[openwrt/openwrt] ath79: cleanup image build code
LEDE Commits
lede-commits at lists.infradead.org
Wed May 16 22:47:16 PDT 2018
mkresin pushed a commit to openwrt/openwrt.git, branch master:
https://git.lede-project.org/f77db1a59036d896139e6cddcdb62bf38f2f9ff6
commit f77db1a59036d896139e6cddcdb62bf38f2f9ff6
Author: Mathias Kresin <dev at kresin.me>
AuthorDate: Mon May 7 21:09:44 2018 +0200
ath79: cleanup image build code
Remove recipes for not yet migrated boards. Drop variables which aren't
required due to the switch to devicetree like boardname.
Drop the legacy image build code. Boards added to this target shouldn't
use the legacy image build code anyway.
Signed-off-by: Mathias Kresin <dev at kresin.me>
---
target/linux/ath79/image/Makefile | 15 +-
.../ath79/image/{tp-link.mk => generic-tp-link.mk} | 54 +-
target/linux/ath79/image/generic-ubnt.mk | 202 +---
target/linux/ath79/image/generic.mk | 46 +-
target/linux/ath79/image/legacy.mk | 1058 --------------------
5 files changed, 24 insertions(+), 1351 deletions(-)
diff --git a/target/linux/ath79/image/Makefile b/target/linux/ath79/image/Makefile
index cc71c31..9c789d4 100644
--- a/target/linux/ath79/image/Makefile
+++ b/target/linux/ath79/image/Makefile
@@ -3,14 +3,13 @@ include $(INCLUDE_DIR)/image.mk
KERNEL_LOADADDR = 0x80060000
-DEVICE_VARS += CMDLINE CONSOLE IMAGE_SIZE BOARDNAME LOADER_FLASH_OFFS LOADER_TYPE ATH_SOC
+DEVICE_VARS += IMAGE_SIZE LOADER_FLASH_OFFS LOADER_TYPE ATH_SOC
define Build/loader-common
rm -rf $@.src
$(MAKE) -C lzma-loader \
PKG_BUILD_DIR="$@.src" \
TARGET_DIR="$(dir $@)" LOADER_NAME="$(notdir $@)" \
- BOARD="$(BOARDNAME)" \
LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
$(1) compile loader.$(LOADER_TYPE)
mv "$@.$(LOADER_TYPE)" "$@"
@@ -22,12 +21,12 @@ define Build/loader-kernel
endef
define Build/loader-kernel-cmdline
- $(call Build/loader-common,LOADER_DATA="$@" KERNEL_CMDLINE="$(CMDLINE)")
+ $(call Build/loader-common,LOADER_DATA="$@")
endef
define Build/loader-okli-compile
- $(call Build/loader-common,FLASH_OFFS=$(LOADER_FLASH_OFFS) FLASH_MAX=0 KERNEL_CMDLINE="$(CMDLINE)")
+ $(call Build/loader-common,FLASH_OFFS=$(LOADER_FLASH_OFFS) FLASH_MAX=0)
endef
define Build/loader-okli
@@ -55,15 +54,11 @@ endef
define Device/Default
ATH_SOC :=
- BOARDNAME :=
- DEVICE_PROFILE = $$(BOARDNAME)
DEVICE_DTS_DIR := ../dts
DEVICE_DTS = $$(ATH_SOC)_$(1)
- PROFILES = Default Minimal $$(DEVICE_PROFILE)
+ PROFILES = Default
MTDPARTS :=
BLOCKSIZE := 64k
- CONSOLE = ttyS0,115200
- CMDLINE = $$(if $$(BOARDNAME),board=$$(BOARDNAME)) $$(if $$(MTDPARTS),mtdparts=$$(MTDPARTS)) $$(if $$(CONSOLE),console=$$(CONSOLE))
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | uImage lzma
COMPILE :=
@@ -72,8 +67,8 @@ define Device/Default
endef
ifeq ($(SUBTARGET),generic)
-include ./tp-link.mk
include ./generic.mk
+include ./generic-tp-link.mk
include ./generic-ubnt.mk
endif
$(eval $(call BuildImage))
diff --git a/target/linux/ath79/image/tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk
similarity index 58%
rename from target/linux/ath79/image/tp-link.mk
rename to target/linux/ath79/image/generic-tp-link.mk
index bbe4054..c7d4430 100644
--- a/target/linux/ath79/image/tp-link.mk
+++ b/target/linux/ath79/image/generic-tp-link.mk
@@ -35,85 +35,41 @@ define Build/mktplinkfw-combined
@mv $@.new $@
endef
-# add RE450 and similar header to the kernel image
-define Build/mktplinkfw-kernel
- $(STAGING_DIR_HOST)/bin/mktplinkfw-kernel \
- -H $(TPLINK_HWID) -N OpenWrt -V $(REVISION) \
- -L $(KERNEL_LOADADDR) -E $(KERNEL_LOADADDR) \
- -k $@ \
- -o $@.new
- @mv $@.new $@
-endef
-
-define Build/uImageArcher
- mkimage -A $(LINUX_KARCH) \
- -O linux -T kernel \
- -C $(1) -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
- -n '$(call toupper,$(LINUX_KARCH)) LEDE Linux-$(LINUX_VERSION)' -d $@ $@.new
- @mv $@.new $@
-endef
-
define Device/tplink
TPLINK_HWREV := 0x1
TPLINK_HEADER_VERSION := 1
LOADER_TYPE := gz
- KERNEL := kernel-bin | patch-cmdline | lzma
- KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | mktplinkfw-combined
-# IMAGES := sysupgrade.bin
- IMAGES := sysupgrade.bin factory.bin
+ IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade
-# IMAGE/factory.bin := append-rootfs | mktplinkfw factory | a
endef
define Device/tplink-nolzma
-$(Device/tplink)
+ $(Device/tplink)
LOADER_FLASH_OFFS := 0x22000
COMPILE := loader-$(1).gz
COMPILE/loader-$(1).gz := loader-okli-compile
- #KERNEL := copy-file $(KDIR)/vmlinux.bin.lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1)
- KERNEL:= kernel-bin | append-dtb | lzma |uImage lzma -M 0x4f4b4c49 | loader-okli $(1)
+ KERNEL:= kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1)
KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux-initramfs.bin.lzma | loader-kernel-cmdline | mktplinkfw-combined
endef
define Device/tplink-4m
-$(Device/tplink-nolzma)
+ $(Device/tplink-nolzma)
TPLINK_FLASHLAYOUT := 4M
IMAGE_SIZE := 3904k
endef
define Device/tplink-8m
-$(Device/tplink-nolzma)
+ $(Device/tplink-nolzma)
TPLINK_FLASHLAYOUT := 8M
IMAGE_SIZE := 7936k
endef
-define Device/tplink-4mlzma
-$(Device/tplink)
- TPLINK_FLASHLAYOUT := 4Mlzma
- IMAGE_SIZE := 3904k
-endef
-
-define Device/tplink-8mlzma
-$(Device/tplink)
- TPLINK_FLASHLAYOUT := 8Mlzma
- IMAGE_SIZE := 7936k
-endef
-
-define Device/tplink-16mlzma
-$(Device/tplink)
- TPLINK_FLASHLAYOUT := 16Mlzma
- IMAGE_SIZE := 15872k
-endef
-
define Device/tl_wr1043nd_v1
$(Device/tplink-8m)
ATH_SOC := ar9132
DEVICE_TITLE := TP-LINK TL-WR1043N/ND v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
- BOARDNAME := TL-WR1043ND
- DEVICE_PROFILE := TLWR1043
TPLINK_HWID := 0x10430001
endef
-
#TARGET_DEVICES += tl_wr1043nd_v1
diff --git a/target/linux/ath79/image/generic-ubnt.mk b/target/linux/ath79/image/generic-ubnt.mk
index b614152..d1ed453 100644
--- a/target/linux/ath79/image/generic-ubnt.mk
+++ b/target/linux/ath79/image/generic-ubnt.mk
@@ -24,21 +24,11 @@ define Build/mkubntimage-split
rm $@.old1 $@.old2 )
endef
-define Build/mkubntimage2
- -$(STAGING_DIR_HOST)/bin/mkfwimage2 -f 0x9f000000 \
- -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
- -p jffs2:0x50000:0xf60000:0:0:$@ \
- -o $@.new
- @mv $@.new $@
-endef
-
-
# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
# UBNT_TYPE e.g. one of (BZ, XM, XW)
# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x)
define Device/ubnt
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- DEVICE_PROFILE := UBNT
IMAGE_SIZE := 7552k
UBNT_BOARD := XM
IMAGES := sysupgrade.bin factory.bin
@@ -48,228 +38,40 @@ endef
define Device/ubnt-xm
$(Device/ubnt)
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ohci
+ DEVICE_PACKAGES += kmod-usb-ohci
UBNT_TYPE := XM
UBNT_CHIP := ar7240
ATH_SOC := ar7241
KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | uImage lzma
endef
-define Device/ubnt-xw
- $(Device/ubnt)
- UBNT_TYPE := XW
- UBNT_CHIP := ar934x
-endef
-
define Device/ubnt-bz
$(Device/ubnt)
UBNT_TYPE := BZ
UBNT_CHIP := ar7240
+ ATH_SOC := ar7241
endef
-define Device/rw2458n
- $(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti RW2458N
- BOARDNAME := RW2458N
-endef
-#TARGET_DEVICES += rw2458n
-
-define Device/ubnt-airrouter
- $(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti AirRouter
- BOARDNAME := UBNT-AR
-endef
-#TARGET_DEVICES += ubnt-airrouter
-
define Device/ubnt_bullet-m
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti Bullet-M
- BOARDNAME := UBNT-BM
endef
TARGET_DEVICES += ubnt_bullet-m
define Device/ubnt_rocket-m
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti Rocket-M
- BOARDNAME := UBNT-RM
endef
TARGET_DEVICES += ubnt_rocket-m
define Device/ubnt_nano-m
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti Nano-M
- BOARDNAME := UBNT-NM
endef
TARGET_DEVICES += ubnt_nano-m
define Device/ubnt_unifi
$(Device/ubnt-bz)
- ATH_SOC := ar7241
DEVICE_TITLE := Ubiquiti UniFi
- BOARDNAME := UBNT-UF
- DEVICE_PROFILE += UBNTUNIFI
endef
TARGET_DEVICES += ubnt_unifi
-
-define Device/ubnt-unifiac
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- DEVICE_PROFILE := UBNT
- IMAGE_SIZE := 7744k
- MTDPARTS := spi0.0:384k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),7744k(ubnt-airos)ro,128k(bs),256k(cfg)ro,64k(EEPROM)ro
- IMAGES := sysupgrade.bin
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
-endef
-
-define Device/ubnt-unifiac-lite
- $(Device/ubnt-unifiac)
- DEVICE_TITLE := Ubiquiti UniFi AC-Lite
- DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
- DEVICE_PROFILE += UBNTUNIFIACLITE
- BOARDNAME := UBNT-UF-AC-LITE
-endef
-#TARGET_DEVICES += ubnt-unifiac-lite
-
-define Device/ubnt-unifiac-mesh
- $(Device/ubnt-unifiac-lite)
- DEVICE_TITLE := Ubiquiti UniFi AC-Mesh
-endef
-#TARGET_DEVICES += ubnt-unifiac-mesh
-
-define Device/ubnt-unifiac-pro
- $(Device/ubnt-unifiac)
- DEVICE_TITLE := Ubiquiti UniFi AC-Pro
- DEVICE_PACKAGES += kmod-ath10k ath10k-firmware-qca988x
- DEVICE_PROFILE += UBNTUNIFIACPRO
- BOARDNAME := UBNT-UF-AC-PRO
-endef
-#TARGET_DEVICES += ubnt-unifiac-pro
-
-define Device/ubnt-unifi-outdoor
- $(Device/ubnt-bz)
- DEVICE_TITLE := Ubiquiti UniFi Outdoor
- BOARDNAME := UBNT-U20
- DEVICE_PROFILE += UBNTUNIFIOUTDOOR
-endef
-#TARGET_DEVICES += ubnt-unifi-outdoor
-
-define Device/ubnt-nano-m-xw
- $(Device/ubnt-xw)
- DEVICE_TITLE := Ubiquiti Nano M XW
- BOARDNAME := UBNT-NM-XW
-endef
-#TARGET_DEVICES += ubnt-nano-m-xw
-
-define Device/ubnt-loco-m-xw
- $(Device/ubnt-xw)
- DEVICE_TITLE := Ubiquiti Loco XW
- BOARDNAME := UBNT-LOCO-XW
-endef
-#TARGET_DEVICES += ubnt-loco-m-xw
-
-define Device/ubnt-rocket-m-xw
- $(Device/ubnt-xw)
- DEVICE_TITLE := Ubiquiti Rocket M XW
- BOARDNAME := UBNT-RM-XW
-endef
-#TARGET_DEVICES += ubnt-rocket-m-xw
-
-define Device/ubnt-rocket-m-ti
- $(Device/ubnt-xw)
- DEVICE_TITLE := Ubiquiti Rocket M TI
- BOARDNAME := UBNT-RM-TI
- UBNT_TYPE := TI
-endef
-#TARGET_DEVICES += ubnt-rocket-m-ti
-
-define Device/ubnt-air-gateway
- $(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti Air Gateway
- BOARDNAME := UBNT-AGW
- UBNT_TYPE := AirGW
- UBNT_CHIP := ar933x
- CONSOLE := ttyATH0,115200
-endef
-#TARGET_DEVICES += ubnt-air-gateway
-
-define Device/ubnt-air-gateway-pro
- $(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti Air Gateway Pro
- BOARDNAME := UBNT-AGWP
- UBNT_TYPE := AirGWP
- UBNT_CHIP := ar934x
-endef
-#TARGET_DEVICES += ubnt-air-gateway-pro
-
-define Device/ubdev01
- $(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti ubDEV01
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro
- BOARDNAME := UBNT-UF
- UBNT_BOARD := UBDEV01
-endef
-#TARGET_DEVICES += ubdev01
-
-define Device/ubnt-routerstation
- DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2
- DEVICE_PROFILE := UBNT
- IMAGE_SIZE := 16128k
- IMAGES := sysupgrade.bin factory.bin
- IMAGE/factory.bin := append-rootfs | pad-rootfs | mkubntimage
- IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | combined-image | check-size $$$$(IMAGE_SIZE)
- KERNEL := kernel-bin | patch-cmdline | lzma | pad-to $$(BLOCKSIZE)
-endef
-
-define Device/ubnt-rs
- $(Device/ubnt-routerstation)
- DEVICE_TITLE := Ubiquiti RouterStation
- BOARDNAME := UBNT-RS
- DEVICE_PROFILE += UBNTRS
- UBNT_BOARD := RS
- UBNT_TYPE := RSx
- UBNT_CHIP := ar7100
-endef
-#TARGET_DEVICES += ubnt-rs
-
-define Device/ubnt-rspro
- $(Device/ubnt-routerstation)
- DEVICE_TITLE := Ubiquiti RouterStation Pro
- BOARDNAME := UBNT-RSPRO
- DEVICE_PROFILE += UBNTRSPRO
- UBNT_BOARD := RSPRO
- UBNT_TYPE := RSPRO
- UBNT_CHIP := ar7100pro
-endef
-#TARGET_DEVICES += ubnt-rspro
-
-define Device/ubnt-ls-sr71
- $(Device/ubnt-routerstation)
- DEVICE_TITLE := Ubiquiti LS-SR71
- BOARDNAME := UBNT-LS-SR71
- UBNT_BOARD := LS-SR71
- UBNT_TYPE := LS-SR71
- UBNT_CHIP := ar7100
-endef
-#TARGET_DEVICES += ubnt-ls-sr71
-
-define Device/ubnt-uap-pro
- DEVICE_TITLE := Ubiquiti UAP Pro
- KERNEL_SIZE := 1536k
- IMAGE_SIZE := 15744k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1536k(kernel),14208k(rootfs),256k(cfg)ro,64k(EEPROM)ro,15744k at 0x50000(firmware)
- UBNT_TYPE := BZ
- UBNT_CHIP := ar934x
- BOARDNAME := UAP-PRO
- DEVICE_PROFILE := UBNT UAPPRO
- KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 kernel0
- IMAGES := sysupgrade.bin factory.bin
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage2
-endef
-
-define Device/ubnt-unifi-outdoor-plus
- $(Device/ubnt-uap-pro)
- DEVICE_TITLE := Ubiquiti UniFi Outdoor Plus
- UBNT_CHIP := ar7240
- BOARDNAME := UBNT-UOP
- DEVICE_PROFILE := UBNT
-endef
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index d698360..3488e62 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -25,8 +25,8 @@ define Device/embeddedwireless_dorin
ATH_SOC := ar9331
DEVICE_TITLE := Embedded Wireless Dorin
DEVICE_PACKAGES := kmod-usb-chipidea2
+ IMAGE_SIZE := 16000k
endef
-
TARGET_DEVICES += embeddedwireless_dorin
define Device/glinet_ar150
@@ -40,54 +40,32 @@ TARGET_DEVICES += glinet_ar150
define Device/openmesh_om5p-ac-v2
ATH_SOC := qca9558
DEVICE_TITLE := OpenMesh OM5P-AC v2
- DEVICE_PROFILE := OM5P-AC
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x om-watchdog
+ IMAGE_SIZE := 7808k
endef
-
TARGET_DEVICES += openmesh_om5p-ac-v2
-define Device/netgear_wndr3700
- ATH_SOC:=ar7100
- DEVICE_TITLE := NETGEAR WNDR3700
- DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-reset
- NETGEAR_KERNEL_MAGIC := 0x33373030
- NETGEAR_BOARD_ID := WNDR3700
- IMAGE_SIZE := 7680k
- IMAGES := sysupgrade.bin factory.img factory-NA.img
- KERNEL := kernel-bin | append-dtb | lzma -d20 | netgear-uImage lzma
- KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma -d20 | netgear-uImage lzma
- IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs
- IMAGE/sysupgrade.bin := $$(IMAGE/default) | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory.img := $$(IMAGE/default) | netgear-dni | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory-NA.img := $$(IMAGE/default) | netgear-dni NA | check-size $$$$(IMAGE_SIZE)
-endef
-#TARGET_DEVICES += netgear_wndr3700
-
-define Device/netgear_wndr3700v2
- $(Device/netgear_wndr3700)
- DEVICE_TITLE := NETGEAR WNDR3700 v2
- NETGEAR_BOARD_ID := WNDR3700v2
- NETGEAR_KERNEL_MAGIC := 0x33373031
- NETGEAR_HW_ID := 29763654+16+64
- IMAGE_SIZE := 15872k
- IMAGES := sysupgrade.bin factory.img
-endef
-#TARGET_DEVICES += netgear_wndr3700v2
-
define Device/netgear_wndr3800
- $(Device/netgear_wndr3700v2)
ATH_SOC := ar7161
DEVICE_TITLE := NETGEAR WNDR3800
+ NETGEAR_KERNEL_MAGIC := 0x33373031
+ KERNEL := kernel-bin | append-dtb | lzma -d20 | netgear-uImage lzma
+ KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma -d20 | netgear-uImage lzma
NETGEAR_BOARD_ID := WNDR3800
NETGEAR_HW_ID := 29763654+16+128
+ IMAGE_SIZE := 15872k
+ IMAGES := sysupgrade.bin factory.img
+ IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs
+ IMAGE/sysupgrade.bin := $$(IMAGE/default) | check-size $$$$(IMAGE_SIZE)
+ IMAGE/factory.img := $$(IMAGE/default) | netgear-dni | check-size $$$$(IMAGE_SIZE)
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-reset
endef
TARGET_DEVICES += netgear_wndr3800
define Device/buffalo_wzr-hp-g450h
ATH_SOC := ar7242
DEVICE_TITLE := Buffalo WZR-HP-G450H
- DEVICE_PROFILE := WZR-HP-G450H
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
+ IMAGE_SIZE := 32256k
endef
-
TARGET_DEVICES += buffalo_wzr-hp-g450h
diff --git a/target/linux/ath79/image/legacy.mk b/target/linux/ath79/image/legacy.mk
deleted file mode 100644
index cbc859d..0000000
--- a/target/linux/ath79/image/legacy.mk
+++ /dev/null
@@ -1,1058 +0,0 @@
-rootfs_type=$(patsubst squashfs-%,squashfs,$(1))
-
-# $(1): rootfs type.
-# $(2): board name.
-define imgname
-$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(call rootfs_type,$(1))
-endef
-
-define rootfs_align
-$(patsubst %-256k,0x40000,$(patsubst %-128k,0x20000,$(patsubst %-64k,0x10000,$(patsubst squashfs%,0x4,$(patsubst root.%,%,$(1))))))
-endef
-
-define sysupname
-$(call imgname,$(1),$(2))-sysupgrade.bin
-endef
-
-define factoryname
-$(call imgname,$(1),$(2))-factory.bin
-endef
-
-COMMA:=,
-
-define mkcmdline
-$(if $(1),board=$(1) )$(if $(2),console=$(2)$(COMMA)$(3))
-endef
-
-define mtdpartsize
-$(shell sz=`echo '$(2)' | sed -ne 's/.*[:$(COMMA)]\([0-9]*\)k[@]*[0-9a-zx]*($(1)).*/\1/p'`; [ -n "$$sz" ] && echo $$(($$sz * 1024)))
-endef
-
-# $(1) : name of image build method to be used, e.g., AthLzma.
-# $(2) : name of the build template to be used, e.g. 64k, 64kraw, 128k, etc.
-# $(3) : name of the profile to be defined.
-# $(4) : board name.
-# $(5)~$(7) : arguments for $(mkcmdline)
-# board=$(1) console=$(2),$(3)
-# $(8)~$(14): extra arguments.
-define SingleProfile
- # $(1): action name, e.g. loader, buildkernel, squashfs, etc.
- define Image/Build/Profile/$(3)
- $$(call Image/Build/Template/$(2)/$$(1),$(1),$(4),$$(call mkcmdline,$(5),$(6),$(7)),$(8),$(9),$(10),$(11),$(12),$(13),$(14))
- endef
-endef
-
-LOADER_MAKE := $(NO_TRACE_MAKE) -C lzma-loader KDIR=$(KDIR)
-
-VMLINUX:=$(BIN_DIR)/$(IMG_PREFIX)-vmlinux
-UIMAGE:=$(BIN_DIR)/$(IMG_PREFIX)-uImage
-
-# $(1): input file.
-# $(2): output file.
-# $(3): extra arguments for lzma.
-define CompressLzma
- $(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(3) $(2)
-endef
-
-define PatchKernel
- cp $(KDIR)/vmlinux$(3) $(KDIR_TMP)/vmlinux$(3)-$(1)
- $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(3)-$(1) "$(strip $(2))"
-endef
-
-define PatchKernel/initramfs
- $(call PatchKernel,$(1),$(2),-initramfs)
- cp $(KDIR_TMP)/vmlinux-initramfs-$(1) $(call imgname,initramfs,$(1)).bin
-endef
-
-# $(1): board name.
-# $(2): kernel command line.
-# $(3): extra argumetns for lzma.
-# $(4): name suffix, e.g. "-initramfs".
-define PatchKernelLzma
- cp $(KDIR)/vmlinux$(4) $(KDIR_TMP)/vmlinux$(4)-$(1)
- $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(4)-$(1) "$(strip $(2))"
- $(call CompressLzma,$(KDIR_TMP)/vmlinux$(4)-$(1),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(3))
-endef
-
-define PatchKernelGzip
- cp $(KDIR)/vmlinux$(3) $(KDIR_TMP)/vmlinux$(3)-$(1)
- $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(3)-$(1) "$(strip $(2))"
- gzip -9n -c $(KDIR_TMP)/vmlinux$(3)-$(1) > $(KDIR_TMP)/vmlinux$(3)-$(1).bin.gz
-endef
-
-ifneq ($(SUBTARGET),mikrotik)
-# $(1): compression method of the data.
-# $(2): extra arguments.
-# $(3): input data file.
-# $(4): output file.
-define MkuImage
- mkimage -A mips -O linux -T kernel -a 0x80060000 -C $(1) $(2) \
- -e 0x80060000 -n 'MIPS $(VERSION_DIST) Linux-$(LINUX_VERSION)' \
- -d $(3) $(4)
-endef
-
-# $(1): board name.
-# $(2): kernel command line.
-# $(3): extra arguments for lzma.
-# $(4): name suffix, e.g. "-initramfs".
-# $(5): extra arguments for mkimage.
-define MkuImageLzma
- $(call PatchKernelLzma,$(1),$(2),$(3),$(4))
- $(call MkuImage,lzma,$(5),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(KDIR_TMP)/vmlinux$(4)-$(1).uImage)
-endef
-
-define MkuImageLzma/initramfs
- $(call PatchKernelLzma,$(1),$(2),$(3),-initramfs)
- $(call MkuImage,lzma,$(4),$(KDIR_TMP)/vmlinux-initramfs-$(1).bin.lzma,$(call imgname,initramfs,$(1))-uImage.bin)
-endef
-
-define MkuImageGzip
- $(call PatchKernelGzip,$(1),$(2))
- $(call MkuImage,gzip,,$(KDIR_TMP)/vmlinux-$(1).bin.gz,$(KDIR_TMP)/vmlinux-$(1).uImage)
-endef
-
-define MkuImageGzip/initramfs
- $(call PatchKernelGzip,$(1),$(2),-initramfs)
- $(call MkuImage,gzip,,$(KDIR_TMP)/vmlinux-initramfs-$(1).bin.gz,$(call imgname,initramfs,$(1))-uImage.bin)
-endef
-
-define MkuImageOKLI
- $(call MkuImage,lzma,-M 0x4f4b4c49,$(KDIR)/vmlinux.bin.lzma,$(KDIR_TMP)/vmlinux-$(1).okli)
-endef
-endif
-
-# $(1): name of the 1st file.
-# $(2): size limit of the 1st file if it is greater than 262144, or
-# the erase size of the flash if it is greater than zero and less
-# than 262144
-# $(3): name of the 2nd file.
-# $(4): size limit of the 2nd file if $(2) is greater than 262144, otherwise
-# it is the size limit of the output file
-# $(5): name of the output file.
-# $(6): padding size.
-define CatFiles
- if [ $(2) -eq 0 ]; then \
- filename="$(3)"; fstype=$${filename##*\.}; \
- case "$${fstype}" in \
- *) bs=`stat -c%s $(1)`;; \
- esac; \
- ( dd if=$(1) bs=$${bs} conv=sync; cat $(3) ) > $(5); \
- if [ -n "$(6)" ]; then \
- case "$${fstype}" in \
- squashfs*) \
- padjffs2 $(5) $(6); \
- ;; \
- esac; \
- fi; \
- if [ `stat -c%s $(5)` -gt $(4) ]; then \
- echo "Warning: $(5) is too big (> $(4) bytes)" >&2; \
- rm -f $(5); \
- fi; \
- else if [ $(2) -gt 262144 ]; then \
- if [ `stat -c%s "$(1)"` -gt $(2) ]; then \
- echo "Warning: $(1) is too big (> $(2) bytes)" >&2; \
- else if [ `stat -c%s $(3)` -gt $(4) ]; then \
- echo "Warning: $(3) is too big (> $(4) bytes)" >&2; \
- else \
- ( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \
- fi; fi; \
- else \
- ( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \
- if [ `stat -c%s $(5)` -gt $(4) ]; then \
- echo "Warning: $(5) is too big (> $(4) bytes)" >&2; \
- rm -f $(5); \
- fi; \
- fi; fi
-endef
-
-# $(1): rootfs type.
-# $(2): board name.
-# $(3): kernel image size limit.
-# $(4): rootfs image size limit.
-# $(5): padding argument for padjffs2.
-Sysupgrade/KR=$(call CatFiles,$(2),$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(5)))
-Sysupgrade/KRuImage=$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(2)),$(5))
-Sysupgrade/RKuImage=$(call CatFiles,$(KDIR)/root.$(1),$(4),$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(call sysupname,$(1),$(2)))
-
-# $(1): ubinize ini file
-# $(2): working directory
-# $(3): output file
-# $(4): physical erase block size
-# $(5): minimum I/O unit size
-# $(6): custom options
-define ubinize
- $(CP) $(1) $(2)
- ( cd $(2); $(STAGING_DIR_HOST)/bin/ubinize -o $(3) -p $(4) -m $(5) $(6) $(1))
-endef
-
-#
-# Embed lzma-compressed kernel inside lzma-loader.
-#
-# $(1), suffix of output filename, e.g. generic, lowercase board name, etc.
-# $(2), suffix of target file to build, e.g. bin, gz, elf
-# $(3), kernel command line to pass from lzma-loader to kernel
-# $(4), unused here
-# $(5), suffix of kernel filename, e.g. -initramfs, or empty
-define Image/BuildLoader
- -rm -rf $(KDIR)/lzma-loader
- $(LOADER_MAKE) LOADER=loader-$(1).$(2) KERNEL_CMDLINE="$(3)"\
- LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
- LOADER_DATA="$(KDIR)/vmlinux$(5).bin.lzma" BOARD="$(1)" \
- compile loader.$(2)
- -$(if $(5),$(CP) $(KDIR)/loader-$(1).$(2) $(KDIR)/loader-$(1)$(5).$(2))
-endef
-
-#
-# Build lzma-loader alone which will search for lzma-compressed kernel identified by
-# uImage header with magic "OKLI" at boot time.
-#
-# $(4), offset into the flash space to start searching uImage magic "OKLI".
-# $(5), size of search range starting at $(4). With 0 as the value, uImage
-# header is expected to be at precisely $(4)
-define Image/BuildLoaderAlone
- -rm -rf $(KDIR)/lzma-loader
- $(LOADER_MAKE) LOADER=loader-$(1).$(2) KERNEL_CMDLINE="$(3)" \
- LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
- BOARD="$(1)" FLASH_OFFS=$(4) FLASH_MAX=$(5) \
- compile loader.$(2)
-endef
-
-define Build/Clean
- $(LOADER_MAKE) clean
-endef
-
-alfa_ap120c_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,13312k(rootfs),1536k(kernel),1152k(unknown)ro,64k(art)ro;spi0.1:-(unknown)
-alfa_ap96_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13312k(rootfs),2048k(kernel),512k(caldata)ro,15360k at 0x80000(firmware)
-alfa_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1600k(kernel),64k(nvram),64k(art)ro,7744k at 0x50000(firmware)
-alfa_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,15936k(firmware),64k(nvram),64k(art)ro
-all0258n_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),6272k(firmware),1536k(failsafe),64k(art)ro
-all0315n_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env),13568k(firmware),2048k(failsafe),256k(art)ro
-ap96_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1728k(kernel),64k(art)ro,7872k at 0x40000(firmware)
-ap121_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1600k(kernel),64k(nvram),64k(art)ro,7744k at 0x50000(firmware)
-ap121_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,10944k(rootfs),4992k(kernel),64k(nvram),64k(art)ro,15936k at 0x50000(firmware)
-ap132_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),6400k(rootfs),64k(art)ro,7808k at 0x50000(firmware)
-ap135_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k at 0x50000(firmware)
-ap136_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(mib0),64k(art)ro,7744k at 0x50000(firmware)
-ap143_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1472k(kernel),64k(art)ro,7744k at 0x50000(firmware)
-ap143_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k at 0x50000(firmware)
-ap147_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k at 0x50000(firmware)
-ap152_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k at 0x50000(firmware)
-bxu2000n2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),8448k(rootfs),6016k(user),64k(cfg),64k(oem),64k(art)ro
-cameo_ap81_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(config)ro,3840k(firmware),64k(art)ro
-cameo_ap91_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3712k(firmware),64k(mac)ro,64k(art)ro
-cameo_ap99_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3520k(firmware),64k(mac)ro,192k(lp)ro,64k(art)ro
-cameo_ap121_mtdlayout=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,192k(language)ro,3648k(firmware)
-cameo_ap121_mtdlayout_8M=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,256k(language)ro,7680k at 0x80000(firmware)
-cameo_ap123_mtdlayout_4M=mtdparts=spi0.0:64k(u-boot)ro,64k(nvram)ro,3712k(firmware),192k(lang)ro,64k(art)ro
-cameo_db120_mtdlayout=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,15936k(firmware),192k(lang)ro,64k(mac)ro,64k(art)ro
-cameo_db120_mtdlayout_8M=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,7872k(firmware),128k(lang)ro,64k(art)ro
-cap4200ag_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom)ro,1536k(kernel),12096k(rootfs),2048k(failsafe),64k(art)ro,13632k at 0xa0000(firmware)
-eap300v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom),13632k(firmware),2048k(failsafe),64k(art)ro
-db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k at 0x50000(firmware)
-dgl_5500_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro
-dlan_hotspot_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(Config1)ro,64k(Config2)ro,7872k at 0x40000(firmware),64k(art)ro
-dlan_pro_500_wp_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(Config1)ro,64k(Config2)ro,7680k at 0x70000(firmware),64k(art)ro
-dlan_pro_1200_ac_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(Config1)ro,64k(Config2)ro,15872k at 0x70000(firmware),64k(art)ro
-cameo_ap94_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,1600k(unknown)ro,64k at 0x7f0000(caldata_copy)
-cameo_ap94_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7808k(firmware),64k(caldata)ro,64k at 0x660000(caldata_orig),6208k at 0x50000(firmware_orig)
-esr900_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k at 0x40000(firmware)
-esr1750_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k at 0x40000(firmware)
-epg5000_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k at 0x40000(firmware)
-f9k1115v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),14464k(rootfs),1408k(kernel),64k(nvram)ro,64k(envram)ro,64k(art)ro,15872k at 0x50000(firmware)
-dlrtdev_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,640k(certs),960k(unknown)ro,64k at 0x7f0000(caldata_copy)
-dlrtdev_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7168k(firmware),640k(certs),64k(caldata)ro,64k at 0x660000(caldata_orig),6208k at 0x50000(firmware_orig)
-planex_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),128k(art)ro
-whrhpg300n_mtdlayout=mtdparts=spi0.0:248k(u-boot)ro,8k(u-boot-env)ro,3712k(firmware),64k(art)ro
-wndap360_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),64k(nvram)ro,64k(art)ro
-wnr2200_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro
-wnr2000_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro
-wnr2000v3_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro
-wnr2000v4_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,3776k(firmware),64k(art)ro
-r6100_mtdlayout=mtdparts=ar934x-nfc:128k(u-boot)ro,256k(caldata)ro,256k(caldata-backup),512k(config),512k(pot),2048k(kernel),122240k(ubi),25600k at 0x1a0000(firmware),2048k(language),3072k(traffic_meter)
-tew823dru_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro
-wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata)ro,512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),23552k(ubi),25600k at 0x6c0000(firmware),256k(caldata_backup),-(reserved)
-zcn1523h_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6208k(rootfs),1472k(kernel),64k(configure)ro,64k(mfg)ro,64k(art)ro,7680k at 0x50000(firmware)
-mynet_rext_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,7808k(firmware),64k(nvram)ro,64k(ART)ro
-zyx_nbg6716_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(env)ro,64k(RFdata)ro,-(nbu);ar934x-nfc:2048k(zyxel_rfsd),2048k(romd),1024k(header),2048k(kernel),-(ubi)
-
-define Image/BuildKernel
- cp $(KDIR)/vmlinux.elf $(VMLINUX).elf
- cp $(KDIR)/vmlinux $(VMLINUX).bin
- dd if=$(KDIR)/vmlinux.bin.lzma of=$(VMLINUX).lzma bs=65536 conv=sync
- $(call MkuImage,lzma,,$(KDIR)/vmlinux.bin.lzma,$(UIMAGE)-lzma.bin)
- cp $(KDIR)/loader-generic.elf $(VMLINUX)-lzma.elf
- -mkdir -p $(KDIR_TMP)
-endef
-
-define Image/BuildKernel/Initramfs
- cp $(KDIR)/vmlinux-initramfs.elf $(VMLINUX)-initramfs.elf
- cp $(KDIR)/vmlinux-initramfs $(VMLINUX)-initramfs.bin
- dd if=$(KDIR)/vmlinux-initramfs.bin.lzma of=$(VMLINUX)-initramfs.lzma bs=65536 conv=sync
- $(call MkuImage,lzma,,$(KDIR)/vmlinux-initramfs.bin.lzma,$(UIMAGE)-initramfs-lzma.bin)
- cp $(KDIR)/loader-generic-initramfs.elf $(VMLINUX)-initramfs-lzma.elf
- $(call Image/Build/Initramfs)
-endef
-
-Image/Build/WRT400N/buildkernel=$(call MkuImageLzma,$(2),$(3))
-
-define Image/Build/WRT400N
- $(call Sysupgrade/KRuImage,$(1),$(2),1310720,6488064)
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- wrt400n $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR)/root.$(1) $(call factoryname,$(1),$(2)); \
- fi
-endef
-
-
-define Image/Build/CameoAP94/buildkernel
- $(call MkuImageLzma,$(2),$(3) $(4))
- $(call MkuImageLzma,$(2)-fat,$(3) $(5))
-endef
-
-define Image/Build/CameoAP94
- $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
- $(eval fwsize_fat=$(call mtdpartsize,firmware,$(5)))
- $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64)
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- ( \
- dd if=$(call sysupname,$(1),$(2)); \
- echo -n "$(6)"; \
- ) > $(call imgname,$(1),$(2))-backup-loader.bin; \
- if [ `stat -c%s $(call sysupname,$(1),$(2))` -gt 4194304 ]; then \
- echo "Warning: $(call sysupname,$(1),$(2)) is too big" >&2; \
- else \
- ( \
- dd if=$(call sysupname,$(1),$(2)) bs=4096k conv=sync; \
- echo -n "$(7)"; \
- ) > $(call factoryname,$(1),$(2)); \
- fi; \
- fi
- $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2)-fat.uImage,0,$(KDIR)/root.$(1),$$(($(fwsize_fat)-4*64*1024)),$(KDIR_TMP)/$(2)-fat.bin,64)
- if [ -e "$(KDIR_TMP)/$(2)-fat.bin" ]; then \
- echo -n "" > $(KDIR_TMP)/$(2)-fat.dummy; \
- sh $(TOPDIR)/scripts/combined-image.sh \
- "$(KDIR_TMP)/$(2)-fat.bin" \
- "$(KDIR_TMP)/$(2)-fat.dummy" \
- $(call sysupname,$(1),$(2)-fat); \
- fi
-endef
-
-define Image/Build/WZRHP
- $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(3)-4*$(4)*1024)),$(4))
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- ( \
- echo -n -e "# Airstation Public Fmt1\x00\x00\x00\x00\x00\x00\x00\x00"; \
- dd if=$(call sysupname,$(1),$(2)); \
- ) > $(call imgname,$(1),$(2))-tftp.bin; \
- buffalo-enc -p $(5) -v 1.99 \
- -i $(call sysupname,$(1),$(2)) \
- -o $(KDIR_TMP)/$(2).enc; \
- buffalo-tag -b $(5) -p $(5) -a ath -v 1.99 -m 1.01 -l mlang8 \
- -w 3 -c 0x80041000 -d 0x801e8000 -f 1 -r M_ \
- -i $(KDIR_TMP)/$(2).enc \
- -o $(call factoryname,$(1),$(2)); \
- fi
-endef
-
-Image/Build/WZRHP64K/buildkernel=$(call MkuImageLzma,$(2),$(3))
-Image/Build/WZRHP64K/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-Image/Build/WZRHP64K=$(call Image/Build/WZRHP,$(1),$(2),33095680,64,$(4))
-
-Image/Build/WZRHP128K/buildkernel=$(call MkuImageLzma,$(2),$(3))
-Image/Build/WZRHP128K/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-Image/Build/WZRHP128K=$(call Image/Build/WZRHP,$(1),$(2),33030144,128,$(4))
-
-
-Image/Build/WHRHPG300N/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
-Image/Build/WHRHPG300N/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-
-define Image/Build/WHRHPG300N
- $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
- $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64)
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- ( \
- echo -n -e "# Airstation Public Fmt1\x00\x00\x00\x00\x00\x00\x00\x00"; \
- dd if=$(call sysupname,$(1),$(2)); \
- ) > $(call imgname,$(1),$(2))-tftp.bin; \
- buffalo-enc -p $(5) -v 1.99 \
- -i $(call sysupname,$(1),$(2)) \
- -o $(KDIR_TMP)/$(2).enc; \
- buffalo-tag -b $(5) -p $(5) -a ath -v 1.99 -m 1.01 -l mlang8 \
- -w 3 -c 0x80041000 -d 0x801e8000 -f 1 -r M_ \
- -i $(KDIR_TMP)/$(2).enc \
- -o $(call factoryname,$(1),$(2)); \
- fi
-endef
-
-
-define Image/Build/Cameo
- $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
- $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64)
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- factory_size=$$(($(fwsize) - $(6))); \
- ( \
- dd if=$(call sysupname,$(1),$(2)) bs=$${factory_size} conv=sync; \
- echo -n $(5); \
- ) > $(call factoryname,$(1),$(2)); \
- fi
-endef
-
-Image/Build/CameoAP81/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap81_mtdlayout))
-Image/Build/CameoAP81=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap81_mtdlayout),$(4),65536)
-Image/Build/CameoAP81/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap81_mtdlayout))
-
-Image/Build/CameoAP91/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap91_mtdlayout))
-Image/Build/CameoAP91=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap91_mtdlayout),$(4),65536)
-Image/Build/CameoAP91/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap91_mtdlayout))
-
-Image/Build/CameoAP99/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap99_mtdlayout))
-Image/Build/CameoAP99=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap99_mtdlayout),$(4),65536)
-Image/Build/CameoAP99/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap99_mtdlayout))
-
-Image/Build/CameoAP123_4M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap123_mtdlayout_4M))
-Image/Build/CameoAP123_4M=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap123_mtdlayout_4M),$(4),26)
-Image/Build/CameoAP123_4M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap123_mtdlayout_4M))
-
-Image/Build/CameoAP135/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
-Image/Build/CameoAP135=$(call Image/Build/Cameo,$(1),$(2),$(3),$(4),$(5),26)
-Image/Build/CameoAP135/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-
-Image/Build/CameoDB120/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_db120_mtdlayout))
-Image/Build/CameoDB120=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_db120_mtdlayout),$(4),26)
-Image/Build/CameoDB120/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_db120_mtdlayout))
-
-Image/Build/CameoDB120_8M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_db120_mtdlayout_8M))
-Image/Build/CameoDB120_8M=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_db120_mtdlayout_8M),$(4),26)
-Image/Build/CameoDB120_8M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_db120_mtdlayout_8M))
-
-define Image/Build/CameoHornet
- $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
- $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64)
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- for r in $(7); do \
- [ -n "$$r" ] && dashr="-$$r" || dashr=; \
- [ -z "$$r" ] && r="DEF"; \
- mkcameofw -M HORNET -R "$$r" -S $(5) -V $(6) -c \
- -K $(8) -I $(fwsize) \
- -k "$(call sysupname,$(1),$(2))" \
- -o $(call imgname,$(1),$(2))-factory$$dashr.bin; \
- true; \
- done; \
- fi
-endef
-
-Image/Build/CameoAP121/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap121_mtdlayout))
-Image/Build/CameoAP121=$(call Image/Build/CameoHornet,$(1),$(2),$(3),$(cameo_ap121_mtdlayout),$(4),$(5),$(6),0xe0000)
-Image/Build/CameoAP121/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap121_mtdlayout))
-
-Image/Build/CameoAP121_8M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap121_mtdlayout_8M))
-Image/Build/CameoAP121_8M=$(call Image/Build/CameoHornet,$(1),$(2),$(3),$(cameo_ap121_mtdlayout_8M),$(4),$(5),$(6),0x100000)
-Image/Build/CameoAP121_8M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap121_mtdlayout_8M))
-
-define Image/Build/dLAN
- $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
- $(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
- $(eval kernsize=$(call mtdpartsize,kernel,$(4)))
- $(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize)))
-endef
-
-Image/Build/dLANLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
-Image/Build/dLANLzma=$(call Image/Build/dLAN,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
-Image/Build/dLANLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-
-define Image/Build/Ath
- $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
- $(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
- $(eval kernsize=$(call mtdpartsize,kernel,$(4)))
- $(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize)))
-endef
-
-Image/Build/AthGzip/buildkernel=$(call MkuImageGzip,$(2),$(3) $(4))
-Image/Build/AthGzip=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
-Image/Build/AthGzip/initramfs=$(call MkuImageGzip/initramfs,$(2),$(3) $(4))
-
-Image/Build/AthLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
-Image/Build/AthLzma=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
-Image/Build/AthLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-
-
-Image/Build/Belkin/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
-Image/Build/Belkin/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-
-define Image/Build/Belkin
- $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
- $(eval kernsize=$(call mtdpartsize,kernel,$(4)))
- $(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
- $(call Sysupgrade/RKuImage,$(1),$(2),$(kernsize),$(rootsize))
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- edimax_fw_header -m $(5) -v "$(shell echo -n $(VERSION_DIST)$(REVISION) | cut -c -13)" \
- -n "uImage" \
- -i $(KDIR_TMP)/vmlinux-$(2).uImage \
- -o $(KDIR_TMP)/$(2)-uImage; \
- edimax_fw_header -m $(5) -v "$(shell echo -n $(VERSION_DIST)$(REVISION) | cut -c -13)" \
- -n "rootfs" \
- -i $(KDIR)/root.$(1) \
- -o $(KDIR_TMP)/$(2)-rootfs; \
- ( \
- dd if=$(KDIR_TMP)/$(2)-rootfs; \
- dd if=$(KDIR_TMP)/$(2)-uImage; \
- ) > "$(call factoryname,$(1),$(2))"; \
- fi
-endef
-
-define Image/Build/EnGenius
- $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
- $(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
- $(eval kernsize=$(call mtdpartsize,kernel,$(4)))
- $(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize)))
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- mksenaofw -e $(call sysupname,$(1),$(2)) \
- -o $(call imgname,$(1),$(2))-factory.dlf \
- -r 0x101 -p $(7) -t 2; \
- fi
-endef
-
-Image/Build/EnGenius/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
-Image/Build/EnGenius/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-
-
-Image/Build/PB4X/buildkernel=$(call PatchKernelLzma,$(2),$(3))
-
-define Image/Build/PB4X
- dd if=$(KDIR_TMP)/vmlinux-$(2).bin.lzma \
- of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync
- dd if=$(KDIR)/root.$(1) \
- of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync
- -sh $(TOPDIR)/scripts/combined-image.sh \
- "$(call imgname,kernel,$(2)).bin" \
- "$(call imgname,$(1),$(2)-rootfs).bin" \
- $(call sysupname,$(1),$(2))
-endef
-
-
-Image/Build/MyLoader/buildkernel=$(call PatchKernelLzma,$(2),$(3))
-Image/Build/MyLoader/initramfs=$(call PatchKernel/initramfs,$(2),$(3))
-
-define Image/Build/MyLoader
- $(eval fwsize=$(shell echo $$(($(4)-0x30000-4*64*1024))))
- $(eval fwimage=$(KDIR_TMP)/$(2)-$(5)-firmware.bin)
- $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).bin.lzma,65536,$(KDIR)/root.$(1),$(fwsize),$(fwimage))
- if [ -e "$(fwimage)" ]; then \
- $(STAGING_DIR_HOST)/bin/mkmylofw -B $(2) -s $(4) -v \
- -p0x00030000:0:al:0x80060000:firmware:$(fwimage) \
- $(call imgname,$(1),$(2))-$(5)-factory.img; \
- echo -n "" > $(KDIR_TMP)/empty.bin; \
- sh $(TOPDIR)/scripts/combined-image.sh \
- $(fwimage) $(KDIR_TMP)/empty.bin \
- $(call imgname,$(1),$(2))-$(5)-sysupgrade.bin; \
- fi
-endef
-
-Image/Build/Planex/initramfs=$(call MkuImageGzip/initramfs,$(2),$(3) $(planex_mtdlayout))
-Image/Build/Planex/loader=$(call Image/BuildLoaderAlone,$(1),gz,$(2) $(planex_mtdlayout),0x52000,0)
-
-define Image/Build/Planex/buildkernel
- [ -e "$(KDIR)/loader-$(2).gz" ]
- $(call MkuImageOKLI,$(2))
- ( \
- dd if=$(KDIR)/loader-$(2).gz bs=8128 count=1 conv=sync; \
- dd if=$(KDIR_TMP)/vmlinux-$(2).okli; \
- ) > $(KDIR_TMP)/kernel-$(2).bin
- $(call MkuImage,gzip,,$(KDIR_TMP)/kernel-$(2).bin,$(KDIR_TMP)/vmlinux-$(2).uImage)
-endef
-
-define Image/Build/Planex
- $(eval fwsize=$(call mtdpartsize,firmware,$(planex_mtdlayout)))
- $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64)
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- $(STAGING_DIR_HOST)/bin/mkplanexfw \
- -B $(2) \
- -v 2.00.00 \
- -i $(call sysupname,$(1),$(2)) \
- -o $(call factoryname,$(1),$(2)); \
- fi
-endef
-
-
-Image/Build/ALFA/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
-Image/Build/ALFA/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-
-define Image/Build/ALFA
- $(call Sysupgrade/RKuImage,$(1),$(2),$(5),$(6))
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- rm -rf $(KDIR)/$(1); \
- mkdir -p $(KDIR)/$(1); \
- cd $(KDIR)/$(1); \
- cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR)/$(1)/$(7); \
- cp $(KDIR)/root.$(1) $(KDIR)/$(1)/$(8); \
- $(TAR) c \
- $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
- -C $(KDIR)/$(1) $(7) $(8) \
- | gzip -9nc > $(call factoryname,$(1),$(2)); \
- ( \
- echo WRM7222C | dd bs=32 count=1 conv=sync; \
- echo -ne '\xfe'; \
- ) >> $(call factoryname,$(1),$(2)); \
- fi
-endef
-
-
-Image/Build/Senao/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
-Image/Build/Senao/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-
-define Image/Build/Senao
- mkdir -p $(KDIR_TMP)/$(2)/
- touch $(KDIR_TMP)/$(2)/FWINFO-OpenWrt-$(REVISION)-$(2)
- -$(CP) ./$(2)/* $(KDIR_TMP)/$(2)/
- dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \
- of=$(KDIR_TMP)/$(2)/openwrt-senao-$(2)-uImage-lzma.bin bs=64k conv=sync
- dd if=$(KDIR)/root.$(1) \
- of=$(KDIR_TMP)/$(2)/openwrt-senao-$(2)-root.$(1) bs=64k conv=sync
- ( \
- cd $(KDIR_TMP)/$(2)/; \
- $(TAR) -c \
- $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
- * | gzip -9nc > $(call factoryname,$(1),$(2)) \
- )
- -rm -rf $(KDIR_TMP)/$(2)/
- -sh $(TOPDIR)/scripts/combined-image.sh \
- $(KDIR_TMP)/vmlinux-$(2).uImage \
- $(KDIR)/root.$(1) \
- $(call sysupname,$(1),$(2))
-endef
-
-define Image/Build/CyberTAN
- echo -n '' > $(KDIR_TMP)/empty.bin
- -$(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp \
- -f $(KDIR_TMP)/vmlinux-$(2).uImage -F $(KDIR_TMP)/empty.bin \
- -x 32 -a 0x10000 -x -32 -f $(KDIR)/root.$(1) && \
- $(STAGING_DIR_HOST)/bin/addpattern -B $(2) -v v$(5) \
- -i $(KDIR)/image.tmp \
- -o $(call sysupname,$(1),$(2))
- -$(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp -f $(KDIR_TMP)/vmlinux-$(2).uImage \
- -x 32 -a 0x10000 -x -32 -f $(KDIR)/root.$(1) && \
- $(STAGING_DIR_HOST)/bin/addpattern -B $(2) -v v$(5) -g \
- -i $(KDIR)/image.tmp \
- -o $(call factoryname,$(1),$(2))
- -rm $(KDIR)/image.tmp
-endef
-
-Image/Build/CyberTANGZIP/loader=$(call Image/BuildLoader,$(1),gz,$(2),0x80060000)
-Image/Build/CyberTANGZIP/buildkernel=$(call MkuImage,gzip,,$(KDIR)/loader-$(2).gz,$(KDIR_TMP)/vmlinux-$(2).uImage)
-Image/Build/CyberTANGZIP=$(call Image/Build/CyberTAN,$(1),$(2),$(3),$(4),$(5))
-
-Image/Build/CyberTANLZMA/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
-Image/Build/CyberTANLZMA=$(call Image/Build/CyberTAN,$(1),$(2),$(3),$(4),$(5))
-
-
-Image/Build/Netgear/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5))
-
-define Image/Build/Netgear/buildkernel
- $(call MkuImageLzma,$(2),$(3) $(4),-d20,,-M $(5))
- -rm -rf $(KDIR_TMP)/$(2)
- mkdir -p $(KDIR_TMP)/$(2)/image
- cat $(KDIR_TMP)/vmlinux-$(2).uImage > $(KDIR_TMP)/$(2)/image/uImage
- $(STAGING_DIR_HOST)/bin/mksquashfs-lzma \
- $(KDIR_TMP)/$(2) $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp1 \
- -noappend -root-owned -be -b 65536 \
- $(if $(SOURCE_DATE_EPOCH),-fixed-time $(SOURCE_DATE_EPOCH))
- ( \
- cat $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp1; \
- dd if=/dev/zero bs=1k count=1 \
- ) > $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp2
- mkimage -A mips -O linux -T filesystem -C none -M $(5) \
- -a 0xbf070000 -e 0xbf070000 \
- -n 'MIPS $(VERSION_DIST) Linux-$(LINUX_VERSION)' \
- -d $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp2 \
- $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs
-endef
-
-define Image/Build/Netgear
- $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
- $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage.squashfs,0,$(KDIR)/root.$(1),$(fwsize),$(call sysupname,$(1),$(2)),64)
- if [ -e $(call sysupname,$(1),$(2)) ]; then \
- for r in $(7) ; do \
- [ -n "$$r" ] && dashr="-$$r" || dashr= ; \
- $(STAGING_DIR_HOST)/bin/mkdniimg \
- -B $(6) -v $(VERSION_DIST).$(REVISION) -r "$$r" $(8) \
- -i $(call sysupname,$(1),$(2)) \
- -o $(call imgname,$(1),$(2))-factory$$dashr.img; \
- done; \
- fi
- if [ "$2" = "wnr2000" ]; then \
- dd if=$(KDIR)/root.$(1) \
- of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \
- fi
-endef
-
-
-Image/Build/NetgearLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5))
-Image/Build/NetgearLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4),-d20,,-M $(5))
-
-define Image/Build/NetgearLzma
- $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
- $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage,0,$(KDIR)/root.$(1),$(fwsize),$(call sysupname,$(1),$(2)),64)
-endef
-
-
-Image/Build/NetgearNAND/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5))
-
-# $(1): (empty)
-# $(2): Board name (small caps)
-# $(3): Kernel board specific cmdline
-# $(4): Kernel mtdparts definition
-# $(5): U-Boot magic
-define Image/Build/NetgearNAND/buildkernel
- $(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
- $(call PatchKernelLzma,$(2),$(3) $(4),-d20)
- dd if=$(KDIR_TMP)/vmlinux-$(2).bin.lzma \
- of=$(KDIR_TMP)/vmlinux-$(2).bin.tmp \
- bs=$$(($(kernelsize)-131072-2*64-1)) \
- count=1 conv=sync
- $(call MkuImage,lzma,-M $(5),$(KDIR_TMP)/vmlinux-$(2).bin.tmp,$(KDIR_TMP)/vmlinux-$(2).uImage)
- echo -ne '\xff' >> $(KDIR_TMP)/vmlinux-$(2).uImage
- # create a fake rootfs image
- dd if=/dev/zero of=$(KDIR_TMP)/fakeroot-$(2) bs=131072 count=1
- mkimage -A mips -O linux -T filesystem -C none \
- -a 0xbf070000 -e 0xbf070000 \
- -n 'MIPS $(VERSION_DIST) fakeroot' \
- -d $(KDIR_TMP)/fakeroot-$(2) \
- -M $(5) \
- $(KDIR_TMP)/fakeroot-$(2).uImage
- # append the fake rootfs image to the kernel, it will reside in the last
- # erase block of the kernel partition
- cat $(KDIR_TMP)/fakeroot-$(2).uImage >> $(KDIR_TMP)/vmlinux-$(2).uImage
-endef
-
-
-# $(1): rootfs image suffix
-# $(2): Board name (small caps)
-# $(3): Kernel board specific cmdline
-# $(4): Kernel mtdparts definition
-# $(5): U-Boot magic
-# $(6): Board name (upper caps)
-# $(7): firmware region code (not used yet)
-# $(8): DNI Hardware version
-# $(9): suffix of the configuration file for ubinize
-define Image/Build/NetgearNAND
- $(eval firmwaresize=$(call mtdpartsize,firmware,$(4)))
- $(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
- $(eval imageraw=$(KDIR_TMP)/$(2)-raw.img)
- $(CP) $(KDIR)/root.squashfs-raw $(KDIR_TMP)/root.squashfs
- echo -ne '\xde\xad\xc0\xde' > $(KDIR_TMP)/jffs2.eof
- $(call ubinize,ubinize-$(9).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5)
- ( \
- dd if=$(KDIR_TMP)/vmlinux-$(2).uImage; \
- dd if=$(KDIR_TMP)/$(2)-root.ubi \
- ) > $(imageraw)
- $(STAGING_DIR_HOST)/bin/mkdniimg \
- -B $(6) -v $(VERSION_DIST).$(REVISION) -r "$$r" $(8) \
- -i $(imageraw) \
- -o $(call imgname,ubi,$(2))-factory.img
-
- $(call Image/Build/SysupgradeNAND,$(2),squashfs,$(KDIR_TMP)/vmlinux-$(2).uImage)
-endef
-
-ZYXEL_UBOOT = $(KDIR)/u-boot-nbg460n_550n_550nh.bin
-ZYXEL_UBOOT_BIN = $(wildcard $(BIN_DIR)/u-boot-nbg460n_550n_550nh/u-boot.bin)
-
-Image/Build/ZyXEL/buildkernel=$(call MkuImageLzma,$(2),$(3))
-
-define Image/Build/ZyXEL
- $(call Sysupgrade/KRuImage,$(1),$(2),917504,2752512)
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- if [ ! -f $(ZYXEL_UBOOT) ]; then \
- echo "Warning: $(ZYXEL_UBOOT) not found" >&2; \
- else \
- $(STAGING_DIR_HOST)/bin/mkzynfw \
- -B $(4) \
- -b $(ZYXEL_UBOOT) \
- -r $(call sysupname,$(1),$(2)):0x10000 \
- -o $(call factoryname,$(1),$(2)); \
- fi; fi
-endef
-
-define Image/Build/ZyXELNAND/buildkernel
- $(eval kernelsize=$(call mtdpartsize,kernel,$(5)))
- $(call MkuImageLzma,$(2),$(3) $(5) $(6))
- mkdir -p $(KDIR_TMP)/$(2)/image/boot
- cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR_TMP)/$(2)/image/boot/vmlinux.lzma.uImage
- $(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
- --pad=$(kernelsize) --big-endian --squash-uids -v -e 128KiB \
- -o $(KDIR_TMP)/$(2)-kernel.jffs2 \
- -d $(KDIR_TMP)/$(2)/image \
- 2>&1 1>/dev/null | awk '/^.+$$/'
- -rm -rf $(KDIR_TMP)/$(2)
-endef
-
-define Image/Build/ZyXELNAND
- if [ "$(1)" != "squashfs" ]; then \
- echo Only squashfs is supported; \
- return 0; \
- fi
- $(eval firmwaresize=$(call mtdpartsize,firmware,$(4)))
- $(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
- $(eval imageraw=$(KDIR_TMP)/$(2)-raw.img)
- $(CP) $(KDIR)/root.$(1) $(KDIR_TMP)/ubi_root.img
- $(call ubinize,ubinize-$(2).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5)
- ( \
- dd if=$(KDIR_TMP)/$(2)-kernel.jffs2; \
- dd if=$(KDIR_TMP)/$(2)-root.ubi \
- ) > $(imageraw)
- dd if=$(imageraw) of=$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory.bin \
- bs=128k conv=sync
- $(call Image/Build/SysupgradeNAND,$(2),squashfs,$(KDIR_TMP)/$(2)-kernel.jffs2)
-endef
-
-
-Image/Build/OpenMesh/buildkernel=$(call MkuImageLzma,$(2))
-Image/Build/OpenMesh/initramfs=$(call MkuImageLzma/initramfs,$(2),)
-
-define Image/Build/OpenMesh
- -sh $(TOPDIR)/scripts/om-fwupgradecfg-gen.sh \
- "$(4)" \
- "$(BUILD_DIR)/fwupgrade.cfg-$(4)" \
- "$(KDIR_TMP)/vmlinux-$(2).uImage" \
- "$(KDIR)/root.$(1)"
- -sh $(TOPDIR)/scripts/combined-ext-image.sh \
- "$(4)" "$(call factoryname,$(1),$(2))" \
- "$(BUILD_DIR)/fwupgrade.cfg-$(4)" "fwupgrade.cfg" \
- "$(KDIR_TMP)/vmlinux-$(2).uImage" "kernel" \
- "$(KDIR)/root.$(1)" "rootfs"
- if [ -e "$(call factoryname,$(1),$(2))" ]; then \
- cp "$(call factoryname,$(1),$(2))" "$(call sysupname,$(1),$(2))"; \
- fi
-endef
-
-
-Image/Build/Zcomax/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
-Image/Build/Zcomax/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-
-define Image/Build/Zcomax
- $(call Sysupgrade/RKuImage,$(1),$(2),1507328,6356992)
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- $(STAGING_DIR_HOST)/bin/mkzcfw \
- -B $(2) \
- -k $(KDIR_TMP)/vmlinux-$(2).uImage \
- -r $(KDIR)/root.$(1) \
- -o $(call imgname,$(1),$(2))-factory.img; \
- fi
-endef
-
-
-# $(1): template name to be defined.
-# $(2): squashfs suffix to be used.
-define BuildTemplate
- # $(1) : name of build method.
- # $(2) : board name.
- # $(3) : kernel command line.
- # $(4)~$(8): extra arguments.
- define Image/Build/Template/$(1)/initramfs
- $$(call Image/Build/$$(1)/initramfs,initramfs,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
- endef
- define Image/Build/Template/$(1)/loader
- $$(call Image/Build/$$(1)/loader,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
- endef
- define Image/Build/Template/$(1)/buildkernel
- $$(call Image/Build/$$(1)/buildkernel,,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
- endef
- define Image/Build/Template/$(1)/squashfs
- $$(call Image/Build/$$(1),squashfs$(2),$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
- endef
-endef
-
-$(eval $(call BuildTemplate,squashfs-only))
-$(eval $(call BuildTemplate,64k,-64k))
-$(eval $(call BuildTemplate,64kraw,-raw))
-$(eval $(call BuildTemplate,64kraw-nojffs,-raw))
-$(eval $(call BuildTemplate,128k))
-$(eval $(call BuildTemplate,128kraw,-raw))
-$(eval $(call BuildTemplate,256k))
-$(eval $(call BuildTemplate,all))
-
-ifeq ($(SUBTARGET),generic)
-$(eval $(call SingleProfile,ALFA,64k,ALFANX,alfa-nx,ALFA-NX,ttyS0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,vmlinux.gz.uImage,pb9x-2.6.31-jffs2))
-$(eval $(call SingleProfile,ALFA,64k,HORNETUB,hornet-ub,HORNET-UB,ttyATH0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,kernel_image,rootfs_image))
-$(eval $(call SingleProfile,ALFA,64k,TUBE2H8M,tube2h-8M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,kernel.image,rootfs.image))
-
-$(eval $(call SingleProfile,AthGzip,64k,AP96,ap96,AP96,ttyS0,115200,$$(ap96_mtdlayout),RKuImage))
-$(eval $(call SingleProfile,AthGzip,64k,WNDAP360,wndap360,WNDAP360,ttyS0,9600,$$(wndap360_mtdlayout),KRuImage,65536))
-
-$(eval $(call SingleProfile,AthLzma,64k,ALFAAP120C,alfa-ap120c,ALFA-AP120C,ttyS0,115200,$$(alfa_ap120c_mtdlayout),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,ALFAAP96,alfa-ap96,ALFA-AP96,ttyS0,115200,$$(alfa_ap96_mtdlayout),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,ALL0258N,all0258n,ALL0258N,ttyS0,115200,$$(all0258n_mtdlayout),KRuImage,65536))
-$(eval $(call SingleProfile,AthLzma,256k,ALL0315N,all0315n,ALL0315N,ttyS0,115200,$$(all0315n_mtdlayout),KRuImage,262144))
-$(eval $(call SingleProfile,AthLzma,64k,AP121_8M,ap121-8M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_8M),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,AP121_16M,ap121-16M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_16M),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,AP132,ap132,AP132,ttyS0,115200,$$(ap132_mtdlayout),KRuImage))
-$(eval $(call SingleProfile,AthLzma,64k,AP135,ap135-020,AP135-020,ttyS0,115200,$$(ap135_mtdlayout),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,AP136_010,ap136-010,AP136-010,ttyS0,115200,$$(ap136_mtdlayout),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,AP136_020,ap136-020,AP136-020,ttyS0,115200,$$(ap136_mtdlayout),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,AP143_8M,ap143-8M,AP143,ttyS0,115200,$$(ap143_mtdlayout_8M),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,AP143_16M,ap143-16M,AP143,ttyS0,115200,$$(ap143_mtdlayout_16M),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,AP147_010,ap147-010,AP147-010,ttyS0,115200,$$(ap147_mtdlayout),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,AP152_16M,ap152-16M,AP152,ttyS0,115200,$$(ap152_mtdlayout_16M),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,BXU2000N2,bxu2000n-2-a1,BXU2000n-2-A1,ttyS0,115200,$$(bxu2000n2_mtdlayout),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,CAP4200AG,cap4200ag,CAP4200AG,ttyS0,115200,$$(cap4200ag_mtdlayout),KRuImage))
-$(eval $(call SingleProfile,AthLzma,64k,DB120,db120,DB120,ttyS0,115200,$$(db120_mtdlayout),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,HORNETUBx2,hornet-ub-x2,HORNET-UB,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536))
-$(eval $(call SingleProfile,AthLzma,64k,TUBE2H16M,tube2h-16M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536))
-
-$(eval $(call SingleProfile,Belkin,64k,F9K1115V2,f9k1115v2,F9K1115V2,ttyS0,115200,$$(f9k1115v2_mtdlayout),BR-6679BAC))
-
-$(eval $(call SingleProfile,CameoAP121_8M,64kraw-nojffs,DIR505A1,dir-505-a1,DIR-505-A1,ttyATH0,115200,"HORNET-PACKET-DIR505A1-3",1.99.99,""))
-
-$(eval $(call SingleProfile,CameoAP135,64kraw,DGL5500A1,dgl-5500-a1,DGL-5500-A1,ttyS0,115200,$$(dgl_5500_mtdlayout),"00AP135AR9558-RT-130508-00"))
-$(eval $(call SingleProfile,CameoAP135,64kraw,TEW823DRU,tew-823dru,TEW-823DRU,ttyS0,115200,$$(tew823dru_mtdlayout) mem=256M,"00AP135AR9558-RT-131129-00"))
-
-$(eval $(call SingleProfile,CameoDB120,64kraw,DHP1565A1,dhp-1565-a1,DHP-1565-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
-$(eval $(call SingleProfile,CameoDB120,64kraw,DIR825C1,dir-825-c1,DIR-825-C1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
-$(eval $(call SingleProfile,CameoDB120,64kraw,DIR835A1,dir-835-a1,DIR-835-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
-
-$(eval $(call SingleProfile,CameoDB120_8M,64kraw,TEW732BR,tew-732br,TEW-732BR,ttyS0,115200,"00DB120AR9341-RT-120906-NA"))
-
-$(eval $(call SingleProfile,CyberTANGZIP,64k,E2100L,e2100l,E2100L,ttyS0,115200,,1.00.01))
-$(eval $(call SingleProfile,CyberTANGZIP,64k,WRT160NL,wrt160nl,WRT160NL,ttyS0,115200,,1.00.01))
-
-$(eval $(call SingleProfile,CyberTANLZMA,64k,MYNETREXT,mynet-rext,MYNET-REXT,ttyS0,115200,$$(mynet_rext_mtdlayout) root=31:2,1.00.01))
-
-$(eval $(call SingleProfile,CameoAP94,64kraw,DIR825B1,dir-825-b1,DIR-825-B1,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00))
-$(eval $(call SingleProfile,CameoAP94,64kraw,TEW673GRU,tew-673gru,TEW-673GRU,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-01,00AP94-AR7161-RT-080619-01))
-$(eval $(call SingleProfile,CameoAP94,64kraw,DLRTDEV01,dlrtdev01,DIR-825-B1,ttyS0,115200,$$(dlrtdev_mtdlayout),$$(dlrtdev_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00))
-
-$(eval $(call SingleProfile,dLANLzma,64k,dLAN_Hotspot,dlan-hotspot,dLAN-Hotspot,ttyATH0,115200,$$(dlan_hotspot_mtdlayout) mem=64M,KRuImage,65536))
-$(eval $(call SingleProfile,dLANLzma,64k,dLAN_pro_500_wp,dlan-pro-500-wp,dLAN-pro-500-wp,ttyS0,115200,$$(dlan_pro_500_wp_mtdlayout) mem=128M,KRuImage,65536))
-$(eval $(call SingleProfile,dLANLzma,64k,dLAN_pro_1200_ac,dlan-pro-1200-ac,dLAN-pro-1200-ac,ttyS0,115200,$$(dlan_pro_1200_ac_mtdlayout) mem=128M,KRuImage,65536))
-
-$(eval $(call SingleProfile,EnGenius,64k,ESR900,esr900,ESR900,ttyS0,115200,$$(esr900_mtdlayout),KRuImage,,0x4e))
-$(eval $(call SingleProfile,EnGenius,64k,ESR1750,esr1750,ESR1750,ttyS0,115200,$$(esr1750_mtdlayout),KRuImage,,0x61))
-$(eval $(call SingleProfile,EnGenius,64k,EPG5000,epg5000,EPG5000,ttyS0,115200,$$(epg5000_mtdlayout),KRuImage,,0x71))
-
-$(eval $(call SingleProfile,MyLoader,64k,WP543_8M,wp543,,ttyS0,115200,0x800000,8M))
-$(eval $(call SingleProfile,MyLoader,64k,WP543_16M,wp543,,ttyS0,115200,0x1000000,16M))
-$(eval $(call SingleProfile,MyLoader,64k,WPE72_8M,wpe72,,ttyS0,115200,0x800000,8M))
-$(eval $(call SingleProfile,MyLoader,64k,WPE72_16M,wpe72,,ttyS0,115200,0x1000000,16M))
-
-$(eval $(call SingleProfile,Netgear,64kraw,WNR2200,wnr2200,WNR2200,ttyS0,115200,$$(wnr2200_mtdlayout),0x32323030,wnr2200,"" NA,))
-
-$(eval $(call SingleProfile,OpenMesh,squashfs-only,A60,a60,,,,A60))
-$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM2P,om2p,,,,OM2P))
-$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM5P,om5p,,,,OM5P))
-$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM5PAC,om5pac,,,,OM5PAC))
-$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR600,mr600,,,,MR600))
-$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR900,mr900,,,,MR900))
-$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR1750,mr1750,,,,MR1750))
-
-$(eval $(call SingleProfile,PB4X,128k,ALL0305,all0305,ALL0305,ttyS0,115200))
-$(eval $(call SingleProfile,PB4X,128k,EAP7660D,eap7660d,EAP7660D,ttyS0,115200))
-$(eval $(call SingleProfile,PB4X,64k,JA76PF,ja76pf,JA76PF,ttyS0,115200))
-$(eval $(call SingleProfile,PB4X,64k,JA76PF2,ja76pf2,JA76PF2,ttyS0,115200))
-$(eval $(call SingleProfile,PB4X,64k,JWAP003,jwap003,JWAP003,ttyS0,115200))
-$(eval $(call SingleProfile,PB4X,64k,PB42,pb42,PB42,ttyS0,115200))
-$(eval $(call SingleProfile,PB4X,64k,PB44,pb44,PB44,ttyS0,115200))
-
-$(eval $(call SingleProfile,Planex,64kraw,MZKW04NU,mzk-w04nu,MZK-W04NU,ttyS0,115200))
-$(eval $(call SingleProfile,Planex,64kraw,MZKW300NH,mzk-w300nh,MZK-W300NH,ttyS0,115200))
-
-$(eval $(call SingleProfile,Senao,squashfs-only,EAP300V2,eap300v2,EAP300V2,ttyS0,115200,$$(eap300v2_mtdlayout)))
-
-$(eval $(call SingleProfile,WRT400N,64k,WRT400N,wrt400n,WRT400N,ttyS0,115200))
-
-$(eval $(call SingleProfile,WZRHP128K,128kraw,WZRHPG300NH,wzr-hp-g300nh,WZR-HP-G300NH,ttyS0,115200,WZR-HP-G300NH))
-$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPG300NH2,wzr-hp-g300nh2,WZR-HP-G300NH2,ttyS0,115200,WZR-HP-G300NH2))
-$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPAG300H,wzr-hp-ag300h,WZR-HP-AG300H,ttyS0,115200,WZR-HP-AG300H))
-$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPG450H,wzr-hp-g450h,WZR-HP-G450H,ttyS0,115200,WZR-HP-AG450H))
-$(eval $(call SingleProfile,WZRHP64K,64kraw,WZR600DHP,wzr-600dhp,WZR-HP-AG300H,ttyS0,115200,WZR-600DHP))
-$(eval $(call SingleProfile,WZRHP64K,64kraw,WZR450HP2,wzr-450hp2,WZR-450HP2,ttyS0,115200,WZR-450HP2))
-
-$(eval $(call SingleProfile,Zcomax,64k,ZCN1523H28,zcn-1523h-2-8,ZCN-1523H-2,ttyS0,115200,$$(zcn1523h_mtdlayout)))
-$(eval $(call SingleProfile,Zcomax,64k,ZCN1523H516,zcn-1523h-5-16,ZCN-1523H-5,ttyS0,115200,$$(zcn1523h_mtdlayout)))
-
-endif # ifeq ($(SUBTARGET),generic)
-
-
-ifeq ($(SUBTARGET),tiny)
-
-$(eval $(call SingleProfile,CameoAP91,64kraw,DIR600A1,dir-600-a1,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-00"))
-$(eval $(call SingleProfile,CameoAP91,64kraw,DIR601A1,dir-601-a1,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-02"))
-$(eval $(call SingleProfile,CameoAP91,64kraw,FR54RTR,fr-54rtr,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-01"))
-
-$(eval $(call SingleProfile,CameoAP99,64kraw,EBR2310C1,ebr-2310-c1,EBR-2310-C1,ttyS0,115200,"AP91-AR7240-RT-090223-03"))
-$(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E1,dir-615-e1,DIR-615-E1,ttyS0,115200,"AP93-AR7240-RT-081028-00"))
-$(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E4,dir-615-e4,DIR-615-E4,ttyS0,115200,"AP99-AR7240-RT-091105-05"))
-
-$(eval $(call SingleProfile,CameoAP123_4M,64kraw,DIR615I1,dir-615-i1,DIR-615-I1,ttyS0,115200,"00DB120AR9341-RT-1012I1-00"))
-$(eval $(call SingleProfile,CameoAP123_4M,64kraw,DIR615I3,dir-615-i3,DIR-615-I1,ttyS0,115200,"00DB120AR9341-RT-101214-00"))
-
-$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,A02RBW300N,a02-rb-w300n,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-03"))
-$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,DIR615C1,dir-615-c1,DIR-615-C1,ttyS0,115200,"AP81-AR9130-RT-070614-02"))
-$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW632BRP,tew-632brp,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-00"))
-$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW652BRP_FW,tew-652brp,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-080609-05"))
-$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW652BRP_RECOVERY,tew-652brp-recovery,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-02"))
-
-$(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,TEW712BR,tew-712br,TEW-712BR,ttyATH0,115200,"HORNET-RT-TEW712BR-3",1.99,""))
-$(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,DIR601B1,dir-601-b1,TEW-712BR,ttyATH0,115200,"HORNET-RT-DIR601B1-3",2.99.99,"" "NA"))
-
-$(eval $(call SingleProfile,MyLoader,64k,WP543_4M,wp543,,ttyS0,115200,0x400000,4M))
-$(eval $(call SingleProfile,MyLoader,64k,WPE72_4M,wpe72,,ttyS0,115200,0x400000,4M))
-
-$(eval $(call SingleProfile,Netgear,64kraw,WNR2000V3,wnr2000v3,WNR2000V3,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303033,WNR2000V3,"" NA,-H 29763551+04+32))
-$(eval $(call SingleProfile,NetgearLzma,64kraw,WNR2000V4,wnr2000v4,WNR2000V4,ttyS0,115200,$$(wnr2000v4_mtdlayout),0x32303034,WNR2000V4,"" NA,))
-$(eval $(call SingleProfile,Netgear,64kraw,WNR2000,wnr2000,WNR2000,ttyS0,115200,$$(wnr2000_mtdlayout),0x32303031,WNR2000,"" NA,))
-$(eval $(call SingleProfile,Netgear,64kraw,REALWNR612V2,wnr612v2,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,WNR612V2,"",))
-$(eval $(call SingleProfile,Netgear,64kraw,N150R,n150r,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,N150R,"",))
-$(eval $(call SingleProfile,Netgear,64kraw,REALWNR1000V2,wnr1000v2,WNR1000V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31303031,WNR1000V2,"",))
-$(eval $(call SingleProfile,Netgear,64kraw,WNR1000V2_VC,wnr1000v2-vc,WNR1000V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31303030,WNR1000V2-VC,"",))
-$(eval $(call SingleProfile,Netgear,64kraw,WPN824N,wpn824n,WPN824N,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31313030,WPN824N,"" NA,))
-
-$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRG301N,whr-g301n,WHR-G301N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-G301N))
-$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPG300N,whr-hp-g300n,WHR-HP-G300N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-G300N))
-$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPGN,whr-hp-gn,WHR-HP-GN,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-GN))
-$(eval $(call SingleProfile,WHRHPG300N,64kraw,WLAEAG300N,wlae-ag300n,WLAE-AG300N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WLAE-AG300N))
-
-$(eval $(call SingleProfile,ZyXEL,64k,NBG_460N_550N_550NH,nbg460n_550n_550nh,NBG460N,ttyS0,115200,NBG-460N))
-
-endif # ifeq ($(SUBTARGET),tiny)
-
-
-ifeq ($(SUBTARGET),nand)
-
-$(eval $(call SingleProfile,NetgearNAND,64k,WNDR3700V4,wndr3700v4,WNDR3700_V4,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR3700v4,"",-H 29763948+128+128,wndr4300))
-$(eval $(call SingleProfile,NetgearNAND,64k,WNDR4300V1,wndr4300,WNDR4300,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR4300,"",-H 29763948+0+128+128+2x2+3x3,wndr4300))
-$(eval $(call SingleProfile,NetgearNAND,64k,R6100,r6100,R6100,ttyS0,115200,$$(r6100_mtdlayout),0x36303030,R6100,"",-H 29764434+0+128+128+2x2+2x2,wndr4300))
-
-$(eval $(call SingleProfile,ZyXELNAND,128k,NBG6716,nbg6716,NBG6716,ttyS0,115200,NBG6716,$$(zyx_nbg6716_mtdlayout),mem=256M))
-
-endif # ifeq ($(SUBTARGET),nand)
-
-define Image/Build/squashfs
- cp $(KDIR)/root.squashfs $(KDIR)/root.squashfs-raw
- cp $(KDIR)/root.squashfs $(KDIR)/root.squashfs-64k
- $(STAGING_DIR_HOST)/bin/padjffs2 $(KDIR)/root.squashfs-64k 64
- $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
- dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
-endef
-
-define Image/Prepare
- $(if $(wildcard $(ZYXEL_UBOOT_BIN)),cp $(ZYXEL_UBOOT_BIN) $(ZYXEL_UBOOT))
- $(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma)
-ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
- $(call CompressLzma,$(KDIR)/vmlinux-initramfs,$(KDIR)/vmlinux-initramfs.bin.lzma)
- $(call Image/BuildLoader,generic,elf,,,-initramfs)
-endif
- $(call Image/BuildLoader,generic,elf)
-endef
-
-define Image/Prepare/Profile
- $(call Image/Build/Profile/$(1),loader)
-endef
-
-define Image/Build/Profile
- $(call Image/Build/Profile/$(1),buildkernel)
- $(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),$(call Image/Build/Profile/$(1),initramfs))
- $(call Image/Build/Profile/$(1),$(2))
-endef
-
-# $(1): filesystem type.
-define Image/Build
- $(call Image/Build/$(call rootfs_type,$(1)),$(1))
-endef
More information about the lede-commits
mailing list