};
+
+&partitions {
+	partition at 50000 {
+		compatible = "denx,uimage";
+		label = "firmware";
+		reg = <0x50000 0xb00000>;
+	};
+
+	partition at b50000 {
+		label = "tm_pattern";
+		reg = <0xb50000 0x380000>;
+		read-only;
+	};
+
+	partition at ed0000 {
+		label = "tm_key";
+		reg = <0xed0000 0x80000>;
+		read-only;
+	};
+
+	partition at f50000 {
+		label = "nvram";
+		reg = <0xf50000 0x30000>;
+		read-only;
+	};
+
+	partition at f80000 {
+		label = "user_data";
+		reg = <0xf80000 0x80000>;
+		read-only;
+	};
+};
+
+&wifi {
+	mtd-mac-address = <&factory 0x4>;
+	mtd-mac-address-increment = <(-1)>;
+};
diff --git a/target/linux/ramips/dts/mt7621_elecom_wrc-gs-1pci.dtsi b/target/linux/ramips/dts/mt7621_elecom_wrc-gs-1pci.dtsi
new file mode 100644
index 0000000000..7495453d45
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_elecom_wrc-gs-1pci.dtsi
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "mt7621_elecom_wrc-gs.dtsi"
+
+&leds {
+	wlan2g {
+		label = "white:wlan2g";
+		gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+	};
+
+	wlan5g {
+		label = "white:wlan5g";
+		gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "uart3", "jtag", "wdt", "sdhci";
+		function = "gpio";
+	};
+};
+
+&pcie0 {
+	wifi: wifi at 0,0 {
+		compatible = "mediatek,mt76";
+		reg = <0x0000 0 0 0 0>;
+		mediatek,mtd-eeprom = <&factory 0x0>;
+	};
+};
diff --git a/target/linux/ramips/dts/mt7621_elecom_wrc-gs.dtsi b/target/linux/ramips/dts/mt7621_elecom_wrc-gs.dtsi
index 790c5fed70..9cf2b666b4 100644
--- a/target/linux/ramips/dts/mt7621_elecom_wrc-gs.dtsi
+++ b/target/linux/ramips/dts/mt7621_elecom_wrc-gs.dtsi
@@ -14,7 +14,7 @@
 		label-mac-device = &wan;
 	};
 
-	leds {
+	leds: leds {
 		compatible = "gpio-leds";
 
 		led_power_green: power_green {
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index cf81a862ff..7b61529584 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -426,6 +426,14 @@ define Device/elecom_wrc-gs
   DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
 endef
 
+define Device/elecom_wrc-1167gs2-b
+  $(Device/elecom_wrc-gs)
+  IMAGE_SIZE := 11264k
+  DEVICE_MODEL := WRC-1167GS2-B
+  ELECOM_HWNAME := WRC-1167GS2
+endef
+TARGET_DEVICES += elecom_wrc-1167gs2-b
+
 define Device/elecom_wrc-1750gs
   $(Device/elecom_wrc-gs)
   IMAGE_SIZE := 11264k



More information about the lede-commits mailing list