[openwrt/openwrt] cns3xxx: refresh patches

LEDE Commits lede-commits at lists.infradead.org
Wed Jan 17 02:07:34 PST 2018 

blogic pushed a commit to openwrt/openwrt.git, branch master:
https://git.lede-project.org/9e7d53c3fed13d9e2da5f11c4c888efa3cd85312

commit 9e7d53c3fed13d9e2da5f11c4c888efa3cd85312
Author: Koen Vandeputte <koen.vandeputte at ncentric.com>
AuthorDate: Thu Jan 11 16:04:39 2018 +0100

    cns3xxx: refresh patches
    
    Signed-off-by: Koen Vandeputte <koen.vandeputte at ncentric.com>
---
 .../patches-4.14/010-arm_introduce-dma-fiq-irq-broadcast.patch    | 6 +++---
 target/linux/cns3xxx/patches-4.14/020-watchdog_support.patch      | 8 ++++----
 target/linux/cns3xxx/patches-4.14/025-smp_support.patch           | 4 ++--
 target/linux/cns3xxx/patches-4.14/040-fiq_support.patch           | 6 +++---
 target/linux/cns3xxx/patches-4.14/070-i2c_support.patch           | 6 +++---
 target/linux/cns3xxx/patches-4.14/095-gpio_support.patch          | 4 ++--
 target/linux/cns3xxx/patches-4.14/100-laguna_support.patch        | 4 ++--
 ...CIE_BUS_PEER2PEER-to-set-MRSS-128-to-fix-CNS3xxx-BM-DMA..patch | 4 ++--
 8 files changed, 21 insertions(+), 21 deletions(-)

diff --git a/target/linux/cns3xxx/patches-4.14/010-arm_introduce-dma-fiq-irq-broadcast.patch b/target/linux/cns3xxx/patches-4.14/010-arm_introduce-dma-fiq-irq-broadcast.patch
index b2b6f50..ca7148b 100644
--- a/target/linux/cns3xxx/patches-4.14/010-arm_introduce-dma-fiq-irq-broadcast.patch
+++ b/target/linux/cns3xxx/patches-4.14/010-arm_introduce-dma-fiq-irq-broadcast.patch
@@ -20,7 +20,7 @@
  #endif
 --- a/arch/arm/mm/Kconfig
 +++ b/arch/arm/mm/Kconfig
-@@ -873,6 +873,17 @@ config DMA_CACHE_RWFO
+@@ -899,6 +899,17 @@ config DMA_CACHE_RWFO
  	  in hardware, other workarounds are needed (e.g. cache
  	  maintenance broadcasting in software via FIQ).
  
@@ -48,7 +48,7 @@
  
  	/*
  	 * The zero page is never written to, so never has any dirty
-@@ -329,7 +330,10 @@ void flush_dcache_page(struct page *page
+@@ -335,7 +336,10 @@ void flush_dcache_page(struct page *page
  
  	mapping = page_mapping(page);
  
@@ -62,7 +62,7 @@
  	else {
 --- a/arch/arm/mm/dma.h
 +++ b/arch/arm/mm/dma.h
-@@ -4,8 +4,13 @@
+@@ -5,8 +5,13 @@
  #include <asm/glue-cache.h>
  
  #ifndef MULTI_CACHE
diff --git a/target/linux/cns3xxx/patches-4.14/020-watchdog_support.patch b/target/linux/cns3xxx/patches-4.14/020-watchdog_support.patch
index 4f9f3e6..6dd0ef0 100644
--- a/target/linux/cns3xxx/patches-4.14/020-watchdog_support.patch
+++ b/target/linux/cns3xxx/patches-4.14/020-watchdog_support.patch
@@ -4,7 +4,7 @@ Signed-off-by: Felix Fietkau <nbd at nbd.name>
 ---
 --- a/drivers/watchdog/Kconfig
 +++ b/drivers/watchdog/Kconfig
-@@ -324,6 +324,13 @@ config KS8695_WATCHDOG
+@@ -355,6 +355,13 @@ config KS8695_WATCHDOG
  	  Watchdog timer embedded into KS8695 processor. This will reboot your
  	  system when the timeout is reached.
  
@@ -20,8 +20,8 @@ Signed-off-by: Felix Fietkau <nbd at nbd.name>
  	help
 --- a/drivers/watchdog/Makefile
 +++ b/drivers/watchdog/Makefile
-@@ -47,6 +47,7 @@ obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
- obj-$(CONFIG_977_WATCHDOG) += wdt977.o
+@@ -49,6 +49,7 @@ obj-$(CONFIG_977_WATCHDOG) += wdt977.o
+ obj-$(CONFIG_GEMINI_WATCHDOG) += gemini_wdt.o
  obj-$(CONFIG_IXP4XX_WATCHDOG) += ixp4xx_wdt.o
  obj-$(CONFIG_KS8695_WATCHDOG) += ks8695_wdt.o
 +obj-$(CONFIG_MPCORE_WATCHDOG) += mpcore_wdt.o
@@ -151,7 +151,7 @@ Signed-off-by: Felix Fietkau <nbd at nbd.name>
 +MODULE_LICENSE("GPL");
 --- a/arch/arm/include/asm/smp_twd.h
 +++ b/arch/arm/include/asm/smp_twd.h
-@@ -33,5 +33,6 @@ struct twd_local_timer name __initdata =
+@@ -34,5 +34,6 @@ struct twd_local_timer name __initdata =
  };
  
  int twd_local_timer_register(struct twd_local_timer *);
diff --git a/target/linux/cns3xxx/patches-4.14/025-smp_support.patch b/target/linux/cns3xxx/patches-4.14/025-smp_support.patch
index 7c2624a..dc8e4b0 100644
--- a/target/linux/cns3xxx/patches-4.14/025-smp_support.patch
+++ b/target/linux/cns3xxx/patches-4.14/025-smp_support.patch
@@ -1,6 +1,6 @@
 --- a/arch/arm/mach-cns3xxx/Makefile
 +++ b/arch/arm/mach-cns3xxx/Makefile
-@@ -5,3 +5,5 @@ cns3xxx-y				+= core.o pm.o
+@@ -6,3 +6,5 @@ cns3xxx-y				+= core.o pm.o
  cns3xxx-$(CONFIG_ATAGS)			+= devices.o
  cns3xxx-$(CONFIG_PCI)			+= pcie.o
  cns3xxx-$(CONFIG_MACH_CNS3420VB)	+= cns3420vb.o
@@ -8,7 +8,7 @@
 +cns3xxx-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
 --- a/arch/arm/mach-cns3xxx/Kconfig
 +++ b/arch/arm/mach-cns3xxx/Kconfig
-@@ -2,6 +2,9 @@ menuconfig ARCH_CNS3XXX
+@@ -3,6 +3,9 @@ menuconfig ARCH_CNS3XXX
  	bool "Cavium Networks CNS3XXX family"
  	depends on ARCH_MULTI_V6
  	select ARM_GIC
diff --git a/target/linux/cns3xxx/patches-4.14/040-fiq_support.patch b/target/linux/cns3xxx/patches-4.14/040-fiq_support.patch
index b391eb9..a52c554 100644
--- a/target/linux/cns3xxx/patches-4.14/040-fiq_support.patch
+++ b/target/linux/cns3xxx/patches-4.14/040-fiq_support.patch
@@ -1,6 +1,6 @@
 --- a/arch/arm/mach-cns3xxx/Kconfig
 +++ b/arch/arm/mach-cns3xxx/Kconfig
-@@ -5,6 +5,7 @@ menuconfig ARCH_CNS3XXX
+@@ -6,6 +6,7 @@ menuconfig ARCH_CNS3XXX
  	select HAVE_ARM_SCU if SMP
  	select HAVE_ARM_TWD
  	select HAVE_SMP
@@ -10,7 +10,7 @@
  
 --- a/arch/arm/mach-cns3xxx/Makefile
 +++ b/arch/arm/mach-cns3xxx/Makefile
-@@ -5,5 +5,5 @@ cns3xxx-y				+= core.o pm.o
+@@ -6,5 +6,5 @@ cns3xxx-y				+= core.o pm.o
  cns3xxx-$(CONFIG_ATAGS)			+= devices.o
  cns3xxx-$(CONFIG_PCI)			+= pcie.o
  cns3xxx-$(CONFIG_MACH_CNS3420VB)	+= cns3420vb.o
@@ -29,7 +29,7 @@
   */
 --- a/arch/arm/mm/Kconfig
 +++ b/arch/arm/mm/Kconfig
-@@ -856,7 +856,7 @@ config VDSO
+@@ -882,7 +882,7 @@ config VDSO
  
  config DMA_CACHE_RWFO
  	bool "Enable read/write for ownership DMA cache maintenance"
diff --git a/target/linux/cns3xxx/patches-4.14/070-i2c_support.patch b/target/linux/cns3xxx/patches-4.14/070-i2c_support.patch
index dc64da1..bacec36 100644
--- a/target/linux/cns3xxx/patches-4.14/070-i2c_support.patch
+++ b/target/linux/cns3xxx/patches-4.14/070-i2c_support.patch
@@ -1,6 +1,6 @@
 --- a/drivers/i2c/busses/Kconfig
 +++ b/drivers/i2c/busses/Kconfig
-@@ -441,6 +441,18 @@ config I2C_CBUS_GPIO
+@@ -473,6 +473,18 @@ config I2C_CBUS_GPIO
  	  This driver can also be built as a module.  If so, the module
  	  will be called i2c-cbus-gpio.
  
@@ -21,11 +21,11 @@
  	depends on CPM1 || CPM2
 --- a/drivers/i2c/busses/Makefile
 +++ b/drivers/i2c/busses/Makefile
-@@ -114,6 +114,7 @@ obj-$(CONFIG_I2C_VIPERBOARD)	+= i2c-vipe
+@@ -128,6 +128,7 @@ obj-$(CONFIG_I2C_VIPERBOARD)	+= i2c-vipe
  obj-$(CONFIG_I2C_ACORN)		+= i2c-acorn.o
  obj-$(CONFIG_I2C_BCM_KONA)	+= i2c-bcm-kona.o
  obj-$(CONFIG_I2C_BRCMSTB)	+= i2c-brcmstb.o
 +obj-$(CONFIG_I2C_CNS3XXX)	+= i2c-cns3xxx.o
  obj-$(CONFIG_I2C_CROS_EC_TUNNEL)	+= i2c-cros-ec-tunnel.o
  obj-$(CONFIG_I2C_ELEKTOR)	+= i2c-elektor.o
- obj-$(CONFIG_I2C_OPAL)		+= i2c-opal.o
+ obj-$(CONFIG_I2C_MLXCPLD)	+= i2c-mlxcpld.o
diff --git a/target/linux/cns3xxx/patches-4.14/095-gpio_support.patch b/target/linux/cns3xxx/patches-4.14/095-gpio_support.patch
index 76eb7f6..8345f2f 100644
--- a/target/linux/cns3xxx/patches-4.14/095-gpio_support.patch
+++ b/target/linux/cns3xxx/patches-4.14/095-gpio_support.patch
@@ -13,7 +13,7 @@
  }
 --- a/arch/arm/mach-cns3xxx/Kconfig
 +++ b/arch/arm/mach-cns3xxx/Kconfig
-@@ -2,6 +2,8 @@ menuconfig ARCH_CNS3XXX
+@@ -3,6 +3,8 @@ menuconfig ARCH_CNS3XXX
  	bool "Cavium Networks CNS3XXX family"
  	depends on ARCH_MULTI_V6
  	select ARM_GIC
@@ -24,7 +24,7 @@
  	select HAVE_SMP
 --- a/arch/arm/mach-cns3xxx/Makefile
 +++ b/arch/arm/mach-cns3xxx/Makefile
-@@ -1,7 +1,7 @@
+@@ -2,7 +2,7 @@
  ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
  
  obj-$(CONFIG_ARCH_CNS3XXX)		+= cns3xxx.o
diff --git a/target/linux/cns3xxx/patches-4.14/100-laguna_support.patch b/target/linux/cns3xxx/patches-4.14/100-laguna_support.patch
index 3c0bba4..c0160d8 100644
--- a/target/linux/cns3xxx/patches-4.14/100-laguna_support.patch
+++ b/target/linux/cns3xxx/patches-4.14/100-laguna_support.patch
@@ -1,6 +1,6 @@
 --- a/arch/arm/mach-cns3xxx/Kconfig
 +++ b/arch/arm/mach-cns3xxx/Kconfig
-@@ -22,4 +22,12 @@ config MACH_CNS3420VB
+@@ -23,4 +23,12 @@ config MACH_CNS3420VB
  	  This is a platform with an on-board ARM11 MPCore and has support
  	  for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, etc.
  
@@ -15,7 +15,7 @@
  endif
 --- a/arch/arm/mach-cns3xxx/Makefile
 +++ b/arch/arm/mach-cns3xxx/Makefile
-@@ -7,3 +7,5 @@ cns3xxx-$(CONFIG_PCI)			+= pcie.o
+@@ -8,3 +8,5 @@ cns3xxx-$(CONFIG_PCI)			+= pcie.o
  cns3xxx-$(CONFIG_MACH_CNS3420VB)	+= cns3420vb.o
  cns3xxx-$(CONFIG_SMP)			+= platsmp.o headsmp.o cns3xxx_fiq.o
  cns3xxx-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
diff --git a/target/linux/cns3xxx/patches-4.14/130-Extend-PCIE_BUS_PEER2PEER-to-set-MRSS-128-to-fix-CNS3xxx-BM-DMA..patch b/target/linux/cns3xxx/patches-4.14/130-Extend-PCIE_BUS_PEER2PEER-to-set-MRSS-128-to-fix-CNS3xxx-BM-DMA..patch
index 2e30fe5..42430ea 100644
--- a/target/linux/cns3xxx/patches-4.14/130-Extend-PCIE_BUS_PEER2PEER-to-set-MRSS-128-to-fix-CNS3xxx-BM-DMA..patch
+++ b/target/linux/cns3xxx/patches-4.14/130-Extend-PCIE_BUS_PEER2PEER-to-set-MRSS-128-to-fix-CNS3xxx-BM-DMA..patch
@@ -1,6 +1,6 @@
 --- a/drivers/pci/probe.c
 +++ b/drivers/pci/probe.c
-@@ -2015,7 +2015,8 @@ static void pcie_write_mrrs(struct pci_d
+@@ -2303,7 +2303,8 @@ static void pcie_write_mrrs(struct pci_d
  	/* In the "safe" case, do not configure the MRRS.  There appear to be
  	 * issues with setting MRRS to 0 on a number of devices.
  	 */
@@ -12,7 +12,7 @@
  	/* For Max performance, the MRRS must be set to the largest supported
 --- a/include/linux/pci.h
 +++ b/include/linux/pci.h
-@@ -783,7 +783,7 @@ enum pcie_bus_config_types {
+@@ -845,7 +845,7 @@ enum pcie_bus_config_types {
  	PCIE_BUS_DEFAULT,	/* ensure MPS matches upstream bridge */
  	PCIE_BUS_SAFE,		/* use largest MPS boot-time devices support */
  	PCIE_BUS_PERFORMANCE,	/* use MPS and MRRS for best performance */

More information about the lede-commits mailing list