[openwrt/openwrt] lantiq/xrx200: add usif support to dts files

[LEDE Commits]

mkresin pushed a commit to openwrt/openwrt.git, branch master:
https://git.lede-project.org/d84ac78d6aae9218fe3cc8ffc0d73291c633841a

commit d84ac78d6aae9218fe3cc8ffc0d73291c633841a
Author: Martin Schiller <ms at dev.tdt.de>
AuthorDate: Fri Feb 23 14:15:49 2018 +0100

    lantiq/xrx200: add usif support to dts files
    
    The Lantiq XRX200 aka VR9 doesn't have an asc0. Instead,
    there is an USIF module which can either be an UART or a
    SPI Controller.
    
    Signed-off-by: Martin Schiller <ms at dev.tdt.de>
---
 target/linux/lantiq/files-4.14/arch/mips/boot/dts/vr9.dtsi | 8 ++++----
 target/linux/lantiq/files-4.9/arch/mips/boot/dts/vr9.dtsi  | 8 ++++----
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/vr9.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/vr9.dtsi
index adad950..77e0cba 100644
--- a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/vr9.dtsi
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/vr9.dtsi
@@ -184,11 +184,11 @@
 			interrupts = <126 127 128 129 130 131>;
 		};
 
-		asc0: serial at e100400 {
-			compatible = "lantiq,asc";
-			reg = <0xe100400 0x400>;
+		usif: usif at da00000 {
+			compatible = "lantiq,usif";
+			reg = <0xda00000 0x1000000>;
 			interrupt-parent = <&icu0>;
-			interrupts = <104 105 106>;
+			interrupts = <29 125 107 108 109 110>;
 			status = "disabled";
 		};
 
diff --git a/target/linux/lantiq/files-4.9/arch/mips/boot/dts/vr9.dtsi b/target/linux/lantiq/files-4.9/arch/mips/boot/dts/vr9.dtsi
index 13bb002..dbcbb3d 100644
--- a/target/linux/lantiq/files-4.9/arch/mips/boot/dts/vr9.dtsi
+++ b/target/linux/lantiq/files-4.9/arch/mips/boot/dts/vr9.dtsi
@@ -126,11 +126,11 @@
 			interrupts = <126 127 128 129 130 131>;
 		};
 
-		asc0: serial at E100400 {
-			compatible = "lantiq,asc";
-			reg = <0xE100400 0x400>;
+		usif: usif at da00000 {
+			compatible = "lantiq,usif";
+			reg = <0xda00000 0x1000000>;
 			interrupt-parent = <&icu0>;
-			interrupts = <104 105 106>;
+			interrupts = <29 125 107 108 109 110>;
 			status = "disabled";
 		};