[openwrt/openwrt] ath79: create common DTSI for ECB1200 and ECB1750
LEDE Commits
lede-commits at lists.infradead.org
Tue Dec 22 13:13:38 EST 2020
ynezz pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/3381392557fe5cd1dd00d6f63dc5aa7e37333021
commit 3381392557fe5cd1dd00d6f63dc5aa7e37333021
Author: Michael Pratt <mcpratt at pm.me>
AuthorDate: Thu Nov 26 18:57:31 2020 -0500
ath79: create common DTSI for ECB1200 and ECB1750
These boards are sister boards
exactly the same hardware except that ECB1200 has:
- QCA9557
- 2 RF circuits/antennas per band instead of 3
- a resistor blocking UART RX line
Tested-by: sven friedmann <sf.openwrt at okay.ms>
Signed-off-by: Michael Pratt <mcpratt at pm.me>
---
.../linux/ath79/dts/qca9557_engenius_ecb1200.dts | 134 +--------------------
.../linux/ath79/dts/qca9558_engenius_ecb1750.dts | 133 +-------------------
...s_ecb1200.dts => qca955x_engenius_ecb1xxx.dtsi} | 3 -
3 files changed, 2 insertions(+), 268 deletions(-)
diff --git a/target/linux/ath79/dts/qca9557_engenius_ecb1200.dts b/target/linux/ath79/dts/qca9557_engenius_ecb1200.dts
index ee46cd79e7..955f17f0f3 100644
--- a/target/linux/ath79/dts/qca9557_engenius_ecb1200.dts
+++ b/target/linux/ath79/dts/qca9557_engenius_ecb1200.dts
@@ -1,140 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include "qca955x.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "qca955x_engenius_ecb1xxx.dtsi"
/ {
compatible = "engenius,ecb1200", "qca,qca9557";
model = "EnGenius ECB1200";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- debounce-interval = <60>;
- gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "amber:power";
- gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- wifi2g {
- label = "blue:wifi2g";
- gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy1tpt";
- };
-
- wifi5g {
- label = "blue:wifi5g";
- gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy0tpt";
- };
- };
-};
-
-&uart {
- status = "okay";
-};
-
-&spi {
- status = "okay";
-
- flash at 0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <40000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition at 0 {
- label = "u-boot";
- reg = <0x000000 0x040000>;
- read-only;
- };
-
- partition at 40000 {
- label = "u-boot-env";
- reg = <0x040000 0x010000>;
- };
-
- partition at 50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x050000 0xf50000>;
- };
-
- partition at fa0000 {
- label = "userconfig";
- reg = <0xfa0000 0x050000>;
- read-only;
- };
-
- partition at ff0000 {
- label = "art";
- reg = <0xff0000 0x010000>;
- read-only;
- };
- };
- };
-};
-
-&mdio0 {
- status = "okay";
-
- phy5: ethernet-phy at 5 {
- reg = <5>;
- eee-broken-100tx;
- eee-broken-1000t;
- };
-};
-
-ð0 {
- status = "okay";
-
- phy-handle = <&phy5>;
- phy-mode = "rgmii-id";
-
- pll-data = <0x82000000 0x80000101 0x80001313>;
-
- gmac-config {
- device = <&gmac>;
- rgmii-enabled = <1>;
- };
-};
-
-&pcie0 {
- status = "okay";
-
- wifi at 0,0,0 {
- compatible = "qcom,ath10k";
- reg = <0x0 0 0 0 0>;
- qca,no-eeprom;
- };
-};
-
-&wmac {
- status = "okay";
-
- qca,no-eeprom;
};
diff --git a/target/linux/ath79/dts/qca9558_engenius_ecb1750.dts b/target/linux/ath79/dts/qca9558_engenius_ecb1750.dts
index 159ccc1872..4ee4c8ea69 100644
--- a/target/linux/ath79/dts/qca9558_engenius_ecb1750.dts
+++ b/target/linux/ath79/dts/qca9558_engenius_ecb1750.dts
@@ -1,139 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include "qca955x.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "qca955x_engenius_ecb1xxx.dtsi"
/ {
compatible = "engenius,ecb1750", "qca,qca9558";
model = "EnGenius ECB1750";
-
- aliases {
- led-boot = &led_power_orange;
- led-failsafe = &led_power_orange;
- led-running = &led_power_orange;
- led-upgrade = &led_power_orange;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power_orange: power_orange {
- label = "orange:power";
- gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- wlan2g {
- label = "blue:wlan2g";
- gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy1tpt";
- };
-
- wlan5g {
- label = "blue:wlan5g";
- gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy0tpt";
- };
-
- lan {
- label = "blue:lan";
- gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&pcie0 {
- status = "okay";
-};
-
-&uart {
- status = "okay";
-};
-
-&spi {
- status = "okay";
-
- flash at 0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- uboot: partition at 0 {
- label = "u-boot";
- reg = <0x000000 0x040000>;
- read-only;
- };
-
- partition at 40000 {
- label = "u-boot-env";
- reg = <0x040000 0x010000>;
- };
-
- partition at 50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x050000 0xf50000>;
- };
-
- partition at fa0000 {
- label = "userconfig";
- reg = <0xfa0000 0x050000>;
- read-only;
- };
-
- art: partition at ff0000 {
- label = "art";
- reg = <0xff0000 0x010000>;
- read-only;
- };
- };
- };
-};
-
-&wmac {
- status = "okay";
-
- qca,no-eeprom;
-};
-
-&mdio0 {
- status = "okay";
-
- phy5: ethernet-phy at 5 {
- reg = <5>;
- eee-broken-100tx;
- eee-broken-1000t;
- };
-};
-
-ð0 {
- status = "okay";
-
- pll-data = <0x9a000000 0x80000101 0x80001313>;
-
- phy-handle = <&phy5>;
-
- gmac-config {
- device = <&gmac>;
- rgmii-gmac0 = <1>;
- rxd-delay = <3>;
- rxdv-delay = <3>;
- };
};
diff --git a/target/linux/ath79/dts/qca9557_engenius_ecb1200.dts b/target/linux/ath79/dts/qca955x_engenius_ecb1xxx.dtsi
similarity index 96%
copy from target/linux/ath79/dts/qca9557_engenius_ecb1200.dts
copy to target/linux/ath79/dts/qca955x_engenius_ecb1xxx.dtsi
index ee46cd79e7..0051eb2508 100644
--- a/target/linux/ath79/dts/qca9557_engenius_ecb1200.dts
+++ b/target/linux/ath79/dts/qca955x_engenius_ecb1xxx.dtsi
@@ -6,9 +6,6 @@
#include <dt-bindings/input/input.h>
/ {
- compatible = "engenius,ecb1200", "qca,qca9557";
- model = "EnGenius ECB1200";
-
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
More information about the lede-commits
mailing list