[openwrt/openwrt] ramips: add support for Tama W06

LEDE Commits lede-commits at lists.infradead.org
Tue Feb 20 10:27:45 PST 2018 

mkresin pushed a commit to openwrt/openwrt.git, branch master:
https://git.lede-project.org/e1d4aa36b0e08d7e4b77b8b1a7ddae44188e8eb1

commit e1d4aa36b0e08d7e4b77b8b1a7ddae44188e8eb1
Author: INAGAKI Hiroshi <musashino.open at gmail.com>
AuthorDate: Mon Feb 19 14:35:42 2018 +0900

    ramips: add support for Tama W06
    
    Tama Electric Axing W06 is a 2.4 GHz band 11n router, based on Mediatek
    MT7688AN.
    
    Specification:
    
    - MT7688AN (575 MHz)
    - 64 MB of RAM (DDR2 SDRAM)
    - 16 MB of Flash (SPI)
    - 1T1R 2.4 GHz
    - 1x 10/100/1000 Mbps Ethernet
    - 4x LEDs (GPIO connected: 3), 1x button
    - 1x USB 2.0 Type-A (host)
    - UART header on PCB (GND, RX, TX, Vcc from RJ45 side)
    
    Flash instruction using sysupgrade image:
    1. Connect micro-USB cable for power supply into W06 and turn on the
    router
    2. Connect to wifi with SSID "tama-*" with password. Complete SSID and
    password are listed on the back of the router
    3. Access to 192.168.1.1 and login with user name "admin" and password
    empty
    4. In firmware update（ファームウェア更新） page, click "参照" button
    and click "ブラウザー" button to open file browser, select the
    sysupgrade image and press OK button
    5. Wait ~150 seconds to complete flashing
    
    Signed-off-by: INAGAKI Hiroshi <musashino.open at gmail.com>
---
 target/linux/ramips/base-files/etc/board.d/01_leds |   4 +
 .../linux/ramips/base-files/etc/board.d/02_network |   1 +
 .../ramips/base-files/lib/upgrade/platform.sh      |   1 +
 target/linux/ramips/dts/W06.dts                    | 115 +++++++++++++++++++++
 target/linux/ramips/image/mt76x8.mk                |   8 ++
 5 files changed, 129 insertions(+)

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 16d38dd..515656f 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -362,6 +362,10 @@ rt-n14u)
 	set_wifi_led "$boardname:blue:air"
 	set_usb_led "$boardname:blue:usb"
 	;;
+tama,w06)
+	ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
+	ucidef_set_led_wlan "wlan" "WLAN" "$boardname:green:wlan" "phy0tpt"
+	;;
 tew-714tru)
 	set_usb_led "$boardname:red:usb"
 	set_wifi_led "$boardname:green:wifi"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 946810b..fe19a22 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -248,6 +248,7 @@ ramips_setup_interfaces()
 	mzk-ex750np|\
 	na930|\
 	pbr-d1|\
+	tama,w06|\
 	u25awf-h1|\
 	wli-tx4-ag300n|\
 	wmdr-143n|\
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 23d31e9..a0610b2 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -141,6 +141,7 @@ platform_check_image() {
 	sap-g3200u3|\
 	sk-wb8|\
 	sl-r7205|\
+	tama,w06|\
 	tew-638apb-v2|\
 	tew-691gr|\
 	tew-692gr|\
diff --git a/target/linux/ramips/dts/W06.dts b/target/linux/ramips/dts/W06.dts
new file mode 100644
index 0000000..c29a01f
--- /dev/null
+++ b/target/linux/ramips/dts/W06.dts
@@ -0,0 +1,115 @@
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "tama,w06", "mediatek,mt7628an-soc";
+	model = "Tama W06";
+
+	memory at 0{
+		device_type = "memory";
+		reg = <0x0 0x4000000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		wps {
+			label = "w06:green:wps";
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+		};
+
+		wan {
+			label = "w06:green:wan";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+
+		wireless {
+			label = "w06:green:wlan";
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ethernet {
+	mtd-mac-address = <&factory 0x28>;
+};
+
+&ohci {
+	status = "okay";
+};
+
+&pinctrl {
+	state_default: pinctrl0 {
+		gpio {
+			ralink,group = "uart1", "p0led_an", "wdt";
+			ralink,function = "gpio";
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	m25p80 at 0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+		m25p,chunked-io = <32>;
+
+		partition at 0 {
+			label = "u-boot";
+			reg = <0x0 0x30000>;
+			read-only;
+		};
+
+		partition at 30000 {
+			label = "u-boot-env";
+			reg = <0x30000 0x10000>;
+			read-only;
+		};
+
+		factory: partition at 40000 {
+			label = "factory";
+			reg = <0x40000 0x10000>;
+			read-only;
+		};
+
+		partition at 50000 {
+			label = "firmware";
+			reg = <0x50000 0xeb0000>;
+		};
+
+		partition at f00000 {
+			label = "user-data";
+			reg = <0xf00000 0x100000>;
+			read-only;
+		};
+	};
+};
+
+&wmac {
+	status = "okay";
+};
diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk
index fe52809..415075b 100644
--- a/target/linux/ramips/image/mt76x8.mk
+++ b/target/linux/ramips/image/mt76x8.mk
@@ -19,6 +19,14 @@ endef
 DEVICE_VARS += TPLINK_FLASHLAYOUT TPLINK_HWID TPLINK_HWREV TPLINK_HWREVADD TPLINK_HVERSION
 
 
+define Device/tama_w06
+  DTS := W06
+  IMAGE_SIZE := 15040k
+  DEVICE_TITLE := Tama W06
+  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
+endef
+TARGET_DEVICES += tama_w06
+
 define Device/duzun-dm06
   DTS := DUZUN-DM06
   DEVICE_TITLE := DuZun DM06

More information about the lede-commits mailing list