[openwrt/openwrt] cns3xxx: update patches for 4.14
LEDE Commits
lede-commits at lists.infradead.org
Wed Jan 17 02:07:31 PST 2018
blogic pushed a commit to openwrt/openwrt.git, branch master:
https://git.lede-project.org/9f54aaff7024c462936cf1e62a59a7d183660fd1
commit 9f54aaff7024c462936cf1e62a59a7d183660fd1
Author: Koen Vandeputte <koen.vandeputte at ncentric.com>
AuthorDate: Thu Jan 11 16:04:36 2018 +0100
cns3xxx: update patches for 4.14
Signed-off-by: Koen Vandeputte <koen.vandeputte at ncentric.com>
---
.../patches-4.14/000-cns3xxx_arch_include.patch | 3 +-
.../patches-4.14/001-arm_openwrt_machtypes.patch | 11 ++-
.../cns3xxx/patches-4.14/075-spi_support.patch | 12 +--
target/linux/cns3xxx/patches-4.14/090-timers.patch | 2 +-
.../patches-4.14/200-broadcom_phy_reinit.patch | 19 ++--
.../cns3xxx/patches-4.14/210-dwc2_defaults.patch | 102 ++++++++++++---------
6 files changed, 85 insertions(+), 64 deletions(-)
diff --git a/target/linux/cns3xxx/patches-4.14/000-cns3xxx_arch_include.patch b/target/linux/cns3xxx/patches-4.14/000-cns3xxx_arch_include.patch
index f98fe0c..3ae7590 100644
--- a/target/linux/cns3xxx/patches-4.14/000-cns3xxx_arch_include.patch
+++ b/target/linux/cns3xxx/patches-4.14/000-cns3xxx_arch_include.patch
@@ -1,6 +1,7 @@
--- a/arch/arm/mach-cns3xxx/Makefile
+++ b/arch/arm/mach-cns3xxx/Makefile
-@@ -1,3 +1,5 @@
+@@ -1,4 +1,6 @@
+ # SPDX-License-Identifier: GPL-2.0
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
+
obj-$(CONFIG_ARCH_CNS3XXX) += cns3xxx.o
diff --git a/target/linux/cns3xxx/patches-4.14/001-arm_openwrt_machtypes.patch b/target/linux/cns3xxx/patches-4.14/001-arm_openwrt_machtypes.patch
index 32f977f..17a83ea 100644
--- a/target/linux/cns3xxx/patches-4.14/001-arm_openwrt_machtypes.patch
+++ b/target/linux/cns3xxx/patches-4.14/001-arm_openwrt_machtypes.patch
@@ -1,7 +1,10 @@
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
-@@ -1006,3 +1006,4 @@ eco5_bx2 MACH_ECO5_BX2 ECO5_BX2 4572
- eukrea_cpuimx28sd MACH_EUKREA_CPUIMX28SD EUKREA_CPUIMX28SD 4573
- domotab MACH_DOMOTAB DOMOTAB 4574
- pfla03 MACH_PFLA03 PFLA03 4575
+@@ -448,6 +448,7 @@ gplugd MACH_GPLUGD GPLUGD 2625
+ qsd8x50a_st1_5 MACH_QSD8X50A_ST1_5 QSD8X50A_ST1_5 2627
+ mx23evk MACH_MX23EVK MX23EVK 2629
+ ap4evb MACH_AP4EVB AP4EVB 2630
+gw2388 MACH_GW2388 GW2388 2635
+ mityomapl138 MACH_MITYOMAPL138 MITYOMAPL138 2650
+ guruplug MACH_GURUPLUG GURUPLUG 2659
+ spear310 MACH_SPEAR310 SPEAR310 2660
diff --git a/target/linux/cns3xxx/patches-4.14/075-spi_support.patch b/target/linux/cns3xxx/patches-4.14/075-spi_support.patch
index aeda7a3..8a51eb3 100644
--- a/target/linux/cns3xxx/patches-4.14/075-spi_support.patch
+++ b/target/linux/cns3xxx/patches-4.14/075-spi_support.patch
@@ -1,6 +1,6 @@
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
-@@ -199,6 +199,13 @@ config SPI_CLPS711X
+@@ -206,6 +206,13 @@ config SPI_CLPS711X
This enables dedicated general purpose SPI/Microwire1-compatible
master mode interface (SSI1) for CLPS711X-based CPUs.
@@ -16,7 +16,7 @@
depends on (M520x || M523x || M5249 || M525x || M527x || M528x || M532x)
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
-@@ -29,6 +29,7 @@ obj-$(CONFIG_SPI_BITBANG) += spi-bitban
+@@ -31,6 +31,7 @@ obj-$(CONFIG_SPI_BITBANG) += spi-bitban
obj-$(CONFIG_SPI_BUTTERFLY) += spi-butterfly.o
obj-$(CONFIG_SPI_CADENCE) += spi-cadence.o
obj-$(CONFIG_SPI_CLPS711X) += spi-clps711x.o
@@ -26,7 +26,7 @@
obj-$(CONFIG_SPI_DLN2) += spi-dln2.o
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
-@@ -763,6 +763,10 @@ struct spi_transfer {
+@@ -799,6 +799,10 @@ struct spi_transfer {
u32 speed_hz;
struct list_head transfer_list;
@@ -39,13 +39,13 @@
/**
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
-@@ -985,6 +985,9 @@ static int spi_transfer_one_message(stru
+@@ -1021,6 +1021,9 @@ static int spi_transfer_one_message(stru
list_for_each_entry(xfer, &msg->transfers, transfer_list) {
trace_spi_transfer_start(msg, xfer);
+ xfer->last_in_message_list =
+ list_is_last(&xfer->transfer_list, &msg->transfers);
+
- spi_statistics_add_transfer_stats(statm, xfer, master);
- spi_statistics_add_transfer_stats(stats, xfer, master);
+ spi_statistics_add_transfer_stats(statm, xfer, ctlr);
+ spi_statistics_add_transfer_stats(stats, xfer, ctlr);
diff --git a/target/linux/cns3xxx/patches-4.14/090-timers.patch b/target/linux/cns3xxx/patches-4.14/090-timers.patch
index 6f7713f..34a4934 100644
--- a/target/linux/cns3xxx/patches-4.14/090-timers.patch
+++ b/target/linux/cns3xxx/patches-4.14/090-timers.patch
@@ -30,7 +30,7 @@
twd_local_timer_register(&cns3xx_twd_local_timer);
}
-+static cycle_t cns3xxx_get_cycles(struct clocksource *cs)
++static u64 cns3xxx_get_cycles(struct clocksource *cs)
+{
+ u64 val;
+
diff --git a/target/linux/cns3xxx/patches-4.14/200-broadcom_phy_reinit.patch b/target/linux/cns3xxx/patches-4.14/200-broadcom_phy_reinit.patch
index 0352a89..6880533 100644
--- a/target/linux/cns3xxx/patches-4.14/200-broadcom_phy_reinit.patch
+++ b/target/linux/cns3xxx/patches-4.14/200-broadcom_phy_reinit.patch
@@ -1,14 +1,15 @@
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
-@@ -420,6 +420,11 @@ static int bcm5481_config_aneg(struct ph
- /* Write bits 14:0. */
- reg |= (1 << 15);
- phy_write(phydev, 0x18, reg);
-+ } else {
-+ phy_write(phydev, 0x18, 0xf1e7);
-+ phy_write(phydev, 0x1c, 0x8e00);
+@@ -417,7 +417,11 @@ static int bcm5481_config_aneg(struct ph
+ ret = genphy_config_aneg(phydev);
+
+ /* Then we can set up the delay. */
+- bcm5481x_config(phydev);
++ //bcm5481x_config(phydev);
+
-+ phy_write(phydev, 0x1c, 0xa41f);
- }
++ phy_write(phydev, 0x18, 0xf1e7);
++ phy_write(phydev, 0x1c, 0x8e00);
++ phy_write(phydev, 0x1c, 0xa41f);
if (of_property_read_bool(np, "enet-phy-lane-swap")) {
+ /* Lane Swap - Undocumented register...magic! */
diff --git a/target/linux/cns3xxx/patches-4.14/210-dwc2_defaults.patch b/target/linux/cns3xxx/patches-4.14/210-dwc2_defaults.patch
index 9cd05ea..67f152f 100644
--- a/target/linux/cns3xxx/patches-4.14/210-dwc2_defaults.patch
+++ b/target/linux/cns3xxx/patches-4.14/210-dwc2_defaults.patch
@@ -1,47 +1,63 @@
---- a/drivers/usb/dwc2/platform.c
-+++ b/drivers/usb/dwc2/platform.c
-@@ -308,6 +308,34 @@ static int __dwc2_lowlevel_hw_enable(str
- return ret;
+--- a/drivers/usb/dwc2/params.c
++++ b/drivers/usb/dwc2/params.c
+@@ -136,6 +136,36 @@ static void dwc2_set_stm32f4x9_fsotg_par
+ p->activate_stm_fs_transceiver = true;
}
-+static const struct dwc2_core_params params_cns3xxx = {
-+ .otg_cap = 2, /* non-HNP/non-SRP capable */
-+ .otg_ver = 0, /* 1.3 */
-+ .dma_enable = 1,
-+ .dma_desc_enable = 0,
-+ .speed = 0, /* High Speed */
-+ .enable_dynamic_fifo = 1,
-+ .en_multiple_tx_fifo = 1,
-+ .host_rx_fifo_size = 658, /* 774 DWORDs */
-+ .host_nperio_tx_fifo_size = 128, /* 256 DWORDs */
-+ .host_perio_tx_fifo_size = 658, /* 512 DWORDs */
-+ .max_transfer_size = 65535,
-+ .max_packet_count = 511,
-+ .host_channels = 16,
-+ .phy_type = 1, /* UTMI */
-+ .phy_utmi_width = 16, /* 8 bits */
-+ .phy_ulpi_ddr = 0, /* Single */
-+ .phy_ulpi_ext_vbus = 0,
-+ .i2c_enable = 0,
-+ .ulpi_fs_ls = 0,
-+ .host_support_fs_ls_low_power = 0,
-+ .host_ls_low_power_phy_clk = 0, /* 48 MHz */
-+ .ts_dline = 0,
-+ .reload_ctl = 0,
-+ .ahbcfg = 0x10,
-+ .uframe_sched = 0,
-+};
++static void dwc2_set_cns3xxx_params(struct dwc2_hsotg *hsotg)
++{
++ struct dwc2_core_params *p = &hsotg->params;
+
- /**
- * dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources
- * @hsotg: The driver state
-@@ -552,6 +580,9 @@ static int dwc2_driver_probe(struct plat
- /* Default all params to autodetect */
- dwc2_set_all_params(&defparams, -1);
- params = &defparams;
-+#ifdef CONFIG_ARCH_CNS3XXX
-+ params = ¶ms_cns3xxx;
-+#endif
++ p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE; /* non-HNP/non-SRP capable */
++ p->host_dma = 1;
++ p->dma_desc_enable = 0;
++ p->speed = DWC2_SPEED_PARAM_HIGH; /* High Speed */
++ p->enable_dynamic_fifo = 1;
++ p->en_multiple_tx_fifo = 1;
++ p->host_rx_fifo_size = 658; /* 774 DWORDs */
++ p->host_nperio_tx_fifo_size = 128; /* 256 DWORDs */
++ p->host_perio_tx_fifo_size = 658; /* 512 DWORDs */
++ p->max_transfer_size = 65535,
++ p->max_packet_count = 511;
++ p->host_channels = 16;
++ p->phy_type = DWC2_PHY_TYPE_PARAM_UTMI; /* UTMI */
++ p->phy_utmi_width = 16; /* 8 bits */
++ p->phy_ulpi_ddr = 0; /* Single */
++ p->phy_ulpi_ext_vbus = 0;
++ p->i2c_enable = 0;
++ p->ulpi_fs_ls = 0;
++ p->host_support_fs_ls_low_power = 0;
++ p->host_ls_low_power_phy_clk = 0; /* 48 MHz */
++ p->ts_dline = 0;
++ p->reload_ctl = 0;
++ p->ahbcfg = 0x10;
++ p->uframe_sched = false;
++}
++
+ const struct of_device_id dwc2_of_match_table[] = {
+ { .compatible = "brcm,bcm2835-usb", .data = dwc2_set_bcm_params },
+ { .compatible = "hisilicon,hi6220-usb", .data = dwc2_set_his_params },
+@@ -710,17 +740,23 @@ int dwc2_get_hwparams(struct dwc2_hsotg
+
+ int dwc2_init_params(struct dwc2_hsotg *hsotg)
+ {
++ /*
+ const struct of_device_id *match;
+ void (*set_params)(void *data);
++ */
+
+ dwc2_set_default_params(hsotg);
+ dwc2_get_device_properties(hsotg);
+
++ /*
+ match = of_match_device(dwc2_of_match_table, hsotg->dev);
+ if (match && match->data) {
+ set_params = match->data;
+ set_params(hsotg);
+ }
++ */
++
++ dwc2_set_cns3xxx_params(hsotg);
+
+ dwc2_check_params(hsotg);
- /*
- * Disable descriptor dma mode by default as the HW can support
More information about the lede-commits
mailing list