[openwrt/openwrt] mvebu: add support for WRT32X (venom)
LEDE Commits
lede-commits at lists.infradead.org
Mon May 14 08:20:41 PDT 2018
blogic pushed a commit to openwrt/openwrt.git, branch master:
https://git.lede-project.org/bfbdeeb3de3da31f7e5f9bd429e079c2d839644a
commit bfbdeeb3de3da31f7e5f9bd429e079c2d839644a
Author: Michael Gray <michael.gray at lantisproject.com>
AuthorDate: Sun May 13 23:29:30 2018 +1000
mvebu: add support for WRT32X (venom)
Linksys WRT32X (Venom) is identical in hardware to the WRT3200ACM
with a different flash layout and boots zImage rather than uImage.
Specification:
- Marvell Armada 385 88F6820 (2x 1.8GHz)
- 256MB of Flash
- 512MB of RAM
- 2.4GHz (bgn) and 5GHz (an+ac wave 2)
- 4x 1Gbps LAN + 1x 1Gbps WAN
- 1x USB 3.0 and 1x USB 2.0/eSATA (combo port)
Flash instruction:
Apply factory image via web-gui.
Signed-off-by: Michael Gray <michael.gray at lantisproject.com>
---
package/boot/uboot-envtools/files/mvebu | 3 +-
target/linux/mvebu/base-files/etc/board.d/01_leds | 6 +
.../linux/mvebu/base-files/etc/board.d/02_network | 1 +
target/linux/mvebu/base-files/etc/diag.sh | 3 +
.../mvebu/base-files/etc/init.d/linksys_recovery | 2 +-
.../mvebu/base-files/etc/uci-defaults/03_wireless | 2 +-
target/linux/mvebu/base-files/lib/mvebu.sh | 3 +
.../mvebu/base-files/lib/preinit/06_set_iface_mac | 2 +-
.../mvebu/base-files/lib/preinit/81_linksys_syscfg | 2 +-
.../linux/mvebu/base-files/lib/upgrade/linksys.sh | 2 +-
.../linux/mvebu/base-files/lib/upgrade/platform.sh | 4 +-
.../arch/arm/boot/dts/armada-385-linksys-venom.dts | 201 +++++++++++++++++++++
target/linux/mvebu/image/cortex-a9.mk | 10 +
.../mvebu/patches-4.14/105-build_new_dtbs.patch | 10 +
14 files changed, 243 insertions(+), 8 deletions(-)
diff --git a/package/boot/uboot-envtools/files/mvebu b/package/boot/uboot-envtools/files/mvebu
index ea9f136..7d16a59 100644
--- a/package/boot/uboot-envtools/files/mvebu
+++ b/package/boot/uboot-envtools/files/mvebu
@@ -19,7 +19,8 @@ armada-385-linksys-cobra|\
armada-385-linksys-shelby)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x40000"
;;
-armada-385-linksys-rango)
+armada-385-linksys-rango|\
+armada-385-linksys-venom)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
;;
armada-385-turris-omnia)
diff --git a/target/linux/mvebu/base-files/etc/board.d/01_leds b/target/linux/mvebu/base-files/etc/board.d/01_leds
index 8451990..ff8d4a2 100755
--- a/target/linux/mvebu/base-files/etc/board.d/01_leds
+++ b/target/linux/mvebu/base-files/etc/board.d/01_leds
@@ -35,6 +35,12 @@ armada-385-linksys-shelby)
ucidef_set_led_usbport "usb2" "USB 2" "pca963x:shelby:white:usb3_1" "usb2-port1" "usb3-port1"
ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "pca963x:shelby:white:usb3_2" "usb3-port1"
;;
+armada-385-linksys-venom)
+ ucidef_set_led_netdev "wan" "WAN" "pca963x:venom:blue:wan" "eth1"
+ ucidef_set_led_usbport "usb1" "USB 1" "pca963x:venom:blue:usb2" "usb1-port1"
+ ucidef_set_led_usbport "usb2" "USB 2" "pca963x:venom:blue:usb3_1" "usb2-port1" "usb3-port1"
+ ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "pca963x:venom:blue:usb3_2" "usb3-port1"
+ ;;
armada-xp-linksys-mamba)
ucidef_set_led_netdev "wan" "WAN" "mamba:white:wan" "eth1"
ucidef_set_led_usbport "usb1" "USB 1" "mamba:white:usb2" "usb1-port1"
diff --git a/target/linux/mvebu/base-files/etc/board.d/02_network b/target/linux/mvebu/base-files/etc/board.d/02_network
index 8e57e8e..66d35dd 100755
--- a/target/linux/mvebu/base-files/etc/board.d/02_network
+++ b/target/linux/mvebu/base-files/etc/board.d/02_network
@@ -18,6 +18,7 @@ armada-385-linksys-caiman|\
armada-385-linksys-cobra|\
armada-385-linksys-rango|\
armada-385-linksys-shelby|\
+armada-385-linksys-venom|\
armada-xp-linksys-mamba)
ucidef_set_interfaces_lan_wan "eth0.1" "eth1.2"
ucidef_add_switch "switch0" \
diff --git a/target/linux/mvebu/base-files/etc/diag.sh b/target/linux/mvebu/base-files/etc/diag.sh
index 4a3f54e..327a82d 100644
--- a/target/linux/mvebu/base-files/etc/diag.sh
+++ b/target/linux/mvebu/base-files/etc/diag.sh
@@ -19,6 +19,9 @@ get_status_led() {
armada-385-linksys-shelby)
status_led="shelby:white:power"
;;
+ armada-385-linksys-venom)
+ status_led="venom:blue:power"
+ ;;
armada-xp-linksys-mamba)
status_led="mamba:white:power"
;;
diff --git a/target/linux/mvebu/base-files/etc/init.d/linksys_recovery b/target/linux/mvebu/base-files/etc/init.d/linksys_recovery
index c1532ac..520b8aa 100755
--- a/target/linux/mvebu/base-files/etc/init.d/linksys_recovery
+++ b/target/linux/mvebu/base-files/etc/init.d/linksys_recovery
@@ -7,7 +7,7 @@ boot() {
. /lib/functions.sh
case $(board_name) in
- armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-xp-linksys-mamba)
+ armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-385-linksys-venom|armada-xp-linksys-mamba)
# make sure auto_recovery in uboot is always on
AUTO_RECOVERY_ENA="`fw_printenv -n auto_recovery`"
if [ "$AUTO_RECOVERY_ENA" != "yes" ] ; then
diff --git a/target/linux/mvebu/base-files/etc/uci-defaults/03_wireless b/target/linux/mvebu/base-files/etc/uci-defaults/03_wireless
index baf4a20..6fb24c8 100644
--- a/target/linux/mvebu/base-files/etc/uci-defaults/03_wireless
+++ b/target/linux/mvebu/base-files/etc/uci-defaults/03_wireless
@@ -11,7 +11,7 @@
board=$(board_name)
case "$board" in
-armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-shelby|armada-xp-linksys-mamba)
+armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-shelby|armada-385-linksys-venom|armada-xp-linksys-mamba)
SKU=$(strings /dev/mtd3|sed -ne 's/^cert_region=//p')
WIFIMAC2G=$(macaddr_add $(cat /sys/class/net/eth0/address) +1)
WIFIMAC5G=$(macaddr_add $WIFIMAC2G +1)
diff --git a/target/linux/mvebu/base-files/lib/mvebu.sh b/target/linux/mvebu/base-files/lib/mvebu.sh
index 840cc1c..33ac832 100755
--- a/target/linux/mvebu/base-files/lib/mvebu.sh
+++ b/target/linux/mvebu/base-files/lib/mvebu.sh
@@ -53,6 +53,9 @@ mvebu_board_detect() {
*"Linksys WRT3200ACM")
name="armada-385-linksys-rango"
;;
+ *"Linksys WRT32X")
+ name="armada-385-linksys-venom"
+ ;;
*"Marvell Armada 385 Access Point Development Board")
name="armada-385-db-ap"
;;
diff --git a/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac b/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac
index b56cbf5..534a271 100644
--- a/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac
@@ -14,7 +14,7 @@ preinit_set_mac_address() {
ip link set dev eth0 address $mac 2>/dev/null
ip link set dev eth1 address $mac 2>/dev/null
;;
- armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby)
+ armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-385-linksys-venom)
# rename interfaces back to the way they were with 4.4
case "$(readlink /sys/class/net/eth0)" in
*f1070000*)
diff --git a/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg b/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg
index c55c1f5..cf7a22c 100644
--- a/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg
+++ b/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg
@@ -8,7 +8,7 @@ preinit_mount_syscfg() {
. /lib/functions.sh
case $(board_name) in
- armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-xp-linksys-mamba)
+ armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-385-linksys-venom|armada-xp-linksys-mamba)
needs_recovery=0
syscfg_part=$(grep syscfg /proc/mtd |cut -c4)
ubiattach -m $syscfg_part || needs_recovery=1
diff --git a/target/linux/mvebu/base-files/lib/upgrade/linksys.sh b/target/linux/mvebu/base-files/lib/upgrade/linksys.sh
index 63d1cd1..aacaf55 100644
--- a/target/linux/mvebu/base-files/lib/upgrade/linksys.sh
+++ b/target/linux/mvebu/base-files/lib/upgrade/linksys.sh
@@ -55,7 +55,7 @@ platform_do_upgrade_linksys() {
nand_upgrade_tar "$1"
}
- [ "$magic_long" = "27051956" ] && {
+ [ "$magic_long" = "27051956" -o "$magic_long" = "0000a0e1" ] && {
# check firmwares' rootfs types
local target_mtd=$(find_mtd_part $part_label)
local oldroot="$(linksys_get_root_magic $target_mtd)"
diff --git a/target/linux/mvebu/base-files/lib/upgrade/platform.sh b/target/linux/mvebu/base-files/lib/upgrade/platform.sh
index 15c5433..e4ccf9d 100755
--- a/target/linux/mvebu/base-files/lib/upgrade/platform.sh
+++ b/target/linux/mvebu/base-files/lib/upgrade/platform.sh
@@ -13,7 +13,7 @@ platform_check_image() {
platform_do_upgrade() {
case "$(board_name)" in
- armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-xp-linksys-mamba)
+ armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-385-linksys-venom|armada-xp-linksys-mamba)
platform_do_upgrade_linksys "$ARGV"
;;
armada-385-turris-omnia|armada-388-clearfog-base|armada-388-clearfog-pro|globalscale,espressobin|marvell,armada8040-mcbin)
@@ -26,7 +26,7 @@ platform_do_upgrade() {
}
platform_copy_config() {
case "$(board_name)" in
- armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-xp-linksys-mamba)
+ armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-385-linksys-venom|armada-xp-linksys-mamba)
platform_copy_config_linksys
;;
armada-385-turris-omnia|armada-388-clearfog-base|armada-388-clearfog-pro|globalscale,espressobin|marvell,armada8040-mcbin)
diff --git a/target/linux/mvebu/files-4.14/arch/arm/boot/dts/armada-385-linksys-venom.dts b/target/linux/mvebu/files-4.14/arch/arm/boot/dts/armada-385-linksys-venom.dts
new file mode 100644
index 0000000..ea44c8f
--- /dev/null
+++ b/target/linux/mvebu/files-4.14/arch/arm/boot/dts/armada-385-linksys-venom.dts
@@ -0,0 +1,201 @@
+/*
+ * Device Tree file for the Linksys WRT32X (Venom)
+ *
+ * Copyright (C) 2017 Imre Kaloz <kaloz at openwrt.org>
+ *
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-385-linksys.dtsi"
+
+/ {
+ model = "Linksys WRT32X";
+ compatible = "linksys,venom", "linksys,armada385", "marvell,armada385",
+ "marvell,armada380";
+ };
+
+ &expander0 {
+ wan_amber at 0 {
+ label = "venom:amber:wan";
+ reg = <0x0>;
+ };
+
+ wan_blue at 1 {
+ label = "venom:blue:wan";
+ reg = <0x1>;
+ };
+
+ usb2 at 5 {
+ label = "venom:blue:usb2";
+ reg = <0x5>;
+ };
+
+ usb3_1 at 6 {
+ label = "venom:blue:usb3_1";
+ reg = <0x6>;
+ };
+
+ usb3_2 at 7 {
+ label = "venom:blue:usb3_2";
+ reg = <0x7>;
+ };
+
+ wps_blue at 8 {
+ label = "venom:blue:wps";
+ reg = <0x8>;
+ };
+
+ wps_amber at 9 {
+ label = "venom:amber:wps";
+ reg = <0x9>;
+ };
+ };
+
+ &gpio_leds {
+ power {
+ gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+ label = "venom:blue:power";
+ };
+
+ sata {
+ gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+ label = "venom:blue:sata";
+ };
+
+ wlan_2g {
+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ label = "venom:blue:wlan_2g";
+ };
+
+ wlan_5g {
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ label = "venom:blue:wlan_5g";
+ };
+ };
+
+ &gpio_leds_pins {
+ marvell,pins = "mpp21", "mpp45", "mpp46", "mpp56";
+ };
+
+ &nand {
+ /* Spansion S34ML02G2 256MiB, OEM Layout */
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0000000 0x200000>; /* 2MB */
+ read-only;
+ };
+
+ partition at 200000 {
+ label = "u_env";
+ reg = <0x200000 0x20000>; /* 128KB */
+ };
+
+ partition at 220000 {
+ label = "s_env";
+ reg = <0x220000 0x40000>; /* 256KB */
+ };
+
+ partition at 180000 {
+ label = "unused_area";
+ reg = <0x260000 0x5c0000>; /* 5.75MB */
+ };
+
+ partition at 7e0000 {
+ label = "devinfo";
+ reg = <0x7e0000 0x40000>; /* 256KB */
+ read-only;
+ };
+
+ /* kernel1 overlaps with rootfs1 by design */
+ partition at 900000 {
+ label = "kernel1";
+ reg = <0x900000 0x7b00000>; /* 123MB */
+ };
+
+ partition at c00000 {
+ label = "rootfs1";
+ reg = <0xc00000 0x7800000>; /* 120MB */
+ };
+
+ /* kernel2 overlaps with rootfs2 by design */
+ partition at 8400000 {
+ label = "kernel2";
+ reg = <0x8400000 0x7b00000>; /* 123MB */
+ };
+
+ partition at 8700000 {
+ label = "rootfs2";
+ reg = <0x8700000 0x7800000>; /* 120MB */
+ };
+
+ /* last MB is for the BBT, not writable */
+ partition at ff00000 {
+ label = "BBT";
+ reg = <0xff00000 0x100000>;
+ };
+ };
+
+
+ &pcie1 {
+ mwlwifi {
+ marvell,chainmask = <4 4>;
+ };
+ };
+
+ &pcie2 {
+ mwlwifi {
+ marvell,chainmask = <4 4>;
+ };
+ };
+
+ &sdhci {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhci_pins>;
+ no-1-8-v;
+ non-removable;
+ wp-inverted;
+ bus-width = <8>;
+ status = "okay";
+ };
+
+ &usb3_1_vbus {
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ &usb3_1_vbus_pins {
+ marvell,pins = "mpp44";
+ };
diff --git a/target/linux/mvebu/image/cortex-a9.mk b/target/linux/mvebu/image/cortex-a9.mk
index d9defe8..6bc6269 100644
--- a/target/linux/mvebu/image/cortex-a9.mk
+++ b/target/linux/mvebu/image/cortex-a9.mk
@@ -51,6 +51,16 @@ define Device/linksys-wrt1900acs
endef
TARGET_DEVICES += linksys-wrt1900acs
+define Device/linksys-wrt32x
+$(call Device/linksys,WRT32X (Venom))
+ DEVICE_DTS := armada-385-linksys-venom
+ DEVICE_PACKAGES += kmod-btmrvl kmod-mwifiex-sdio mwlwifi-firmware-88w8964
+ $(Device/armada-385-linksys)
+ KERNEL_SIZE := 3072k
+ KERNEL := kernel-bin | append-dtb
+endef
+TARGET_DEVICES += linksys-wrt32x
+
define Device/linksys-wrt1900ac
$(call Device/linksys,WRT1900AC (Mamba))
DEVICE_DTS := armada-xp-linksys-mamba
diff --git a/target/linux/mvebu/patches-4.14/105-build_new_dtbs.patch b/target/linux/mvebu/patches-4.14/105-build_new_dtbs.patch
new file mode 100644
index 0000000..92880b9
--- /dev/null
+++ b/target/linux/mvebu/patches-4.14/105-build_new_dtbs.patch
@@ -0,0 +1,10 @@
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -1027,6 +1027,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
+ armada-385-linksys-cobra.dtb \
+ armada-385-linksys-rango.dtb \
+ armada-385-linksys-shelby.dtb \
++ armada-385-linksys-venom.dtb \
+ armada-385-synology-ds116.dtb \
+ armada-385-turris-omnia.dtb \
+ armada-388-clearfog.dtb \
More information about the lede-commits
mailing list