[openwrt/openwrt] ar71xx: enable ethernet LED of Arduino Yun

[LEDE Commits]

adrian pushed a commit to openwrt/openwrt.git, branch openwrt-19.07:
https://git.openwrt.org/f6acabcbdc455d2032f5a935ead2fedf781e8ce2

commit f6acabcbdc455d2032f5a935ead2fedf781e8ce2
Author: Sungbo Eo <mans0n at gorani.run>
AuthorDate: Sun Jan 12 21:35:00 2020 +0900

    ar71xx: enable ethernet LED of Arduino Yun
    
    Commit 05d73a2a7379 enabled GPIO on ethernet LED, but proper LED setup was
    not added then. This commit fixes it by reverting the change on the LED.
    
    Fixes: 05d73a2a7379 ("ar71xx: Arduino Yun board 'WLAN RST' button support")
    Signed-off-by: Sungbo Eo <mans0n at gorani.run>
    (cherry picked from commit a5e404d1923d135d335e4ece83f87e6e891396e2)
---
 target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c
index 5873248edf..8ab07d514b 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c
@@ -117,8 +117,7 @@ static void __init ds_setup(void)
 	ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
 								AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
 								AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
-								AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
-								AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+								AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN);
 
 	//Disable the Function for some pins to have GPIO functionality active
 	// GPIO6-7-8 and GPIO11