[openwrt/openwrt] ar71xx: add support for GL.iNet GL-AR750
LEDE Commits
lede-commits at lists.infradead.org
Sun Jan 14 15:14:33 PST 2018
pepe2k pushed a commit to openwrt/openwrt.git, branch master:
https://git.lede-project.org/2e5252d346e2ec832a203af778b5c1d949f0ae5f
commit 2e5252d346e2ec832a203af778b5c1d949f0ae5f
Author: Piotr Dymacz <pepe2k at gmail.com>
AuthorDate: Tue Oct 17 23:30:01 2017 +0200
ar71xx: add support for GL.iNet GL-AR750
GL.iNet GL-AR750 is a small size, dual-band (AC750) router, based on
Qualcomm/Atheros QCA9531 v2 + QCA9887. FCC ID: 2AFIW-AR750.
Specification:
- 650/597/216 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 3x 10/100 Mbps Ethernet
- 2T2R 2.4 GHz (QCA9531)
- 1T1R 5 GHz (QCA9887)
- 1x USB 2.0 (power controlled by GPIO)
- 1x microSD (GL857L)
- 3x LED (all driven by GPIO)
- 1x button (reset)
- 1x 2-pos switch
- header for optional PoE module
- 1x micro USB for main power input
- UART + I2C header on PCB
Flash instruction:
Vendor firmware is based on OpenWrt/LEDE. GUI or sysupgrade can be used
to flash OpenWrt/LEDE firmware.
Signed-off-by: Piotr Dymacz <pepe2k at gmail.com>
---
target/linux/ar71xx/base-files/etc/board.d/01_leds | 4 +
.../linux/ar71xx/base-files/etc/board.d/02_network | 11 +-
target/linux/ar71xx/base-files/etc/diag.sh | 4 +-
.../etc/hotplug.d/firmware/11-ath10k-caldata | 9 +-
target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
.../lib/preinit/05_set_preinit_iface_ar71xx | 1 +
.../ar71xx/base-files/lib/upgrade/platform.sh | 1 +
target/linux/ar71xx/config-4.4 | 1 +
target/linux/ar71xx/config-4.9 | 1 +
.../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 11 ++
target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 +
.../ar71xx/files/arch/mips/ath79/mach-gl-ar750.c | 146 +++++++++++++++++++++
.../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 +
target/linux/ar71xx/generic/config-default | 1 +
target/linux/ar71xx/image/generic.mk | 13 ++
15 files changed, 198 insertions(+), 10 deletions(-)
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index f39109a..fac9dfa 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -407,6 +407,10 @@ dlan-pro-1200-ac)
gl-ar300m)
ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt"
;;
+gl-ar750)
+ ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:white:wlan2g" "phy1tpt"
+ ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:white:wlan5g" "phy0tpt"
+ ;;
gl-mifi)
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 6a338ae..558b038 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -390,6 +390,12 @@ ar71xx_setup_interfaces()
ucidef_add_switch "switch0" \
"0 at eth1" "1:lan" "2:lan" "3:lan" "4:lan"
;;
+ gl-ar750|\
+ rb-435g)
+ ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
+ ucidef_add_switch "switch0" \
+ "0 at eth1" "1:lan" "2:lan"
+ ;;
jwap230)
ucidef_set_interfaces_lan_wan "eth0.1" "eth1.2"
ucidef_add_switch "switch0" \
@@ -402,11 +408,6 @@ ar71xx_setup_interfaces()
onion-omega)
ucidef_set_interface_lan "wlan0"
;;
- rb-435g)
- ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
- ucidef_add_switch "switch0" \
- "0 at eth1" "1:lan" "2:lan"
- ;;
rb-450)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ucidef_add_switch "switch0" \
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 00ddeea..2720288 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -210,6 +210,7 @@ get_status_led() {
esr1750)
status_led="$board:amber:power"
;;
+ gl-ar750|\
hiveap-121|\
nbg6716)
status_led="$board:white:power"
@@ -527,7 +528,8 @@ set_state() {
done)
status_led_on
case $(board_name) in
- gl-ar300m)
+ gl-ar300m|\
+ gl-ar750)
fw_printenv lc >/dev/null 2>&1 && fw_setenv "bootcount" 0
;;
qihoo-c301)
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index d7d99f8..1876b00 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -89,6 +89,11 @@ case "$FIRMWARE" in
ath10kcal_extract "caldata" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
;;
+ gl-ar750|\
+ tl-wpa8630)
+ ath10kcal_extract "art" 20480 2116
+ ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
+ ;;
mc-mac1200r)
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1)
@@ -105,10 +110,6 @@ case "$FIRMWARE" in
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
;;
- tl-wpa8630)
- ath10kcal_extract "art" 20480 2116
- ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
- ;;
unifiac-lite|\
unifiac-pro)
ath10kcal_extract "EEPROM" 20480 2116
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index d62dff5..d2c68fb 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -673,6 +673,9 @@ ar71xx_board_detect() {
*"GL-AR300M")
name="gl-ar300m"
;;
+ *"GL-AR750")
+ name="gl-ar750"
+ ;;
*"GL-CONNECT INET v1")
name="gl-inet"
diff --git a/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx b/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx
index ece961e..909e615 100644
--- a/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx
+++ b/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx
@@ -17,6 +17,7 @@ set_preinit_iface() {
archer-c7|\
bhr-4grv2|\
dir-505-a1|\
+ gl-ar750|\
gl-inet|\
jwap003|\
pb42|\
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 108c90b..2231069 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -242,6 +242,7 @@ platform_check_image() {
gl-ar150|\
gl-ar300m|\
gl-ar300|\
+ gl-ar750|\
gl-domino|\
gl-mifi|\
gl-usb150|\
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index 44303f1..8ecf7e1 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -114,6 +114,7 @@ CONFIG_ATH79=y
# CONFIG_ATH79_MACH_GL_AR150 is not set
# CONFIG_ATH79_MACH_GL_AR300 is not set
# CONFIG_ATH79_MACH_GL_AR300M is not set
+# CONFIG_ATH79_MACH_GL_AR750 is not set
# CONFIG_ATH79_MACH_GL_DOMINO is not set
# CONFIG_ATH79_MACH_GL_INET is not set
# CONFIG_ATH79_MACH_GL_MIFI is not set
diff --git a/target/linux/ar71xx/config-4.9 b/target/linux/ar71xx/config-4.9
index 1e4b3ab..0e224ae 100644
--- a/target/linux/ar71xx/config-4.9
+++ b/target/linux/ar71xx/config-4.9
@@ -112,6 +112,7 @@ CONFIG_ATH79=y
# CONFIG_ATH79_MACH_GL_AR150 is not set
# CONFIG_ATH79_MACH_GL_AR300 is not set
# CONFIG_ATH79_MACH_GL_AR300M is not set
+# CONFIG_ATH79_MACH_GL_AR750 is not set
# CONFIG_ATH79_MACH_GL_DOMINO is not set
# CONFIG_ATH79_MACH_GL_INET is not set
# CONFIG_ATH79_MACH_GL_MIFI is not set
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index dae68d0..3ca7755 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -770,6 +770,17 @@ config ATH79_MACH_GL_AR300M
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_GL_AR750
+ bool "GL.iNet GL-AR750 support"
+ select SOC_QCA953X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_GL_DOMINO
bool "DOMINO support"
select SOC_AR933X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index b7caa5a..e9f4d98 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -122,6 +122,7 @@ obj-$(CONFIG_ATH79_MACH_FRITZ300E) += mach-fritz300e.o
obj-$(CONFIG_ATH79_MACH_GL_AR150) += mach-gl-ar150.o
obj-$(CONFIG_ATH79_MACH_GL_AR300) += mach-gl-ar300.o
obj-$(CONFIG_ATH79_MACH_GL_AR300M) += mach-gl-ar300m.o
+obj-$(CONFIG_ATH79_MACH_GL_AR750) += mach-gl-ar750.o
obj-$(CONFIG_ATH79_MACH_GL_DOMINO) += mach-gl-domino.o
obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o
obj-$(CONFIG_ATH79_MACH_GL_MIFI) += mach-gl-mifi.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar750.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar750.c
new file mode 100644
index 0000000..9ee6e29
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar750.c
@@ -0,0 +1,146 @@
+/*
+ * GL.iNet GL-AR750 board support
+ *
+ * Copyright (C) 2018 Piotr Dymacz <pepe2k at gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define GL_AR750_GPIO_LED_POWER 12
+#define GL_AR750_GPIO_LED_WLAN2G 14
+#define GL_AR750_GPIO_LED_WLAN5G 13
+
+#define GL_AR750_GPIO_BTN_RESET 3
+#define GL_AR750_GPIO_BTN_SW1 0
+
+#define GL_AR750_GPIO_I2C_SCL 16
+#define GL_AR750_GPIO_I2C_SDA 17
+
+#define GL_AR750_GPIO_USB_POWER 2
+
+#define GL_AR750_KEYS_POLL_INTERVAL 20
+#define GL_AR750_KEYS_DEBOUNCE_INTERVAL (3 * GL_AR750_KEYS_POLL_INTERVAL)
+
+#define GL_AR750_MAC0_OFFSET 0
+#define GL_AR750_WMAC2G_CALDATA_OFFSET 0x1000
+#define GL_AR750_WMAC5G_CALDATA_OFFSET 0x5000
+
+static struct gpio_led gl_ar750_leds_gpio[] __initdata = {
+ {
+ .name = "gl-ar750:white:power",
+ .gpio = GL_AR750_GPIO_LED_POWER,
+ .default_state = LEDS_GPIO_DEFSTATE_KEEP,
+ .active_low = 1,
+ }, {
+ .name = "gl-ar750:white:wlan2g",
+ .gpio = GL_AR750_GPIO_LED_WLAN2G,
+ .active_low = 1,
+ }, {
+ .name = "gl-ar750:white:wlan5g",
+ .gpio = GL_AR750_GPIO_LED_WLAN5G,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button gl_ar750_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = GL_AR750_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = GL_AR750_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "sw1",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .debounce_interval = GL_AR750_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = GL_AR750_GPIO_BTN_SW1,
+ .active_low = 1,
+ },
+};
+
+static struct i2c_gpio_platform_data gl_ar750_i2c_gpio_data = {
+ .sda_pin = GL_AR750_GPIO_I2C_SDA,
+ .scl_pin = GL_AR750_GPIO_I2C_SCL,
+};
+
+static struct platform_device gl_ar750_i2c_gpio = {
+ .name = "i2c-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &gl_ar750_i2c_gpio_data,
+ },
+};
+
+static void __init gl_ar750_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1f050000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_setup_ar933x_phy4_switch(false, false);
+ ath79_register_mdio(0, 0x0);
+
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_switch_data.phy_poll_mask = 0xfc;
+
+ /* WAN */
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_init_mac(ath79_eth0_data.mac_addr, art + GL_AR750_MAC0_OFFSET, 0);
+ ath79_register_eth(0);
+
+ /* LAN */
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_init_mac(ath79_eth1_data.mac_addr, art + GL_AR750_MAC0_OFFSET, 1);
+ ath79_register_eth(1);
+
+ /* Disable JTAG (enables GPIO0-3) */
+ ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_ar750_leds_gpio),
+ gl_ar750_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, GL_AR750_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(gl_ar750_gpio_keys),
+ gl_ar750_gpio_keys);
+
+ gpio_request_one(GL_AR750_GPIO_USB_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+
+ platform_device_register(&gl_ar750_i2c_gpio);
+
+ ath79_register_usb();
+
+ ath79_register_wmac(art + GL_AR750_WMAC2G_CALDATA_OFFSET, NULL);
+
+ ap91_pci_init(art + GL_AR750_WMAC5G_CALDATA_OFFSET, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_GL_AR750, "GL-AR750", "GL.iNet GL-AR750",
+ gl_ar750_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 4afda05..1a2c038 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -114,6 +114,7 @@ enum ath79_mach_type {
ATH79_MACH_GL_AR150, /* GL-AR150 support */
ATH79_MACH_GL_AR300, /* GL-AR300 */
ATH79_MACH_GL_AR300M, /* GL-AR300M */
+ ATH79_MACH_GL_AR750, /* GL.iNet GL-AR750 */
ATH79_MACH_GL_DOMINO, /* Domino */
ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */
ATH79_MACH_GL_MIFI, /* GL-MIFI support */
diff --git a/target/linux/ar71xx/generic/config-default b/target/linux/ar71xx/generic/config-default
index 06d5223..cac1a27 100644
--- a/target/linux/ar71xx/generic/config-default
+++ b/target/linux/ar71xx/generic/config-default
@@ -85,6 +85,7 @@ CONFIG_ATH79_MACH_FRITZ300E=y
CONFIG_ATH79_MACH_GL_AR150=y
CONFIG_ATH79_MACH_GL_AR300=y
CONFIG_ATH79_MACH_GL_AR300M=y
+CONFIG_ATH79_MACH_GL_AR750=y
CONFIG_ATH79_MACH_GL_DOMINO=y
CONFIG_ATH79_MACH_GL_INET=y
CONFIG_ATH79_MACH_GL_MIFI=y
diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk
index 65a7eb7..88b9f93 100644
--- a/target/linux/ar71xx/image/generic.mk
+++ b/target/linux/ar71xx/image/generic.mk
@@ -330,6 +330,19 @@ define Device/gl-ar300m
endef
TARGET_DEVICES += gl-ar300m
+define Device/gl-ar750
+ DEVICE_TITLE := GL.iNet GL-AR750
+ DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca9887 kmod-usb-core \
+ kmod-usb2 kmod-usb-storage
+ BOARDNAME := GL-AR750
+ SUPPORTED_DEVICES := gl-ar750
+ IMAGE_SIZE := 16000k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware)
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += gl-ar750
+
define Device/gl-domino
DEVICE_TITLE := GL.iNet Domino Pi
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
More information about the lede-commits
mailing list