[openwrt/openwrt] ramips: enable flashing WizFi630S via OEM firmware
LEDE Commits
lede-commits at lists.infradead.org
Sat Aug 8 10:38:53 EDT 2020
adrian pushed a commit to openwrt/openwrt.git, branch openwrt-19.07:
https://git.openwrt.org/d1985a1be6701c4cd6bb2d81bc42f9e5ed99883a
commit d1985a1be6701c4cd6bb2d81bc42f9e5ed99883a
Author: Tobias Welz <tw at wiznet.eu>
AuthorDate: Mon Aug 3 21:28:31 2020 +0200
ramips: enable flashing WizFi630S via OEM firmware
WIZnet WizFi630s board name is written slightly different it its OEM
OpenWrt firmware. This causes an incompatibility warning during flashing
with sysupgrade. This patch is adding the vendor board name to the
supported devices list to avoid this warning. For initial flashing you
can use sysupgrade via command line or luci beside of TFTP.
Do not keep the OEM configuration during sysupgrade.
Signed-off-by: Tobias Welz <tw at wiznet.eu>
(cherry picked from commit 816973f42aa47d910d3e35c2f8f8eb9d67416396)
---
target/linux/ramips/image/mt76x8.mk | 1 +
1 file changed, 1 insertion(+)
diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk
index 7df5c04297..d0c66a0e23 100644
--- a/target/linux/ramips/image/mt76x8.mk
+++ b/target/linux/ramips/image/mt76x8.mk
@@ -440,6 +440,7 @@ define Device/wiznet_wizfi630s
DTS := WIZFI630S
IMAGE_SIZE := $(ralink_default_fw_size_32M)
DEVICE_TITLE := WIZnet WizFi630S
+ SUPPORTED_DEVICES += wizfi630s
endef
TARGET_DEVICES += wiznet_wizfi630s
More information about the lede-commits
mailing list