[openwrt/openwrt] ath79: add support for D-Link DAP-2660 A1
LEDE Commits
lede-commits at lists.infradead.org
Tue Dec 22 13:13:52 EST 2020
ynezz pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/8ec997d0063bbc1ac41d1025f4c94ae6337899fa
commit 8ec997d0063bbc1ac41d1025f4c94ae6337899fa
Author: Sebastian Schaper <openwrt at sebastianschaper.net>
AuthorDate: Tue Sep 29 20:02:17 2020 +0200
ath79: add support for D-Link DAP-2660 A1
Specifications:
* QCA9557, 16 MiB Flash, 128 MiB RAM, 802.11n 2T2R
* QCA9882, 802.11ac 2T2R
* Gigabit LAN Port (AR8035), 802.11af PoE
Installation:
* Factory Web UI is at 192.168.0.50
login with 'admin' and blank password, flash factory.bin
* Recovery Web UI is at 192.168.0.50
connect network cable, hold reset button during power-on and keep it
pressed until uploading has started (only required when checksum is ok,
e.g. for reverting back to oem firmware), flash factory.bin
After flashing factory.bin, additional free space can be reclaimed by
flashing sysupgrade.bin, since the factory image requires some padding
to be accepted for upgrading via OEM Web UI.
Signed-off-by: Sebastian Schaper <openwrt at sebastianschaper.net>
---
.../linux/ath79/dts/qca9557_dlink_dap-2660-a1.dts | 89 ++++++++++++++++++++++
target/linux/ath79/dts/qca95xx_dlink_dap-2xxx.dtsi | 54 +++++++++++++
.../generic/base-files/etc/board.d/02_network | 4 +
.../etc/hotplug.d/firmware/11-ath10k-caldata | 1 +
.../etc/hotplug.d/ieee80211/10_fix_wifi_mac | 4 +
.../base-files/etc/uci-defaults/09_fix-checksum | 1 +
target/linux/ath79/image/generic.mk | 22 ++++++
7 files changed, 175 insertions(+)
diff --git a/target/linux/ath79/dts/qca9557_dlink_dap-2660-a1.dts b/target/linux/ath79/dts/qca9557_dlink_dap-2660-a1.dts
new file mode 100644
index 0000000000..1a2974a688
--- /dev/null
+++ b/target/linux/ath79/dts/qca9557_dlink_dap-2660-a1.dts
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+#include "qca95xx_dlink_dap-2xxx.dtsi"
+
+/ {
+ compatible = "dlink,dap-2660-a1", "qca,qca9557";
+ model = "D-Link DAP-2660 A1";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_red;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_red: power_red {
+ label = "red:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+};
+
+&partitions {
+ partition at 70000 {
+ label = "firmware";
+ reg = <0x70000 0xee0000>;
+ compatible = "wrg";
+ };
+
+ partition at f50000 {
+ label = "dlink";
+ reg = <0xf50000 0xa0000>;
+ read-only;
+ };
+
+ art: partition at ff0000 {
+ label = "art";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy at 4 {
+ reg = <0x4>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x82000000 0x80000101 0x80001313>;
+
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+
+ gmac-config {
+ device = <&gmac>;
+ rgmii-enabled = <1>;
+ rxd-delay = <3>;
+ rxdv-delay = <3>;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/qca95xx_dlink_dap-2xxx.dtsi b/target/linux/ath79/dts/qca95xx_dlink_dap-2xxx.dtsi
new file mode 100644
index 0000000000..82d50b85e8
--- /dev/null
+++ b/target/linux/ath79/dts/qca95xx_dlink_dap-2xxx.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+&spi {
+ status = "okay";
+
+ flash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition at 40000 {
+ label = "bdcfg";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition at 50000 {
+ label = "rgdb";
+ reg = <0x50000 0x10000>;
+ read-only;
+ };
+
+ partition at 60000 {
+ label = "unused";
+ reg = <0x60000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 103da30379..3ea0815ff2 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -476,6 +476,10 @@ ath79_setup_macs()
lan_mac=$(mtd_get_mac_text "mp" 0x1)
label_mac=$lan_mac
;;
+ dlink,dap-2660-a1)
+ lan_mac=$(mtd_get_mac_ascii bdcfg "lanmac")
+ label_mac=$lan_mac
+ ;;
dlink,dap-2695-a1)
label_mac=$(mtd_get_mac_ascii bdcfg "wlanmac")
;;
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 23cd4497ba..e492c5f542 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -52,6 +52,7 @@ case "$FIRMWARE" in
caldata_extract "art" 0x5000 0x844
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) -1)
;;
+ dlink,dap-2660-a1|\
dlink,dap-2695-a1)
caldata_extract "art" 0x5000 0x844
ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index b592da00e3..f382e255f1 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -22,6 +22,10 @@ case "$board" in
dlink,dch-g020-a1)
mtd_get_mac_text "mp" 0x13 > /sys${DEVPATH}/macaddress
;;
+ dlink,dap-2660-a1)
+ [ "$PHYNBR" -eq 1 ] && \
+ mtd_get_mac_ascii bdcfg "wlanmac" > /sys${DEVPATH}/macaddress
+ ;;
iodata,wn-ac1600dgr)
# There is no eeprom data for 5 GHz wlan in "art" partition
# which would allow to patch the macaddress
diff --git a/target/linux/ath79/generic/base-files/etc/uci-defaults/09_fix-checksum b/target/linux/ath79/generic/base-files/etc/uci-defaults/09_fix-checksum
index 74c608b96d..9a2cca79a1 100644
--- a/target/linux/ath79/generic/base-files/etc/uci-defaults/09_fix-checksum
+++ b/target/linux/ath79/generic/base-files/etc/uci-defaults/09_fix-checksum
@@ -13,6 +13,7 @@ fixwrgg() {
board=$(board_name)
case "$board" in
+dlink,dap-2660-a1|\
dlink,dap-2695-a1)
fixwrgg
;;
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 037d572d97..e1b0c4c1e1 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -738,6 +738,28 @@ define Device/dlink_dap-1365-a1
endef
TARGET_DEVICES += dlink_dap-1365-a1
+define Device/dlink_dap-2xxx
+ IMAGES += factory.img sysupgrade.bin
+ IMAGE/factory.img := append-kernel | pad-offset 6144k 160 | \
+ append-rootfs | wrgg-pad-rootfs | mkwrggimg | check-size
+ IMAGE/sysupgrade.bin := append-kernel | mkwrggimg | \
+ pad-to $$$$(BLOCKSIZE) | append-rootfs | append-metadata | check-size
+ KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma
+ KERNEL_INITRAMFS := $$(KERNEL) | mkwrggimg
+endef
+
+define Device/dlink_dap-2660-a1
+ $(Device/dlink_dap-2xxx)
+ SOC := qca9557
+ DEVICE_VENDOR := D-Link
+ DEVICE_MODEL := DAP-2660
+ DEVICE_VARIANT := A1
+ DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
+ IMAGE_SIZE := 15232k
+ DAP_SIGNATURE := wapac09_dkbs_dap2660
+endef
+TARGET_DEVICES += dlink_dap-2660-a1
+
define Device/dlink_dap-2695-a1
SOC := qca9558
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
More information about the lede-commits
mailing list