[openwrt/openwrt] kernel: add IEEE-1284 parallel port support

[LEDE Commits]

blogic pushed a commit to openwrt/openwrt.git, branch master:
https://git.lede-project.org/666e9cf2220b11ccd024cad13ad54ca71d40c5b3

commit 666e9cf2220b11ccd024cad13ad54ca71d40c5b3
Author: Daniel Gimpelevich <daniel at gimpelevich.san-francisco.ca.us>
AuthorDate: Thu Jan 18 03:52:12 2018 -0800

    kernel: add IEEE-1284 parallel port support
    
    The kmod-lp package included both lp.ko and ppdev.ko, but ECP device
    drivers may or may not require lp NOT to be loaded, needing only ppdev.
    Additionally, There were no packages for any parport interface modules,
    such as uss720 or parport_pc, provided here. It has not been otherwise
    possible to use PC-style parport hardware for kmod-lp.
    
    Signed-off-by: Daniel Gimpelevich <daniel at gimpelevich.san-francisco.ca.us>
---
 package/kernel/linux/modules/other.mk | 43 +++++++++++++++++++++++++++++++----
 1 file changed, 38 insertions(+), 5 deletions(-)

diff --git a/package/kernel/linux/modules/other.mk b/package/kernel/linux/modules/other.mk
index 973e4f3..94f98ff 100644
--- a/package/kernel/linux/modules/other.mk
+++ b/package/kernel/linux/modules/other.mk
@@ -285,18 +285,51 @@ endef
 $(eval $(call KernelPackage,gpio-pcf857x))
 
 
-define KernelPackage/lp
+define KernelPackage/ppdev
   SUBMENU:=$(OTHER_MENU)
-  TITLE:=Parallel port and line printer support
+  TITLE:=Parallel port support
   KCONFIG:= \
 	CONFIG_PARPORT \
-	CONFIG_PRINTER \
 	CONFIG_PPDEV
   FILES:= \
 	$(LINUX_DIR)/drivers/parport/parport.ko \
-	$(LINUX_DIR)/drivers/char/lp.ko \
 	$(LINUX_DIR)/drivers/char/ppdev.ko
-  AUTOLOAD:=$(call AutoLoad,50,parport lp ppdev)
+  AUTOLOAD:=$(call AutoLoad,50,parport ppdev)
+endef
+
+$(eval $(call KernelPackage,ppdev))
+
+
+define KernelPackage/parport-pc
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=Parallel port interface (PC-style) support
+  DEPENDS:=+kmod-ppdev
+  KCONFIG:= \
+	CONFIG_PARPORT_PC \
+	CONFIG_PARPORT_1284=y \
+	CONFIG_PARPORT_PC_FIFO=y \
+	CONFIG_PARPORT_PC_SUPERIO=y \
+	CONFIG_PARPORT_SERIAL=n \
+	CONFIG_PARIDE=n \
+	CONFIG_SCSI_IMM=n \
+	CONFIG_SCSI_PPA=n
+  FILES:= \
+	$(LINUX_DIR)/drivers/parport/parport_pc.ko
+  AUTOLOAD:=$(call AutoLoad,51,parport_pc)
+endef
+
+$(eval $(call KernelPackage,parport-pc))
+
+
+define KernelPackage/lp
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=Parallel port line printer device support
+  DEPENDS:=+kmod-ppdev
+  KCONFIG:= \
+	CONFIG_PRINTER
+  FILES:= \
+	$(LINUX_DIR)/drivers/char/lp.ko
+  AUTOLOAD:=$(call AutoLoad,52,lp)
 endef
 
 $(eval $(call KernelPackage,lp))