[openwrt/openwrt] kirkwood: fix initramfs boot warning on iconnect

[LEDE Commits]

hauke pushed a commit to openwrt/openwrt.git, branch master:
https://git.lede-project.org/6fe9277d0c47777c27e162262e5337765e69d422

commit 6fe9277d0c47777c27e162262e5337765e69d422
Author: Paul Wassi <p.wassi at gmx.at>
AuthorDate: Fri Mar 16 09:29:40 2018 +0100

    kirkwood: fix initramfs boot warning on iconnect
    
    The chosen dts configuration linux,initrd-* gives an error message
    on bootup of kirkwood-iconnect. Since initramfs/initrd is not used
    remove these options from the dts.
    
    Reported-by: Daniel Engberg <daniel.engberg.lists at pyret.net>
    Tested-by: Daniel Engberg <daniel.engberg.lists at pyret.net>
    Signed-off-by: Paul Wassi <p.wassi at gmx.at>
---
 target/linux/kirkwood/patches-4.14/101-iconnect.patch | 11 ++++++++++-
 target/linux/kirkwood/patches-4.9/101-iconnect.patch  | 11 ++++++++++-
 2 files changed, 20 insertions(+), 2 deletions(-)

diff --git a/target/linux/kirkwood/patches-4.14/101-iconnect.patch b/target/linux/kirkwood/patches-4.14/101-iconnect.patch
index ba81e16..ab47b5a 100644
--- a/target/linux/kirkwood/patches-4.14/101-iconnect.patch
+++ b/target/linux/kirkwood/patches-4.14/101-iconnect.patch
@@ -1,6 +1,15 @@
 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts
 +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
-@@ -146,28 +146,23 @@
+@@ -16,8 +16,6 @@
+ 	chosen {
+ 		bootargs = "console=ttyS0,115200n8 earlyprintk";
+ 		stdout-path = &uart0;
+-		linux,initrd-start = <0x4500040>;
+-		linux,initrd-end   = <0x4800000>;
+ 	};
+ 
+ 	ocp at f1000000 {
+@@ -146,28 +144,23 @@
  	status = "okay";
  
  	partition at 0 {
diff --git a/target/linux/kirkwood/patches-4.9/101-iconnect.patch b/target/linux/kirkwood/patches-4.9/101-iconnect.patch
index 20fb0c8..17705ea 100644
--- a/target/linux/kirkwood/patches-4.9/101-iconnect.patch
+++ b/target/linux/kirkwood/patches-4.9/101-iconnect.patch
@@ -1,6 +1,15 @@
 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts
 +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
-@@ -145,28 +145,23 @@
+@@ -15,8 +15,6 @@
+ 	chosen {
+ 		bootargs = "console=ttyS0,115200n8 earlyprintk";
+ 		stdout-path = &uart0;
+-		linux,initrd-start = <0x4500040>;
+-		linux,initrd-end   = <0x4800000>;
+ 	};
+ 
+ 	ocp at f1000000 {
+@@ -145,28 +143,23 @@
  	status = "okay";
  
  	partition at 0 {