[openwrt/openwrt] ipq806x: drop partitial supported boards
LEDE Commits
lede-commits at lists.infradead.org
Fri Jan 12 22:56:12 PST 2018
mkresin pushed a commit to openwrt/openwrt.git, branch master:
https://git.lede-project.org/c3d9fe96dc081f412a9d2adc4da5b7d3d2a45d5b
commit c3d9fe96dc081f412a9d2adc4da5b7d3d2a45d5b
Author: Mathias Kresin <dev at kresin.me>
AuthorDate: Mon Jan 8 23:24:44 2018 +0100
ipq806x: drop partitial supported boards
There are only artifacts for these boards in our tree and not even
partial support.
Drop teh stale files.
Signed-off-by: Mathias Kresin <dev at kresin.me>
---
package/firmware/ipq-wifi/Makefile | 4 +-
package/firmware/ipq-wifi/board-nbg6617.bin | Bin 24276 -> 0 bytes
package/firmware/ipq-wifi/board-rt-ac58u.bin | Bin 24276 -> 0 bytes
.../arch/arm/boot/dts/qcom-ipq4019-nbg6617.dts | 135 --------------
.../arch/arm/boot/dts/qcom-ipq4019-rt-ac58u.dts | 197 ---------------------
.../patches-4.9/0069-arm-boot-add-dts-files.patch | 4 +-
...ubi-add-quirk-to-autoload-ubi-on-rt-ac58u.patch | 29 ---
7 files changed, 2 insertions(+), 367 deletions(-)
diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile
index aec8bf2..95c5627 100644
--- a/package/firmware/ipq-wifi/Makefile
+++ b/package/firmware/ipq-wifi/Makefile
@@ -13,7 +13,7 @@ endef
define Build/Compile
endef
-ALLWIFIBOARDS:=rt-ac58u fritz4040 nbg6617
+ALLWIFIBOARDS:=fritz4040
ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD))
define Package/ipq-wifi-default
@@ -47,8 +47,6 @@ Don't install it for any other device!
PREV_BOARD+=ipq-wifi-$(1)
endef
-$(eval $(call generate-ipq-wifi-package,rt-ac58u,board-rt-ac58u.bin,ASUS RT-AC58U/RT-ACRH13))
$(eval $(call generate-ipq-wifi-package,fritz4040,board-fritz4040.bin,AVM FRITZBox 4040))
-$(eval $(call generate-ipq-wifi-package,nbg6617,board-nbg6617.bin,ZyXEL NBG6617))
$(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))
diff --git a/package/firmware/ipq-wifi/board-nbg6617.bin b/package/firmware/ipq-wifi/board-nbg6617.bin
deleted file mode 100644
index ab4d43e..0000000
Binary files a/package/firmware/ipq-wifi/board-nbg6617.bin and /dev/null differ
diff --git a/package/firmware/ipq-wifi/board-rt-ac58u.bin b/package/firmware/ipq-wifi/board-rt-ac58u.bin
deleted file mode 100644
index 379bdc8..0000000
Binary files a/package/firmware/ipq-wifi/board-rt-ac58u.bin and /dev/null differ
diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-nbg6617.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-nbg6617.dts
deleted file mode 100644
index a00dee7..0000000
--- a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-nbg6617.dts
+++ /dev/null
@@ -1,135 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019-ap.dk01.1.dtsi"
-#include "qcom-ipq4019-bus.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "ZyXEL NBG6617";
- compatible = "zyxel,nbg6617", "qcom,ipq4019";
-
- memory {
- device_type = "memory";
- reg = <0x80000000 0x10000000>;
- };
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
- };
-
- reserved-memory {
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- ranges;
-
- rsvd1 at 87000000 {
- reg = <0x87000000 0x0500000>;
- no-map;
- };
-
- wifi_dump at 87500000 {
- reg = <0x87500000 0x600000>;
- no-map;
- };
-
- rsvd2 at 87B00000 {
- reg = <0x87b00000 0x500000>;
- no-map;
- };
- };
-
- soc {
- pinctrl at 1000000 {
- led_pinmux {
- mux {
- pins = "gpio0", "gpio1", "gpio3", "gpio5", "gpio58";
- drive-strength = <0x8>;
- bias-pull-up;
- output-high;
- };
- };
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- wlan {
- label = "wlan";
- gpios = <&tlmm 0x2 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_RFKILL>;
- };
-
- wps {
- label = "wps";
- gpios = <&tlmm 0x3f GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- reset {
- label = "reset";
- gpios = <&tlmm 0x4 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- power: power {
- label = "nbg6617:green:power";
- gpios = <&tlmm 0x3 GPIO_ACTIVE_HIGH>;
- };
-
- wps {
- label = "nbg6617:green:wps";
- gpios = <&tlmm 0x1 GPIO_ACTIVE_HIGH>;
- };
-
- wlan2G {
- label = "nbg6617:green:wlan2G";
- gpios = <&tlmm 0x3a GPIO_ACTIVE_HIGH>;
- };
-
- wlan5G {
- label = "nbg6617:green:wlan5G";
- gpios = <&tlmm 0x5 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&spi_0 { /* BLSP1 QUP1 */
- n25q128a11 at 0 {
- status = "okay";
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition0 at 0 {
- label = "all";
- reg = <0x00000000 0x08000000>;
- read-only; /* for now */
- };
- };
- };
-};
diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-rt-ac58u.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-rt-ac58u.dts
deleted file mode 100644
index 6efd0df..0000000
--- a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-rt-ac58u.dts
+++ /dev/null
@@ -1,197 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019-ap.dk01.1.dtsi"
-#include "qcom-ipq4019-bus.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "ASUS RT-AC58U";
- compatible = "asus,rt-ac58u", "qcom,ipq4019";
-
- memory {
- device_type = "memory";
- reg = <0x80000000 0x8000000>;
- };
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
- };
-
- reserved-memory {
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- ranges;
-
- rsvd1 at 87E00000 {
- reg = <0x87e00000 0x200000>;
- no-map;
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- power: status {
- label = "rt-ac58u:blue:status";
- gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
- };
-
- wan {
- label = "rt-ac58u:blue:wan";
- gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
- };
-
- wlan2G {
- label = "rt-ac58u:blue:wlan2G";
- gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
- };
-
- wan5G {
- label = "rt-ac58u:blue:wlan5G";
- gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
- };
-
- usb {
- label = "rt-ac58u:blue:usb";
- gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
- };
-
- lan {
- label = "rt-ac58u:blue:lan";
- gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&spi_0_pins {
- pinmux_cs {
- function = "gpio";
- pins = "gpio54", "gpio59";
- };
- pinconf_cs {
- pins = "gpio54", "gpio59";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
-};
-
-&spi_0 { /* BLSP1 QUP1 */
- cs-gpios = <&tlmm 54 0>,
- <&tlmm 59 0>;
-
- m25p80 at 0 {
- #address-cells = <1>;
- #size-cells = <0>;
- /*
- * U-boot looks for "n25q128a11" node,
- * if we don't have it, it will spit out the following warning:
- * "ipq: fdt fixup unable to find compatible node".
- */
- compatible = "mx25l1606e", "n25q128a11";
- reg = <0>;
- linux,modalias = "m25p80", "mx25l1606e", "n25q128a11";
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition0 at 0 {
- label = "SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition1 at 40000 {
- label = "MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
- partition2 at 60000 {
- label = "QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
- partition3 at c0000 {
- label = "CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
- partition4 at d0000 {
- label = "DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
- partition5 at e0000 {
- label = "APPSBLENV"; /* uboot env*/
- reg = <0x000e0000 0x00010000>;
- read-only;
- };
- partition5 at f0000 {
- label = "APPSBL"; /* uboot */
- reg = <0x000f0000 0x00080000>;
- read-only;
- };
- partition5 at 170000 {
- label = "ART";
- reg = <0x00170000 0x00010000>;
- read-only;
- };
- /* 0x00180000 - 0x00200000 unused */
- };
- };
-
- mt29f at 1 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "spinand,mt29f", "w25n01gv";
- reg = <1>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition0 at 0 {
- label = "ubi";
- reg = <0x00000000 0x08000000>;
- };
- };
- };
-};
diff --git a/target/linux/ipq806x/patches-4.9/0069-arm-boot-add-dts-files.patch b/target/linux/ipq806x/patches-4.9/0069-arm-boot-add-dts-files.patch
index bab2808..a6c66d7 100644
--- a/target/linux/ipq806x/patches-4.9/0069-arm-boot-add-dts-files.patch
+++ b/target/linux/ipq806x/patches-4.9/0069-arm-boot-add-dts-files.patch
@@ -10,13 +10,11 @@ Signed-off-by: John Crispin <john at phrozen.org>
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -618,7 +618,18 @@ dtb-$(CONFIG_ARCH_QCOM) += \
+@@ -618,7 +618,16 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8084-mtp.dtb \
qcom-ipq4019-ap.dk01.1-c1.dtb \
qcom-ipq4019-ap.dk04.1-c1.dtb \
+ qcom-ipq4019-fritz4040.dtb \
-+ qcom-ipq4019-nbg6617.dtb \
-+ qcom-ipq4019-rt-ac58u.dtb \
qcom-ipq8064-ap148.dtb \
+ qcom-ipq8064-c2600.dtb \
+ qcom-ipq8064-d7800.dtb \
diff --git a/target/linux/ipq806x/patches-4.9/400-mtd-ubi-add-quirk-to-autoload-ubi-on-rt-ac58u.patch b/target/linux/ipq806x/patches-4.9/400-mtd-ubi-add-quirk-to-autoload-ubi-on-rt-ac58u.patch
deleted file mode 100644
index ee19f36..0000000
--- a/target/linux/ipq806x/patches-4.9/400-mtd-ubi-add-quirk-to-autoload-ubi-on-rt-ac58u.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From b8f3a7ccbeca5bdbd1b6210b94b38d3fef2dd0bd Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey at googlemail.com>
-Date: Thu, 19 Jan 2017 01:57:22 +0100
-Subject: [PATCH 16/38] mtd: ubi: add auto_attach HACK for the ASUS RT-AC58U
-
-This patch adds a hack that allows UBI's autoattach feature
-to work with the custom ASUS UBI_DEV partition name.
-
-This is necessary because the vendor's u-boot doesn't leave
-the bootargs / cmdline alone, so the it can't be overwritten
-easily otherwise.
-
-Signed-off-by: Christian Lamparter <chunkeey at googlemail.com>
----
- drivers/mtd/ubi/build.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/mtd/ubi/build.c
-+++ b/drivers/mtd/ubi/build.c
-@@ -1225,6 +1225,9 @@ static void __init ubi_auto_attach(void)
- mtd = open_mtd_device("ubi");
- if (IS_ERR(mtd))
- mtd = open_mtd_device("data");
-+ /* Hack for the Asus RT-AC58U */
-+ if (IS_ERR(mtd))
-+ mtd = open_mtd_device("UBI_DEV");
-
- if (!IS_ERR(mtd)) {
- size_t len;
More information about the lede-commits
mailing list