[openwrt/openwrt] u-boot-mvebu: update to 2018.03
LEDE Commits
lede-commits at lists.infradead.org
Sat Mar 31 07:33:09 PDT 2018
hauke pushed a commit to openwrt/openwrt.git, branch master:
https://git.lede-project.org/dff904a955ee59b1495b82f765884f787d24d540
commit dff904a955ee59b1495b82f765884f787d24d540
Author: Josua Mayer <josua.mayer97 at gmail.com>
AuthorDate: Wed Mar 21 01:13:02 2018 +0100
u-boot-mvebu: update to 2018.03
This release brings various improvements to clearfog support, such as distro-boot.
Obsoletes:
0002-clearfog-reset-usom-onboard-1512-phy.patch
0003-clearfog-enable-distro-boot-code.patch
Signed-off-by: Josua Mayer <josua.mayer97 at gmail.com>
---
package/boot/uboot-mvebu/Makefile | 4 +-
...0002-clearfog-reset-usom-onboard-1512-phy.patch | 37 ---------
.../0003-clearfog-enable-distro-boot-code.patch | 97 ----------------------
3 files changed, 2 insertions(+), 136 deletions(-)
diff --git a/package/boot/uboot-mvebu/Makefile b/package/boot/uboot-mvebu/Makefile
index cb48b67..3005e45 100644
--- a/package/boot/uboot-mvebu/Makefile
+++ b/package/boot/uboot-mvebu/Makefile
@@ -8,10 +8,10 @@
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
-PKG_VERSION:=2017.03
+PKG_VERSION:=2018.03
PKG_RELEASE:=1
-PKG_HASH:=f54baf3f9325bf444c7905f3a5b6f83680edb1e6e1a4d5f8a5ad80abe885113f
+PKG_HASH:=7e7477534409d5368eb1371ffde6820f0f79780a1a1f676161c48442cb303dfd
include $(INCLUDE_DIR)/u-boot.mk
include $(INCLUDE_DIR)/package.mk
diff --git a/package/boot/uboot-mvebu/patches/0002-clearfog-reset-usom-onboard-1512-phy.patch b/package/boot/uboot-mvebu/patches/0002-clearfog-reset-usom-onboard-1512-phy.patch
deleted file mode 100644
index 164c6f3..0000000
--- a/package/boot/uboot-mvebu/patches/0002-clearfog-reset-usom-onboard-1512-phy.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 98848106b9558244ae36a85229caabcdb57d0f7b Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski at gmail.com>
-Date: Fri, 23 Sep 2016 13:58:14 +0200
-Subject: [PATCH 2/4] clearfog: reset usom onboard 1512 phy
-
-Use GPIO19 which is wired to the uSOM phy reset signal in order to reset
-the uSOM's 88E81512 gigabit Ethernet phy.
-
-This GPIO is valid on ClearFog rev 2.1 and newer.
-
-Signed-off-by: Rabeeh Khoury <rabeeh at solid-run.com>
-[jonas.gorski: adapted to upstream u-boot code]
-Signed-off-by: Jonas Gorski <jonas.gorski at gmail.com>
----
- board/solidrun/clearfog/clearfog.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
-diff --git a/board/solidrun/clearfog/clearfog.c b/board/solidrun/clearfog/clearfog.c
-index 2773f5957e..3a8257cac3 100644
---- a/board/solidrun/clearfog/clearfog.c
-+++ b/board/solidrun/clearfog/clearfog.c
-@@ -131,8 +131,12 @@ int board_init(void)
- /* Toggle GPIO41 to reset onboard switch and phy */
- clrbits_le32(MVEBU_GPIO1_BASE + 0x0, BIT(9));
- clrbits_le32(MVEBU_GPIO1_BASE + 0x4, BIT(9));
-+ /* GPIO 19 on ClearFog rev 2.1 controls the uSOM onboard phy reset */
-+ clrbits_le32(MVEBU_GPIO0_BASE + 0x0, BIT(19));
-+ clrbits_le32(MVEBU_GPIO0_BASE + 0x4, BIT(19));
- mdelay(1);
- setbits_le32(MVEBU_GPIO1_BASE + 0x0, BIT(9));
-+ setbits_le32(MVEBU_GPIO0_BASE + 0x0, BIT(19));
- mdelay(10);
-
- /* Init I2C IO expanders */
---
-2.12.2
-
diff --git a/package/boot/uboot-mvebu/patches/0003-clearfog-enable-distro-boot-code.patch b/package/boot/uboot-mvebu/patches/0003-clearfog-enable-distro-boot-code.patch
deleted file mode 100644
index 97b2d1f..0000000
--- a/package/boot/uboot-mvebu/patches/0003-clearfog-enable-distro-boot-code.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From 9653921eadd5d5268afbee6c928708158fc4e844 Mon Sep 17 00:00:00 2001
-From: Josua Mayer <josua.mayer97 at gmail.com>
-Date: Tue, 22 Nov 2016 16:33:23 +0100
-Subject: [PATCH 3/4] clearfog: enable distro boot code
-
-load addresses start at 0x02000000, leaving enough space for fdt,
-boot scripts and ramdisk at the end.
-Only boot from mmc, the other options are not in working order.
-Removed *_high variables in good faith. They can be re-added with sane
-values when, and if required.
-
-Signed-off-by: Josua Mayer <josua.mayer97 at gmail.com>
----
- Kconfig | 1 +
- include/configs/clearfog.h | 47 +++++++++++++++++++++++++++++++++++++++++-----
- 2 files changed, 43 insertions(+), 5 deletions(-)
-
-diff --git a/Kconfig b/Kconfig
-index 81b4226463..f7aec2255b 100644
---- a/Kconfig
-+++ b/Kconfig
-@@ -59,6 +59,7 @@ config DISTRO_DEFAULTS
- default y if ARCH_LS2080A
- default y if ARCH_MESON
- default y if ARCH_ROCKCHIP
-+ default y if TARGET_CLEARFOG
- default n
- select CMD_BOOTZ if ARM && !ARM64
- select CMD_BOOTI if ARM64
-diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h
-index 0c51d2a288..890dd84b5d 100644
---- a/include/configs/clearfog.h
-+++ b/include/configs/clearfog.h
-@@ -79,11 +79,6 @@
-
- #define CONFIG_SYS_ALT_MEMTEST
-
--/* Keep device tree and initrd in lower memory so the kernel can access them */
--#define CONFIG_EXTRA_ENV_SETTINGS \
-- "fdt_high=0x10000000\0" \
-- "initrd_high=0x10000000\0"
--
- /* SPL */
- /*
- * Select the boot device here
-@@ -128,6 +123,48 @@
- #endif
- #endif
-
-+#ifndef CONFIG_SPL_BUILD
-+/*
-+ * Add standard bootenv from distro boot code:
-+ * Keep device tree and initrd in lower memory so the kernel can access them
-+ * Set default load addresses:
-+ * - 63MiB space for kernel
-+ * - 1MiB space for fdt
-+ * - 1MiB space for extlinux file, or boot script
-+ * - remainder for ramdisk
-+ * Keep device tree and initrd in lower memory so the kernel can access them
-+ * Set name of fdt file (default to Clearfog Pro)
-+ * specify console device
-+ */
-+#define CONFIG_EXTRA_ENV_SETTINGS \
-+ "kernel_addr_r=0x02000000\0" \
-+ "fdt_addr_r=0x05f00000\0" \
-+ "pxefile_addr_r=0x06000000\0" \
-+ "scriptaddr=0x06000000\0" \
-+ "ramdisk_addr_r=0x06100000\0" \
-+ "fdt_high=0x10000000\0" \
-+ "initrd_high=0x10000000\0" \
-+ "fdtfile=armada-388-clearfog-pro.dtb\0" \
-+ "console=ttyS0," __stringify(CONFIG_BAUDRATE) "\0" \
-+ BOOTENV
-+
-+/* include distro boot code defaults */
-+#include <config_distro_defaults.h>
-+
-+/*
-+ * specify boot order
-+ * sdcard or emmc -> usb -> network
-+ */
-+#define BOOT_TARGET_DEVICES(func) \
-+ func(MMC, mmc, 0) \
-+ func(USB, usb, 0) \
-+ func(PXE, pxe, na) \
-+ func(DHCP, dhcp, na)
-+
-+/* include the actual distro boot code */
-+#include <config_distro_bootcmd.h>
-+#endif
-+
- /*
- * mv-common.h should be defined after CMD configs since it used them
- * to enable certain macros
---
-2.12.2
-
More information about the lede-commits
mailing list