[openwrt/openwrt] at91: Add SAMA5D27 SOM1 EK board
LEDE Commits
lede-commits at lists.infradead.org
Fri May 4 23:26:13 PDT 2018
blogic pushed a commit to openwrt/openwrt.git, branch master:
https://git.lede-project.org/22c398d2576b97b5afc67d6802528dc9eceb4d8a
commit 22c398d2576b97b5afc67d6802528dc9eceb4d8a
Author: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun at microchip.com>
AuthorDate: Fri May 4 10:27:47 2018 -0700
at91: Add SAMA5D27 SOM1 EK board
Add support for SAMA5D27 SOM1 with target device as at91-sama5d27_som1_ek
in SAMA5 subtarget and build images for SAMA5D27 SOM1 Ek board.
Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun at microchip.com>
---
package/boot/at91bootstrap/Makefile | 19 +-
package/boot/uboot-at91/Makefile | 16 +-
target/linux/at91/base-files/lib/at91.sh | 3 +
target/linux/at91/image/sama5.mk | 18 +-
...4-ARM-at91-build-dtb-for-sama5d27-SOM1-Ek.patch | 908 +++++++++++++++++++++
5 files changed, 957 insertions(+), 7 deletions(-)
diff --git a/package/boot/at91bootstrap/Makefile b/package/boot/at91bootstrap/Makefile
index 8a1ec5e..fbe44c4 100644
--- a/package/boot/at91bootstrap/Makefile
+++ b/package/boot/at91bootstrap/Makefile
@@ -69,6 +69,21 @@ define AT91Bootstrap/sama5d4_xplainedsd_uboot_secure
BUILD_DEVICES:=at91-sama5d4_xplained
endef
+define AT91Bootstrap/sama5d27_som1_eksd_uboot
+ TITLE:=AT91Bootstrap for SAMA5D27 SOM1 Ek (SDcard0)
+ BUILD_DEVICES:=at91-sama5d27_som1_ek
+endef
+
+define AT91Bootstrap/sama5d27_som1_eksd1_uboot
+ TITLE:=AT91Bootstrap for SAMA5D27 SOM1 Ek (SDcard1)
+ BUILD_DEVICES:=at91-sama5d27_som1_ek
+endef
+
+define AT91Bootstrap/sama5d27_som1_ekqspi_uboot
+ TITLE:=AT91Bootstrap for SAMA5D27 SOM1 Ek (QSPI Flash)
+ BUILD_DEVICES:=at91-sama5d27_som1_ek
+endef
+
AT91BOOTSTRAP_TARGETS := \
sama5d2_xplaineddf_uboot \
sama5d2_xplaineddf_qspi_uboot \
@@ -77,7 +92,9 @@ AT91BOOTSTRAP_TARGETS := \
sama5d3_xplainedsd_uboot \
sama5d4_xplainednf_uboot_secure \
sama5d4_xplaineddf_uboot_secure \
- sama5d4_xplainedsd_uboot_secure
+ sama5d4_xplainedsd_uboot_secure \
+ sama5d27_som1_eksd_uboot \
+ sama5d27_som1_ekqspi_uboot
define Build/Compile
+$(MAKE) $(PKG_JOBS) -C $(PKG_BUILD_DIR) \
diff --git a/package/boot/uboot-at91/Makefile b/package/boot/uboot-at91/Makefile
index 27b113e..994201e 100644
--- a/package/boot/uboot-at91/Makefile
+++ b/package/boot/uboot-at91/Makefile
@@ -79,6 +79,18 @@ define U-Boot/sama5d4_xplained_nandflash
BUILD_DEVICES:=at91-sama5d4_xplained
endef
+define U-Boot/sama5d27_som1_ek_mmc
+ NAME:=SAMA5D27 SOM1 Ek (SDCard)
+ BUILD_SUBTARGET:=sama5
+ BUILD_DEVICES:=at91-sama5d27_som1_ek
+endef
+
+define U-Boot/sama5d27_som1_ek_spiflash
+ NAME:=SAMA5D27 SOM1 Ek (QSPI Flash)
+ BUILD_SUBTARGET:=sama5
+ BUILD_DEVICES:=at91-sama5d27_som1_ek
+endef
+
UBOOT_TARGETS := \
at91sam9m10g45ek_nandflash \
at91sam9x5ek_nandflash \
@@ -88,7 +100,9 @@ UBOOT_TARGETS := \
sama5d2_xplained_spiflash \
sama5d4_xplained_mmc \
sama5d4_xplained_spiflash \
- sama5d4_xplained_nandflash
+ sama5d4_xplained_nandflash\
+ sama5d27_som1_ek_mmc \
+ sama5d27_som1_ek_spiflash
define Build/Compile
+$(MAKE) $(PKG_JOBS) -C $(PKG_BUILD_DIR) \
diff --git a/target/linux/at91/base-files/lib/at91.sh b/target/linux/at91/base-files/lib/at91.sh
index 61921ed..5d31b67 100755
--- a/target/linux/at91/base-files/lib/at91.sh
+++ b/target/linux/at91/base-files/lib/at91.sh
@@ -43,6 +43,9 @@ at91_board_detect() {
*"SAMA5D3 Xplained")
name="sama5d3_xplained"
;;
+ *"Atmel SAMA5D27 SOM1 EK")
+ name="sama5d27_som1_ek"
+ ;;
*"SAMA5D2 Xplained")
name="sama5d2_xplained"
;;
diff --git a/target/linux/at91/image/sama5.mk b/target/linux/at91/image/sama5.mk
index b875888..5960f40 100644
--- a/target/linux/at91/image/sama5.mk
+++ b/target/linux/at91/image/sama5.mk
@@ -11,15 +11,15 @@ define Build/at91-sdcard
$(foreach dts,$(DEVICE_DTS), \
mcopy -i $@.boot $(DTS_DIR)/$(dts).dtb \
- ::$(dts).dtb;)
+ ::$(dts).dtb)
mcopy -i $@.boot \
$(BIN_DIR)/u-boot-$(DEVICE_NAME:at91-%=%)_mmc/u-boot.bin \
::u-boot.bin
- $(CP) $(BIN_DIR)/at91bootstrap-$(DEVICE_NAME:at91-%=%)sd*/at91bootstrap.bin \
- $@.BOOT.bin; \
- mcopy -i $@.boot $@.BOOT.bin ::BOOT.bin
+ mcopy -i $@.boot \
+ $(BIN_DIR)/at91bootstrap-$(DEVICE_NAME:at91-%=%)sd*/at91bootstrap.bin \
+ ::BOOT.bin
./gen_at91_sdcard_img.sh \
$@.img \
@@ -30,7 +30,7 @@ define Build/at91-sdcard
gzip -nc9 $@.img > $@
- rm -f $@.img $@.boot $@.BOOT.bin
+ rm -f $@.img $@.boot
endef
define Device/evaluation-sdimage
@@ -73,6 +73,14 @@ define Device/at91-sama5d4_xplained
endef
TARGET_DEVICES += at91-sama5d4_xplained
+define Device/at91-sama5d27_som1_ek
+ $(Device/evaluation-dtb)
+ DEVICE_TITLE := Microchip(Atmel AT91) SAMA5D27 SOM1 Ek
+ KERNEL_SIZE := 6144k
+ $(Device/evaluation-sdimage)
+endef
+TARGET_DEVICES += at91-sama5d27_som1_ek
+
ifeq ($(strip $(CONFIG_EXTERNAL_KERNEL_TREE)),"")
ifeq ($(strip $(CONFIG_KERNEL_GIT_CLONE_URI)),"")
define Device/wb50n
diff --git a/target/linux/at91/patches-4.9/104-ARM-at91-build-dtb-for-sama5d27-SOM1-Ek.patch b/target/linux/at91/patches-4.9/104-ARM-at91-build-dtb-for-sama5d27-SOM1-Ek.patch
new file mode 100644
index 0000000..1a3945e
--- /dev/null
+++ b/target/linux/at91/patches-4.9/104-ARM-at91-build-dtb-for-sama5d27-SOM1-Ek.patch
@@ -0,0 +1,908 @@
+diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
+index 61ac757..9820227 100644
+--- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
++++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
+@@ -35,7 +35,12 @@ right representation of the pin.
+ Optional properties:
+ - GENERIC_PINCONFIG: generic pinconfig options to use, bias-disable,
+ bias-pull-down, bias-pull-up, drive-open-drain, input-schmitt-enable,
+-input-debounce, output-low, output-high.
++input-debounce, output-low, output-high, drive-strength.
++
++Concerning the drive-strength property, the values accepted are
++ATMEL_PIO_DRVSTR_LO, ATMEL_PIO_DRVSTR_ME, ATMEL_PIO_DRVSTR_HI. The current
++depends on VDDIOP. You can find the details in the DC Characteristics table
++from the datasheet.
+
+ Example:
+
+diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index 1218005..c88e426 100644
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -49,6 +49,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
+ wb45n.dtb
+ dtb-$(CONFIG_SOC_SAM_V7) += \
+ at91-kizbox2.dtb \
++ at91-sama5d27_som1_ek.dtb \
+ at91-sama5d2_xplained.dtb \
+ at91-sama5d3_xplained.dtb \
+ sama5d31ek.dtb \
+diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
+new file mode 100644
+index 0000000..7d7575f
+--- /dev/null
++++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
+@@ -0,0 +1,175 @@
++/*
++ * at91-sama5d27_som1.dtsi - Device Tree file for SAMA5D27 SoM1 board
++ *
++ * Copyright (c) 2017, Microchip Technology Inc.
++ * 2017 Cristian Birsan <cristian.birsan at microchip.com>
++ * 2017 Claudiu Beznea <claudiu.beznea at microchip.com>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This file is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++#include "sama5d2.dtsi"
++#include "sama5d2-pinfunc.h"
++
++/ {
++ model = "Atmel SAMA5D27 SoM1";
++ compatible = "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
++
++ clocks {
++ slow_xtal {
++ clock-frequency = <32768>;
++ };
++
++ main_xtal {
++ clock-frequency = <24000000>;
++ };
++ };
++
++ ahb {
++ apb {
++ qspi1: spi at f0024000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_qspi1_default>;
++
++ flash at 0 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "jedec,spi-nor";
++ reg = <0>;
++ spi-max-frequency = <80000000>;
++ m25p,fast-read;
++
++ at91bootstrap at 00000000 {
++ label = "at91bootstrap";
++ reg = <0x00000000 0x00010000>;
++ };
++
++ bootloader at 00010000 {
++ label = "bootloader";
++ reg = <0x00010000 0x000a0000>;
++ };
++
++ bootloaderenv at 000b0000 {
++ label = "bootloader env";
++ reg = <0x000b0000 0x00010000>;
++ };
++
++ dtb at 000c0000 {
++ label = "device tree";
++ reg = <0x000c0000 0x0020000>;
++ };
++
++ kernel at 000e0000 {
++ label = "kernel";
++ reg = <0x000e0000 0x0400000>;
++ };
++ };
++ };
++
++ macb0: ethernet at f8008000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_macb0_default>;
++ phy-mode = "rmii";
++
++ ethernet-phy at 0 {
++ reg = <0x0>;
++ interrupt-parent = <&pioA>;
++ interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_macb0_phy_irq>;
++ };
++ };
++
++ i2c0: i2c at f8028000 {
++ dmas = <0>, <0>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_i2c0_default>;
++ status = "okay";
++
++ at24 at 50 {
++ compatible = "24c02";
++ reg = <0x50>;
++ pagesize = <8>;
++ };
++ };
++
++ pinctrl at fc038000 {
++ pinctrl_i2c0_default: i2c0_default {
++ pinmux = <PIN_PD21__TWD0>,
++ <PIN_PD22__TWCK0>;
++ bias-disable;
++ };
++
++ pinctrl_qspi1_default: qspi1_default {
++ sck_cs {
++ pinmux = <PIN_PB5__QSPI1_SCK>,
++ <PIN_PB6__QSPI1_CS>;
++ bias-disable;
++ };
++
++ data {
++ pinmux = <PIN_PB7__QSPI1_IO0>,
++ <PIN_PB8__QSPI1_IO1>,
++ <PIN_PB9__QSPI1_IO2>,
++ <PIN_PB10__QSPI1_IO3>;
++ bias-pull-up;
++ };
++ };
++
++ pinctrl_macb0_default: macb0_default {
++ pinmux = <PIN_PD9__GTXCK>,
++ <PIN_PD10__GTXEN>,
++ <PIN_PD11__GRXDV>,
++ <PIN_PD12__GRXER>,
++ <PIN_PD13__GRX0>,
++ <PIN_PD14__GRX1>,
++ <PIN_PD15__GTX0>,
++ <PIN_PD16__GTX1>,
++ <PIN_PD17__GMDC>,
++ <PIN_PD18__GMDIO>;
++ bias-disable;
++ };
++
++ pinctrl_macb0_phy_irq: macb0_phy_irq {
++ pinmux = <PIN_PD31__GPIO>;
++ bias-disable;
++ };
++ };
++ };
++ };
++};
+diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+new file mode 100644
+index 0000000..fd12b68
+--- /dev/null
++++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+@@ -0,0 +1,53 @@
++/*
++ * at91-sama5d27_som1_ek.dts - Device Tree file for SAMA5D27-SOM1-EK board
++ *
++ * Copyright (c) 2017, Microchip Technology Inc.
++ * 2016 Nicolas Ferre <nicolas.ferre at atmel.com>
++ * 2017 Cristian Birsan <cristian.birsan at microchip.com>
++ * 2017 Claudiu Beznea <claudiu.beznea at microchip.com>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This file is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++/dts-v1/;
++#include "at91-sama5d27_som1_ek_common.dtsi"
++
++/ {
++ model = "Atmel SAMA5D27 SOM1 EK";
++ compatible = "atmel,sama5d27-som1-ek", "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
++};
+diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek_common.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1_ek_common.dtsi
+new file mode 100644
+index 0000000..7201a8e
+--- /dev/null
++++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek_common.dtsi
+@@ -0,0 +1,619 @@
++/*
++ * at91-sama5d27_som1_ek_common.dtsi - Device Tree file for SAMA5D27-SOM1-EK board
++ *
++ * Copyright (c) 2017, Microchip Technology Inc.
++ * 2016 Nicolas Ferre <nicolas.ferre at atmel.com>
++ * 2017 Cristian Birsan <cristian.birsan at microchip.com>
++ * 2017 Claudiu Beznea <claudiu.beznea at microchip.com>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This file is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++#include "at91-sama5d27_som1.dtsi"
++#include <dt-bindings/mfd/atmel-flexcom.h>
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/pinctrl/at91.h>
++
++/ {
++ model = "Atmel SAMA5D27 SOM1 EK";
++ compatible = "atmel,sama5d27-som1-ek", "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
++
++ aliases {
++ serial0 = &uart1; /* DBGU */
++ serial1 = &uart4; /* mikro BUS 1 */
++ serial2 = &uart2; /* mikro BUS 2 */
++ i2c1 = &i2c1;
++ i2c2 = &i2c2;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++
++ ahb {
++ usb0: gadget at 00300000 {
++ atmel,vbus-gpio = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_usba_vbus>;
++ status = "okay";
++ };
++
++ usb1: ohci at 00400000 {
++ num-ports = <3>;
++ atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */
++ &pioA PIN_PA27 GPIO_ACTIVE_HIGH
++ 0
++ >;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_usb_default>;
++ status = "okay";
++ };
++
++ usb2: ehci at 00500000 {
++ status = "okay";
++ };
++
++ sdmmc0: sdio-host at a0000000 {
++ bus-width = <8>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_sdmmc0_default>;
++ status = "okay";
++ };
++
++ sdmmc1: sdio-host at b0000000 {
++ bus-width = <4>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_sdmmc1_default>;
++ status = "okay";
++ };
++
++ apb {
++ hlcdc: hlcdc at f0000000 {
++ status = "disabled";
++
++ hlcdc-display-controller {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb>;
++ };
++
++ hlcdc_pwm: hlcdc-pwm {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_lcd_pwm>;
++ };
++ };
++
++ pmc: pmc at f0014000 {
++ pmc_fast_restart {
++ compatible = "atmel,sama5d2-pmc-fast-startup";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ atmel,wakeup-rtc-timer;
++
++ wkpin: input at 0 {
++ reg = <0>;
++ };
++
++ gmac_wol: input at 10 {
++ reg = <10>;
++ atmel,wakeup-active-high;
++ };
++ };
++ };
++
++ isc: isc at f0008000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>;
++ status = "okay";
++ };
++
++ qspi1: spi at f0024000 {
++ status = "okay";
++ };
++
++ spi0: spi at f8000000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_spi0_default>;
++ status = "okay";
++ };
++
++ macb0: ethernet at f8008000 {
++ status = "okay";
++ };
++
++ uart1: serial at f8020000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_uart1_default>;
++ atmel,use-dma-rx;
++ atmel,use-dma-tx;
++ status = "okay";
++ };
++
++ uart2: serial at f8024000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_mikrobus2_uart>;
++ atmel,use-dma-rx;
++ atmel,use-dma-tx;
++ status = "okay";
++ };
++
++ pwm0: pwm at f802c000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_mikrobus1_pwm &pinctrl_mikrobus2_pwm>;
++ status = "disabled"; /* Conflict with leds. */
++ };
++
++ flx1: flexcom at f8038000 {
++ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
++ status = "okay";
++
++ i2c2: i2c at 600 {
++ compatible = "atmel,sama5d2-i2c";
++ reg = <0x600 0x200>;
++ interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
++ dmas = <0>, <0>;
++ dma-names = "tx", "rx";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ clocks = <&flx1_clk>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_mikrobus_i2c>;
++ atmel,fifo-size = <16>;
++ status = "okay";
++ };
++ };
++
++ shdwc at f8048010 {
++ atmel,shdwc-debouncer = <976>;
++ atmel,wakeup-rtc-timer;
++
++ input at 0 {
++ reg = <0>;
++ atmel,wakeup-type = "low";
++ };
++ };
++
++ watchdog at f8048040 {
++ status = "okay";
++ };
++
++ uart3: serial at fc008000 {
++ atmel,use-dma-rx;
++ atmel,use-dma-tx;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_uart3_default>;
++ status = "disabled"; /* Conflict with isc. */
++ };
++
++ uart4: serial at fc00c000 {
++ atmel,use-dma-rx;
++ atmel,use-dma-tx;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_mikrobus1_uart>;
++ status = "okay";
++ };
++
++ flx3: flexcom at fc014000 {
++ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
++ status = "disabled";
++
++ uart7: serial at 200 {
++ compatible = "atmel,at91sam9260-usart";
++ reg = <0x200 0x200>;
++ interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
++ clocks = <&flx3_clk>;
++ clock-names = "usart";
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_flx3_default>;
++ atmel,fifo-size = <32>;
++ status = "disabled"; /* Conflict with isc. */
++ };
++
++ spi2: spi at 400 {
++ compatible = "atmel,at91rm9200-spi";
++ reg = <0x400 0x200>;
++ interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
++ clocks = <&flx3_clk>;
++ clock-names = "spi_clk";
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_flx3_default>;
++ atmel,fifo-size = <16>;
++ status = "disabled"; /* Conflict with isc. */
++ };
++ };
++
++ flx4: flexcom at fc018000 {
++ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
++ status = "okay";
++
++ uart6: serial at 200 {
++ compatible = "atmel,at91sam9260-usart";
++ reg = <0x200 0x200>;
++ interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
++ clocks = <&flx4_clk>;
++ clock-names = "usart";
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_flx4_default>;
++ atmel,fifo-size = <32>;
++ status = "disabled"; /* Conflict with spi3 and i2c3. */
++ };
++
++ spi3: spi at 400 {
++ compatible = "atmel,at91rm9200-spi";
++ reg = <0x400 0x200>;
++ interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
++ clocks = <&flx4_clk>;
++ clock-names = "spi_clk";
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>;
++ atmel,fifo-size = <16>;
++ status = "okay";
++ };
++
++ i2c3: i2c at 600 {
++ compatible = "atmel,sama5d2-i2c";
++ reg = <0x600 0x200>;
++ interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
++ dmas = <0>, <0>;
++ dma-names = "tx", "rx";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ clocks = <&flx4_clk>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_flx4_default>;
++ atmel,fifo-size = <16>;
++ status = "disabled"; /* Conflict with uart6 and spi3. */
++ };
++ };
++
++ i2c1: i2c at fc028000 {
++ dmas = <0>, <0>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_i2c1_default>;
++ status = "okay";
++ };
++
++ pinctrl at fc038000 {
++
++ pinctrl_lcd_base: pinctrl_lcd_base {
++ pinmux = <PIN_PC5__LCDVSYNC>,
++ <PIN_PC6__LCDHSYNC>,
++ <PIN_PC8__LCDDEN>,
++ <PIN_PC7__LCDPCK>;
++ bias-disable;
++ drive-strength = <ATMEL_PIO_DRVSTR_ME>;
++ };
++
++ pinctrl_lcd_rgb: pinctrl_lcd_rgb {
++ pinmux = <PIN_PB11__LCDDAT0>,
++ <PIN_PB12__LCDDAT1>,
++ <PIN_PB13__LCDDAT2>,
++ <PIN_PB14__LCDDAT3>,
++ <PIN_PB15__LCDDAT4>,
++ <PIN_PB16__LCDDAT5>,
++ <PIN_PB17__LCDDAT6>,
++ <PIN_PB18__LCDDAT7>,
++ <PIN_PB19__LCDDAT8>,
++ <PIN_PB20__LCDDAT9>,
++ <PIN_PB21__LCDDAT10>,
++ <PIN_PB22__LCDDAT11>,
++ <PIN_PB23__LCDDAT12>,
++ <PIN_PB24__LCDDAT13>,
++ <PIN_PB25__LCDDAT14>,
++ <PIN_PB26__LCDDAT15>,
++ <PIN_PB27__LCDDAT16>,
++ <PIN_PB28__LCDDAT17>,
++ <PIN_PB29__LCDDAT18>,
++ <PIN_PB30__LCDDAT19>,
++ <PIN_PB31__LCDDAT20>,
++ <PIN_PC0__LCDDAT21>,
++ <PIN_PC1__LCDDAT22>,
++ <PIN_PC2__LCDDAT23>;
++ bias-disable;
++ };
++
++ pinctrl_lcd_pwm: pinctrl_lcd_pwm {
++ pinmux = <PIN_PC3__LCDPWM>;
++ bias-disable;
++ };
++
++ pinctrl_can1_default: can1_default {
++ pinmux = <PIN_PC26__CANTX1>,
++ <PIN_PC27__CANRX1>;
++ bias-disable;
++ };
++
++ pinctrl_flx3_default: flx3_default {
++ pinmux = <PIN_PC20__FLEXCOM3_IO0>,
++ <PIN_PC19__FLEXCOM3_IO1>,
++ <PIN_PC18__FLEXCOM3_IO2>,
++ <PIN_PC21__FLEXCOM3_IO3>,
++ <PIN_PC22__FLEXCOM3_IO4>;
++ bias-disable;
++ };
++
++ pinctrl_i2c1_default: i2c1_default {
++ pinmux = <PIN_PD4__TWD1>,
++ <PIN_PD5__TWCK1>;
++ bias-disable;
++ };
++
++ pinctrl_isc_base: isc_base {
++ pinmux = <PIN_PC21__ISC_PCK>,
++ <PIN_PC22__ISC_VSYNC>,
++ <PIN_PC23__ISC_HSYNC>,
++ <PIN_PC24__ISC_MCK>;
++ bias-disable;
++ };
++
++ pinctrl_isc_data_8bit: isc_data_8bit {
++ pinmux = <PIN_PC20__ISC_D11>,
++ <PIN_PC19__ISC_D10>,
++ <PIN_PC18__ISC_D9>,
++ <PIN_PC17__ISC_D8>,
++ <PIN_PC16__ISC_D7>,
++ <PIN_PC15__ISC_D6>,
++ <PIN_PC14__ISC_D5>,
++ <PIN_PC13__ISC_D4>;
++ bias-disable;
++ };
++
++ pinctrl_isc_data_9_10: isc_data_9_10 {
++ pinmux = <PIN_PC12__ISC_D3>,
++ <PIN_PC11__ISC_D2>;
++ bias-disable;
++ };
++
++ pinctrl_isc_data_11_12: isc_data_11_12 {
++ pinmux = <PIN_PC10__ISC_D1>,
++ <PIN_PC9__ISC_D0>;
++ bias-disable;
++ };
++
++ pinctrl_key_gpio_default: key_gpio_default {
++ pinmux = <PIN_PA29__GPIO>;
++ bias-pull-up;
++ };
++
++ pinctrl_led_gpio_default: led_gpio_default {
++ pinmux = <PIN_PA10__GPIO>,
++ <PIN_PB1__GPIO>,
++ <PIN_PA31__GPIO>;
++ bias-pull-up;
++ };
++
++ pinctrl_sdmmc0_default: sdmmc0_default {
++ cmd_data {
++ pinmux = <PIN_PA1__SDMMC0_CMD>,
++ <PIN_PA2__SDMMC0_DAT0>,
++ <PIN_PA3__SDMMC0_DAT1>,
++ <PIN_PA4__SDMMC0_DAT2>,
++ <PIN_PA5__SDMMC0_DAT3>,
++ <PIN_PA6__SDMMC0_DAT4>,
++ <PIN_PA7__SDMMC0_DAT5>,
++ <PIN_PA8__SDMMC0_DAT6>,
++ <PIN_PA9__SDMMC0_DAT7>;
++ bias-disable;
++ };
++
++ ck_cd_vddsel {
++ pinmux = <PIN_PA0__SDMMC0_CK>,
++ <PIN_PA11__SDMMC0_VDDSEL>,
++ <PIN_PA13__SDMMC0_CD>;
++ bias-disable;
++ };
++ };
++
++ pinctrl_sdmmc1_default: sdmmc1_default {
++ cmd_data {
++ pinmux = <PIN_PA28__SDMMC1_CMD>,
++ <PIN_PA18__SDMMC1_DAT0>,
++ <PIN_PA19__SDMMC1_DAT1>,
++ <PIN_PA20__SDMMC1_DAT2>,
++ <PIN_PA21__SDMMC1_DAT3>;
++ bias-disable;
++ };
++
++ conf-ck_cd {
++ pinmux = <PIN_PA22__SDMMC1_CK>,
++ <PIN_PA30__SDMMC1_CD>;
++ bias-disable;
++ };
++ };
++
++ pinctrl_spi0_default: spi0_default {
++ pinmux = <PIN_PA14__SPI0_SPCK>,
++ <PIN_PA15__SPI0_MOSI>,
++ <PIN_PA16__SPI0_MISO>,
++ <PIN_PA17__SPI0_NPCS0>;
++ bias-disable;
++ };
++
++ pinctrl_uart1_default: uart1_default {
++ pinmux = <PIN_PD2__URXD1>,
++ <PIN_PD3__UTXD1>;
++ bias-disable;
++ };
++
++ pinctrl_uart3_default: uart3_default {
++ pinmux = <PIN_PC12__URXD3>,
++ <PIN_PC13__UTXD3>;
++ bias-disable;
++ };
++
++ pinctrl_usb_default: usb_default {
++ pinmux = <PIN_PA27__GPIO>,
++ <PIN_PD19__GPIO>;
++ bias-disable;
++ };
++
++ pinctrl_usba_vbus: usba_vbus {
++ pinmux = <PIN_PD20__GPIO>;
++ bias-disable;
++ };
++
++ pinctrl_mikrobus1_an: mikrobus1_an {
++ pinmux = <PIN_PD25__GPIO>;
++ bias-disable;
++ };
++
++ pinctrl_mikrobus2_an: mikrobus2_an {
++ pinmux = <PIN_PD26__GPIO>;
++ bias-disable;
++ };
++
++ pinctrl_mikrobus1_rst: mikrobus1_rst {
++ pinmux = <PIN_PB2__GPIO>;
++ bias-disable;
++ };
++
++ pinctrl_mikrobus2_rst: mikrobus2_rst {
++ pinmux = <PIN_PA26__GPIO>;
++ bias-disable;
++ };
++
++ pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
++ pinmux = <PIN_PD0__FLEXCOM4_IO4>;
++ bias-disable;
++ };
++
++ pinctrl_mikrobus2_spi_cs: mikrobus2_spi_cs {
++ pinmux = <PIN_PC31__FLEXCOM4_IO3>;
++ bias-disable;
++ };
++
++ pinctrl_mikrobus_spi: mikrobus_spi {
++ pinmux = <PIN_PC28__FLEXCOM4_IO0>,
++ <PIN_PC29__FLEXCOM4_IO1>,
++ <PIN_PC30__FLEXCOM4_IO2>;
++ bias-disable;
++ };
++
++ pinctrl_mikrobus1_pwm: mikrobus1_pwm {
++ pinmux = <PIN_PB1__PWML1>;
++ bias-disable;
++ };
++
++ pinctrl_mikrobus2_pwm: mikrobus2_pwm {
++ pinmux = <PIN_PA31__PWML0>;
++ bias-disable;
++ };
++
++ pinctrl_mikrobus1_int: mikrobus1_int {
++ pinmux = <PIN_PB0__GPIO>;
++ bias-disable;
++ };
++
++ pinctrl_mikrobus2_int: mikrobus2_int {
++ pinmux = <PIN_PA25__GPIO>;
++ bias-disable;
++ };
++
++ pinctrl_mikrobus1_uart: mikrobus1_uart {
++ pinmux = <PIN_PB3__URXD4>,
++ <PIN_PB4__UTXD4>;
++ bias-disable;
++ };
++
++ pinctrl_mikrobus2_uart: mikrobus2_uart {
++ pinmux = <PIN_PD23__URXD2>,
++ <PIN_PD24__UTXD2>;
++ bias-disable;
++ };
++
++ pinctrl_mikrobus_i2c: mikrobus1_i2c {
++ pinmux = <PIN_PA24__FLEXCOM1_IO0>,
++ <PIN_PA23__FLEXCOM1_IO1>;
++ bias-disable;
++ };
++
++ pinctrl_flx4_default: flx4_uart_default {
++ pinmux = <PIN_PC28__FLEXCOM4_IO0>,
++ <PIN_PC29__FLEXCOM4_IO1>,
++ <PIN_PC30__FLEXCOM4_IO2>,
++ <PIN_PC31__FLEXCOM4_IO3>,
++ <PIN_PD0__FLEXCOM4_IO4>;
++ bias-disable;
++ };
++ };
++
++ can1: can at fc050000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_can1_default>;
++ status = "okay";
++ };
++ };
++ };
++
++ gpio_keys {
++ compatible = "gpio-keys";
++
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_key_gpio_default>;
++
++ pb4 {
++ label = "USER";
++ gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
++ linux,code = <0x104>;
++ wakeup-source;
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_led_gpio_default>;
++ status = "okay"; /* Conflict with pwm0. */
++
++ red {
++ label = "red";
++ gpios = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>;
++ };
++
++ green {
++ label = "green";
++ gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
++ };
++
++ blue {
++ label = "blue";
++ gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "heartbeat";
++ };
++ };
++};
+diff --git a/include/dt-bindings/pinctrl/at91.h b/include/dt-bindings/pinctrl/at91.h
+index bbca3d0..88eb7d0 100644
+--- a/include/dt-bindings/pinctrl/at91.h
++++ b/include/dt-bindings/pinctrl/at91.h
+@@ -37,4 +37,8 @@
+ #define AT91_PERIPH_C 3
+ #define AT91_PERIPH_D 4
+
++#define ATMEL_PIO_DRVSTR_LO 1
++#define ATMEL_PIO_DRVSTR_ME 2
++#define ATMEL_PIO_DRVSTR_HI 3
++
+ #endif /* __DT_BINDINGS_AT91_PINCTRL_H__ */
More information about the lede-commits
mailing list