[openwrt/openwrt] ipq806x: Sort occurrences of boardame alphabetically
LEDE Commits
lede-commits at lists.infradead.org
Fri Jan 12 22:56:17 PST 2018
mkresin pushed a commit to openwrt/openwrt.git, branch master:
https://git.lede-project.org/7293499f719d73ffaeb61011d077e84d309b0f25
commit 7293499f719d73ffaeb61011d077e84d309b0f25
Author: Luis Araneda <luaraneda at gmail.com>
AuthorDate: Fri Jan 5 10:11:16 2018 -0300
ipq806x: Sort occurrences of boardame alphabetically
This restores the alphabetical sort that was present
before the renaming of boardname.
Signed-off-by: Luis Araneda <luaraneda at gmail.com>
---
package/boot/uboot-envtools/files/ipq | 6 +-
.../linux/ipq806x/base-files/etc/board.d/01_leds | 28 +--
.../ipq806x/base-files/etc/board.d/02_network | 29 ++-
.../etc/hotplug.d/firmware/11-ath10k-caldata | 48 ++---
.../etc/hotplug.d/ieee80211/10_fix_wifi_mac | 14 +-
.../ipq806x/base-files/lib/upgrade/platform.sh | 6 +-
target/linux/ipq806x/image/Makefile | 214 ++++++++++-----------
7 files changed, 172 insertions(+), 173 deletions(-)
diff --git a/package/boot/uboot-envtools/files/ipq b/package/boot/uboot-envtools/files/ipq
index c3ec01e..4618aac 100644
--- a/package/boot/uboot-envtools/files/ipq
+++ b/package/boot/uboot-envtools/files/ipq
@@ -31,13 +31,13 @@ ubootenv_mtdinfo () {
}
case "$board" in
+linksys,ea8500)
+ ubootenv_add_uci_config "/dev/mtd10" "0x0" "0x20000" "0x20000"
+ ;;
qcom,ipq8064-ap148 |\
qcom,ipq8064-db149)
ubootenv_add_uci_config $(ubootenv_mtdinfo)
;;
-linksys,ea8500)
- ubootenv_add_uci_config "/dev/mtd10" "0x0" "0x20000" "0x20000"
- ;;
zyxel,nbg6817)
ubootenv_add_uci_config "/dev/mtdblock9" "0x0" "0x10000" "0x10000"
;;
diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds b/target/linux/ipq806x/base-files/etc/board.d/01_leds
index f0b087f..b04832f 100755
--- a/target/linux/ipq806x/base-files/etc/board.d/01_leds
+++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds
@@ -11,11 +11,10 @@ board=$(board_name)
boardname="${board##*,}"
case "$board" in
-tplink,c2600)
- ucidef_set_led_usbport "usb1" "USB 1" "${boardname}:white:usb_2" "usb1-port1" "usb2-port1"
- ucidef_set_led_usbport "usb2" "USB 2" "${boardname}:white:usb_4" "usb3-port1" "usb4-port1"
- ucidef_set_led_switch "wan" "wan" "${boardname}:white:wan" "switch0" "0x20"
- ucidef_set_led_switch "lan" "lan" "${boardname}:white:lan" "switch0" "0x1e"
+avm,fritzbox-4040)
+ ucidef_set_led_wlan "wlan" "WLAN" "fritz4040:green:wlan" "phy0tpt" "phy1tpt"
+ ucidef_set_led_netdev "wan" "WAN" "fritz4040:green:wan" "eth1"
+ ucidef_set_led_switch "lan" "LAN" "fritz4040:green:lan" "switch0" "0x1e"
;;
netgear,d7800 |\
netgear,r7500 |\
@@ -26,15 +25,11 @@ netgear,r7800)
ucidef_set_led_netdev "wan" "WAN" "${boardname}:white:wan" "eth0"
ucidef_set_led_ide "esata" "eSATA" "${boardname}:white:esata"
;;
-avm,fritzbox-4040)
- ucidef_set_led_wlan "wlan" "WLAN" "fritz4040:green:wlan" "phy0tpt" "phy1tpt"
- ucidef_set_led_netdev "wan" "WAN" "fritz4040:green:wan" "eth1"
- ucidef_set_led_switch "lan" "LAN" "fritz4040:green:lan" "switch0" "0x1e"
- ;;
-zyxel,nbg6817)
- ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:amber:wifi2g" "phy1tpt"
- ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:amber:wifi5g" "phy0tpt"
- ucidef_set_led_netdev "wan" "WAN" "${boardname}:white:internet" "eth1"
+tplink,c2600)
+ ucidef_set_led_usbport "usb1" "USB 1" "${boardname}:white:usb_2" "usb1-port1" "usb2-port1"
+ ucidef_set_led_usbport "usb2" "USB 2" "${boardname}:white:usb_4" "usb3-port1" "usb4-port1"
+ ucidef_set_led_switch "wan" "wan" "${boardname}:white:wan" "switch0" "0x20"
+ ucidef_set_led_switch "lan" "lan" "${boardname}:white:lan" "switch0" "0x1e"
;;
tplink,vr2600v)
ucidef_set_led_usbport "usb" "USB" "${boardname}:white:usb" "usb1-port1" "usb2-port1" "usb3-port1" "usb4-port1"
@@ -43,6 +38,11 @@ tplink,vr2600v)
ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:white:wlan5g" "phy1tpt"
ucidef_set_led_switch "wan" "wan" "${boardname}:white:wan" "switch0" "0x20"
;;
+zyxel,nbg6817)
+ ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:amber:wifi2g" "phy1tpt"
+ ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:amber:wifi5g" "phy0tpt"
+ ucidef_set_led_netdev "wan" "WAN" "${boardname}:white:internet" "eth1"
+ ;;
*)
;;
esac
diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network
index 8854b9c..74a38ee 100755
--- a/target/linux/ipq806x/base-files/etc/board.d/02_network
+++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
@@ -12,6 +12,18 @@ board_config_update
board=$(board_name)
case "$board" in
+avm,fritzbox-4040)
+ ucidef_set_interfaces_lan_wan "eth0" "eth1"
+ ucidef_add_switch "switch0" \
+ "0 at eth0" "1:lan" "2:lan" "3:lan" "4:lan"
+ ;;
+linksys,ea8500)
+ hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+ ucidef_add_switch "switch0" \
+ "0 at eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
+ ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
+ ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
+ ;;
netgear,d7800 |\
netgear,r7500 |\
netgear,r7500v2 |\
@@ -21,27 +33,14 @@ tplink,vr2600v)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "6 at eth1" "5:wan" "0 at eth0"
;;
-tplink,c2600)
- ucidef_add_switch "switch0" \
- "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6 at eth1" "5:wan" "0 at eth0"
- ;;
qcom,ipq8064-db149)
ucidef_set_interface_lan "eth1 eth2 eth3"
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "6u at eth1" "5:wan" "0u at eth0"
;;
-linksys,ea8500)
-
- hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
- ucidef_add_switch "switch0" \
- "0 at eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
- ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
- ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
- ;;
-avm,fritzbox-4040)
- ucidef_set_interfaces_lan_wan "eth0" "eth1"
+tplink,c2600)
ucidef_add_switch "switch0" \
- "0 at eth0" "1:lan" "2:lan" "3:lan" "4:lan"
+ "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6 at eth1" "5:wan" "0 at eth0"
;;
zyxel,nbg6817)
hw_mac_addr=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index dc74df8..4aaa923 100644
--- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -47,69 +47,69 @@ board=$(board_name)
case "$FIRMWARE" in
"ath10k/pre-cal-ahb-a000000.wifi.bin")
case "$board" in
- qcom,ap-dk01.1-c1)
- ath10kcal_extract "ART" 4096 12064
- ;;
avm,fritzbox-4040)
/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
;;
+ qcom,ap-dk01.1-c1)
+ ath10kcal_extract "ART" 4096 12064
+ ;;
esac
;;
"ath10k/pre-cal-ahb-a800000.wifi.bin")
case "$board" in
- qcom,ap-dk01.1-c1)
- ath10kcal_extract "ART" 20480 12064
- ;;
avm,fritzbox-4040)
/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
;;
+ qcom,ap-dk01.1-c1)
+ ath10kcal_extract "ART" 20480 12064
+ ;;
esac
;;
"ath10k/pre-cal-pci-0000:01:00.0.bin")
case $board in
- tplink,c2600)
- ath10kcal_extract "radio" 4096 12064
-# ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -1)
+ linksys,ea8500)
+ hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+ ath10kcal_extract "art" 4096 12064
;;
netgear,d7800 |\
netgear,r7500v2 |\
netgear,r7800)
ath10kcal_extract "art" 4096 12064
;;
- linksys,ea8500)
- hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
- ath10kcal_extract "art" 4096 12064
- ;;
- zyxel,nbg6817)
- ath10kcal_extract "0:ART" 4096 12064
+ tplink,c2600)
+ ath10kcal_extract "radio" 4096 12064
+# ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -1)
;;
tplink,vr2600v)
ath10kcal_extract "ART" 4096 12064
;;
+ zyxel,nbg6817)
+ ath10kcal_extract "0:ART" 4096 12064
+ ;;
esac
;;
"ath10k/pre-cal-pci-0001:01:00.0.bin")
case $board in
- tplink,c2600)
- ath10kcal_extract "radio" 20480 12064
-# ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -2)
+ linksys,ea8500)
+ hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+ ath10kcal_extract "art" 20480 12064
;;
netgear,d7800 |\
netgear,r7500v2 |\
netgear,r7800)
ath10kcal_extract "art" 20480 12064
;;
- linksys,ea8500)
- hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
- ath10kcal_extract "art" 20480 12064
- ;;
- zyxel,nbg6817)
- ath10kcal_extract "0:ART" 20480 12064
+ tplink,c2600)
+ ath10kcal_extract "radio" 20480 12064
+# ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -2)
;;
tplink,vr2600v)
ath10kcal_extract "ART" 20480 12064
;;
+ zyxel,nbg6817)
+ ath10kcal_extract "0:ART" 20480 12064
+ ;;
esac
;;
*)
diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index 2077110..7e31c38 100644
--- a/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -12,23 +12,23 @@ PHYNBR=${DEVPATH##*/phy}
board=$(board_name)
case "$board" in
- tplink,c2600)
- echo $(macaddr_add $(mtd_get_mac_binary default-mac 8) $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress
+ linksys,ea8500)
+ echo $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) $(($PHYNBR + 1)) ) > /sys${DEVPATH}/macaddress
;;
netgear,d7800 |\
netgear,r7500v2 |\
netgear,r7800)
echo $(macaddr_add $(mtd_get_mac_binary art 6) $(($PHYNBR + 1)) ) > /sys${DEVPATH}/macaddress
;;
- linksys,ea8500)
- echo $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) $(($PHYNBR + 1)) ) > /sys${DEVPATH}/macaddress
- ;;
- zyxel,nbg6817)
- echo $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) $((1 - $PHYNBR)) ) > /sys${DEVPATH}/macaddress
+ tplink,c2600)
+ echo $(macaddr_add $(mtd_get_mac_binary default-mac 8) $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress
;;
tplink,vr2600v)
echo $(macaddr_add $(mtd_get_mac_binary default-mac 0) $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress
;;
+ zyxel,nbg6817)
+ echo $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) $((1 - $PHYNBR)) ) > /sys${DEVPATH}/macaddress
+ ;;
*)
;;
esac
diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
index dc88c9e..f71ee37 100644
--- a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
@@ -10,6 +10,9 @@ platform_check_image() {
platform_do_upgrade() {
case "$(board_name)" in
+ linksys,ea8500)
+ platform_do_upgrade_linksys "$ARGV"
+ ;;
netgear,d7800 |\
netgear,r7500 |\
netgear,r7500v2 |\
@@ -24,9 +27,6 @@ platform_do_upgrade() {
MTD_CONFIG_ARGS="-s 0x200000"
default_do_upgrade "$ARGV"
;;
- linksys,ea8500)
- platform_do_upgrade_linksys "$ARGV"
- ;;
tplink,vr2600v)
PART_NAME="kernel:rootfs"
MTD_CONFIG_ARGS="-s 0x200000"
diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile
index f28f4a3..e8182e8 100644
--- a/target/linux/ipq806x/image/Makefile
+++ b/target/linux/ipq806x/image/Makefile
@@ -98,70 +98,20 @@ define Device/ZyXELImage
IMAGE/mmcblk0p4-kernel.bin := append-kernel
endef
-define Device/qcom_ipq8064-ap148
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_DTS := qcom-ipq8064-ap148
- KERNEL_INSTALL := 1
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- BOARD_NAME := ap148
- SUPPORTED_DEVICES += ap148
- DEVICE_TITLE := Qualcomm AP148
- DEVICE_PACKAGES := ath10k-firmware-qca99x0
-endef
-TARGET_DEVICES += qcom_ipq8064-ap148
-
-define Device/qcom_ipq8064-ap148-legacy
- $(call Device/LegacyImage)
- $(call Device/UbiFit)
- DEVICE_DTS := qcom-ipq8064-ap148
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- BOARD_NAME := ap148
- SUPPORTED_DEVICES := qcom,ipq8064-ap148 ap148
- DEVICE_TITLE := Qualcomm AP148 (legacy)
- DEVICE_PACKAGES := ath10k-firmware-qca99x0
-endef
-TARGET_DEVICES += qcom_ipq8064-ap148-legacy
-
-define Device/tplink_c2600
- $(call Device/TpSafeImage)
- DEVICE_DTS := qcom-ipq8064-c2600
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- BOARD_NAME := c2600
- SUPPORTED_DEVICES += c2600
- TPLINK_BOARD_ID := C2600
- DEVICE_TITLE := TP-Link Archer C2600
- DEVICE_PACKAGES := ath10k-firmware-qca99x0
-endef
-TARGET_DEVICES += tplink_c2600
-
-define Device/netgear_d7800
- $(call Device/DniImage)
- DEVICE_DTS := qcom-ipq8064-d7800
- KERNEL_SIZE := 2097152
- NETGEAR_BOARD_ID := D7800
- NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- BOARD_NAME := d7800
- SUPPORTED_DEVICES += d7800
- DEVICE_TITLE := Netgear Nighthawk X4 D7800
- DEVICE_PACKAGES := ath10k-firmware-qca99x0
-endef
-TARGET_DEVICES += netgear_d7800
-
-define Device/qcom_ipq8064-db149
- $(call Device/FitImage)
- DEVICE_DTS := qcom-ipq8064-db149
- KERNEL_INSTALL := 1
- BOARD_NAME := db149
- DEVICE_TITLE := Qualcomm DB149
- DEVICE_PACKAGES := ath10k-firmware-qca99x0
+define Device/avm_fritzbox-4040
+ $(call Device/FitImageLzma)
+ DEVICE_DTS := qcom-ipq4019-fritz4040
+ KERNEL_LOADADDR := 0x80208000
+ BLOCKSIZE := 4k
+ PAGESIZE := 256
+ BOARD_NAME := fritz4040
+ DEVICE_TITLE := AVM Fritz!Box 4040
+ IMAGE_SIZE := 29753344
+ IMAGES = sysupgrade.bin
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+ DEVICE_PACKAGES := kmod-usb-phy-qcom-ipq4019 ipq-wifi-fritz4040 fritz-tffs fritz-caldata u-boot-fritz4040
endef
-TARGET_DEVICES += qcom_ipq8064-db149
+TARGET_DEVICES += avm_fritzbox-4040
define Device/linksys_ea8500
$(call Device/LegacyImage)
@@ -182,20 +132,20 @@ define Device/linksys_ea8500
endef
TARGET_DEVICES += linksys_ea8500
-define Device/avm_fritzbox-4040
- $(call Device/FitImageLzma)
- DEVICE_DTS := qcom-ipq4019-fritz4040
- KERNEL_LOADADDR := 0x80208000
- BLOCKSIZE := 4k
- PAGESIZE := 256
- BOARD_NAME := fritz4040
- DEVICE_TITLE := AVM Fritz!Box 4040
- IMAGE_SIZE := 29753344
- IMAGES = sysupgrade.bin
- IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
- DEVICE_PACKAGES := kmod-usb-phy-qcom-ipq4019 ipq-wifi-fritz4040 fritz-tffs fritz-caldata u-boot-fritz4040
+define Device/netgear_d7800
+ $(call Device/DniImage)
+ DEVICE_DTS := qcom-ipq8064-d7800
+ KERNEL_SIZE := 2097152
+ NETGEAR_BOARD_ID := D7800
+ NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ BOARD_NAME := d7800
+ SUPPORTED_DEVICES += d7800
+ DEVICE_TITLE := Netgear Nighthawk X4 D7800
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0
endef
-TARGET_DEVICES += avm_fritzbox-4040
+TARGET_DEVICES += netgear_d7800
define Device/netgear_r7500
$(call Device/DniImage)
@@ -242,37 +192,6 @@ define Device/netgear_r7800
endef
TARGET_DEVICES += netgear_r7800
-define Device/zyxel_nbg6817
- DEVICE_DTS := qcom-ipq8065-nbg6817
- KERNEL_SIZE := 4096k
- BLOCKSIZE := 64k
- BOARD_NAME := nbg6817
- SUPPORTED_DEVICES += nbg6817
- DEVICE_TITLE := ZyXEL NBG6817
- DEVICE_PACKAGES := ath10k-firmware-qca9984 e2fsprogs kmod-fs-ext4 losetup
- $(call Device/ZyXELImage)
-endef
-TARGET_DEVICES += zyxel_nbg6817
-
-define Device/tplink_vr2600v
- PROFILES += $$(DEVICE_NAME)
- FILESYSTEMS := squashfs
- KERNEL_SUFFIX := -uImage
- KERNEL = kernel-bin | append-dtb | uImage none
- KERNEL_NAME := zImage
- KERNEL_SIZE := 2097152
- DEVICE_DTS := qcom-ipq8064-vr2600v
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- BOARD_NAME := vr2600v
- SUPPORTED_DEVICES += vr2600v
- DEVICE_TITLE := TP-Link Archer VR2600v
- DEVICE_PACKAGES := ath10k-firmware-qca99x0
- IMAGES := sysupgrade.bin
- IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
-endef
-TARGET_DEVICES += tplink_vr2600v
-
define Device/qcom_ap-dk01.1-c1
PROFILES += $$(DEVICE_NAME)
DEVICE_TITLE := QCA AP-DK01.1-C1
@@ -304,4 +223,85 @@ define Device/qcom_ap-dk04.1-c1
endef
TARGET_DEVICES += qcom_ap-dk04.1-c1
+define Device/qcom_ipq8064-ap148
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ DEVICE_DTS := qcom-ipq8064-ap148
+ KERNEL_INSTALL := 1
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ BOARD_NAME := ap148
+ SUPPORTED_DEVICES += ap148
+ DEVICE_TITLE := Qualcomm AP148
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0
+endef
+TARGET_DEVICES += qcom_ipq8064-ap148
+
+define Device/qcom_ipq8064-ap148-legacy
+ $(call Device/LegacyImage)
+ $(call Device/UbiFit)
+ DEVICE_DTS := qcom-ipq8064-ap148
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ BOARD_NAME := ap148
+ SUPPORTED_DEVICES := qcom,ipq8064-ap148 ap148
+ DEVICE_TITLE := Qualcomm AP148 (legacy)
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0
+endef
+TARGET_DEVICES += qcom_ipq8064-ap148-legacy
+
+define Device/qcom_ipq8064-db149
+ $(call Device/FitImage)
+ DEVICE_DTS := qcom-ipq8064-db149
+ KERNEL_INSTALL := 1
+ BOARD_NAME := db149
+ DEVICE_TITLE := Qualcomm DB149
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0
+endef
+TARGET_DEVICES += qcom_ipq8064-db149
+
+define Device/tplink_c2600
+ $(call Device/TpSafeImage)
+ DEVICE_DTS := qcom-ipq8064-c2600
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ BOARD_NAME := c2600
+ SUPPORTED_DEVICES += c2600
+ TPLINK_BOARD_ID := C2600
+ DEVICE_TITLE := TP-Link Archer C2600
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0
+endef
+TARGET_DEVICES += tplink_c2600
+
+define Device/tplink_vr2600v
+ PROFILES += $$(DEVICE_NAME)
+ FILESYSTEMS := squashfs
+ KERNEL_SUFFIX := -uImage
+ KERNEL = kernel-bin | append-dtb | uImage none
+ KERNEL_NAME := zImage
+ KERNEL_SIZE := 2097152
+ DEVICE_DTS := qcom-ipq8064-vr2600v
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ BOARD_NAME := vr2600v
+ SUPPORTED_DEVICES += vr2600v
+ DEVICE_TITLE := TP-Link Archer VR2600v
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0
+ IMAGES := sysupgrade.bin
+ IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
+endef
+TARGET_DEVICES += tplink_vr2600v
+
+define Device/zyxel_nbg6817
+ DEVICE_DTS := qcom-ipq8065-nbg6817
+ KERNEL_SIZE := 4096k
+ BLOCKSIZE := 64k
+ BOARD_NAME := nbg6817
+ SUPPORTED_DEVICES += nbg6817
+ DEVICE_TITLE := ZyXEL NBG6817
+ DEVICE_PACKAGES := ath10k-firmware-qca9984 e2fsprogs kmod-fs-ext4 losetup
+ $(call Device/ZyXELImage)
+endef
+TARGET_DEVICES += zyxel_nbg6817
+
$(eval $(call BuildImage))
More information about the lede-commits
mailing list