[openwrt/openwrt] lantiq: kernel 4.14: update patches and config
LEDE Commits
lede-commits at lists.infradead.org
Tue Feb 20 10:27:36 PST 2018
mkresin pushed a commit to openwrt/openwrt.git, branch master:
https://git.lede-project.org/f1d84023cb38d9159d3f5bcf290dd100ca724690
commit f1d84023cb38d9159d3f5bcf290dd100ca724690
Author: Hauke Mehrtens <hauke at hauke-m.de>
AuthorDate: Sun Nov 12 23:06:30 2017 +0100
lantiq: kernel 4.14: update patches and config
Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
Signed-off-by: Mathias Kresin <dev at kresin.me>
---
target/linux/lantiq/ase/config-4.14 | 1 +
target/linux/lantiq/config-4.14 | 35 +-
target/linux/lantiq/falcon/config-4.14 | 2 +
.../0001-MIPS-lantiq-add-pcie-driver.patch | 18 +-
.../0004-MIPS-lantiq-add-atm-hack.patch | 13 +-
.../0008-MIPS-lantiq-backport-old-timer-code.patch | 16 +-
...MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch | 2 +-
...MTD-m25p80-allow-loading-mtd-name-from-OF.patch | 6 +-
...3-NET-PHY-add-led-support-for-intel-xway.patch} | 24 +-
...024-NET-lantiq-adds-PHY11G-firmware-blobs.patch | 364 -------
.../0025-NET-MIPS-lantiq-adds-xrx200-net.patch | 60 +-
.../patches-4.14/0026-NET-multi-phy-support.patch | 53 -
.../0028-NET-lantiq-various-etop-fixes.patch | 74 +-
.../0030-GPIO-add-named-gpio-exports.patch | 14 +-
...2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch | 4 +-
...-lantiq-wifi-and-ethernet-eeprom-handling.patch | 9 +-
.../0040-USB-DWC2-enable-usb-power-gpio.patch | 35 -
...-xway-fix-copy-paste-error-in-xrx200_grps.patch | 11 -
.../linux/lantiq/patches-4.14/0047-poweroff.patch | 23 -
.../0050-MIPS-Lantiq-Fix-cascaded-IRQ-setup.patch | 87 --
...ke-the-lantiq-settings-match-vendor-drive.patch | 78 ++
...51-MIPS-lantiq-improve-USB-initialization.patch | 49 +
...ke-the-lantiq-settings-match-vendor-drive.patch | 130 ---
...65-MIPS-lantiq-improve-USB-initialization.patch | 202 ----
...ssc-add-support-for-Lantiq-SSC-SPI-contro.patch | 1078 --------------------
...ssc-fix-platform_no_drv_owner.cocci-warni.patch | 28 -
...spi-lantiq-ssc-add-LTQ_-prefix-to-defines.patch | 723 -------------
.../lantiq/patches-4.14/0152-lantiq-VPE.patch | 8 +-
.../0160-owrt-lantiq-multiple-flash.patch | 31 +-
...lantiq-lock-DMA-register-accesses-for-SMP.patch | 152 ---
...x200-add-gphy-clk-src-device-tree-binding.patch | 8 +-
.../0302-xrx200-add-sensors-driver.patch | 184 ----
target/linux/lantiq/xrx200/config-4.14 | 11 +-
target/linux/lantiq/xway/config-4.14 | 4 +-
target/linux/lantiq/xway_legacy/config-4.14 | 4 +-
35 files changed, 333 insertions(+), 3208 deletions(-)
diff --git a/target/linux/lantiq/ase/config-4.14 b/target/linux/lantiq/ase/config-4.14
index b802509..cf27a14 100644
--- a/target/linux/lantiq/ase/config-4.14
+++ b/target/linux/lantiq/ase/config-4.14
@@ -3,6 +3,7 @@ CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
CONFIG_CPU_MIPSR1=y
CONFIG_CRC16=y
+CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_FIRMWARE_MEMMAP=y
diff --git a/target/linux/lantiq/config-4.14 b/target/linux/lantiq/config-4.14
index a98509e..172ce90 100644
--- a/target/linux/lantiq/config-4.14
+++ b/target/linux/lantiq/config-4.14
@@ -5,12 +5,21 @@ CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
# CONFIG_ARCH_HAS_SG_CHAIN is not set
+# CONFIG_ARCH_HAS_STRICT_KERNEL_RWX is not set
+# CONFIG_ARCH_HAS_STRICT_MODULE_RWX is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
+CONFIG_ARCH_MMAP_RND_BITS_MAX=15
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
+# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
+# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
+CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
+# CONFIG_ARCH_WANTS_THP_SWAP is not set
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_CEVT_R4K=y
CONFIG_CLKDEV_LOOKUP=y
@@ -36,18 +45,27 @@ CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
+# CONFIG_DMA_NOOP_OPS is not set
+# CONFIG_DMA_VIRT_OPS is not set
+# CONFIG_DRM_LIB_RANDOM is not set
CONFIG_DTC=y
# CONFIG_DT_EASY50712 is not set
CONFIG_EARLY_PRINTK=y
CONFIG_ETHERNET_PACKET_MANGLE=y
+CONFIG_EXPORTFS=y
CONFIG_FIXED_PHY=y
+CONFIG_FUTEX_PI=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_IPI=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_TIME_VSYSCALL=y
@@ -55,6 +73,7 @@ CONFIG_GPIOLIB=y
CONFIG_GPIO_MM_LANTIQ=y
CONFIG_GPIO_STP_XWAY=y
CONFIG_GPIO_SYSFS=y
+# CONFIG_GRO_CELLS is not set
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
@@ -71,6 +90,7 @@ CONFIG_HAVE_CBPF_JIT=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
@@ -104,6 +124,7 @@ CONFIG_HZ_PERIODIC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_MIPS_CPU=y
CONFIG_IRQ_WORK=y
@@ -114,7 +135,10 @@ CONFIG_LANTIQ_WDT=y
# CONFIG_LANTIQ_XRX200 is not set
CONFIG_LEDS_GPIO=y
CONFIG_LIBFDT=y
-CONFIG_MDIO_BOARDINFO=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MFD_CORE=y
+CONFIG_MFD_SYSCON=y
CONFIG_MIPS=y
CONFIG_MIPS_ASID_BITS=8
CONFIG_MIPS_ASID_SHIFT=0
@@ -160,13 +184,20 @@ CONFIG_PCI_DRIVERS_LEGACY=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
+CONFIG_PHY_LANTIQ_RCU_USB2=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_LANTIQ=y
# CONFIG_PINCTRL_SINGLE is not set
CONFIG_PINCTRL_XWAY=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
CONFIG_PSB6970_PHY=y
+# CONFIG_RCU_NEED_SEGCBLIST is not set
# CONFIG_RCU_STALL_COMMON is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_MMIO=y
CONFIG_RESET_CONTROLLER=y
+CONFIG_RESET_LANTIQ=y
CONFIG_RTL8366RB_PHY=y
CONFIG_RTL8366_SMI=y
# CONFIG_SCHED_INFO is not set
@@ -194,6 +225,8 @@ CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_SYS_SUPPORTS_MIPS16=y
CONFIG_SYS_SUPPORTS_MULTITHREADING=y
+CONFIG_THIN_ARCHIVES=y
CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TINY_SRCU=y
CONFIG_USE_OF=y
# CONFIG_XRX200_PHY_FW is not set
diff --git a/target/linux/lantiq/falcon/config-4.14 b/target/linux/lantiq/falcon/config-4.14
index de4fa36..84b36d0 100644
--- a/target/linux/lantiq/falcon/config-4.14
+++ b/target/linux/lantiq/falcon/config-4.14
@@ -1,8 +1,10 @@
+# CONFIG_MFD_CORE is not set
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_SPLIT_FIRMWARE_NAME="linux"
CONFIG_PINCTRL_FALCON=y
# CONFIG_PSB6970_PHY is not set
+# CONFIG_RESET_LANTIQ is not set
# CONFIG_RTL8366_SMI is not set
CONFIG_SOC_FALCON=y
# CONFIG_SOC_TYPE_XWAY is not set
diff --git a/target/linux/lantiq/patches-4.14/0001-MIPS-lantiq-add-pcie-driver.patch b/target/linux/lantiq/patches-4.14/0001-MIPS-lantiq-add-pcie-driver.patch
index 91a6acc..ecabe81 100644
--- a/target/linux/lantiq/patches-4.14/0001-MIPS-lantiq-add-pcie-driver.patch
+++ b/target/linux/lantiq/patches-4.14/0001-MIPS-lantiq-add-pcie-driver.patch
@@ -41,15 +41,15 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
--- a/arch/mips/lantiq/Kconfig
+++ b/arch/mips/lantiq/Kconfig
-@@ -17,6 +17,7 @@ config SOC_XWAY
+@@ -18,6 +18,7 @@ config SOC_XWAY
bool "XWAY"
select SOC_TYPE_XWAY
select HW_HAS_PCI
+ select ARCH_SUPPORTS_MSI
+ select MFD_SYSCON
+ select MFD_CORE
- config SOC_FALCON
- bool "FALCON"
-@@ -47,6 +48,15 @@ config PCI_LANTIQ
+@@ -50,6 +51,15 @@ config PCI_LANTIQ
bool "PCI Support"
depends on SOC_XWAY && PCI
@@ -67,7 +67,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
depends on SOC_XWAY
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
-@@ -48,6 +48,8 @@ obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o
+@@ -49,6 +49,8 @@ obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o
obj-$(CONFIG_SOC_MT7620) += pci-mt7620.o
obj-$(CONFIG_SOC_RT288X) += pci-rt2880.o
obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
@@ -176,7 +176,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
@@ -25,5 +31,10 @@ int pcibios_plat_dev_init(struct pci_dev
- int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+ int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
+#ifdef CONFIG_PCIE_LANTIQ
+ if (pci_find_capability(dev, PCI_CAP_ID_EXP))
@@ -4143,7 +4143,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
+
--- a/arch/mips/pci/pci-legacy.c
+++ b/arch/mips/pci/pci-legacy.c
-@@ -300,3 +300,30 @@ char *__init pcibios_setup(char *str)
+@@ -309,3 +309,30 @@ char *__init pcibios_setup(char *str)
return pcibios_plat_setup(str);
return str;
}
@@ -5494,7 +5494,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
(transaction layer end-to-end CRC checking).
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
-@@ -1250,6 +1250,8 @@ void pci_walk_bus(struct pci_bus *top, i
+@@ -1300,6 +1300,8 @@ void pci_walk_bus(struct pci_bus *top, i
void *userdata);
int pci_cfg_space_size(struct pci_dev *dev);
unsigned char pci_bus_max_busnr(struct pci_bus *bus);
@@ -5505,7 +5505,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
unsigned long type);
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
-@@ -1056,6 +1056,12 @@
+@@ -1061,6 +1061,12 @@
#define PCI_DEVICE_ID_SGI_LITHIUM 0x1002
#define PCI_DEVICE_ID_SGI_IOC4 0x100a
diff --git a/target/linux/lantiq/patches-4.14/0004-MIPS-lantiq-add-atm-hack.patch b/target/linux/lantiq/patches-4.14/0004-MIPS-lantiq-add-atm-hack.patch
index 479decd..2c73cec 100644
--- a/target/linux/lantiq/patches-4.14/0004-MIPS-lantiq-add-atm-hack.patch
+++ b/target/linux/lantiq/patches-4.14/0004-MIPS-lantiq-add-atm-hack.patch
@@ -431,7 +431,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
#include <asm/bootinfo.h>
#include <asm/irq_cpu.h>
-@@ -100,6 +101,7 @@ void ltq_mask_and_ack_irq(struct irq_dat
+@@ -96,6 +97,7 @@ void ltq_mask_and_ack_irq(struct irq_dat
ltq_icu_w32(im, ltq_icu_r32(im, ier) & ~BIT(offset), ier);
ltq_icu_w32(im, BIT(offset), isr);
}
@@ -441,7 +441,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
{
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
-@@ -63,6 +63,8 @@ void (*_dma_cache_wback)(unsigned long s
+@@ -64,6 +64,8 @@ void (*_dma_cache_wback)(unsigned long s
void (*_dma_cache_inv)(unsigned long start, unsigned long size);
EXPORT_SYMBOL(_dma_cache_wback_inv);
@@ -452,7 +452,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
--- a/include/uapi/linux/atm.h
+++ b/include/uapi/linux/atm.h
-@@ -130,8 +130,14 @@
+@@ -131,8 +131,14 @@
#define ATM_ABR 4
#define ATM_ANYCLASS 5 /* compatible with everything */
@@ -469,16 +469,15 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
int max_pcr; /* maximum PCR in cells per second */
--- a/net/atm/common.c
+++ b/net/atm/common.c
-@@ -62,11 +62,17 @@ static void vcc_remove_socket(struct soc
+@@ -62,10 +62,16 @@ static void vcc_remove_socket(struct soc
write_unlock_irq(&vcc_sklist_lock);
}
+struct sk_buff* (*ifx_atm_alloc_tx)(struct atm_vcc *, unsigned int) = NULL;
+EXPORT_SYMBOL(ifx_atm_alloc_tx);
+
- static struct sk_buff *alloc_tx(struct atm_vcc *vcc, unsigned int size)
+ static bool vcc_tx_ready(struct atm_vcc *vcc, unsigned int size)
{
- struct sk_buff *skb;
struct sock *sk = sk_atm(vcc);
+ if (ifx_atm_alloc_tx != NULL)
@@ -489,7 +488,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
sk_wmem_alloc_get(sk), size, sk->sk_sndbuf);
--- a/net/atm/proc.c
+++ b/net/atm/proc.c
-@@ -154,7 +154,7 @@ static void *vcc_seq_next(struct seq_fil
+@@ -155,7 +155,7 @@ static void *vcc_seq_next(struct seq_fil
static void pvc_info(struct seq_file *seq, struct atm_vcc *vcc)
{
static const char *const class_name[] = {
diff --git a/target/linux/lantiq/patches-4.14/0008-MIPS-lantiq-backport-old-timer-code.patch b/target/linux/lantiq/patches-4.14/0008-MIPS-lantiq-backport-old-timer-code.patch
index 335a1e2..52e4cbe 100644
--- a/target/linux/lantiq/patches-4.14/0008-MIPS-lantiq-backport-old-timer-code.patch
+++ b/target/linux/lantiq/patches-4.14/0008-MIPS-lantiq-backport-old-timer-code.patch
@@ -172,9 +172,9 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
+#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */
--- a/arch/mips/lantiq/xway/Makefile
+++ b/arch/mips/lantiq/xway/Makefile
-@@ -1,4 +1,10 @@
--obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o
-+obj-y := prom.o sysctrl.o clk.o reset.o dma.o dcdc.o
+@@ -1,3 +1,9 @@
+-obj-y := prom.o sysctrl.o clk.o dma.o gptu.o dcdc.o
++obj-y := prom.o sysctrl.o clk.o dma.o dcdc.o
+
+ifdef CONFIG_SOC_AMAZON_SE
+obj-y += gptu.o
@@ -183,10 +183,9 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
+endif
obj-y += vmmc.o
-
--- /dev/null
+++ b/arch/mips/lantiq/xway/timer.c
-@@ -0,0 +1,845 @@
+@@ -0,0 +1,846 @@
+#ifndef CONFIG_SOC_AMAZON_SE
+
+#include <linux/kernel.h>
@@ -201,6 +200,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
++#include <linux/sched/signal.h>
+
+#include <asm/irq.h>
+#include <asm/div64.h>
@@ -880,14 +880,14 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
+ int ret;
+ struct gptu_ioctl_param param;
+
-+ if (!access_ok(VERIFY_READ, arg, sizeof(struct gptu_ioctl_param)))
++ if (!access_ok(VERIFY_READ, (void __user *)arg, sizeof(struct gptu_ioctl_param)))
+ return -EFAULT;
-+ copy_from_user(¶m, (void *) arg, sizeof(param));
++ copy_from_user(¶m, (void __user *)arg, sizeof(param));
+
+ if ((((cmd == GPTU_REQUEST_TIMER || cmd == GPTU_SET_TIMER
+ || GPTU_SET_COUNTER) && param.timer < 2)
+ || cmd == GPTU_GET_COUNT_VALUE || cmd == GPTU_CALCULATE_DIVIDER)
-+ && !access_ok(VERIFY_WRITE, arg,
++ && !access_ok(VERIFY_WRITE, (void __user *)arg,
+ sizeof(struct gptu_ioctl_param)))
+ return -EFAULT;
+
diff --git a/target/linux/lantiq/patches-4.14/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch b/target/linux/lantiq/patches-4.14/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch
index 64bf2aa..502c5af 100644
--- a/target/linux/lantiq/patches-4.14/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch
+++ b/target/linux/lantiq/patches-4.14/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch
@@ -10,7 +10,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
--- a/drivers/mtd/maps/lantiq-flash.c
+++ b/drivers/mtd/maps/lantiq-flash.c
-@@ -137,7 +137,11 @@ ltq_mtd_probe(struct platform_device *pd
+@@ -131,7 +131,11 @@ ltq_mtd_probe(struct platform_device *pd
if (!ltq_mtd->map)
return -ENOMEM;
diff --git a/target/linux/lantiq/patches-4.14/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch b/target/linux/lantiq/patches-4.14/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch
index f08db65..6cd456a 100644
--- a/target/linux/lantiq/patches-4.14/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch
+++ b/target/linux/lantiq/patches-4.14/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch
@@ -22,8 +22,8 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-@@ -198,6 +199,10 @@ static int m25p_probe(struct spi_device
- enum read_mode mode = SPI_NOR_NORMAL;
+@@ -243,6 +244,10 @@ static int m25p_probe(struct spi_device
+ };
char *flash_name;
int ret;
+ const char __maybe_unused *of_mtd_name = NULL;
@@ -33,7 +33,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
data = dev_get_platdata(&spi->dev);
-@@ -227,6 +232,8 @@ static int m25p_probe(struct spi_device
+@@ -281,6 +286,8 @@ static int m25p_probe(struct spi_device
if (data && data->name)
nor->mtd.name = data->name;
diff --git a/target/linux/lantiq/patches-4.14/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch b/target/linux/lantiq/patches-4.14/0023-NET-PHY-add-led-support-for-intel-xway.patch
similarity index 91%
rename from target/linux/lantiq/patches-4.14/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
rename to target/linux/lantiq/patches-4.14/0023-NET-PHY-add-led-support-for-intel-xway.patch
index e915277..0686842 100644
--- a/target/linux/lantiq/patches-4.14/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
+++ b/target/linux/lantiq/patches-4.14/0023-NET-PHY-add-led-support-for-intel-xway.patch
@@ -24,34 +24,34 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
+
+ /* store the led values if one was passed by the devicetree */
+ if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,ledch", &tmp))
-+ phy_write_mmd_indirect(phydev, XWAY_MMD_LEDCH, MDIO_MMD_VEND2, tmp);
++ phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LEDCH, tmp);
+
+ if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,ledcl", &tmp))
-+ phy_write_mmd_indirect(phydev, XWAY_MMD_LEDCL, MDIO_MMD_VEND2, tmp);
++ phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LEDCL, tmp);
+
+ if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led0h", &tmp))
-+ phy_write_mmd_indirect(phydev, XWAY_MMD_LED0H, MDIO_MMD_VEND2, tmp);
++ phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED0H, tmp);
+
+ if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led0l", &tmp))
-+ phy_write_mmd_indirect(phydev, XWAY_MMD_LED0L, MDIO_MMD_VEND2, tmp);
++ phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED0L, tmp);
+
+ if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led1h", &tmp))
-+ phy_write_mmd_indirect(phydev, XWAY_MMD_LED1H, MDIO_MMD_VEND2, tmp);
++ phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED1H, tmp);
+
+ if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led1l", &tmp))
-+ phy_write_mmd_indirect(phydev, XWAY_MMD_LED1L, MDIO_MMD_VEND2, tmp);
++ phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED1L, tmp);
+
+ if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led2h", &tmp))
-+ phy_write_mmd_indirect(phydev, XWAY_MMD_LED3H, MDIO_MMD_VEND2, tmp);
++ phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED3H, tmp);
+
+ if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led2l", &tmp))
-+ phy_write_mmd_indirect(phydev, XWAY_MMD_LED3L, MDIO_MMD_VEND2, tmp);
++ phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED3L, tmp);
+
+ if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led3h", &tmp))
-+ phy_write_mmd_indirect(phydev, XWAY_MMD_LED3H, MDIO_MMD_VEND2, tmp);
++ phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED3H, tmp);
+
+ if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led3l", &tmp))
-+ phy_write_mmd_indirect(phydev, XWAY_MMD_LED3L, MDIO_MMD_VEND2, tmp);
++ phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED3L, tmp);
+
+ return 0;
+}
@@ -66,8 +66,8 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
{
int err;
@@ -190,6 +235,7 @@ static int xway_gphy_config_init(struct
- phy_write_mmd_indirect(phydev, XWAY_MMD_LED2H, MDIO_MMD_VEND2, ledxh);
- phy_write_mmd_indirect(phydev, XWAY_MMD_LED2L, MDIO_MMD_VEND2, ledxl);
+ phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED2H, ledxh);
+ phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED2L, ledxl);
+ vr9_gphy_of_reg_init(phydev);
return 0;
diff --git a/target/linux/lantiq/patches-4.14/0024-NET-lantiq-adds-PHY11G-firmware-blobs.patch b/target/linux/lantiq/patches-4.14/0024-NET-lantiq-adds-PHY11G-firmware-blobs.patch
deleted file mode 100644
index e62ff2f..0000000
--- a/target/linux/lantiq/patches-4.14/0024-NET-lantiq-adds-PHY11G-firmware-blobs.patch
+++ /dev/null
@@ -1,364 +0,0 @@
-From 77e89d5a28be35058041c79e9874ab26f222c603 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic at openwrt.org>
-Date: Mon, 22 Oct 2012 09:26:24 +0200
-Subject: [PATCH 24/36] NET: lantiq: adds PHY11G firmware blobs
-
-Signed-off-by: John Crispin <blogic at openwrt.org>
----
- firmware/Makefile | 4 +
- firmware/lantiq/COPYING | 286 +++++++++++++++++++++++++++++++++++++++++++++++
- firmware/lantiq/README | 45 ++++++++
- 3 files changed, 335 insertions(+)
- create mode 100644 firmware/lantiq/COPYING
- create mode 100644 firmware/lantiq/README
-
---- a/firmware/Makefile
-+++ b/firmware/Makefile
-@@ -134,6 +134,10 @@ fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_P
- fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw
- fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw
- fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin
-+fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/xrx200_phy11g_a14.bin
-+fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/xrx200_phy11g_a22.bin
-+fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/xrx200_phy22f_a14.bin
-+fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/xrx200_phy22f_a22.bin
- fw-shipped-$(CONFIG_YAM) += yam/1200.bin yam/9600.bin
-
- fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)
---- /dev/null
-+++ b/firmware/lantiq/COPYING
-@@ -0,0 +1,286 @@
-+All firmware files are copyrighted by Lantiq Deutschland GmbH.
-+The files have been extracted from header files found in Lantiq BSPs.
-+If not stated otherwise all files are licensed under GPL.
-+
-+=======================================================================
-+
-+ GNU GENERAL PUBLIC LICENSE
-+ Version 2, June 1991
-+
-+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-+ 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ Everyone is permitted to copy and distribute verbatim copies
-+ of this license document, but changing it is not allowed.
-+
-+ Preamble
-+
-+ The licenses for most software are designed to take away your
-+freedom to share and change it. By contrast, the GNU General Public
-+License is intended to guarantee your freedom to share and change free
-+software--to make sure the software is free for all its users. This
-+General Public License applies to most of the Free Software
-+Foundation's software and to any other program whose authors commit to
-+using it. (Some other Free Software Foundation software is covered by
-+the GNU Library General Public License instead.) You can apply it to
-+your programs, too.
-+
-+ When we speak of free software, we are referring to freedom, not
-+price. Our General Public Licenses are designed to make sure that you
-+have the freedom to distribute copies of free software (and charge for
-+this service if you wish), that you receive source code or can get it
-+if you want it, that you can change the software or use pieces of it
-+in new free programs; and that you know you can do these things.
-+
-+ To protect your rights, we need to make restrictions that forbid
-+anyone to deny you these rights or to ask you to surrender the rights.
-+These restrictions translate to certain responsibilities for you if you
-+distribute copies of the software, or if you modify it.
-+
-+ For example, if you distribute copies of such a program, whether
-+gratis or for a fee, you must give the recipients all the rights that
-+you have. You must make sure that they, too, receive or can get the
-+source code. And you must show them these terms so they know their
-+rights.
-+
-+ We protect your rights with two steps: (1) copyright the software, and
-+(2) offer you this license which gives you legal permission to copy,
-+distribute and/or modify the software.
-+
-+ Also, for each author's protection and ours, we want to make certain
-+that everyone understands that there is no warranty for this free
-+software. If the software is modified by someone else and passed on, we
-+want its recipients to know that what they have is not the original, so
-+that any problems introduced by others will not reflect on the original
-+authors' reputations.
-+
-+ Finally, any free program is threatened constantly by software
-+patents. We wish to avoid the danger that redistributors of a free
-+program will individually obtain patent licenses, in effect making the
-+program proprietary. To prevent this, we have made it clear that any
-+patent must be licensed for everyone's free use or not licensed at all.
-+
-+ The precise terms and conditions for copying, distribution and
-+modification follow.
-+
-+ GNU GENERAL PUBLIC LICENSE
-+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-+
-+ 0. This License applies to any program or other work which contains
-+a notice placed by the copyright holder saying it may be distributed
-+under the terms of this General Public License. The "Program", below,
-+refers to any such program or work, and a "work based on the Program"
-+means either the Program or any derivative work under copyright law:
-+that is to say, a work containing the Program or a portion of it,
-+either verbatim or with modifications and/or translated into another
-+language. (Hereinafter, translation is included without limitation in
-+the term "modification".) Each licensee is addressed as "you".
-+
-+Activities other than copying, distribution and modification are not
-+covered by this License; they are outside its scope. The act of
-+running the Program is not restricted, and the output from the Program
-+is covered only if its contents constitute a work based on the
-+Program (independent of having been made by running the Program).
-+Whether that is true depends on what the Program does.
-+
-+ 1. You may copy and distribute verbatim copies of the Program's
-+source code as you receive it, in any medium, provided that you
-+conspicuously and appropriately publish on each copy an appropriate
-+copyright notice and disclaimer of warranty; keep intact all the
-+notices that refer to this License and to the absence of any warranty;
-+and give any other recipients of the Program a copy of this License
-+along with the Program.
-+
-+You may charge a fee for the physical act of transferring a copy, and
-+you may at your option offer warranty protection in exchange for a fee.
-+
-+ 2. You may modify your copy or copies of the Program or any portion
-+of it, thus forming a work based on the Program, and copy and
-+distribute such modifications or work under the terms of Section 1
-+above, provided that you also meet all of these conditions:
-+
-+ a) You must cause the modified files to carry prominent notices
-+ stating that you changed the files and the date of any change.
-+
-+ b) You must cause any work that you distribute or publish, that in
-+ whole or in part contains or is derived from the Program or any
-+ part thereof, to be licensed as a whole at no charge to all third
-+ parties under the terms of this License.
-+
-+ c) If the modified program normally reads commands interactively
-+ when run, you must cause it, when started running for such
-+ interactive use in the most ordinary way, to print or display an
-+ announcement including an appropriate copyright notice and a
-+ notice that there is no warranty (or else, saying that you provide
-+ a warranty) and that users may redistribute the program under
-+ these conditions, and telling the user how to view a copy of this
-+ License. (Exception: if the Program itself is interactive but
-+ does not normally print such an announcement, your work based on
-+ the Program is not required to print an announcement.)
-+
-+These requirements apply to the modified work as a whole. If
-+identifiable sections of that work are not derived from the Program,
-+and can be reasonably considered independent and separate works in
-+themselves, then this License, and its terms, do not apply to those
-+sections when you distribute them as separate works. But when you
-+distribute the same sections as part of a whole which is a work based
-+on the Program, the distribution of the whole must be on the terms of
-+this License, whose permissions for other licensees extend to the
-+entire whole, and thus to each and every part regardless of who wrote it.
-+
-+Thus, it is not the intent of this section to claim rights or contest
-+your rights to work written entirely by you; rather, the intent is to
-+exercise the right to control the distribution of derivative or
-+collective works based on the Program.
-+
-+In addition, mere aggregation of another work not based on the Program
-+with the Program (or with a work based on the Program) on a volume of
-+a storage or distribution medium does not bring the other work under
-+the scope of this License.
-+
-+ 3. You may copy and distribute the Program (or a work based on it,
-+under Section 2) in object code or executable form under the terms of
-+Sections 1 and 2 above provided that you also do one of the following:
-+
-+ a) Accompany it with the complete corresponding machine-readable
-+ source code, which must be distributed under the terms of Sections
-+ 1 and 2 above on a medium customarily used for software interchange; or,
-+
-+ b) Accompany it with a written offer, valid for at least three
-+ years, to give any third party, for a charge no more than your
-+ cost of physically performing source distribution, a complete
-+ machine-readable copy of the corresponding source code, to be
-+ distributed under the terms of Sections 1 and 2 above on a medium
-+ customarily used for software interchange; or,
-+
-+ c) Accompany it with the information you received as to the offer
-+ to distribute corresponding source code. (This alternative is
-+ allowed only for noncommercial distribution and only if you
-+ received the program in object code or executable form with such
-+ an offer, in accord with Subsection b above.)
-+
-+The source code for a work means the preferred form of the work for
-+making modifications to it. For an executable work, complete source
-+code means all the source code for all modules it contains, plus any
-+associated interface definition files, plus the scripts used to
-+control compilation and installation of the executable. However, as a
-+special exception, the source code distributed need not include
-+anything that is normally distributed (in either source or binary
-+form) with the major components (compiler, kernel, and so on) of the
-+operating system on which the executable runs, unless that component
-+itself accompanies the executable.
-+
-+If distribution of executable or object code is made by offering
-+access to copy from a designated place, then offering equivalent
-+access to copy the source code from the same place counts as
-+distribution of the source code, even though third parties are not
-+compelled to copy the source along with the object code.
-+
-+ 4. You may not copy, modify, sublicense, or distribute the Program
-+except as expressly provided under this License. Any attempt
-+otherwise to copy, modify, sublicense or distribute the Program is
-+void, and will automatically terminate your rights under this License.
-+However, parties who have received copies, or rights, from you under
-+this License will not have their licenses terminated so long as such
-+parties remain in full compliance.
-+
-+ 5. You are not required to accept this License, since you have not
-+signed it. However, nothing else grants you permission to modify or
-+distribute the Program or its derivative works. These actions are
-+prohibited by law if you do not accept this License. Therefore, by
-+modifying or distributing the Program (or any work based on the
-+Program), you indicate your acceptance of this License to do so, and
-+all its terms and conditions for copying, distributing or modifying
-+the Program or works based on it.
-+
-+ 6. Each time you redistribute the Program (or any work based on the
-+Program), the recipient automatically receives a license from the
-+original licensor to copy, distribute or modify the Program subject to
-+these terms and conditions. You may not impose any further
-+restrictions on the recipients' exercise of the rights granted herein.
-+You are not responsible for enforcing compliance by third parties to
-+this License.
-+
-+ 7. If, as a consequence of a court judgment or allegation of patent
-+infringement or for any other reason (not limited to patent issues),
-+conditions are imposed on you (whether by court order, agreement or
-+otherwise) that contradict the conditions of this License, they do not
-+excuse you from the conditions of this License. If you cannot
-+distribute so as to satisfy simultaneously your obligations under this
-+License and any other pertinent obligations, then as a consequence you
-+may not distribute the Program at all. For example, if a patent
-+license would not permit royalty-free redistribution of the Program by
-+all those who receive copies directly or indirectly through you, then
-+the only way you could satisfy both it and this License would be to
-+refrain entirely from distribution of the Program.
-+
-+If any portion of this section is held invalid or unenforceable under
-+any particular circumstance, the balance of the section is intended to
-+apply and the section as a whole is intended to apply in other
-+circumstances.
-+
-+It is not the purpose of this section to induce you to infringe any
-+patents or other property right claims or to contest validity of any
-+such claims; this section has the sole purpose of protecting the
-+integrity of the free software distribution system, which is
-+implemented by public license practices. Many people have made
-+generous contributions to the wide range of software distributed
-+through that system in reliance on consistent application of that
-+system; it is up to the author/donor to decide if he or she is willing
-+to distribute software through any other system and a licensee cannot
-+impose that choice.
-+
-+This section is intended to make thoroughly clear what is believed to
-+be a consequence of the rest of this License.
-+
-+ 8. If the distribution and/or use of the Program is restricted in
-+certain countries either by patents or by copyrighted interfaces, the
-+original copyright holder who places the Program under this License
-+may add an explicit geographical distribution limitation excluding
-+those countries, so that distribution is permitted only in or among
-+countries not thus excluded. In such case, this License incorporates
-+the limitation as if written in the body of this License.
-+
-+ 9. The Free Software Foundation may publish revised and/or new versions
-+of the General Public License from time to time. Such new versions will
-+be similar in spirit to the present version, but may differ in detail to
-+address new problems or concerns.
-+
-+Each version is given a distinguishing version number. If the Program
-+specifies a version number of this License which applies to it and "any
-+later version", you have the option of following the terms and conditions
-+either of that version or of any later version published by the Free
-+Software Foundation. If the Program does not specify a version number of
-+this License, you may choose any version ever published by the Free Software
-+Foundation.
-+
-+ 10. If you wish to incorporate parts of the Program into other free
-+programs whose distribution conditions are different, write to the author
-+to ask for permission. For software which is copyrighted by the Free
-+Software Foundation, write to the Free Software Foundation; we sometimes
-+make exceptions for this. Our decision will be guided by the two goals
-+of preserving the free status of all derivatives of our free software and
-+of promoting the sharing and reuse of software generally.
-+
-+ NO WARRANTY
-+
-+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
-+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
-+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
-+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-+REPAIR OR CORRECTION.
-+
-+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-+POSSIBILITY OF SUCH DAMAGES.
-+
-+ END OF TERMS AND CONDITIONS
---- /dev/null
-+++ b/firmware/lantiq/README
-@@ -0,0 +1,45 @@
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+# MA 02111-1307 USA
-+#
-+# (C) Copyright 2007 - 2012
-+# Lantiq Deutschland GmbH
-+#
-+# (C) Copyright 2012
-+# Daniel Schwierzeck <daniel.schwierzeck at googlemail.com>
-+#
-+
-+#
-+# How to use
-+#
-+Configure kernel with:
-+CONFIG_FW_LOADER=y
-+CONFIG_EXTRA_FIRMWARE_DIR="FIRMWARE_DIR"
-+CONFIG_EXTRA_FIRMWARE="FIRMWARE_FILES"
-+
-+where FIRMWARE_DIR should point to this git tree and FIRMWARE_FILES is a list
-+of space separated files from list below.
-+
-+#
-+# Firmware files
-+#
-+
-+# GPHY core on Lantiq XWAY VR9 v1.1
-+lantiq/xrx200_phy11g_a14.bin
-+lantiq/xrx200_phy22f_a14.bin
-+
-+# GPHY core on Lantiq XWAY VR9 v1.2
-+lantiq/xrx200_phy11g_a22.bin
-+lantiq/xrx200_phy22f_a22.bin
diff --git a/target/linux/lantiq/patches-4.14/0025-NET-MIPS-lantiq-adds-xrx200-net.patch b/target/linux/lantiq/patches-4.14/0025-NET-MIPS-lantiq-adds-xrx200-net.patch
index 5224e7a..7eaf0b7 100644
--- a/target/linux/lantiq/patches-4.14/0025-NET-MIPS-lantiq-adds-xrx200-net.patch
+++ b/target/linux/lantiq/patches-4.14/0025-NET-MIPS-lantiq-adds-xrx200-net.patch
@@ -16,7 +16,7 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
-@@ -104,7 +104,13 @@ config LANTIQ_ETOP
+@@ -107,7 +107,13 @@ config LANTIQ_ETOP
tristate "Lantiq SoC ETOP driver"
depends on SOC_TYPE_XWAY
---help---
@@ -33,7 +33,7 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
source "drivers/net/ethernet/mediatek/Kconfig"
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
-@@ -46,6 +46,7 @@ obj-$(CONFIG_NET_VENDOR_XSCALE) += xscal
+@@ -50,6 +50,7 @@ obj-$(CONFIG_NET_VENDOR_XSCALE) += xscal
obj-$(CONFIG_JME) += jme.o
obj-$(CONFIG_KORINA) += korina.o
obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
@@ -209,7 +209,7 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
+};
--- /dev/null
+++ b/drivers/net/ethernet/lantiq_xrx200.c
-@@ -0,0 +1,1851 @@
+@@ -0,0 +1,1887 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
@@ -240,6 +240,7 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
+#include <linux/of_net.h>
+#include <linux/of_mdio.h>
+#include <linux/of_gpio.h>
++#include <linux/of_platform.h>
+
+#include <xway_dma.h>
+#include <lantiq_soc.h>
@@ -1460,16 +1461,12 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
+static void xrx200_mdio_link(struct net_device *dev)
+{
+ struct xrx200_priv *priv = netdev_priv(dev);
-+ bool link = false;
+ int i;
+
+ for (i = 0; i < priv->num_port; i++) {
+ if (!priv->port[i].phydev)
+ continue;
+
-+ if (priv->port[i].phydev->link)
-+ link = true;
-+
+ if (priv->port[i].link != priv->port[i].phydev->link) {
+ xrx200_gmac_update(&priv->port[i]);
+ priv->port[i].link = priv->port[i].phydev->link;
@@ -1478,8 +1475,6 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
+ (priv->port[i].link)?("got"):("lost"));
+ }
+ }
-+ if (netif_carrier_ok(dev) && !link)
-+ netif_carrier_off(dev);
+}
+
+static inline int xrx200_mdio_poll(struct mii_bus *bus)
@@ -1525,6 +1520,35 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
+ return ltq_mdio_r32(MDIO_READ);
+}
+
++static int xrx200_phy_has_link(struct net_device *dev)
++{
++ struct xrx200_priv *priv = netdev_priv(dev);
++ int i;
++
++ for (i = 0; i < priv->num_port; i++) {
++ if (!priv->port[i].phydev)
++ continue;
++
++ if (priv->port[i].phydev->link)
++ return 1;
++ }
++
++ return 0;
++}
++
++static void xrx200_phy_link_change(struct phy_device *phydev, bool up, bool do_carrier)
++{
++ struct net_device *netdev = phydev->attached_dev;
++
++ if (do_carrier)
++ if (up)
++ netif_carrier_on(netdev);
++ else if (!xrx200_phy_has_link(netdev))
++ netif_carrier_off(netdev);
++
++ phydev->adjust_link(netdev);
++}
++
+static int xrx200_mdio_probe(struct net_device *dev, struct xrx200_port *port)
+{
+ struct xrx200_priv *priv = netdev_priv(dev);
@@ -1557,7 +1581,7 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
+ | SUPPORTED_TP);
+ phydev->advertising = phydev->supported;
+ port->phydev = phydev;
-+ phydev->no_auto_carrier_off = true;
++ phydev->phy_link_change = xrx200_phy_link_change;
+
+ phy_attached_info(phydev);
+
@@ -1880,7 +1904,6 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
+ .ndo_start_xmit = xrx200_start_xmit,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
-+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_get_stats = xrx200_get_stats,
+ .ndo_tx_timeout = xrx200_tx_timeout,
+};
@@ -1937,7 +1960,9 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
+static int xrx200_probe(struct platform_device *pdev)
+{
+ struct resource *res[4];
-+ struct device_node *mdio_np, *iface_np;
++ struct device_node *mdio_np, *iface_np, *phy_np;
++ struct of_phandle_iterator it;
++ int err;
+ int i;
+
+ /* load the memory ranges */
@@ -1958,6 +1983,17 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
+ return -ENOMEM;
+ }
+
++ of_for_each_phandle(&it, err, pdev->dev.of_node, "lantiq,phys", NULL, 0) {
++ phy_np = it.node;
++ if (phy_np) {
++ struct platform_device *phy = of_find_device_by_node(phy_np);
++
++ of_node_put(phy_np);
++ if (!platform_get_drvdata(phy))
++ return -EPROBE_DEFER;
++ }
++ }
++
+ /* get the clock */
+ xrx200_hw.clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(xrx200_hw.clk)) {
diff --git a/target/linux/lantiq/patches-4.14/0026-NET-multi-phy-support.patch b/target/linux/lantiq/patches-4.14/0026-NET-multi-phy-support.patch
deleted file mode 100644
index 6046d6c..0000000
--- a/target/linux/lantiq/patches-4.14/0026-NET-multi-phy-support.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From c6feeeb407a3b8a6597ae377ba4dd138e185e3dd Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic at openwrt.org>
-Date: Sun, 27 Jul 2014 09:38:50 +0100
-Subject: [PATCH 26/36] NET: multi phy support
-
-Signed-off-by: John Crispin <blogic at openwrt.org>
----
- drivers/net/phy/phy.c | 9 ++++++---
- include/linux/phy.h | 1 +
- 2 files changed, 7 insertions(+), 3 deletions(-)
-
---- a/drivers/net/phy/phy.c
-+++ b/drivers/net/phy/phy.c
-@@ -1032,7 +1032,8 @@ void phy_state_machine(struct work_struc
- /* If the link is down, give up on negotiation for now */
- if (!phydev->link) {
- phydev->state = PHY_NOLINK;
-- netif_carrier_off(phydev->attached_dev);
-+ if (!phydev->no_auto_carrier_off)
-+ netif_carrier_off(phydev->attached_dev);
- phydev->adjust_link(phydev->attached_dev);
- break;
- }
-@@ -1124,7 +1125,8 @@ void phy_state_machine(struct work_struc
- netif_carrier_on(phydev->attached_dev);
- } else {
- phydev->state = PHY_NOLINK;
-- netif_carrier_off(phydev->attached_dev);
-+ if (!phydev->no_auto_carrier_off)
-+ netif_carrier_off(phydev->attached_dev);
- }
-
- phydev->adjust_link(phydev->attached_dev);
-@@ -1136,7 +1138,8 @@ void phy_state_machine(struct work_struc
- case PHY_HALTED:
- if (phydev->link) {
- phydev->link = 0;
-- netif_carrier_off(phydev->attached_dev);
-+ if (!phydev->no_auto_carrier_off)
-+ netif_carrier_off(phydev->attached_dev);
- phydev->adjust_link(phydev->attached_dev);
- do_suspend = true;
- }
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -369,6 +369,7 @@ struct phy_device {
- bool is_pseudo_fixed_link;
- bool has_fixups;
- bool suspended;
-+ bool no_auto_carrier_off;
-
- enum phy_state state;
-
diff --git a/target/linux/lantiq/patches-4.14/0028-NET-lantiq-various-etop-fixes.patch b/target/linux/lantiq/patches-4.14/0028-NET-lantiq-various-etop-fixes.patch
index dc99f48..83aef78 100644
--- a/target/linux/lantiq/patches-4.14/0028-NET-lantiq-various-etop-fixes.patch
+++ b/target/linux/lantiq/patches-4.14/0028-NET-lantiq-various-etop-fixes.patch
@@ -328,10 +328,11 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
struct ltq_etop_priv *priv = netdev_priv(dev);
- int i;
+ int mii_mode = priv->mii_mode;
-+
-+ clk_enable(priv->clk_ppe);
- ltq_pmu_enable(PMU_PPE);
++ clk_enable(priv->clk_ppe);
+
+- switch (priv->pldata->mii_mode) {
+ if (of_machine_is_compatible("lantiq,ar9")) {
+ ltq_etop_gbit_init(dev);
+ /* force the etops link to the gbit to MII */
@@ -340,8 +341,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
+ ltq_etop_w32_mask(MDIO_CFG_MASK, 0, LTQ_ETOP_MDIO_CFG);
+ ltq_etop_w32_mask(MAC_CFG_MASK, MAC_CFG_CGEN | MAC_CFG_DUPLEX |
+ MAC_CFG_SPEED | MAC_CFG_LINK, LTQ_ETOP_MAC_CFG);
-
-- switch (priv->pldata->mii_mode) {
++
+ switch (mii_mode) {
case PHY_INTERFACE_MODE_RMII:
- ltq_etop_w32_mask(ETOP_MII_MASK,
@@ -440,19 +440,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
}
static void
-@@ -303,7 +448,10 @@ ltq_etop_get_drvinfo(struct net_device *
- static int
- ltq_etop_nway_reset(struct net_device *dev)
- {
-- return phy_start_aneg(dev->phydev);
-+ if (dev->phydev)
-+ return phy_start_aneg(dev->phydev);
-+ else
-+ return 0;
- }
-
- static const struct ethtool_ops ltq_etop_ethtool_ops = {
-@@ -314,6 +462,39 @@ static const struct ethtool_ops ltq_etop
+@@ -308,6 +453,39 @@ static const struct ethtool_ops ltq_etop
};
static int
@@ -492,7 +480,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, int phy_reg, u16 phy_data)
{
u32 val = MDIO_REQUEST |
-@@ -321,9 +502,9 @@ ltq_etop_mdio_wr(struct mii_bus *bus, in
+@@ -315,9 +493,9 @@ ltq_etop_mdio_wr(struct mii_bus *bus, in
((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET) |
phy_data;
@@ -504,7 +492,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
return 0;
}
-@@ -334,12 +515,12 @@ ltq_etop_mdio_rd(struct mii_bus *bus, in
+@@ -328,12 +506,12 @@ ltq_etop_mdio_rd(struct mii_bus *bus, in
((phy_addr & MDIO_ADDR_MASK) << MDIO_ADDR_OFFSET) |
((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET);
@@ -521,7 +509,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
return val;
}
-@@ -354,8 +535,18 @@ ltq_etop_mdio_probe(struct net_device *d
+@@ -348,8 +526,18 @@ ltq_etop_mdio_probe(struct net_device *d
{
struct ltq_etop_priv *priv = netdev_priv(dev);
struct phy_device *phydev;
@@ -541,7 +529,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
if (!phydev) {
netdev_err(dev, "no PHY found\n");
-@@ -363,21 +554,18 @@ ltq_etop_mdio_probe(struct net_device *d
+@@ -357,21 +545,18 @@ ltq_etop_mdio_probe(struct net_device *d
}
phydev = phy_connect(dev, phydev_name(phydev),
@@ -568,7 +556,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
phydev->advertising = phydev->supported;
phy_attached_info(phydev);
-@@ -398,8 +586,13 @@ ltq_etop_mdio_init(struct net_device *de
+@@ -392,8 +577,13 @@ ltq_etop_mdio_init(struct net_device *de
}
priv->mii_bus->priv = dev;
@@ -584,7 +572,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
priv->mii_bus->name = "ltq_mii";
snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
priv->pdev->name, priv->pdev->id);
-@@ -436,17 +629,19 @@ static int
+@@ -430,17 +620,19 @@ static int
ltq_etop_open(struct net_device *dev)
{
struct ltq_etop_priv *priv = netdev_priv(dev);
@@ -613,7 +601,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
netif_tx_start_all_queues(dev);
return 0;
}
-@@ -455,18 +650,19 @@ static int
+@@ -449,18 +641,19 @@ static int
ltq_etop_stop(struct net_device *dev)
{
struct ltq_etop_priv *priv = netdev_priv(dev);
@@ -643,7 +631,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
return 0;
}
-@@ -476,16 +672,16 @@ ltq_etop_tx(struct sk_buff *skb, struct
+@@ -470,16 +663,16 @@ ltq_etop_tx(struct sk_buff *skb, struct
int queue = skb_get_queue_mapping(skb);
struct netdev_queue *txq = netdev_get_tx_queue(dev, queue);
struct ltq_etop_priv *priv = netdev_priv(dev);
@@ -665,7 +653,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
netdev_err(dev, "tx ring full\n");
netif_tx_stop_queue(txq);
return NETDEV_TX_BUSY;
-@@ -493,7 +689,7 @@ ltq_etop_tx(struct sk_buff *skb, struct
+@@ -487,7 +680,7 @@ ltq_etop_tx(struct sk_buff *skb, struct
/* dma needs to start on a 16 byte aligned address */
byte_offset = CPHYSADDR(skb->data) % 16;
@@ -674,7 +662,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
netif_trans_update(dev);
-@@ -503,11 +699,11 @@ ltq_etop_tx(struct sk_buff *skb, struct
+@@ -497,11 +690,11 @@ ltq_etop_tx(struct sk_buff *skb, struct
wmb();
desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
@@ -689,19 +677,19 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
netif_tx_stop_queue(txq);
return NETDEV_TX_OK;
-@@ -522,8 +718,10 @@ ltq_etop_change_mtu(struct net_device *d
- struct ltq_etop_priv *priv = netdev_priv(dev);
- unsigned long flags;
+@@ -515,8 +708,10 @@ ltq_etop_change_mtu(struct net_device *d
+
+ dev->mtu = new_mtu;
-+ int max = ETH_HLEN + VLAN_HLEN + new_mtu + ETH_FCS_LEN;
++ int max = ETH_HLEN + VLAN_HLEN + new_mtu + ETH_FCS_LEN;
+
- spin_lock_irqsave(&priv->lock, flags);
-- ltq_etop_w32((ETOP_PLEN_UNDER << 16) | new_mtu,
-+ ltq_etop_w32((ETOP_PLEN_UNDER << 16) | max,
- LTQ_ETOP_IGPLEN);
- spin_unlock_irqrestore(&priv->lock, flags);
- }
-@@ -592,6 +790,9 @@ ltq_etop_init(struct net_device *dev)
+ spin_lock_irqsave(&priv->lock, flags);
+- ltq_etop_w32((ETOP_PLEN_UNDER << 16) | new_mtu, LTQ_ETOP_IGPLEN);
++ ltq_etop_w32((ETOP_PLEN_UNDER << 16) | max, LTQ_ETOP_IGPLEN);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+@@ -584,6 +779,9 @@ ltq_etop_init(struct net_device *dev)
if (err)
goto err_hw;
ltq_etop_change_mtu(dev, 1500);
@@ -711,7 +699,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
if (!is_valid_ether_addr(mac.sa_data)) {
-@@ -609,9 +810,10 @@ ltq_etop_init(struct net_device *dev)
+@@ -601,9 +799,10 @@ ltq_etop_init(struct net_device *dev)
dev->addr_assign_type = NET_ADDR_RANDOM;
ltq_etop_set_multicast_list(dev);
@@ -725,7 +713,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
return 0;
err_netdev:
-@@ -631,6 +833,9 @@ ltq_etop_tx_timeout(struct net_device *d
+@@ -623,6 +822,9 @@ ltq_etop_tx_timeout(struct net_device *d
err = ltq_etop_hw_init(dev);
if (err)
goto err_hw;
@@ -735,7 +723,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
netif_trans_update(dev);
netif_wake_queue(dev);
return;
-@@ -654,14 +859,19 @@ static const struct net_device_ops ltq_e
+@@ -646,14 +848,19 @@ static const struct net_device_ops ltq_e
.ndo_tx_timeout = ltq_etop_tx_timeout,
};
@@ -759,7 +747,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
-@@ -687,31 +897,62 @@ ltq_etop_probe(struct platform_device *p
+@@ -679,31 +886,62 @@ ltq_etop_probe(struct platform_device *p
goto err_out;
}
@@ -837,7 +825,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
err = register_netdev(dev);
if (err)
-@@ -740,31 +981,22 @@ ltq_etop_remove(struct platform_device *
+@@ -732,31 +970,22 @@ ltq_etop_remove(struct platform_device *
return 0;
}
diff --git a/target/linux/lantiq/patches-4.14/0030-GPIO-add-named-gpio-exports.patch b/target/linux/lantiq/patches-4.14/0030-GPIO-add-named-gpio-exports.patch
index e2a421b..30b6a11 100644
--- a/target/linux/lantiq/patches-4.14/0030-GPIO-add-named-gpio-exports.patch
+++ b/target/linux/lantiq/patches-4.14/0030-GPIO-add-named-gpio-exports.patch
@@ -22,7 +22,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
#include "gpiolib.h"
-@@ -538,3 +540,73 @@ void of_gpiochip_remove(struct gpio_chip
+@@ -506,3 +508,73 @@ void of_gpiochip_remove(struct gpio_chip
gpiochip_remove_pin_ranges(chip);
of_node_put(chip->of_node);
}
@@ -98,7 +98,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
+#endif
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
-@@ -126,6 +126,12 @@ static inline int gpio_export(unsigned g
+@@ -127,6 +127,12 @@ static inline int gpio_export(unsigned g
return gpiod_export(gpio_to_desc(gpio), direction_may_change);
}
@@ -113,7 +113,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
{
--- a/include/linux/gpio/consumer.h
+++ b/include/linux/gpio/consumer.h
-@@ -427,6 +427,7 @@ static inline struct gpio_desc *devm_get
+@@ -451,6 +451,7 @@ struct gpio_desc *devm_fwnode_get_gpiod_
#if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
@@ -121,7 +121,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
int gpiod_export_link(struct device *dev, const char *name,
struct gpio_desc *desc);
-@@ -434,6 +435,13 @@ void gpiod_unexport(struct gpio_desc *de
+@@ -458,6 +459,13 @@ void gpiod_unexport(struct gpio_desc *de
#else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
@@ -137,7 +137,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
{
--- a/drivers/gpio/gpiolib-sysfs.c
+++ b/drivers/gpio/gpiolib-sysfs.c
-@@ -544,7 +544,7 @@ static struct class gpio_class = {
+@@ -553,7 +553,7 @@ static struct class gpio_class = {
*
* Returns zero on success, else an error.
*/
@@ -146,7 +146,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
{
struct gpio_chip *chip;
struct gpio_device *gdev;
-@@ -606,6 +606,8 @@ int gpiod_export(struct gpio_desc *desc,
+@@ -615,6 +615,8 @@ int gpiod_export(struct gpio_desc *desc,
offset = gpio_chip_hwgpio(desc);
if (chip->names && chip->names[offset])
ioname = chip->names[offset];
@@ -155,7 +155,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
dev = device_create_with_groups(&gpio_class, &gdev->dev,
MKDEV(0, 0), data, gpio_groups,
-@@ -627,6 +629,12 @@ err_unlock:
+@@ -636,6 +638,12 @@ err_unlock:
gpiod_dbg(desc, "%s: status %d\n", __func__, status);
return status;
}
diff --git a/target/linux/lantiq/patches-4.14/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch b/target/linux/lantiq/patches-4.14/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
index c275b55..a1e1cce 100644
--- a/target/linux/lantiq/patches-4.14/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
+++ b/target/linux/lantiq/patches-4.14/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
@@ -18,7 +18,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
-@@ -643,6 +643,16 @@ config I2C_MESON
+@@ -696,6 +696,16 @@ config I2C_MESON
If you say yes to this option, support will be included for the
I2C interface on the Amlogic Meson family of SoCs.
@@ -37,7 +37,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
depends on PPC
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
-@@ -59,6 +59,7 @@ obj-$(CONFIG_I2C_IMX) += i2c-imx.o
+@@ -68,6 +68,7 @@ obj-$(CONFIG_I2C_IMX_LPI2C) += i2c-imx-l
obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
obj-$(CONFIG_I2C_JZ4780) += i2c-jz4780.o
obj-$(CONFIG_I2C_KEMPLD) += i2c-kempld.o
diff --git a/target/linux/lantiq/patches-4.14/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch b/target/linux/lantiq/patches-4.14/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
index a5ecd94..2e0ce46 100644
--- a/target/linux/lantiq/patches-4.14/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
+++ b/target/linux/lantiq/patches-4.14/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
@@ -27,14 +27,13 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
#endif /* _LTQ_XWAY_H__ */
--- a/arch/mips/lantiq/xway/Makefile
+++ b/arch/mips/lantiq/xway/Makefile
-@@ -8,4 +8,7 @@ endif
+@@ -7,3 +7,6 @@ obj-y += timer.o
+ endif
obj-y += vmmc.o
-
++
+obj-y += eth_mac.o
+obj-$(CONFIG_PCI) += ath5k_eep.o
-+
- obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
--- /dev/null
+++ b/arch/mips/lantiq/xway/ath5k_eep.c
@@ -0,0 +1,136 @@
@@ -204,7 +203,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
+early_param("ethaddr", setup_ethaddr);
--- a/drivers/net/ethernet/lantiq_etop.c
+++ b/drivers/net/ethernet/lantiq_etop.c
-@@ -794,7 +794,11 @@ ltq_etop_init(struct net_device *dev)
+@@ -783,7 +783,11 @@ ltq_etop_init(struct net_device *dev)
if (err)
goto err_hw;
diff --git a/target/linux/lantiq/patches-4.14/0040-USB-DWC2-enable-usb-power-gpio.patch b/target/linux/lantiq/patches-4.14/0040-USB-DWC2-enable-usb-power-gpio.patch
deleted file mode 100644
index fc63123..0000000
--- a/target/linux/lantiq/patches-4.14/0040-USB-DWC2-enable-usb-power-gpio.patch
+++ /dev/null
@@ -1,35 +0,0 @@
---- a/drivers/usb/dwc2/platform.c
-+++ b/drivers/usb/dwc2/platform.c
-@@ -42,6 +42,7 @@
- #include <linux/dma-mapping.h>
- #include <linux/of_device.h>
- #include <linux/mutex.h>
-+#include <linux/of_gpio.h>
- #include <linux/platform_device.h>
- #include <linux/phy/phy.h>
- #include <linux/platform_data/s3c-hsotg.h>
-@@ -544,6 +545,7 @@ static int dwc2_driver_probe(struct plat
- struct dwc2_hsotg *hsotg;
- struct resource *res;
- int retval;
-+ int gpio_count;
-
- match = of_match_device(dwc2_of_match_table, &dev->dev);
- if (match && match->data) {
-@@ -562,6 +564,16 @@ static int dwc2_driver_probe(struct plat
- defparams.dma_desc_fs_enable = 0;
- }
-
-+ gpio_count = of_gpio_count(dev->dev.of_node);
-+ while (gpio_count > 0) {
-+ enum of_gpio_flags flags;
-+ int gpio = of_get_gpio_flags(dev->dev.of_node, --gpio_count, &flags);
-+ if (gpio_request(gpio, "usb"))
-+ continue;
-+ dev_info(&dev->dev, "requested GPIO %d\n", gpio);
-+ gpio_direction_output(gpio, (flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1));
-+ }
-+
- hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL);
- if (!hsotg)
- return -ENOMEM;
diff --git a/target/linux/lantiq/patches-4.14/0044-pinctrl-xway-fix-copy-paste-error-in-xrx200_grps.patch b/target/linux/lantiq/patches-4.14/0044-pinctrl-xway-fix-copy-paste-error-in-xrx200_grps.patch
deleted file mode 100644
index a2fc9d9..0000000
--- a/target/linux/lantiq/patches-4.14/0044-pinctrl-xway-fix-copy-paste-error-in-xrx200_grps.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/pinctrl/pinctrl-xway.c
-+++ b/drivers/pinctrl/pinctrl-xway.c
-@@ -1028,7 +1028,7 @@ static const struct ltq_pin_group xrx200
- GRP_MUX("spi_cs5", SPI, xrx200_pins_spi_cs5),
- GRP_MUX("spi_cs6", SPI, xrx200_pins_spi_cs6),
- GRP_MUX("usif uart_rx", USIF, xrx200_pins_usif_uart_rx),
-- GRP_MUX("usif uart_rx", USIF, xrx200_pins_usif_uart_tx),
-+ GRP_MUX("usif uart_tx", USIF, xrx200_pins_usif_uart_tx),
- GRP_MUX("usif uart_rts", USIF, xrx200_pins_usif_uart_rts),
- GRP_MUX("usif uart_cts", USIF, xrx200_pins_usif_uart_cts),
- GRP_MUX("usif uart_dtr", USIF, xrx200_pins_usif_uart_dtr),
diff --git a/target/linux/lantiq/patches-4.14/0047-poweroff.patch b/target/linux/lantiq/patches-4.14/0047-poweroff.patch
deleted file mode 100644
index 54249bb..0000000
--- a/target/linux/lantiq/patches-4.14/0047-poweroff.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/arch/mips/lantiq/xway/reset.c
-+++ b/arch/mips/lantiq/xway/reset.c
-@@ -301,12 +301,6 @@ static void ltq_machine_halt(void)
- unreachable();
- }
-
--static void ltq_machine_power_off(void)
--{
-- local_irq_disable();
-- unreachable();
--}
--
- static void ltq_usb_init(void)
- {
- /* Power for USB cores 1 & 2 */
-@@ -379,7 +373,6 @@ static int __init mips_reboot_setup(void
-
- _machine_restart = ltq_machine_restart;
- _machine_halt = ltq_machine_halt;
-- pm_power_off = ltq_machine_power_off;
-
- return 0;
- }
diff --git a/target/linux/lantiq/patches-4.14/0050-MIPS-Lantiq-Fix-cascaded-IRQ-setup.patch b/target/linux/lantiq/patches-4.14/0050-MIPS-Lantiq-Fix-cascaded-IRQ-setup.patch
deleted file mode 100644
index c0d7afc..0000000
--- a/target/linux/lantiq/patches-4.14/0050-MIPS-Lantiq-Fix-cascaded-IRQ-setup.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From: Felix Fietkau <nbd at nbd.name>
-Date: Thu, 19 Jan 2017 12:14:44 +0100
-Subject: [PATCH] MIPS: Lantiq: Fix cascaded IRQ setup
-
-With the IRQ stack changes integrated, the XRX200 devices started
-emitting a constant stream of kernel messages like this:
-
-[ 565.415310] Spurious IRQ: CAUSE=0x1100c300
-
-This appears to be caused by IP0 firing for some reason without being
-handled. Fix this by setting up IP2-6 as a proper chained IRQ handler and
-calling do_IRQ for all MIPS CPU interrupts.
-
-Cc: john at phrozen.org
-Cc: stable at vger.kernel.org
-Signed-off-by: Felix Fietkau <nbd at nbd.name>
----
-
---- a/arch/mips/lantiq/irq.c
-+++ b/arch/mips/lantiq/irq.c
-@@ -271,6 +271,11 @@ static void ltq_hw5_irqdispatch(void)
- DEFINE_HWx_IRQDISPATCH(5)
- #endif
-
-+static void ltq_hw_irq_handler(struct irq_desc *desc)
-+{
-+ ltq_hw_irqdispatch(irq_desc_get_irq(desc) - 2);
-+}
-+
- #ifdef CONFIG_MIPS_MT_SMP
- void __init arch_init_ipiirq(int irq, struct irqaction *action)
- {
-@@ -315,23 +320,19 @@ static struct irqaction irq_call = {
- asmlinkage void plat_irq_dispatch(void)
- {
- unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
-- unsigned int i;
-+ int irq;
-
-- if ((MIPS_CPU_TIMER_IRQ == 7) && (pending & CAUSEF_IP7)) {
-- do_IRQ(MIPS_CPU_TIMER_IRQ);
-- goto out;
-- } else {
-- for (i = 0; i < MAX_IM; i++) {
-- if (pending & (CAUSEF_IP2 << i)) {
-- ltq_hw_irqdispatch(i);
-- goto out;
-- }
-- }
-+ if (!pending) {
-+ spurious_interrupt();
-+ return;
- }
-- pr_alert("Spurious IRQ: CAUSE=0x%08x\n", read_c0_status());
-
--out:
-- return;
-+ pending >>= CAUSEB_IP;
-+ while (pending) {
-+ irq = fls(pending) - 1;
-+ do_IRQ(MIPS_CPU_IRQ_BASE + irq);
-+ pending &= ~BIT(irq);
-+ }
- }
-
- static int icu_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
-@@ -356,11 +357,6 @@ static const struct irq_domain_ops irq_d
- .map = icu_map,
- };
-
--static struct irqaction cascade = {
-- .handler = no_action,
-- .name = "cascade",
--};
--
- int __init icu_of_init(struct device_node *node, struct device_node *parent)
- {
- struct device_node *eiu_node;
-@@ -392,7 +388,7 @@ int __init icu_of_init(struct device_nod
- mips_cpu_irq_init();
-
- for (i = 0; i < MAX_IM; i++)
-- setup_irq(i + 2, &cascade);
-+ irq_set_chained_handler(i + 2, ltq_hw_irq_handler);
-
- if (cpu_has_vint) {
- pr_info("Setting up vectored interrupts\n");
diff --git a/target/linux/lantiq/patches-4.14/0050-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch b/target/linux/lantiq/patches-4.14/0050-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch
new file mode 100644
index 0000000..3789424
--- /dev/null
+++ b/target/linux/lantiq/patches-4.14/0050-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch
@@ -0,0 +1,78 @@
+From de2cad82c4d0872066f83ce59462603852b47f03 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke at hauke-m.de>
+Date: Fri, 6 Jan 2017 17:55:24 +0100
+Subject: [PATCH 2/2] usb: dwc2: add support for other Lantiq SoCs
+
+The size of the internal RAM of the DesignWare USB controller changed
+between the different Lantiq SoCs. We have the following sizes:
+
+Amazon + Danube: 8 KByte
+Amazon SE + arx100: 2 KByte
+xrx200 + xrx300: 2.5 KByte
+
+For Danube SoC we do not provide the params and let the driver decide
+to use sane defaults, for the Amazon SE and arx100 we use small fifos
+and for the xrx200 and xrx300 SCs a little bit bigger periodic fifo.
+The auto detection of max_transfer_size and max_packet_count should
+work, so remove it.
+
+Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
+---
+ drivers/usb/dwc2/platform.c | 46 ++++++++++++++++++++++++++++++++++++++-------
+ 1 file changed, 39 insertions(+), 7 deletions(-)
+
+--- a/drivers/usb/dwc2/params.c
++++ b/drivers/usb/dwc2/params.c
+@@ -83,7 +83,14 @@ static void dwc2_set_rk_params(struct dw
+ GAHBCFG_HBSTLEN_SHIFT;
+ }
+
+-static void dwc2_set_ltq_params(struct dwc2_hsotg *hsotg)
++static void dwc2_set_ltq_danube_params(struct dwc2_hsotg *hsotg)
++{
++ struct dwc2_core_params *p = &hsotg->params;
++
++ p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
++}
++
++static void dwc2_set_ltq_ase_params(struct dwc2_hsotg *hsotg)
+ {
+ struct dwc2_core_params *p = &hsotg->params;
+
+@@ -91,12 +98,20 @@ static void dwc2_set_ltq_params(struct d
+ p->host_rx_fifo_size = 288;
+ p->host_nperio_tx_fifo_size = 128;
+ p->host_perio_tx_fifo_size = 96;
+- p->max_transfer_size = 65535;
+- p->max_packet_count = 511;
+ p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 <<
+ GAHBCFG_HBSTLEN_SHIFT;
+ }
+
++static void dwc2_set_ltq_xrx200_params(struct dwc2_hsotg *hsotg)
++{
++ struct dwc2_core_params *p = &hsotg->params;
++
++ p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
++ p->host_rx_fifo_size = 288;
++ p->host_nperio_tx_fifo_size = 128;
++ p->host_perio_tx_fifo_size = 136;
++}
++
+ static void dwc2_set_amlogic_params(struct dwc2_hsotg *hsotg)
+ {
+ struct dwc2_core_params *p = &hsotg->params;
+@@ -140,8 +155,11 @@ const struct of_device_id dwc2_of_match_
+ { .compatible = "brcm,bcm2835-usb", .data = dwc2_set_bcm_params },
+ { .compatible = "hisilicon,hi6220-usb", .data = dwc2_set_his_params },
+ { .compatible = "rockchip,rk3066-usb", .data = dwc2_set_rk_params },
+- { .compatible = "lantiq,arx100-usb", .data = dwc2_set_ltq_params },
+- { .compatible = "lantiq,xrx200-usb", .data = dwc2_set_ltq_params },
++ { .compatible = "lantiq,danube-usb", .data = &dwc2_set_ltq_danube_params },
++ { .compatible = "lantiq,ase-usb", .data = &dwc2_set_ltq_ase_params },
++ { .compatible = "lantiq,arx100-usb", .data = &dwc2_set_ltq_ase_params },
++ { .compatible = "lantiq,xrx200-usb", .data = &dwc2_set_ltq_xrx200_params },
++ { .compatible = "lantiq,xrx300-usb", .data = &dwc2_set_ltq_xrx200_params },
+ { .compatible = "snps,dwc2" },
+ { .compatible = "samsung,s3c6400-hsotg" },
+ { .compatible = "amlogic,meson8-usb",
diff --git a/target/linux/lantiq/patches-4.14/0051-MIPS-lantiq-improve-USB-initialization.patch b/target/linux/lantiq/patches-4.14/0051-MIPS-lantiq-improve-USB-initialization.patch
new file mode 100644
index 0000000..5030bbf
--- /dev/null
+++ b/target/linux/lantiq/patches-4.14/0051-MIPS-lantiq-improve-USB-initialization.patch
@@ -0,0 +1,49 @@
+From 14909c4e4e836925668e74fc6e0e85ba0283cbf9 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke at hauke-m.de>
+Date: Fri, 6 Jan 2017 17:40:12 +0100
+Subject: [PATCH 2/2] MIPS: lantiq: improve USB initialization
+
+This adds code to initialize the USB controller and PHY also on Danube,
+Amazon SE and AR10. This code is based on the Vendor driver from
+different UGW versions and compared to the hardware documentation.
+
+Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
+---
+ arch/mips/lantiq/xway/sysctrl.c | 20 +++++++
+ 2 files changed, 110 insertions(+), 30 deletions(-)
+
+
+--- a/arch/mips/lantiq/xway/sysctrl.c
++++ b/arch/mips/lantiq/xway/sysctrl.c
+@@ -246,6 +246,25 @@ static void pmu_disable(struct clk *clk)
+ pr_warn("deactivating PMU module failed!");
+ }
+
++static void usb_set_clock(void)
++{
++ unsigned int val = ltq_cgu_r32(ifccr);
++
++ if (of_machine_is_compatible("lantiq,ar10") ||
++ of_machine_is_compatible("lantiq,grx390")) {
++ val &= ~0x03; /* XTAL divided by 3 */
++ } else if (of_machine_is_compatible("lantiq,ar9") ||
++ of_machine_is_compatible("lantiq,vr9")) {
++ /* TODO: this depends on the XTAL frequency */
++ val |= 0x03; /* XTAL divided by 3 */
++ } else if (of_machine_is_compatible("lantiq,ase")) {
++ val |= 0x20; /* from XTAL */
++ } else if (of_machine_is_compatible("lantiq,danube")) {
++ val |= 0x30; /* 12 MHz, generated from 36 MHz */
++ }
++ ltq_cgu_w32(val, ifccr);
++}
++
+ /* the pci enable helper */
+ static int pci_enable(struct clk *clk)
+ {
+@@ -569,4 +588,5 @@ void __init ltq_soc_init(void)
+ clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
+ clkdev_add_pmu("1e100400.serial", NULL, 1, 0, PMU_ASC0);
+ }
++ usb_set_clock();
+ }
diff --git a/target/linux/lantiq/patches-4.14/0061-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch b/target/linux/lantiq/patches-4.14/0061-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch
deleted file mode 100644
index 4d18443..0000000
--- a/target/linux/lantiq/patches-4.14/0061-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch
+++ /dev/null
@@ -1,130 +0,0 @@
-From de2cad82c4d0872066f83ce59462603852b47f03 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke at hauke-m.de>
-Date: Fri, 6 Jan 2017 17:55:24 +0100
-Subject: [PATCH 2/2] usb: dwc2: add support for other Lantiq SoCs
-
-The size of the internal RAM of the DesignWare USB controller changed
-between the different Lantiq SoCs. We have the following sizes:
-
-Amazon + Danube: 8 KByte
-Amazon SE + arx100: 2 KByte
-xrx200 + xrx300: 2.5 KByte
-
-For Danube SoC we do not provide the params and let the driver decide
-to use sane defaults, for the Amazon SE and arx100 we use small fifos
-and for the xrx200 and xrx300 SCs a little bit bigger periodic fifo.
-The auto detection of max_transfer_size and max_packet_count should
-work, so remove it.
-
-Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
----
- drivers/usb/dwc2/platform.c | 46 ++++++++++++++++++++++++++++++++++++++-------
- 1 file changed, 39 insertions(+), 7 deletions(-)
-
---- a/drivers/usb/dwc2/platform.c
-+++ b/drivers/usb/dwc2/platform.c
-@@ -151,7 +151,38 @@ static const struct dwc2_core_params par
- .hibernation = -1,
- };
-
--static const struct dwc2_core_params params_ltq = {
-+static const struct dwc2_core_params params_danube = {
-+ .otg_cap = 2, /* non-HNP/non-SRP */
-+ .otg_ver = -1,
-+ .dma_enable = -1,
-+ .dma_desc_enable = -1,
-+ .dma_desc_fs_enable = -1,
-+ .speed = -1,
-+ .enable_dynamic_fifo = -1,
-+ .en_multiple_tx_fifo = -1,
-+ .host_rx_fifo_size = -1,
-+ .host_nperio_tx_fifo_size = -1,
-+ .host_perio_tx_fifo_size = -1,
-+ .max_transfer_size = -1,
-+ .max_packet_count = -1,
-+ .host_channels = -1,
-+ .phy_type = -1,
-+ .phy_utmi_width = -1,
-+ .phy_ulpi_ddr = -1,
-+ .phy_ulpi_ext_vbus = -1,
-+ .i2c_enable = -1,
-+ .ulpi_fs_ls = -1,
-+ .host_support_fs_ls_low_power = -1,
-+ .host_ls_low_power_phy_clk = -1,
-+ .ts_dline = -1,
-+ .reload_ctl = -1,
-+ .ahbcfg = -1,
-+ .uframe_sched = -1,
-+ .external_id_pin_ctl = -1,
-+ .hibernation = -1,
-+};
-+
-+static const struct dwc2_core_params params_ase = {
- .otg_cap = 2, /* non-HNP/non-SRP */
- .otg_ver = -1,
- .dma_enable = -1,
-@@ -163,8 +194,8 @@ static const struct dwc2_core_params par
- .host_rx_fifo_size = 288, /* 288 DWORDs */
- .host_nperio_tx_fifo_size = 128, /* 128 DWORDs */
- .host_perio_tx_fifo_size = 96, /* 96 DWORDs */
-- .max_transfer_size = 65535,
-- .max_packet_count = 511,
-+ .max_transfer_size = -1,
-+ .max_packet_count = -1,
- .host_channels = -1,
- .phy_type = -1,
- .phy_utmi_width = -1,
-@@ -176,8 +207,37 @@ static const struct dwc2_core_params par
- .host_ls_low_power_phy_clk = -1,
- .ts_dline = -1,
- .reload_ctl = -1,
-- .ahbcfg = GAHBCFG_HBSTLEN_INCR16 <<
-- GAHBCFG_HBSTLEN_SHIFT,
-+ .ahbcfg = -1,
-+ .uframe_sched = -1,
-+ .external_id_pin_ctl = -1,
-+ .hibernation = -1,
-+};
-+
-+static const struct dwc2_core_params params_xrx200 = {
-+ .otg_cap = 2, /* non-HNP/non-SRP */
-+ .otg_ver = -1,
-+ .dma_enable = -1,
-+ .dma_desc_enable = -1,
-+ .speed = -1,
-+ .enable_dynamic_fifo = -1,
-+ .en_multiple_tx_fifo = -1,
-+ .host_rx_fifo_size = 288, /* 288 DWORDs */
-+ .host_nperio_tx_fifo_size = 128, /* 128 DWORDs */
-+ .host_perio_tx_fifo_size = 136, /* 136 DWORDs */
-+ .max_transfer_size = -1,
-+ .max_packet_count = -1,
-+ .host_channels = -1,
-+ .phy_type = -1,
-+ .phy_utmi_width = -1,
-+ .phy_ulpi_ddr = -1,
-+ .phy_ulpi_ext_vbus = -1,
-+ .i2c_enable = -1,
-+ .ulpi_fs_ls = -1,
-+ .host_support_fs_ls_low_power = -1,
-+ .host_ls_low_power_phy_clk = -1,
-+ .ts_dline = -1,
-+ .reload_ctl = -1,
-+ .ahbcfg = -1,
- .uframe_sched = -1,
- .external_id_pin_ctl = -1,
- .hibernation = -1,
-@@ -515,8 +575,11 @@ static const struct of_device_id dwc2_of
- { .compatible = "brcm,bcm2835-usb", .data = ¶ms_bcm2835 },
- { .compatible = "hisilicon,hi6220-usb", .data = ¶ms_hi6220 },
- { .compatible = "rockchip,rk3066-usb", .data = ¶ms_rk3066 },
-- { .compatible = "lantiq,arx100-usb", .data = ¶ms_ltq },
-- { .compatible = "lantiq,xrx200-usb", .data = ¶ms_ltq },
-+ { .compatible = "lantiq,danube-usb", .data = ¶ms_danube },
-+ { .compatible = "lantiq,ase-usb", .data = ¶ms_ase },
-+ { .compatible = "lantiq,arx100-usb", .data = ¶ms_ase },
-+ { .compatible = "lantiq,xrx200-usb", .data = ¶ms_xrx200 },
-+ { .compatible = "lantiq,xrx300-usb", .data = ¶ms_xrx200 },
- { .compatible = "snps,dwc2", .data = NULL },
- { .compatible = "samsung,s3c6400-hsotg", .data = NULL},
- { .compatible = "amlogic,meson8b-usb", .data = ¶ms_amlogic },
diff --git a/target/linux/lantiq/patches-4.14/0065-MIPS-lantiq-improve-USB-initialization.patch b/target/linux/lantiq/patches-4.14/0065-MIPS-lantiq-improve-USB-initialization.patch
deleted file mode 100644
index acc2308..0000000
--- a/target/linux/lantiq/patches-4.14/0065-MIPS-lantiq-improve-USB-initialization.patch
+++ /dev/null
@@ -1,202 +0,0 @@
-From 14909c4e4e836925668e74fc6e0e85ba0283cbf9 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke at hauke-m.de>
-Date: Fri, 6 Jan 2017 17:40:12 +0100
-Subject: [PATCH 2/2] MIPS: lantiq: improve USB initialization
-
-This adds code to initialize the USB controller and PHY also on Danube,
-Amazon SE and AR10. This code is based on the Vendor driver from
-different UGW versions and compared to the hardware documentation.
-
-Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
----
- arch/mips/lantiq/xway/reset.c | 120 ++++++++++++++++++++++++++++++----------
- arch/mips/lantiq/xway/sysctrl.c | 20 +++++++
- 2 files changed, 110 insertions(+), 30 deletions(-)
-
---- a/arch/mips/lantiq/xway/reset.c
-+++ b/arch/mips/lantiq/xway/reset.c
-@@ -72,6 +72,8 @@
- #define RCU_USBCFG_HDSEL_BIT BIT(11)
- #define RCU_USBCFG_HOST_END_BIT BIT(10)
- #define RCU_USBCFG_SLV_END_BIT BIT(9)
-+#define RCU_USBCFG_SLV_END_BIT_AR9 BIT(17)
-+
-
- /* USB reset bits */
- #define RCU_USBRESET 0x0010
-@@ -85,6 +87,8 @@
-
- #define RCU_CFG1A 0x0038
- #define RCU_CFG1B 0x003C
-+#define RCU_CFG1_TX_PEE BIT(0)
-+#define RCU_CFG1_DIS_THR_SHIFT 15 /* Disconnect Threshold */
-
- /* USB PMU devices */
- #define PMU_AHBM BIT(15)
-@@ -306,38 +310,91 @@ static void ltq_usb_init(void)
- /* Power for USB cores 1 & 2 */
- ltq_pmu_enable(PMU_AHBM);
- ltq_pmu_enable(PMU_USB0);
-- ltq_pmu_enable(PMU_USB1);
-
-- ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1A) | BIT(0), RCU_CFG1A);
-- ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1B) | BIT(0), RCU_CFG1B);
-+ if (of_machine_is_compatible("lantiq,ar10") ||
-+ of_machine_is_compatible("lantiq,grx390") ||
-+ of_machine_is_compatible("lantiq,ar9") ||
-+ of_machine_is_compatible("lantiq,vr9"))
-+ ltq_pmu_enable(PMU_USB1);
-+
-+ if (of_machine_is_compatible("lantiq,vr9") ||
-+ of_machine_is_compatible("lantiq,ar10")) {
-+ ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1A) | RCU_CFG1_TX_PEE |
-+ 7 << RCU_CFG1_DIS_THR_SHIFT, RCU_CFG1A);
-+ ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1B) | RCU_CFG1_TX_PEE |
-+ 7 << RCU_CFG1_DIS_THR_SHIFT, RCU_CFG1B);
-+ }
-
- /* Enable USB PHY power for cores 1 & 2 */
- ltq_pmu_enable(PMU_USB0_P);
-- ltq_pmu_enable(PMU_USB1_P);
-+ if (of_machine_is_compatible("lantiq,ar10") ||
-+ of_machine_is_compatible("lantiq,grx390") ||
-+ of_machine_is_compatible("lantiq,ar9") ||
-+ of_machine_is_compatible("lantiq,vr9"))
-+ ltq_pmu_enable(PMU_USB1_P);
-+
-+ if (of_machine_is_compatible("lantiq,ase") ||
-+ of_machine_is_compatible("lantiq,danube")) {
-+ /* Configure cores to host mode */
-+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT,
-+ RCU_USB1CFG);
-+
-+ /* Select DMA endianness (Host-endian: big-endian) */
-+ ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT)
-+ | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG);
-+ }
-+
-+ if (of_machine_is_compatible("lantiq,ar9")) {
-+ /* Configure cores to host mode */
-+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT,
-+ RCU_USB1CFG);
-+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT,
-+ RCU_USB2CFG);
-+
-+ /* Select DMA endianness (Host-endian: big-endian) */
-+ ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT_AR9)
-+ | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG);
-+ ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT_AR9)
-+ | RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG);
-+ }
-+
-+ if (of_machine_is_compatible("lantiq,vr9") ||
-+ of_machine_is_compatible("lantiq,ar10")) {
-+ /* Configure cores to host mode */
-+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT,
-+ RCU_USB1CFG);
-+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT,
-+ RCU_USB2CFG);
-+
-+ /* Select DMA endianness (Host-endian: big-endian) */
-+ ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT)
-+ | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG);
-+ ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT)
-+ | RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG);
-+ }
-+
-+ if (of_machine_is_compatible("lantiq,ar9")) {
-+ /* Hard reset USB state machines */
-+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET)
-+ | USBRESET_BIT | BIT(28), RCU_USBRESET);
-+ udelay(50 * 1000);
-+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET)
-+ & ~(USBRESET_BIT | BIT(28)), RCU_USBRESET);
-+ } else {
-+ /* Hard reset USB state machines */
-+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) | USBRESET_BIT, RCU_USBRESET);
-+ udelay(50 * 1000);
-+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) & ~USBRESET_BIT, RCU_USBRESET);
-+ }
-
-- /* Configure cores to host mode */
-- ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT,
-- RCU_USB1CFG);
-- ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT,
-- RCU_USB2CFG);
--
-- /* Select DMA endianness (Host-endian: big-endian) */
-- ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT)
-- | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG);
-- ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT)
-- | RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG);
--
-- /* Hard reset USB state machines */
-- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) | USBRESET_BIT, RCU_USBRESET);
-- udelay(50 * 1000);
-- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) & ~USBRESET_BIT, RCU_USBRESET);
--
-- /* Soft reset USB state machines */
-- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
-- | USB1RESET_BIT | USB2RESET_BIT, RCU_USBRESET2);
-- udelay(50 * 1000);
-- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
-- & ~(USB1RESET_BIT | USB2RESET_BIT), RCU_USBRESET2);
-+ if (of_machine_is_compatible("lantiq,vr9")) {
-+ /* Soft reset USB state machines */
-+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
-+ | USB1RESET_BIT | USB2RESET_BIT, RCU_USBRESET2);
-+ udelay(50 * 1000);
-+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
-+ & ~(USB1RESET_BIT | USB2RESET_BIT), RCU_USBRESET2);
-+ }
- }
-
- static int __init mips_reboot_setup(void)
-@@ -363,8 +420,11 @@ static int __init mips_reboot_setup(void
- if (!ltq_rcu_membase)
- panic("Failed to remap core memory");
-
-- if (of_machine_is_compatible("lantiq,ar9") ||
-- of_machine_is_compatible("lantiq,vr9"))
-+ if (of_machine_is_compatible("lantiq,danube") ||
-+ of_machine_is_compatible("lantiq,ase") ||
-+ of_machine_is_compatible("lantiq,ar9") ||
-+ of_machine_is_compatible("lantiq,vr9") ||
-+ of_machine_is_compatible("lantiq,ar10"))
- ltq_usb_init();
-
- if (of_machine_is_compatible("lantiq,vr9"))
---- a/arch/mips/lantiq/xway/sysctrl.c
-+++ b/arch/mips/lantiq/xway/sysctrl.c
-@@ -254,6 +254,25 @@ static void pmu_disable(struct clk *clk)
- pr_warn("deactivating PMU module failed!");
- }
-
-+static void usb_set_clock(void)
-+{
-+ unsigned int val = ltq_cgu_r32(ifccr);
-+
-+ if (of_machine_is_compatible("lantiq,ar10") ||
-+ of_machine_is_compatible("lantiq,grx390")) {
-+ val &= ~0x03; /* XTAL divided by 3 */
-+ } else if (of_machine_is_compatible("lantiq,ar9") ||
-+ of_machine_is_compatible("lantiq,vr9")) {
-+ /* TODO: this depends on the XTAL frequency */
-+ val |= 0x03; /* XTAL divided by 3 */
-+ } else if (of_machine_is_compatible("lantiq,ase")) {
-+ val |= 0x20; /* from XTAL */
-+ } else if (of_machine_is_compatible("lantiq,danube")) {
-+ val |= 0x30; /* 12 MHz, generated from 36 MHz */
-+ }
-+ ltq_cgu_w32(val, ifccr);
-+}
-+
- /* the pci enable helper */
- static int pci_enable(struct clk *clk)
- {
-@@ -608,4 +627,5 @@ void __init ltq_soc_init(void)
-
- if (of_machine_is_compatible("lantiq,vr9"))
- xbar_fpi_burst_disable();
-+ usb_set_clock();
- }
diff --git a/target/linux/lantiq/patches-4.14/0090-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-contro.patch b/target/linux/lantiq/patches-4.14/0090-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-contro.patch
deleted file mode 100644
index da48ae3..0000000
--- a/target/linux/lantiq/patches-4.14/0090-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-contro.patch
+++ /dev/null
@@ -1,1078 +0,0 @@
-From 941ab0bc001fe24e5f8ce88eed27f2a1b89f3e20 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke at hauke-m.de>
-Date: Tue, 14 Feb 2017 00:31:11 +0100
-Subject: spi: lantiq-ssc: add support for Lantiq SSC SPI controller
-
-This driver supports the Lantiq SSC SPI controller in master
-mode. This controller is found on Intel (former Lantiq) SoCs like
-the Danube, Falcon, xRX200, xRX300.
-
-The hardware uses two hardware FIFOs one for received and one for
-transferred bytes. When the driver writes data into the transmit FIFO
-the complete word is taken from the FIFO into a shift register. The
-data from this shift register is then written to the wire. This driver
-uses the interrupts signaling the status of the FIFOs and not the shift
-register. It is also possible to use the interrupts for the shift
-register, but they will send a signal after every word. When using the
-interrupts for the shift register we get a signal when the last word is
-written into the shift register and not when it is written to the wire.
-After all FIFOs are empty the driver busy waits till the hardware is
-not busy any more and returns the transfer status.
-
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
-Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
-Signed-off-by: Mark Brown <broonie at kernel.org>
----
- .../devicetree/bindings/spi/spi-lantiq-ssc.txt | 29 +
- drivers/spi/Kconfig | 8 +
- drivers/spi/Makefile | 1 +
- drivers/spi/spi-lantiq-ssc.c | 983 +++++++++++++++++++++
- 4 files changed, 1021 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt
- create mode 100644 drivers/spi/spi-lantiq-ssc.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt
-@@ -0,0 +1,29 @@
-+Lantiq Synchronous Serial Controller (SSC) SPI master driver
-+
-+Required properties:
-+- compatible: "lantiq,ase-spi", "lantiq,falcon-spi", "lantiq,xrx100-spi"
-+- #address-cells: see spi-bus.txt
-+- #size-cells: see spi-bus.txt
-+- reg: address and length of the spi master registers
-+- interrupts: should contain the "spi_rx", "spi_tx" and "spi_err" interrupt.
-+
-+
-+Optional properties:
-+- clocks: spi clock phandle
-+- num-cs: see spi-bus.txt, set to 8 if unset
-+- base-cs: the number of the first chip select, set to 1 if unset.
-+
-+Example:
-+
-+
-+spi: spi at E100800 {
-+ compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi";
-+ reg = <0xE100800 0x100>;
-+ interrupt-parent = <&icu0>;
-+ interrupts = <22 23 24>;
-+ interrupt-names = "spi_rx", "spi_tx", "spi_err";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ num-cs = <6>;
-+ base-cs = <1>;
-+};
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -403,6 +403,14 @@ config SPI_NUC900
- help
- SPI driver for Nuvoton NUC900 series ARM SoCs
-
-+config SPI_LANTIQ_SSC
-+ tristate "Lantiq SSC SPI controller"
-+ depends on LANTIQ
-+ help
-+ This driver supports the Lantiq SSC SPI controller in master
-+ mode. This controller is found on Intel (former Lantiq) SoCs like
-+ the Danube, Falcon, xRX200, xRX300.
-+
- config SPI_OC_TINY
- tristate "OpenCores tiny SPI"
- depends on GPIOLIB || COMPILE_TEST
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -47,6 +47,7 @@ obj-$(CONFIG_SPI_FSL_SPI) += spi-fsl-sp
- obj-$(CONFIG_SPI_GPIO) += spi-gpio.o
- obj-$(CONFIG_SPI_IMG_SPFI) += spi-img-spfi.o
- obj-$(CONFIG_SPI_IMX) += spi-imx.o
-+obj-$(CONFIG_SPI_LANTIQ_SSC) += spi-lantiq-ssc.o
- obj-$(CONFIG_SPI_JCORE) += spi-jcore.o
- obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70llp.o
- obj-$(CONFIG_SPI_LP8841_RTC) += spi-lp8841-rtc.o
---- /dev/null
-+++ b/drivers/spi/spi-lantiq-ssc.c
-@@ -0,0 +1,983 @@
-+/*
-+ * Copyright (C) 2011-2015 Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
-+ * Copyright (C) 2016 Hauke Mehrtens <hauke at hauke-m.de>
-+ *
-+ * This program is free software; you can distribute it and/or modify it
-+ * under the terms of the GNU General Public License (Version 2) as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/of_device.h>
-+#include <linux/clk.h>
-+#include <linux/io.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/sched.h>
-+#include <linux/completion.h>
-+#include <linux/spinlock.h>
-+#include <linux/err.h>
-+#include <linux/gpio.h>
-+#include <linux/pm_runtime.h>
-+#include <linux/spi/spi.h>
-+
-+#ifdef CONFIG_LANTIQ
-+#include <lantiq_soc.h>
-+#endif
-+
-+#define SPI_RX_IRQ_NAME "spi_rx"
-+#define SPI_TX_IRQ_NAME "spi_tx"
-+#define SPI_ERR_IRQ_NAME "spi_err"
-+#define SPI_FRM_IRQ_NAME "spi_frm"
-+
-+#define SPI_CLC 0x00
-+#define SPI_PISEL 0x04
-+#define SPI_ID 0x08
-+#define SPI_CON 0x10
-+#define SPI_STAT 0x14
-+#define SPI_WHBSTATE 0x18
-+#define SPI_TB 0x20
-+#define SPI_RB 0x24
-+#define SPI_RXFCON 0x30
-+#define SPI_TXFCON 0x34
-+#define SPI_FSTAT 0x38
-+#define SPI_BRT 0x40
-+#define SPI_BRSTAT 0x44
-+#define SPI_SFCON 0x60
-+#define SPI_SFSTAT 0x64
-+#define SPI_GPOCON 0x70
-+#define SPI_GPOSTAT 0x74
-+#define SPI_FPGO 0x78
-+#define SPI_RXREQ 0x80
-+#define SPI_RXCNT 0x84
-+#define SPI_DMACON 0xec
-+#define SPI_IRNEN 0xf4
-+#define SPI_IRNICR 0xf8
-+#define SPI_IRNCR 0xfc
-+
-+#define SPI_CLC_SMC_S 16 /* Clock divider for sleep mode */
-+#define SPI_CLC_SMC_M (0xFF << SPI_CLC_SMC_S)
-+#define SPI_CLC_RMC_S 8 /* Clock divider for normal run mode */
-+#define SPI_CLC_RMC_M (0xFF << SPI_CLC_RMC_S)
-+#define SPI_CLC_DISS BIT(1) /* Disable status bit */
-+#define SPI_CLC_DISR BIT(0) /* Disable request bit */
-+
-+#define SPI_ID_TXFS_S 24 /* Implemented TX FIFO size */
-+#define SPI_ID_TXFS_M (0x3F << SPI_ID_TXFS_S)
-+#define SPI_ID_RXFS_S 16 /* Implemented RX FIFO size */
-+#define SPI_ID_RXFS_M (0x3F << SPI_ID_RXFS_S)
-+#define SPI_ID_MOD_S 8 /* Module ID */
-+#define SPI_ID_MOD_M (0xff << SPI_ID_MOD_S)
-+#define SPI_ID_CFG_S 5 /* DMA interface support */
-+#define SPI_ID_CFG_M (1 << SPI_ID_CFG_S)
-+#define SPI_ID_REV_M 0x1F /* Hardware revision number */
-+
-+#define SPI_CON_BM_S 16 /* Data width selection */
-+#define SPI_CON_BM_M (0x1F << SPI_CON_BM_S)
-+#define SPI_CON_EM BIT(24) /* Echo mode */
-+#define SPI_CON_IDLE BIT(23) /* Idle bit value */
-+#define SPI_CON_ENBV BIT(22) /* Enable byte valid control */
-+#define SPI_CON_RUEN BIT(12) /* Receive underflow error enable */
-+#define SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */
-+#define SPI_CON_AEN BIT(10) /* Abort error enable */
-+#define SPI_CON_REN BIT(9) /* Receive overflow error enable */
-+#define SPI_CON_TEN BIT(8) /* Transmit overflow error enable */
-+#define SPI_CON_LB BIT(7) /* Loopback control */
-+#define SPI_CON_PO BIT(6) /* Clock polarity control */
-+#define SPI_CON_PH BIT(5) /* Clock phase control */
-+#define SPI_CON_HB BIT(4) /* Heading control */
-+#define SPI_CON_RXOFF BIT(1) /* Switch receiver off */
-+#define SPI_CON_TXOFF BIT(0) /* Switch transmitter off */
-+
-+#define SPI_STAT_RXBV_S 28
-+#define SPI_STAT_RXBV_M (0x7 << SPI_STAT_RXBV_S)
-+#define SPI_STAT_BSY BIT(13) /* Busy flag */
-+#define SPI_STAT_RUE BIT(12) /* Receive underflow error flag */
-+#define SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */
-+#define SPI_STAT_AE BIT(10) /* Abort error flag */
-+#define SPI_STAT_RE BIT(9) /* Receive error flag */
-+#define SPI_STAT_TE BIT(8) /* Transmit error flag */
-+#define SPI_STAT_ME BIT(7) /* Mode error flag */
-+#define SPI_STAT_MS BIT(1) /* Master/slave select bit */
-+#define SPI_STAT_EN BIT(0) /* Enable bit */
-+#define SPI_STAT_ERRORS (SPI_STAT_ME | SPI_STAT_TE | SPI_STAT_RE | \
-+ SPI_STAT_AE | SPI_STAT_TUE | SPI_STAT_RUE)
-+
-+#define SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */
-+#define SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */
-+#define SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */
-+#define SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */
-+#define SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error flag */
-+#define SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */
-+#define SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */
-+#define SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */
-+#define SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */
-+#define SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */
-+#define SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */
-+#define SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */
-+#define SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */
-+#define SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */
-+#define SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */
-+#define SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */
-+#define SPI_WHBSTATE_CLR_ERRORS (SPI_WHBSTATE_CLRRUE | SPI_WHBSTATE_CLRME | \
-+ SPI_WHBSTATE_CLRTE | SPI_WHBSTATE_CLRRE | \
-+ SPI_WHBSTATE_CLRAE | SPI_WHBSTATE_CLRTUE)
-+
-+#define SPI_RXFCON_RXFITL_S 8 /* FIFO interrupt trigger level */
-+#define SPI_RXFCON_RXFITL_M (0x3F << SPI_RXFCON_RXFITL_S)
-+#define SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */
-+#define SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */
-+
-+#define SPI_TXFCON_TXFITL_S 8 /* FIFO interrupt trigger level */
-+#define SPI_TXFCON_TXFITL_M (0x3F << SPI_TXFCON_TXFITL_S)
-+#define SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */
-+#define SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */
-+
-+#define SPI_FSTAT_RXFFL_S 0
-+#define SPI_FSTAT_RXFFL_M (0x3f << SPI_FSTAT_RXFFL_S)
-+#define SPI_FSTAT_TXFFL_S 8
-+#define SPI_FSTAT_TXFFL_M (0x3f << SPI_FSTAT_TXFFL_S)
-+
-+#define SPI_GPOCON_ISCSBN_S 8
-+#define SPI_GPOCON_INVOUTN_S 0
-+
-+#define SPI_FGPO_SETOUTN_S 8
-+#define SPI_FGPO_CLROUTN_S 0
-+
-+#define SPI_RXREQ_RXCNT_M 0xFFFF /* Receive count value */
-+#define SPI_RXCNT_TODO_M 0xFFFF /* Recevie to-do value */
-+
-+#define SPI_IRNEN_TFI BIT(4) /* TX finished interrupt */
-+#define SPI_IRNEN_F BIT(3) /* Frame end interrupt request */
-+#define SPI_IRNEN_E BIT(2) /* Error end interrupt request */
-+#define SPI_IRNEN_T_XWAY BIT(1) /* Transmit end interrupt request */
-+#define SPI_IRNEN_R_XWAY BIT(0) /* Receive end interrupt request */
-+#define SPI_IRNEN_R_XRX BIT(1) /* Transmit end interrupt request */
-+#define SPI_IRNEN_T_XRX BIT(0) /* Receive end interrupt request */
-+#define SPI_IRNEN_ALL 0x1F
-+
-+struct lantiq_ssc_hwcfg {
-+ unsigned int irnen_r;
-+ unsigned int irnen_t;
-+};
-+
-+struct lantiq_ssc_spi {
-+ struct spi_master *master;
-+ struct device *dev;
-+ void __iomem *regbase;
-+ struct clk *spi_clk;
-+ struct clk *fpi_clk;
-+ const struct lantiq_ssc_hwcfg *hwcfg;
-+
-+ spinlock_t lock;
-+ struct workqueue_struct *wq;
-+ struct work_struct work;
-+
-+ const u8 *tx;
-+ u8 *rx;
-+ unsigned int tx_todo;
-+ unsigned int rx_todo;
-+ unsigned int bits_per_word;
-+ unsigned int speed_hz;
-+ unsigned int tx_fifo_size;
-+ unsigned int rx_fifo_size;
-+ unsigned int base_cs;
-+};
-+
-+static u32 lantiq_ssc_readl(const struct lantiq_ssc_spi *spi, u32 reg)
-+{
-+ return __raw_readl(spi->regbase + reg);
-+}
-+
-+static void lantiq_ssc_writel(const struct lantiq_ssc_spi *spi, u32 val,
-+ u32 reg)
-+{
-+ __raw_writel(val, spi->regbase + reg);
-+}
-+
-+static void lantiq_ssc_maskl(const struct lantiq_ssc_spi *spi, u32 clr,
-+ u32 set, u32 reg)
-+{
-+ u32 val = __raw_readl(spi->regbase + reg);
-+
-+ val &= ~clr;
-+ val |= set;
-+ __raw_writel(val, spi->regbase + reg);
-+}
-+
-+static unsigned int tx_fifo_level(const struct lantiq_ssc_spi *spi)
-+{
-+ u32 fstat = lantiq_ssc_readl(spi, SPI_FSTAT);
-+
-+ return (fstat & SPI_FSTAT_TXFFL_M) >> SPI_FSTAT_TXFFL_S;
-+}
-+
-+static unsigned int rx_fifo_level(const struct lantiq_ssc_spi *spi)
-+{
-+ u32 fstat = lantiq_ssc_readl(spi, SPI_FSTAT);
-+
-+ return fstat & SPI_FSTAT_RXFFL_M;
-+}
-+
-+static unsigned int tx_fifo_free(const struct lantiq_ssc_spi *spi)
-+{
-+ return spi->tx_fifo_size - tx_fifo_level(spi);
-+}
-+
-+static void rx_fifo_reset(const struct lantiq_ssc_spi *spi)
-+{
-+ u32 val = spi->rx_fifo_size << SPI_RXFCON_RXFITL_S;
-+
-+ val |= SPI_RXFCON_RXFEN | SPI_RXFCON_RXFLU;
-+ lantiq_ssc_writel(spi, val, SPI_RXFCON);
-+}
-+
-+static void tx_fifo_reset(const struct lantiq_ssc_spi *spi)
-+{
-+ u32 val = 1 << SPI_TXFCON_TXFITL_S;
-+
-+ val |= SPI_TXFCON_TXFEN | SPI_TXFCON_TXFLU;
-+ lantiq_ssc_writel(spi, val, SPI_TXFCON);
-+}
-+
-+static void rx_fifo_flush(const struct lantiq_ssc_spi *spi)
-+{
-+ lantiq_ssc_maskl(spi, 0, SPI_RXFCON_RXFLU, SPI_RXFCON);
-+}
-+
-+static void tx_fifo_flush(const struct lantiq_ssc_spi *spi)
-+{
-+ lantiq_ssc_maskl(spi, 0, SPI_TXFCON_TXFLU, SPI_TXFCON);
-+}
-+
-+static void hw_enter_config_mode(const struct lantiq_ssc_spi *spi)
-+{
-+ lantiq_ssc_writel(spi, SPI_WHBSTATE_CLREN, SPI_WHBSTATE);
-+}
-+
-+static void hw_enter_active_mode(const struct lantiq_ssc_spi *spi)
-+{
-+ lantiq_ssc_writel(spi, SPI_WHBSTATE_SETEN, SPI_WHBSTATE);
-+}
-+
-+static void hw_setup_speed_hz(const struct lantiq_ssc_spi *spi,
-+ unsigned int max_speed_hz)
-+{
-+ u32 spi_clk, brt;
-+
-+ /*
-+ * SPI module clock is derived from FPI bus clock dependent on
-+ * divider value in CLC.RMS which is always set to 1.
-+ *
-+ * f_SPI
-+ * baudrate = --------------
-+ * 2 * (BR + 1)
-+ */
-+ spi_clk = clk_get_rate(spi->fpi_clk) / 2;
-+
-+ if (max_speed_hz > spi_clk)
-+ brt = 0;
-+ else
-+ brt = spi_clk / max_speed_hz - 1;
-+
-+ if (brt > 0xFFFF)
-+ brt = 0xFFFF;
-+
-+ dev_dbg(spi->dev, "spi_clk %u, max_speed_hz %u, brt %u\n",
-+ spi_clk, max_speed_hz, brt);
-+
-+ lantiq_ssc_writel(spi, brt, SPI_BRT);
-+}
-+
-+static void hw_setup_bits_per_word(const struct lantiq_ssc_spi *spi,
-+ unsigned int bits_per_word)
-+{
-+ u32 bm;
-+
-+ /* CON.BM value = bits_per_word - 1 */
-+ bm = (bits_per_word - 1) << SPI_CON_BM_S;
-+
-+ lantiq_ssc_maskl(spi, SPI_CON_BM_M, bm, SPI_CON);
-+}
-+
-+static void hw_setup_clock_mode(const struct lantiq_ssc_spi *spi,
-+ unsigned int mode)
-+{
-+ u32 con_set = 0, con_clr = 0;
-+
-+ /*
-+ * SPI mode mapping in CON register:
-+ * Mode CPOL CPHA CON.PO CON.PH
-+ * 0 0 0 0 1
-+ * 1 0 1 0 0
-+ * 2 1 0 1 1
-+ * 3 1 1 1 0
-+ */
-+ if (mode & SPI_CPHA)
-+ con_clr |= SPI_CON_PH;
-+ else
-+ con_set |= SPI_CON_PH;
-+
-+ if (mode & SPI_CPOL)
-+ con_set |= SPI_CON_PO | SPI_CON_IDLE;
-+ else
-+ con_clr |= SPI_CON_PO | SPI_CON_IDLE;
-+
-+ /* Set heading control */
-+ if (mode & SPI_LSB_FIRST)
-+ con_clr |= SPI_CON_HB;
-+ else
-+ con_set |= SPI_CON_HB;
-+
-+ /* Set loopback mode */
-+ if (mode & SPI_LOOP)
-+ con_set |= SPI_CON_LB;
-+ else
-+ con_clr |= SPI_CON_LB;
-+
-+ lantiq_ssc_maskl(spi, con_clr, con_set, SPI_CON);
-+}
-+
-+static void lantiq_ssc_hw_init(const struct lantiq_ssc_spi *spi)
-+{
-+ const struct lantiq_ssc_hwcfg *hwcfg = spi->hwcfg;
-+
-+ /*
-+ * Set clock divider for run mode to 1 to
-+ * run at same frequency as FPI bus
-+ */
-+ lantiq_ssc_writel(spi, 1 << SPI_CLC_RMC_S, SPI_CLC);
-+
-+ /* Put controller into config mode */
-+ hw_enter_config_mode(spi);
-+
-+ /* Clear error flags */
-+ lantiq_ssc_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE);
-+
-+ /* Enable error checking, disable TX/RX */
-+ lantiq_ssc_writel(spi, SPI_CON_RUEN | SPI_CON_AEN | SPI_CON_TEN |
-+ SPI_CON_REN | SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON);
-+
-+ /* Setup default SPI mode */
-+ hw_setup_bits_per_word(spi, spi->bits_per_word);
-+ hw_setup_clock_mode(spi, SPI_MODE_0);
-+
-+ /* Enable master mode and clear error flags */
-+ lantiq_ssc_writel(spi, SPI_WHBSTATE_SETMS | SPI_WHBSTATE_CLR_ERRORS,
-+ SPI_WHBSTATE);
-+
-+ /* Reset GPIO/CS registers */
-+ lantiq_ssc_writel(spi, 0, SPI_GPOCON);
-+ lantiq_ssc_writel(spi, 0xFF00, SPI_FPGO);
-+
-+ /* Enable and flush FIFOs */
-+ rx_fifo_reset(spi);
-+ tx_fifo_reset(spi);
-+
-+ /* Enable interrupts */
-+ lantiq_ssc_writel(spi, hwcfg->irnen_t | hwcfg->irnen_r | SPI_IRNEN_E,
-+ SPI_IRNEN);
-+}
-+
-+static int lantiq_ssc_setup(struct spi_device *spidev)
-+{
-+ struct spi_master *master = spidev->master;
-+ struct lantiq_ssc_spi *spi = spi_master_get_devdata(master);
-+ unsigned int cs = spidev->chip_select;
-+ u32 gpocon;
-+
-+ /* GPIOs are used for CS */
-+ if (gpio_is_valid(spidev->cs_gpio))
-+ return 0;
-+
-+ dev_dbg(spi->dev, "using internal chipselect %u\n", cs);
-+
-+ if (cs < spi->base_cs) {
-+ dev_err(spi->dev,
-+ "chipselect %i too small (min %i)\n", cs, spi->base_cs);
-+ return -EINVAL;
-+ }
-+
-+ /* set GPO pin to CS mode */
-+ gpocon = 1 << ((cs - spi->base_cs) + SPI_GPOCON_ISCSBN_S);
-+
-+ /* invert GPO pin */
-+ if (spidev->mode & SPI_CS_HIGH)
-+ gpocon |= 1 << (cs - spi->base_cs);
-+
-+ lantiq_ssc_maskl(spi, 0, gpocon, SPI_GPOCON);
-+
-+ return 0;
-+}
-+
-+static int lantiq_ssc_prepare_message(struct spi_master *master,
-+ struct spi_message *message)
-+{
-+ struct lantiq_ssc_spi *spi = spi_master_get_devdata(master);
-+
-+ hw_enter_config_mode(spi);
-+ hw_setup_clock_mode(spi, message->spi->mode);
-+ hw_enter_active_mode(spi);
-+
-+ return 0;
-+}
-+
-+static void hw_setup_transfer(struct lantiq_ssc_spi *spi,
-+ struct spi_device *spidev, struct spi_transfer *t)
-+{
-+ unsigned int speed_hz = t->speed_hz;
-+ unsigned int bits_per_word = t->bits_per_word;
-+ u32 con;
-+
-+ if (bits_per_word != spi->bits_per_word ||
-+ speed_hz != spi->speed_hz) {
-+ hw_enter_config_mode(spi);
-+ hw_setup_speed_hz(spi, speed_hz);
-+ hw_setup_bits_per_word(spi, bits_per_word);
-+ hw_enter_active_mode(spi);
-+
-+ spi->speed_hz = speed_hz;
-+ spi->bits_per_word = bits_per_word;
-+ }
-+
-+ /* Configure transmitter and receiver */
-+ con = lantiq_ssc_readl(spi, SPI_CON);
-+ if (t->tx_buf)
-+ con &= ~SPI_CON_TXOFF;
-+ else
-+ con |= SPI_CON_TXOFF;
-+
-+ if (t->rx_buf)
-+ con &= ~SPI_CON_RXOFF;
-+ else
-+ con |= SPI_CON_RXOFF;
-+
-+ lantiq_ssc_writel(spi, con, SPI_CON);
-+}
-+
-+static int lantiq_ssc_unprepare_message(struct spi_master *master,
-+ struct spi_message *message)
-+{
-+ struct lantiq_ssc_spi *spi = spi_master_get_devdata(master);
-+
-+ flush_workqueue(spi->wq);
-+
-+ /* Disable transmitter and receiver while idle */
-+ lantiq_ssc_maskl(spi, 0, SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON);
-+
-+ return 0;
-+}
-+
-+static void tx_fifo_write(struct lantiq_ssc_spi *spi)
-+{
-+ const u8 *tx8;
-+ const u16 *tx16;
-+ const u32 *tx32;
-+ u32 data;
-+ unsigned int tx_free = tx_fifo_free(spi);
-+
-+ while (spi->tx_todo && tx_free) {
-+ switch (spi->bits_per_word) {
-+ case 2 ... 8:
-+ tx8 = spi->tx;
-+ data = *tx8;
-+ spi->tx_todo--;
-+ spi->tx++;
-+ break;
-+ case 16:
-+ tx16 = (u16 *) spi->tx;
-+ data = *tx16;
-+ spi->tx_todo -= 2;
-+ spi->tx += 2;
-+ break;
-+ case 32:
-+ tx32 = (u32 *) spi->tx;
-+ data = *tx32;
-+ spi->tx_todo -= 4;
-+ spi->tx += 4;
-+ break;
-+ default:
-+ WARN_ON(1);
-+ data = 0;
-+ break;
-+ }
-+
-+ lantiq_ssc_writel(spi, data, SPI_TB);
-+ tx_free--;
-+ }
-+}
-+
-+static void rx_fifo_read_full_duplex(struct lantiq_ssc_spi *spi)
-+{
-+ u8 *rx8;
-+ u16 *rx16;
-+ u32 *rx32;
-+ u32 data;
-+ unsigned int rx_fill = rx_fifo_level(spi);
-+
-+ while (rx_fill) {
-+ data = lantiq_ssc_readl(spi, SPI_RB);
-+
-+ switch (spi->bits_per_word) {
-+ case 2 ... 8:
-+ rx8 = spi->rx;
-+ *rx8 = data;
-+ spi->rx_todo--;
-+ spi->rx++;
-+ break;
-+ case 16:
-+ rx16 = (u16 *) spi->rx;
-+ *rx16 = data;
-+ spi->rx_todo -= 2;
-+ spi->rx += 2;
-+ break;
-+ case 32:
-+ rx32 = (u32 *) spi->rx;
-+ *rx32 = data;
-+ spi->rx_todo -= 4;
-+ spi->rx += 4;
-+ break;
-+ default:
-+ WARN_ON(1);
-+ break;
-+ }
-+
-+ rx_fill--;
-+ }
-+}
-+
-+static void rx_fifo_read_half_duplex(struct lantiq_ssc_spi *spi)
-+{
-+ u32 data, *rx32;
-+ u8 *rx8;
-+ unsigned int rxbv, shift;
-+ unsigned int rx_fill = rx_fifo_level(spi);
-+
-+ /*
-+ * In RX-only mode the bits per word value is ignored by HW. A value
-+ * of 32 is used instead. Thus all 4 bytes per FIFO must be read.
-+ * If remaining RX bytes are less than 4, the FIFO must be read
-+ * differently. The amount of received and valid bytes is indicated
-+ * by STAT.RXBV register value.
-+ */
-+ while (rx_fill) {
-+ if (spi->rx_todo < 4) {
-+ rxbv = (lantiq_ssc_readl(spi, SPI_STAT) &
-+ SPI_STAT_RXBV_M) >> SPI_STAT_RXBV_S;
-+ data = lantiq_ssc_readl(spi, SPI_RB);
-+
-+ shift = (rxbv - 1) * 8;
-+ rx8 = spi->rx;
-+
-+ while (rxbv) {
-+ *rx8++ = (data >> shift) & 0xFF;
-+ rxbv--;
-+ shift -= 8;
-+ spi->rx_todo--;
-+ spi->rx++;
-+ }
-+ } else {
-+ data = lantiq_ssc_readl(spi, SPI_RB);
-+ rx32 = (u32 *) spi->rx;
-+
-+ *rx32++ = data;
-+ spi->rx_todo -= 4;
-+ spi->rx += 4;
-+ }
-+ rx_fill--;
-+ }
-+}
-+
-+static void rx_request(struct lantiq_ssc_spi *spi)
-+{
-+ unsigned int rxreq, rxreq_max;
-+
-+ /*
-+ * To avoid receive overflows at high clocks it is better to request
-+ * only the amount of bytes that fits into all FIFOs. This value
-+ * depends on the FIFO size implemented in hardware.
-+ */
-+ rxreq = spi->rx_todo;
-+ rxreq_max = spi->rx_fifo_size * 4;
-+ if (rxreq > rxreq_max)
-+ rxreq = rxreq_max;
-+
-+ lantiq_ssc_writel(spi, rxreq, SPI_RXREQ);
-+}
-+
-+static irqreturn_t lantiq_ssc_xmit_interrupt(int irq, void *data)
-+{
-+ struct lantiq_ssc_spi *spi = data;
-+
-+ if (spi->tx) {
-+ if (spi->rx && spi->rx_todo)
-+ rx_fifo_read_full_duplex(spi);
-+
-+ if (spi->tx_todo)
-+ tx_fifo_write(spi);
-+ else if (!tx_fifo_level(spi))
-+ goto completed;
-+ } else if (spi->rx) {
-+ if (spi->rx_todo) {
-+ rx_fifo_read_half_duplex(spi);
-+
-+ if (spi->rx_todo)
-+ rx_request(spi);
-+ else
-+ goto completed;
-+ } else {
-+ goto completed;
-+ }
-+ }
-+
-+ return IRQ_HANDLED;
-+
-+completed:
-+ queue_work(spi->wq, &spi->work);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t lantiq_ssc_err_interrupt(int irq, void *data)
-+{
-+ struct lantiq_ssc_spi *spi = data;
-+ u32 stat = lantiq_ssc_readl(spi, SPI_STAT);
-+
-+ if (!(stat & SPI_STAT_ERRORS))
-+ return IRQ_NONE;
-+
-+ if (stat & SPI_STAT_RUE)
-+ dev_err(spi->dev, "receive underflow error\n");
-+ if (stat & SPI_STAT_TUE)
-+ dev_err(spi->dev, "transmit underflow error\n");
-+ if (stat & SPI_STAT_AE)
-+ dev_err(spi->dev, "abort error\n");
-+ if (stat & SPI_STAT_RE)
-+ dev_err(spi->dev, "receive overflow error\n");
-+ if (stat & SPI_STAT_TE)
-+ dev_err(spi->dev, "transmit overflow error\n");
-+ if (stat & SPI_STAT_ME)
-+ dev_err(spi->dev, "mode error\n");
-+
-+ /* Clear error flags */
-+ lantiq_ssc_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE);
-+
-+ /* set bad status so it can be retried */
-+ if (spi->master->cur_msg)
-+ spi->master->cur_msg->status = -EIO;
-+ queue_work(spi->wq, &spi->work);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int transfer_start(struct lantiq_ssc_spi *spi, struct spi_device *spidev,
-+ struct spi_transfer *t)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&spi->lock, flags);
-+
-+ spi->tx = t->tx_buf;
-+ spi->rx = t->rx_buf;
-+
-+ if (t->tx_buf) {
-+ spi->tx_todo = t->len;
-+
-+ /* initially fill TX FIFO */
-+ tx_fifo_write(spi);
-+ }
-+
-+ if (spi->rx) {
-+ spi->rx_todo = t->len;
-+
-+ /* start shift clock in RX-only mode */
-+ if (!spi->tx)
-+ rx_request(spi);
-+ }
-+
-+ spin_unlock_irqrestore(&spi->lock, flags);
-+
-+ return t->len;
-+}
-+
-+/*
-+ * The driver only gets an interrupt when the FIFO is empty, but there
-+ * is an additional shift register from which the data is written to
-+ * the wire. We get the last interrupt when the controller starts to
-+ * write the last word to the wire, not when it is finished. Do busy
-+ * waiting till it finishes.
-+ */
-+static void lantiq_ssc_bussy_work(struct work_struct *work)
-+{
-+ struct lantiq_ssc_spi *spi;
-+ unsigned long long timeout = 8LL * 1000LL;
-+ unsigned long end;
-+
-+ spi = container_of(work, typeof(*spi), work);
-+
-+ do_div(timeout, spi->speed_hz);
-+ timeout += timeout + 100; /* some tolerance */
-+
-+ end = jiffies + msecs_to_jiffies(timeout);
-+ do {
-+ u32 stat = lantiq_ssc_readl(spi, SPI_STAT);
-+
-+ if (!(stat & SPI_STAT_BSY)) {
-+ spi_finalize_current_transfer(spi->master);
-+ return;
-+ }
-+
-+ cond_resched();
-+ } while (!time_after_eq(jiffies, end));
-+
-+ if (spi->master->cur_msg)
-+ spi->master->cur_msg->status = -EIO;
-+ spi_finalize_current_transfer(spi->master);
-+}
-+
-+static void lantiq_ssc_handle_err(struct spi_master *master,
-+ struct spi_message *message)
-+{
-+ struct lantiq_ssc_spi *spi = spi_master_get_devdata(master);
-+
-+ /* flush FIFOs on timeout */
-+ rx_fifo_flush(spi);
-+ tx_fifo_flush(spi);
-+}
-+
-+static void lantiq_ssc_set_cs(struct spi_device *spidev, bool enable)
-+{
-+ struct lantiq_ssc_spi *spi = spi_master_get_devdata(spidev->master);
-+ unsigned int cs = spidev->chip_select;
-+ u32 fgpo;
-+
-+ if (!!(spidev->mode & SPI_CS_HIGH) == enable)
-+ fgpo = (1 << (cs - spi->base_cs));
-+ else
-+ fgpo = (1 << (cs - spi->base_cs + SPI_FGPO_SETOUTN_S));
-+
-+ lantiq_ssc_writel(spi, fgpo, SPI_FPGO);
-+}
-+
-+static int lantiq_ssc_transfer_one(struct spi_master *master,
-+ struct spi_device *spidev,
-+ struct spi_transfer *t)
-+{
-+ struct lantiq_ssc_spi *spi = spi_master_get_devdata(master);
-+
-+ hw_setup_transfer(spi, spidev, t);
-+
-+ return transfer_start(spi, spidev, t);
-+}
-+
-+static const struct lantiq_ssc_hwcfg lantiq_ssc_xway = {
-+ .irnen_r = SPI_IRNEN_R_XWAY,
-+ .irnen_t = SPI_IRNEN_T_XWAY,
-+};
-+
-+static const struct lantiq_ssc_hwcfg lantiq_ssc_xrx = {
-+ .irnen_r = SPI_IRNEN_R_XRX,
-+ .irnen_t = SPI_IRNEN_T_XRX,
-+};
-+
-+static const struct of_device_id lantiq_ssc_match[] = {
-+ { .compatible = "lantiq,ase-spi", .data = &lantiq_ssc_xway, },
-+ { .compatible = "lantiq,falcon-spi", .data = &lantiq_ssc_xrx, },
-+ { .compatible = "lantiq,xrx100-spi", .data = &lantiq_ssc_xrx, },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, lantiq_ssc_match);
-+
-+static int lantiq_ssc_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct spi_master *master;
-+ struct resource *res;
-+ struct lantiq_ssc_spi *spi;
-+ const struct lantiq_ssc_hwcfg *hwcfg;
-+ const struct of_device_id *match;
-+ int err, rx_irq, tx_irq, err_irq;
-+ u32 id, supports_dma, revision;
-+ unsigned int num_cs;
-+
-+ match = of_match_device(lantiq_ssc_match, dev);
-+ if (!match) {
-+ dev_err(dev, "no device match\n");
-+ return -EINVAL;
-+ }
-+ hwcfg = match->data;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res) {
-+ dev_err(dev, "failed to get resources\n");
-+ return -ENXIO;
-+ }
-+
-+ rx_irq = platform_get_irq_byname(pdev, SPI_RX_IRQ_NAME);
-+ if (rx_irq < 0) {
-+ dev_err(dev, "failed to get %s\n", SPI_RX_IRQ_NAME);
-+ return -ENXIO;
-+ }
-+
-+ tx_irq = platform_get_irq_byname(pdev, SPI_TX_IRQ_NAME);
-+ if (tx_irq < 0) {
-+ dev_err(dev, "failed to get %s\n", SPI_TX_IRQ_NAME);
-+ return -ENXIO;
-+ }
-+
-+ err_irq = platform_get_irq_byname(pdev, SPI_ERR_IRQ_NAME);
-+ if (err_irq < 0) {
-+ dev_err(dev, "failed to get %s\n", SPI_ERR_IRQ_NAME);
-+ return -ENXIO;
-+ }
-+
-+ master = spi_alloc_master(dev, sizeof(struct lantiq_ssc_spi));
-+ if (!master)
-+ return -ENOMEM;
-+
-+ spi = spi_master_get_devdata(master);
-+ spi->master = master;
-+ spi->dev = dev;
-+ spi->hwcfg = hwcfg;
-+ platform_set_drvdata(pdev, spi);
-+
-+ spi->regbase = devm_ioremap_resource(dev, res);
-+ if (IS_ERR(spi->regbase)) {
-+ err = PTR_ERR(spi->regbase);
-+ goto err_master_put;
-+ }
-+
-+ err = devm_request_irq(dev, rx_irq, lantiq_ssc_xmit_interrupt,
-+ 0, SPI_RX_IRQ_NAME, spi);
-+ if (err)
-+ goto err_master_put;
-+
-+ err = devm_request_irq(dev, tx_irq, lantiq_ssc_xmit_interrupt,
-+ 0, SPI_TX_IRQ_NAME, spi);
-+ if (err)
-+ goto err_master_put;
-+
-+ err = devm_request_irq(dev, err_irq, lantiq_ssc_err_interrupt,
-+ 0, SPI_ERR_IRQ_NAME, spi);
-+ if (err)
-+ goto err_master_put;
-+
-+ spi->spi_clk = devm_clk_get(dev, "gate");
-+ if (IS_ERR(spi->spi_clk)) {
-+ err = PTR_ERR(spi->spi_clk);
-+ goto err_master_put;
-+ }
-+ err = clk_prepare_enable(spi->spi_clk);
-+ if (err)
-+ goto err_master_put;
-+
-+ /*
-+ * Use the old clk_get_fpi() function on Lantiq platform, till it
-+ * supports common clk.
-+ */
-+#if defined(CONFIG_LANTIQ) && !defined(CONFIG_COMMON_CLK)
-+ spi->fpi_clk = clk_get_fpi();
-+#else
-+ spi->fpi_clk = clk_get(dev, "freq");
-+#endif
-+ if (IS_ERR(spi->fpi_clk)) {
-+ err = PTR_ERR(spi->fpi_clk);
-+ goto err_clk_disable;
-+ }
-+
-+ num_cs = 8;
-+ of_property_read_u32(pdev->dev.of_node, "num-cs", &num_cs);
-+
-+ spi->base_cs = 1;
-+ of_property_read_u32(pdev->dev.of_node, "base-cs", &spi->base_cs);
-+
-+ spin_lock_init(&spi->lock);
-+ spi->bits_per_word = 8;
-+ spi->speed_hz = 0;
-+
-+ master->dev.of_node = pdev->dev.of_node;
-+ master->num_chipselect = num_cs;
-+ master->setup = lantiq_ssc_setup;
-+ master->set_cs = lantiq_ssc_set_cs;
-+ master->handle_err = lantiq_ssc_handle_err;
-+ master->prepare_message = lantiq_ssc_prepare_message;
-+ master->unprepare_message = lantiq_ssc_unprepare_message;
-+ master->transfer_one = lantiq_ssc_transfer_one;
-+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_CS_HIGH |
-+ SPI_LOOP;
-+ master->bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 8) |
-+ SPI_BPW_MASK(16) | SPI_BPW_MASK(32);
-+
-+ spi->wq = alloc_ordered_workqueue(dev_name(dev), 0);
-+ if (!spi->wq) {
-+ err = -ENOMEM;
-+ goto err_clk_put;
-+ }
-+ INIT_WORK(&spi->work, lantiq_ssc_bussy_work);
-+
-+ id = lantiq_ssc_readl(spi, SPI_ID);
-+ spi->tx_fifo_size = (id & SPI_ID_TXFS_M) >> SPI_ID_TXFS_S;
-+ spi->rx_fifo_size = (id & SPI_ID_RXFS_M) >> SPI_ID_RXFS_S;
-+ supports_dma = (id & SPI_ID_CFG_M) >> SPI_ID_CFG_S;
-+ revision = id & SPI_ID_REV_M;
-+
-+ lantiq_ssc_hw_init(spi);
-+
-+ dev_info(dev,
-+ "Lantiq SSC SPI controller (Rev %i, TXFS %u, RXFS %u, DMA %u)\n",
-+ revision, spi->tx_fifo_size, spi->rx_fifo_size, supports_dma);
-+
-+ err = devm_spi_register_master(dev, master);
-+ if (err) {
-+ dev_err(dev, "failed to register spi_master\n");
-+ goto err_wq_destroy;
-+ }
-+
-+ return 0;
-+
-+err_wq_destroy:
-+ destroy_workqueue(spi->wq);
-+err_clk_put:
-+ clk_put(spi->fpi_clk);
-+err_clk_disable:
-+ clk_disable_unprepare(spi->spi_clk);
-+err_master_put:
-+ spi_master_put(master);
-+
-+ return err;
-+}
-+
-+static int lantiq_ssc_remove(struct platform_device *pdev)
-+{
-+ struct lantiq_ssc_spi *spi = platform_get_drvdata(pdev);
-+
-+ lantiq_ssc_writel(spi, 0, SPI_IRNEN);
-+ lantiq_ssc_writel(spi, 0, SPI_CLC);
-+ rx_fifo_flush(spi);
-+ tx_fifo_flush(spi);
-+ hw_enter_config_mode(spi);
-+
-+ destroy_workqueue(spi->wq);
-+ clk_disable_unprepare(spi->spi_clk);
-+ clk_put(spi->fpi_clk);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver lantiq_ssc_driver = {
-+ .probe = lantiq_ssc_probe,
-+ .remove = lantiq_ssc_remove,
-+ .driver = {
-+ .name = "spi-lantiq-ssc",
-+ .owner = THIS_MODULE,
-+ .of_match_table = lantiq_ssc_match,
-+ },
-+};
-+module_platform_driver(lantiq_ssc_driver);
-+
-+MODULE_DESCRIPTION("Lantiq SSC SPI controller driver");
-+MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck at gmail.com>");
-+MODULE_AUTHOR("Hauke Mehrtens <hauke at hauke-m.de>");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:spi-lantiq-ssc");
diff --git a/target/linux/lantiq/patches-4.14/0091-spi-lantiq-ssc-fix-platform_no_drv_owner.cocci-warni.patch b/target/linux/lantiq/patches-4.14/0091-spi-lantiq-ssc-fix-platform_no_drv_owner.cocci-warni.patch
deleted file mode 100644
index e81f97f..0000000
--- a/target/linux/lantiq/patches-4.14/0091-spi-lantiq-ssc-fix-platform_no_drv_owner.cocci-warni.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From ba6e1e39969fa5435127a632757e2906caca7730 Mon Sep 17 00:00:00 2001
-From: kbuild test robot <fengguang.wu at intel.com>
-Date: Mon, 20 Feb 2017 01:33:10 +0800
-Subject: spi: lantiq-ssc: fix platform_no_drv_owner.cocci warnings
-
-drivers/spi/spi-lantiq-ssc.c:973:3-8: No need to set .owner here. The core will do it.
-
- Remove .owner field if calls are used which set it automatically
-
-Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
-
-Signed-off-by: Fengguang Wu <fengguang.wu at intel.com>
-Acked-by: Hauke Mehrtens <hauke at hauke-m.de>
-Signed-off-by: Mark Brown <broonie at kernel.org>
----
- drivers/spi/spi-lantiq-ssc.c | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/drivers/spi/spi-lantiq-ssc.c
-+++ b/drivers/spi/spi-lantiq-ssc.c
-@@ -970,7 +970,6 @@ static struct platform_driver lantiq_ssc
- .remove = lantiq_ssc_remove,
- .driver = {
- .name = "spi-lantiq-ssc",
-- .owner = THIS_MODULE,
- .of_match_table = lantiq_ssc_match,
- },
- };
diff --git a/target/linux/lantiq/patches-4.14/0092-spi-lantiq-ssc-add-LTQ_-prefix-to-defines.patch b/target/linux/lantiq/patches-4.14/0092-spi-lantiq-ssc-add-LTQ_-prefix-to-defines.patch
deleted file mode 100644
index 9bcde3c..0000000
--- a/target/linux/lantiq/patches-4.14/0092-spi-lantiq-ssc-add-LTQ_-prefix-to-defines.patch
+++ /dev/null
@@ -1,723 +0,0 @@
-From 1aa83e0a2821cd7f4e8f3ddb367859f52e468bf1 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke at hauke-m.de>
-Date: Mon, 27 Feb 2017 23:21:25 +0100
-Subject: spi: lantiq-ssc: add LTQ_ prefix to defines
-
-The blackfin architecture has a SPI_STAT define which conflicts with
-the define from the spi-lantiq-ssc driver in compile test mode. Fix
-this by adding a prefix in front of every define.
-
-Reported-by: kbuild test robot <fengguang.wu at intel.com>
-Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
-Signed-off-by: Mark Brown <broonie at kernel.org>
----
- drivers/spi/spi-lantiq-ssc.c | 437 ++++++++++++++++++++++---------------------
- 1 file changed, 222 insertions(+), 215 deletions(-)
-
---- a/drivers/spi/spi-lantiq-ssc.c
-+++ b/drivers/spi/spi-lantiq-ssc.c
-@@ -26,136 +26,140 @@
- #include <lantiq_soc.h>
- #endif
-
--#define SPI_RX_IRQ_NAME "spi_rx"
--#define SPI_TX_IRQ_NAME "spi_tx"
--#define SPI_ERR_IRQ_NAME "spi_err"
--#define SPI_FRM_IRQ_NAME "spi_frm"
--
--#define SPI_CLC 0x00
--#define SPI_PISEL 0x04
--#define SPI_ID 0x08
--#define SPI_CON 0x10
--#define SPI_STAT 0x14
--#define SPI_WHBSTATE 0x18
--#define SPI_TB 0x20
--#define SPI_RB 0x24
--#define SPI_RXFCON 0x30
--#define SPI_TXFCON 0x34
--#define SPI_FSTAT 0x38
--#define SPI_BRT 0x40
--#define SPI_BRSTAT 0x44
--#define SPI_SFCON 0x60
--#define SPI_SFSTAT 0x64
--#define SPI_GPOCON 0x70
--#define SPI_GPOSTAT 0x74
--#define SPI_FPGO 0x78
--#define SPI_RXREQ 0x80
--#define SPI_RXCNT 0x84
--#define SPI_DMACON 0xec
--#define SPI_IRNEN 0xf4
--#define SPI_IRNICR 0xf8
--#define SPI_IRNCR 0xfc
--
--#define SPI_CLC_SMC_S 16 /* Clock divider for sleep mode */
--#define SPI_CLC_SMC_M (0xFF << SPI_CLC_SMC_S)
--#define SPI_CLC_RMC_S 8 /* Clock divider for normal run mode */
--#define SPI_CLC_RMC_M (0xFF << SPI_CLC_RMC_S)
--#define SPI_CLC_DISS BIT(1) /* Disable status bit */
--#define SPI_CLC_DISR BIT(0) /* Disable request bit */
--
--#define SPI_ID_TXFS_S 24 /* Implemented TX FIFO size */
--#define SPI_ID_TXFS_M (0x3F << SPI_ID_TXFS_S)
--#define SPI_ID_RXFS_S 16 /* Implemented RX FIFO size */
--#define SPI_ID_RXFS_M (0x3F << SPI_ID_RXFS_S)
--#define SPI_ID_MOD_S 8 /* Module ID */
--#define SPI_ID_MOD_M (0xff << SPI_ID_MOD_S)
--#define SPI_ID_CFG_S 5 /* DMA interface support */
--#define SPI_ID_CFG_M (1 << SPI_ID_CFG_S)
--#define SPI_ID_REV_M 0x1F /* Hardware revision number */
--
--#define SPI_CON_BM_S 16 /* Data width selection */
--#define SPI_CON_BM_M (0x1F << SPI_CON_BM_S)
--#define SPI_CON_EM BIT(24) /* Echo mode */
--#define SPI_CON_IDLE BIT(23) /* Idle bit value */
--#define SPI_CON_ENBV BIT(22) /* Enable byte valid control */
--#define SPI_CON_RUEN BIT(12) /* Receive underflow error enable */
--#define SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */
--#define SPI_CON_AEN BIT(10) /* Abort error enable */
--#define SPI_CON_REN BIT(9) /* Receive overflow error enable */
--#define SPI_CON_TEN BIT(8) /* Transmit overflow error enable */
--#define SPI_CON_LB BIT(7) /* Loopback control */
--#define SPI_CON_PO BIT(6) /* Clock polarity control */
--#define SPI_CON_PH BIT(5) /* Clock phase control */
--#define SPI_CON_HB BIT(4) /* Heading control */
--#define SPI_CON_RXOFF BIT(1) /* Switch receiver off */
--#define SPI_CON_TXOFF BIT(0) /* Switch transmitter off */
--
--#define SPI_STAT_RXBV_S 28
--#define SPI_STAT_RXBV_M (0x7 << SPI_STAT_RXBV_S)
--#define SPI_STAT_BSY BIT(13) /* Busy flag */
--#define SPI_STAT_RUE BIT(12) /* Receive underflow error flag */
--#define SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */
--#define SPI_STAT_AE BIT(10) /* Abort error flag */
--#define SPI_STAT_RE BIT(9) /* Receive error flag */
--#define SPI_STAT_TE BIT(8) /* Transmit error flag */
--#define SPI_STAT_ME BIT(7) /* Mode error flag */
--#define SPI_STAT_MS BIT(1) /* Master/slave select bit */
--#define SPI_STAT_EN BIT(0) /* Enable bit */
--#define SPI_STAT_ERRORS (SPI_STAT_ME | SPI_STAT_TE | SPI_STAT_RE | \
-- SPI_STAT_AE | SPI_STAT_TUE | SPI_STAT_RUE)
--
--#define SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */
--#define SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */
--#define SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */
--#define SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */
--#define SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error flag */
--#define SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */
--#define SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */
--#define SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */
--#define SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */
--#define SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */
--#define SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */
--#define SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */
--#define SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */
--#define SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */
--#define SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */
--#define SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */
--#define SPI_WHBSTATE_CLR_ERRORS (SPI_WHBSTATE_CLRRUE | SPI_WHBSTATE_CLRME | \
-- SPI_WHBSTATE_CLRTE | SPI_WHBSTATE_CLRRE | \
-- SPI_WHBSTATE_CLRAE | SPI_WHBSTATE_CLRTUE)
--
--#define SPI_RXFCON_RXFITL_S 8 /* FIFO interrupt trigger level */
--#define SPI_RXFCON_RXFITL_M (0x3F << SPI_RXFCON_RXFITL_S)
--#define SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */
--#define SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */
--
--#define SPI_TXFCON_TXFITL_S 8 /* FIFO interrupt trigger level */
--#define SPI_TXFCON_TXFITL_M (0x3F << SPI_TXFCON_TXFITL_S)
--#define SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */
--#define SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */
--
--#define SPI_FSTAT_RXFFL_S 0
--#define SPI_FSTAT_RXFFL_M (0x3f << SPI_FSTAT_RXFFL_S)
--#define SPI_FSTAT_TXFFL_S 8
--#define SPI_FSTAT_TXFFL_M (0x3f << SPI_FSTAT_TXFFL_S)
--
--#define SPI_GPOCON_ISCSBN_S 8
--#define SPI_GPOCON_INVOUTN_S 0
--
--#define SPI_FGPO_SETOUTN_S 8
--#define SPI_FGPO_CLROUTN_S 0
--
--#define SPI_RXREQ_RXCNT_M 0xFFFF /* Receive count value */
--#define SPI_RXCNT_TODO_M 0xFFFF /* Recevie to-do value */
--
--#define SPI_IRNEN_TFI BIT(4) /* TX finished interrupt */
--#define SPI_IRNEN_F BIT(3) /* Frame end interrupt request */
--#define SPI_IRNEN_E BIT(2) /* Error end interrupt request */
--#define SPI_IRNEN_T_XWAY BIT(1) /* Transmit end interrupt request */
--#define SPI_IRNEN_R_XWAY BIT(0) /* Receive end interrupt request */
--#define SPI_IRNEN_R_XRX BIT(1) /* Transmit end interrupt request */
--#define SPI_IRNEN_T_XRX BIT(0) /* Receive end interrupt request */
--#define SPI_IRNEN_ALL 0x1F
-+#define LTQ_SPI_RX_IRQ_NAME "spi_rx"
-+#define LTQ_SPI_TX_IRQ_NAME "spi_tx"
-+#define LTQ_SPI_ERR_IRQ_NAME "spi_err"
-+#define LTQ_SPI_FRM_IRQ_NAME "spi_frm"
-+
-+#define LTQ_SPI_CLC 0x00
-+#define LTQ_SPI_PISEL 0x04
-+#define LTQ_SPI_ID 0x08
-+#define LTQ_SPI_CON 0x10
-+#define LTQ_SPI_STAT 0x14
-+#define LTQ_SPI_WHBSTATE 0x18
-+#define LTQ_SPI_TB 0x20
-+#define LTQ_SPI_RB 0x24
-+#define LTQ_SPI_RXFCON 0x30
-+#define LTQ_SPI_TXFCON 0x34
-+#define LTQ_SPI_FSTAT 0x38
-+#define LTQ_SPI_BRT 0x40
-+#define LTQ_SPI_BRSTAT 0x44
-+#define LTQ_SPI_SFCON 0x60
-+#define LTQ_SPI_SFSTAT 0x64
-+#define LTQ_SPI_GPOCON 0x70
-+#define LTQ_SPI_GPOSTAT 0x74
-+#define LTQ_SPI_FPGO 0x78
-+#define LTQ_SPI_RXREQ 0x80
-+#define LTQ_SPI_RXCNT 0x84
-+#define LTQ_SPI_DMACON 0xec
-+#define LTQ_SPI_IRNEN 0xf4
-+#define LTQ_SPI_IRNICR 0xf8
-+#define LTQ_SPI_IRNCR 0xfc
-+
-+#define LTQ_SPI_CLC_SMC_S 16 /* Clock divider for sleep mode */
-+#define LTQ_SPI_CLC_SMC_M (0xFF << LTQ_SPI_CLC_SMC_S)
-+#define LTQ_SPI_CLC_RMC_S 8 /* Clock divider for normal run mode */
-+#define LTQ_SPI_CLC_RMC_M (0xFF << LTQ_SPI_CLC_RMC_S)
-+#define LTQ_SPI_CLC_DISS BIT(1) /* Disable status bit */
-+#define LTQ_SPI_CLC_DISR BIT(0) /* Disable request bit */
-+
-+#define LTQ_SPI_ID_TXFS_S 24 /* Implemented TX FIFO size */
-+#define LTQ_SPI_ID_TXFS_M (0x3F << LTQ_SPI_ID_TXFS_S)
-+#define LTQ_SPI_ID_RXFS_S 16 /* Implemented RX FIFO size */
-+#define LTQ_SPI_ID_RXFS_M (0x3F << LTQ_SPI_ID_RXFS_S)
-+#define LTQ_SPI_ID_MOD_S 8 /* Module ID */
-+#define LTQ_SPI_ID_MOD_M (0xff << LTQ_SPI_ID_MOD_S)
-+#define LTQ_SPI_ID_CFG_S 5 /* DMA interface support */
-+#define LTQ_SPI_ID_CFG_M (1 << LTQ_SPI_ID_CFG_S)
-+#define LTQ_SPI_ID_REV_M 0x1F /* Hardware revision number */
-+
-+#define LTQ_SPI_CON_BM_S 16 /* Data width selection */
-+#define LTQ_SPI_CON_BM_M (0x1F << LTQ_SPI_CON_BM_S)
-+#define LTQ_SPI_CON_EM BIT(24) /* Echo mode */
-+#define LTQ_SPI_CON_IDLE BIT(23) /* Idle bit value */
-+#define LTQ_SPI_CON_ENBV BIT(22) /* Enable byte valid control */
-+#define LTQ_SPI_CON_RUEN BIT(12) /* Receive underflow error enable */
-+#define LTQ_SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */
-+#define LTQ_SPI_CON_AEN BIT(10) /* Abort error enable */
-+#define LTQ_SPI_CON_REN BIT(9) /* Receive overflow error enable */
-+#define LTQ_SPI_CON_TEN BIT(8) /* Transmit overflow error enable */
-+#define LTQ_SPI_CON_LB BIT(7) /* Loopback control */
-+#define LTQ_SPI_CON_PO BIT(6) /* Clock polarity control */
-+#define LTQ_SPI_CON_PH BIT(5) /* Clock phase control */
-+#define LTQ_SPI_CON_HB BIT(4) /* Heading control */
-+#define LTQ_SPI_CON_RXOFF BIT(1) /* Switch receiver off */
-+#define LTQ_SPI_CON_TXOFF BIT(0) /* Switch transmitter off */
-+
-+#define LTQ_SPI_STAT_RXBV_S 28
-+#define LTQ_SPI_STAT_RXBV_M (0x7 << LTQ_SPI_STAT_RXBV_S)
-+#define LTQ_SPI_STAT_BSY BIT(13) /* Busy flag */
-+#define LTQ_SPI_STAT_RUE BIT(12) /* Receive underflow error flag */
-+#define LTQ_SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */
-+#define LTQ_SPI_STAT_AE BIT(10) /* Abort error flag */
-+#define LTQ_SPI_STAT_RE BIT(9) /* Receive error flag */
-+#define LTQ_SPI_STAT_TE BIT(8) /* Transmit error flag */
-+#define LTQ_SPI_STAT_ME BIT(7) /* Mode error flag */
-+#define LTQ_SPI_STAT_MS BIT(1) /* Master/slave select bit */
-+#define LTQ_SPI_STAT_EN BIT(0) /* Enable bit */
-+#define LTQ_SPI_STAT_ERRORS (LTQ_SPI_STAT_ME | LTQ_SPI_STAT_TE | \
-+ LTQ_SPI_STAT_RE | LTQ_SPI_STAT_AE | \
-+ LTQ_SPI_STAT_TUE | LTQ_SPI_STAT_RUE)
-+
-+#define LTQ_SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */
-+#define LTQ_SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */
-+#define LTQ_SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */
-+#define LTQ_SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */
-+#define LTQ_SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error flag */
-+#define LTQ_SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */
-+#define LTQ_SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */
-+#define LTQ_SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */
-+#define LTQ_SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */
-+#define LTQ_SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */
-+#define LTQ_SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */
-+#define LTQ_SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */
-+#define LTQ_SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */
-+#define LTQ_SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */
-+#define LTQ_SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */
-+#define LTQ_SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */
-+#define LTQ_SPI_WHBSTATE_CLR_ERRORS (LTQ_SPI_WHBSTATE_CLRRUE | \
-+ LTQ_SPI_WHBSTATE_CLRME | \
-+ LTQ_SPI_WHBSTATE_CLRTE | \
-+ LTQ_SPI_WHBSTATE_CLRRE | \
-+ LTQ_SPI_WHBSTATE_CLRAE | \
-+ LTQ_SPI_WHBSTATE_CLRTUE)
-+
-+#define LTQ_SPI_RXFCON_RXFITL_S 8 /* FIFO interrupt trigger level */
-+#define LTQ_SPI_RXFCON_RXFITL_M (0x3F << LTQ_SPI_RXFCON_RXFITL_S)
-+#define LTQ_SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */
-+#define LTQ_SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */
-+
-+#define LTQ_SPI_TXFCON_TXFITL_S 8 /* FIFO interrupt trigger level */
-+#define LTQ_SPI_TXFCON_TXFITL_M (0x3F << LTQ_SPI_TXFCON_TXFITL_S)
-+#define LTQ_SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */
-+#define LTQ_SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */
-+
-+#define LTQ_SPI_FSTAT_RXFFL_S 0
-+#define LTQ_SPI_FSTAT_RXFFL_M (0x3f << LTQ_SPI_FSTAT_RXFFL_S)
-+#define LTQ_SPI_FSTAT_TXFFL_S 8
-+#define LTQ_SPI_FSTAT_TXFFL_M (0x3f << LTQ_SPI_FSTAT_TXFFL_S)
-+
-+#define LTQ_SPI_GPOCON_ISCSBN_S 8
-+#define LTQ_SPI_GPOCON_INVOUTN_S 0
-+
-+#define LTQ_SPI_FGPO_SETOUTN_S 8
-+#define LTQ_SPI_FGPO_CLROUTN_S 0
-+
-+#define LTQ_SPI_RXREQ_RXCNT_M 0xFFFF /* Receive count value */
-+#define LTQ_SPI_RXCNT_TODO_M 0xFFFF /* Recevie to-do value */
-+
-+#define LTQ_SPI_IRNEN_TFI BIT(4) /* TX finished interrupt */
-+#define LTQ_SPI_IRNEN_F BIT(3) /* Frame end interrupt request */
-+#define LTQ_SPI_IRNEN_E BIT(2) /* Error end interrupt request */
-+#define LTQ_SPI_IRNEN_T_XWAY BIT(1) /* Transmit end interrupt request */
-+#define LTQ_SPI_IRNEN_R_XWAY BIT(0) /* Receive end interrupt request */
-+#define LTQ_SPI_IRNEN_R_XRX BIT(1) /* Transmit end interrupt request */
-+#define LTQ_SPI_IRNEN_T_XRX BIT(0) /* Receive end interrupt request */
-+#define LTQ_SPI_IRNEN_ALL 0x1F
-
- struct lantiq_ssc_hwcfg {
- unsigned int irnen_r;
-@@ -208,16 +212,16 @@ static void lantiq_ssc_maskl(const struc
-
- static unsigned int tx_fifo_level(const struct lantiq_ssc_spi *spi)
- {
-- u32 fstat = lantiq_ssc_readl(spi, SPI_FSTAT);
-+ u32 fstat = lantiq_ssc_readl(spi, LTQ_SPI_FSTAT);
-
-- return (fstat & SPI_FSTAT_TXFFL_M) >> SPI_FSTAT_TXFFL_S;
-+ return (fstat & LTQ_SPI_FSTAT_TXFFL_M) >> LTQ_SPI_FSTAT_TXFFL_S;
- }
-
- static unsigned int rx_fifo_level(const struct lantiq_ssc_spi *spi)
- {
-- u32 fstat = lantiq_ssc_readl(spi, SPI_FSTAT);
-+ u32 fstat = lantiq_ssc_readl(spi, LTQ_SPI_FSTAT);
-
-- return fstat & SPI_FSTAT_RXFFL_M;
-+ return fstat & LTQ_SPI_FSTAT_RXFFL_M;
- }
-
- static unsigned int tx_fifo_free(const struct lantiq_ssc_spi *spi)
-@@ -227,38 +231,38 @@ static unsigned int tx_fifo_free(const s
-
- static void rx_fifo_reset(const struct lantiq_ssc_spi *spi)
- {
-- u32 val = spi->rx_fifo_size << SPI_RXFCON_RXFITL_S;
-+ u32 val = spi->rx_fifo_size << LTQ_SPI_RXFCON_RXFITL_S;
-
-- val |= SPI_RXFCON_RXFEN | SPI_RXFCON_RXFLU;
-- lantiq_ssc_writel(spi, val, SPI_RXFCON);
-+ val |= LTQ_SPI_RXFCON_RXFEN | LTQ_SPI_RXFCON_RXFLU;
-+ lantiq_ssc_writel(spi, val, LTQ_SPI_RXFCON);
- }
-
- static void tx_fifo_reset(const struct lantiq_ssc_spi *spi)
- {
-- u32 val = 1 << SPI_TXFCON_TXFITL_S;
-+ u32 val = 1 << LTQ_SPI_TXFCON_TXFITL_S;
-
-- val |= SPI_TXFCON_TXFEN | SPI_TXFCON_TXFLU;
-- lantiq_ssc_writel(spi, val, SPI_TXFCON);
-+ val |= LTQ_SPI_TXFCON_TXFEN | LTQ_SPI_TXFCON_TXFLU;
-+ lantiq_ssc_writel(spi, val, LTQ_SPI_TXFCON);
- }
-
- static void rx_fifo_flush(const struct lantiq_ssc_spi *spi)
- {
-- lantiq_ssc_maskl(spi, 0, SPI_RXFCON_RXFLU, SPI_RXFCON);
-+ lantiq_ssc_maskl(spi, 0, LTQ_SPI_RXFCON_RXFLU, LTQ_SPI_RXFCON);
- }
-
- static void tx_fifo_flush(const struct lantiq_ssc_spi *spi)
- {
-- lantiq_ssc_maskl(spi, 0, SPI_TXFCON_TXFLU, SPI_TXFCON);
-+ lantiq_ssc_maskl(spi, 0, LTQ_SPI_TXFCON_TXFLU, LTQ_SPI_TXFCON);
- }
-
- static void hw_enter_config_mode(const struct lantiq_ssc_spi *spi)
- {
-- lantiq_ssc_writel(spi, SPI_WHBSTATE_CLREN, SPI_WHBSTATE);
-+ lantiq_ssc_writel(spi, LTQ_SPI_WHBSTATE_CLREN, LTQ_SPI_WHBSTATE);
- }
-
- static void hw_enter_active_mode(const struct lantiq_ssc_spi *spi)
- {
-- lantiq_ssc_writel(spi, SPI_WHBSTATE_SETEN, SPI_WHBSTATE);
-+ lantiq_ssc_writel(spi, LTQ_SPI_WHBSTATE_SETEN, LTQ_SPI_WHBSTATE);
- }
-
- static void hw_setup_speed_hz(const struct lantiq_ssc_spi *spi,
-@@ -287,7 +291,7 @@ static void hw_setup_speed_hz(const stru
- dev_dbg(spi->dev, "spi_clk %u, max_speed_hz %u, brt %u\n",
- spi_clk, max_speed_hz, brt);
-
-- lantiq_ssc_writel(spi, brt, SPI_BRT);
-+ lantiq_ssc_writel(spi, brt, LTQ_SPI_BRT);
- }
-
- static void hw_setup_bits_per_word(const struct lantiq_ssc_spi *spi,
-@@ -296,9 +300,9 @@ static void hw_setup_bits_per_word(const
- u32 bm;
-
- /* CON.BM value = bits_per_word - 1 */
-- bm = (bits_per_word - 1) << SPI_CON_BM_S;
-+ bm = (bits_per_word - 1) << LTQ_SPI_CON_BM_S;
-
-- lantiq_ssc_maskl(spi, SPI_CON_BM_M, bm, SPI_CON);
-+ lantiq_ssc_maskl(spi, LTQ_SPI_CON_BM_M, bm, LTQ_SPI_CON);
- }
-
- static void hw_setup_clock_mode(const struct lantiq_ssc_spi *spi,
-@@ -315,28 +319,28 @@ static void hw_setup_clock_mode(const st
- * 3 1 1 1 0
- */
- if (mode & SPI_CPHA)
-- con_clr |= SPI_CON_PH;
-+ con_clr |= LTQ_SPI_CON_PH;
- else
-- con_set |= SPI_CON_PH;
-+ con_set |= LTQ_SPI_CON_PH;
-
- if (mode & SPI_CPOL)
-- con_set |= SPI_CON_PO | SPI_CON_IDLE;
-+ con_set |= LTQ_SPI_CON_PO | LTQ_SPI_CON_IDLE;
- else
-- con_clr |= SPI_CON_PO | SPI_CON_IDLE;
-+ con_clr |= LTQ_SPI_CON_PO | LTQ_SPI_CON_IDLE;
-
- /* Set heading control */
- if (mode & SPI_LSB_FIRST)
-- con_clr |= SPI_CON_HB;
-+ con_clr |= LTQ_SPI_CON_HB;
- else
-- con_set |= SPI_CON_HB;
-+ con_set |= LTQ_SPI_CON_HB;
-
- /* Set loopback mode */
- if (mode & SPI_LOOP)
-- con_set |= SPI_CON_LB;
-+ con_set |= LTQ_SPI_CON_LB;
- else
-- con_clr |= SPI_CON_LB;
-+ con_clr |= LTQ_SPI_CON_LB;
-
-- lantiq_ssc_maskl(spi, con_clr, con_set, SPI_CON);
-+ lantiq_ssc_maskl(spi, con_clr, con_set, LTQ_SPI_CON);
- }
-
- static void lantiq_ssc_hw_init(const struct lantiq_ssc_spi *spi)
-@@ -347,37 +351,39 @@ static void lantiq_ssc_hw_init(const str
- * Set clock divider for run mode to 1 to
- * run at same frequency as FPI bus
- */
-- lantiq_ssc_writel(spi, 1 << SPI_CLC_RMC_S, SPI_CLC);
-+ lantiq_ssc_writel(spi, 1 << LTQ_SPI_CLC_RMC_S, LTQ_SPI_CLC);
-
- /* Put controller into config mode */
- hw_enter_config_mode(spi);
-
- /* Clear error flags */
-- lantiq_ssc_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE);
-+ lantiq_ssc_maskl(spi, 0, LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE);
-
- /* Enable error checking, disable TX/RX */
-- lantiq_ssc_writel(spi, SPI_CON_RUEN | SPI_CON_AEN | SPI_CON_TEN |
-- SPI_CON_REN | SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON);
-+ lantiq_ssc_writel(spi, LTQ_SPI_CON_RUEN | LTQ_SPI_CON_AEN |
-+ LTQ_SPI_CON_TEN | LTQ_SPI_CON_REN | LTQ_SPI_CON_TXOFF |
-+ LTQ_SPI_CON_RXOFF, LTQ_SPI_CON);
-
- /* Setup default SPI mode */
- hw_setup_bits_per_word(spi, spi->bits_per_word);
- hw_setup_clock_mode(spi, SPI_MODE_0);
-
- /* Enable master mode and clear error flags */
-- lantiq_ssc_writel(spi, SPI_WHBSTATE_SETMS | SPI_WHBSTATE_CLR_ERRORS,
-- SPI_WHBSTATE);
-+ lantiq_ssc_writel(spi, LTQ_SPI_WHBSTATE_SETMS |
-+ LTQ_SPI_WHBSTATE_CLR_ERRORS,
-+ LTQ_SPI_WHBSTATE);
-
- /* Reset GPIO/CS registers */
-- lantiq_ssc_writel(spi, 0, SPI_GPOCON);
-- lantiq_ssc_writel(spi, 0xFF00, SPI_FPGO);
-+ lantiq_ssc_writel(spi, 0, LTQ_SPI_GPOCON);
-+ lantiq_ssc_writel(spi, 0xFF00, LTQ_SPI_FPGO);
-
- /* Enable and flush FIFOs */
- rx_fifo_reset(spi);
- tx_fifo_reset(spi);
-
- /* Enable interrupts */
-- lantiq_ssc_writel(spi, hwcfg->irnen_t | hwcfg->irnen_r | SPI_IRNEN_E,
-- SPI_IRNEN);
-+ lantiq_ssc_writel(spi, hwcfg->irnen_t | hwcfg->irnen_r |
-+ LTQ_SPI_IRNEN_E, LTQ_SPI_IRNEN);
- }
-
- static int lantiq_ssc_setup(struct spi_device *spidev)
-@@ -400,13 +406,13 @@ static int lantiq_ssc_setup(struct spi_d
- }
-
- /* set GPO pin to CS mode */
-- gpocon = 1 << ((cs - spi->base_cs) + SPI_GPOCON_ISCSBN_S);
-+ gpocon = 1 << ((cs - spi->base_cs) + LTQ_SPI_GPOCON_ISCSBN_S);
-
- /* invert GPO pin */
- if (spidev->mode & SPI_CS_HIGH)
- gpocon |= 1 << (cs - spi->base_cs);
-
-- lantiq_ssc_maskl(spi, 0, gpocon, SPI_GPOCON);
-+ lantiq_ssc_maskl(spi, 0, gpocon, LTQ_SPI_GPOCON);
-
- return 0;
- }
-@@ -442,18 +448,18 @@ static void hw_setup_transfer(struct lan
- }
-
- /* Configure transmitter and receiver */
-- con = lantiq_ssc_readl(spi, SPI_CON);
-+ con = lantiq_ssc_readl(spi, LTQ_SPI_CON);
- if (t->tx_buf)
-- con &= ~SPI_CON_TXOFF;
-+ con &= ~LTQ_SPI_CON_TXOFF;
- else
-- con |= SPI_CON_TXOFF;
-+ con |= LTQ_SPI_CON_TXOFF;
-
- if (t->rx_buf)
-- con &= ~SPI_CON_RXOFF;
-+ con &= ~LTQ_SPI_CON_RXOFF;
- else
-- con |= SPI_CON_RXOFF;
-+ con |= LTQ_SPI_CON_RXOFF;
-
-- lantiq_ssc_writel(spi, con, SPI_CON);
-+ lantiq_ssc_writel(spi, con, LTQ_SPI_CON);
- }
-
- static int lantiq_ssc_unprepare_message(struct spi_master *master,
-@@ -464,7 +470,8 @@ static int lantiq_ssc_unprepare_message(
- flush_workqueue(spi->wq);
-
- /* Disable transmitter and receiver while idle */
-- lantiq_ssc_maskl(spi, 0, SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON);
-+ lantiq_ssc_maskl(spi, 0, LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF,
-+ LTQ_SPI_CON);
-
- return 0;
- }
-@@ -503,7 +510,7 @@ static void tx_fifo_write(struct lantiq_
- break;
- }
-
-- lantiq_ssc_writel(spi, data, SPI_TB);
-+ lantiq_ssc_writel(spi, data, LTQ_SPI_TB);
- tx_free--;
- }
- }
-@@ -517,7 +524,7 @@ static void rx_fifo_read_full_duplex(str
- unsigned int rx_fill = rx_fifo_level(spi);
-
- while (rx_fill) {
-- data = lantiq_ssc_readl(spi, SPI_RB);
-+ data = lantiq_ssc_readl(spi, LTQ_SPI_RB);
-
- switch (spi->bits_per_word) {
- case 2 ... 8:
-@@ -563,9 +570,9 @@ static void rx_fifo_read_half_duplex(str
- */
- while (rx_fill) {
- if (spi->rx_todo < 4) {
-- rxbv = (lantiq_ssc_readl(spi, SPI_STAT) &
-- SPI_STAT_RXBV_M) >> SPI_STAT_RXBV_S;
-- data = lantiq_ssc_readl(spi, SPI_RB);
-+ rxbv = (lantiq_ssc_readl(spi, LTQ_SPI_STAT) &
-+ LTQ_SPI_STAT_RXBV_M) >> LTQ_SPI_STAT_RXBV_S;
-+ data = lantiq_ssc_readl(spi, LTQ_SPI_RB);
-
- shift = (rxbv - 1) * 8;
- rx8 = spi->rx;
-@@ -578,7 +585,7 @@ static void rx_fifo_read_half_duplex(str
- spi->rx++;
- }
- } else {
-- data = lantiq_ssc_readl(spi, SPI_RB);
-+ data = lantiq_ssc_readl(spi, LTQ_SPI_RB);
- rx32 = (u32 *) spi->rx;
-
- *rx32++ = data;
-@@ -603,7 +610,7 @@ static void rx_request(struct lantiq_ssc
- if (rxreq > rxreq_max)
- rxreq = rxreq_max;
-
-- lantiq_ssc_writel(spi, rxreq, SPI_RXREQ);
-+ lantiq_ssc_writel(spi, rxreq, LTQ_SPI_RXREQ);
- }
-
- static irqreturn_t lantiq_ssc_xmit_interrupt(int irq, void *data)
-@@ -642,26 +649,26 @@ completed:
- static irqreturn_t lantiq_ssc_err_interrupt(int irq, void *data)
- {
- struct lantiq_ssc_spi *spi = data;
-- u32 stat = lantiq_ssc_readl(spi, SPI_STAT);
-+ u32 stat = lantiq_ssc_readl(spi, LTQ_SPI_STAT);
-
-- if (!(stat & SPI_STAT_ERRORS))
-+ if (!(stat & LTQ_SPI_STAT_ERRORS))
- return IRQ_NONE;
-
-- if (stat & SPI_STAT_RUE)
-+ if (stat & LTQ_SPI_STAT_RUE)
- dev_err(spi->dev, "receive underflow error\n");
-- if (stat & SPI_STAT_TUE)
-+ if (stat & LTQ_SPI_STAT_TUE)
- dev_err(spi->dev, "transmit underflow error\n");
-- if (stat & SPI_STAT_AE)
-+ if (stat & LTQ_SPI_STAT_AE)
- dev_err(spi->dev, "abort error\n");
-- if (stat & SPI_STAT_RE)
-+ if (stat & LTQ_SPI_STAT_RE)
- dev_err(spi->dev, "receive overflow error\n");
-- if (stat & SPI_STAT_TE)
-+ if (stat & LTQ_SPI_STAT_TE)
- dev_err(spi->dev, "transmit overflow error\n");
-- if (stat & SPI_STAT_ME)
-+ if (stat & LTQ_SPI_STAT_ME)
- dev_err(spi->dev, "mode error\n");
-
- /* Clear error flags */
-- lantiq_ssc_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE);
-+ lantiq_ssc_maskl(spi, 0, LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE);
-
- /* set bad status so it can be retried */
- if (spi->master->cur_msg)
-@@ -721,9 +728,9 @@ static void lantiq_ssc_bussy_work(struct
-
- end = jiffies + msecs_to_jiffies(timeout);
- do {
-- u32 stat = lantiq_ssc_readl(spi, SPI_STAT);
-+ u32 stat = lantiq_ssc_readl(spi, LTQ_SPI_STAT);
-
-- if (!(stat & SPI_STAT_BSY)) {
-+ if (!(stat & LTQ_SPI_STAT_BSY)) {
- spi_finalize_current_transfer(spi->master);
- return;
- }
-@@ -755,9 +762,9 @@ static void lantiq_ssc_set_cs(struct spi
- if (!!(spidev->mode & SPI_CS_HIGH) == enable)
- fgpo = (1 << (cs - spi->base_cs));
- else
-- fgpo = (1 << (cs - spi->base_cs + SPI_FGPO_SETOUTN_S));
-+ fgpo = (1 << (cs - spi->base_cs + LTQ_SPI_FGPO_SETOUTN_S));
-
-- lantiq_ssc_writel(spi, fgpo, SPI_FPGO);
-+ lantiq_ssc_writel(spi, fgpo, LTQ_SPI_FPGO);
- }
-
- static int lantiq_ssc_transfer_one(struct spi_master *master,
-@@ -772,13 +779,13 @@ static int lantiq_ssc_transfer_one(struc
- }
-
- static const struct lantiq_ssc_hwcfg lantiq_ssc_xway = {
-- .irnen_r = SPI_IRNEN_R_XWAY,
-- .irnen_t = SPI_IRNEN_T_XWAY,
-+ .irnen_r = LTQ_SPI_IRNEN_R_XWAY,
-+ .irnen_t = LTQ_SPI_IRNEN_T_XWAY,
- };
-
- static const struct lantiq_ssc_hwcfg lantiq_ssc_xrx = {
-- .irnen_r = SPI_IRNEN_R_XRX,
-- .irnen_t = SPI_IRNEN_T_XRX,
-+ .irnen_r = LTQ_SPI_IRNEN_R_XRX,
-+ .irnen_t = LTQ_SPI_IRNEN_T_XRX,
- };
-
- static const struct of_device_id lantiq_ssc_match[] = {
-@@ -814,21 +821,21 @@ static int lantiq_ssc_probe(struct platf
- return -ENXIO;
- }
-
-- rx_irq = platform_get_irq_byname(pdev, SPI_RX_IRQ_NAME);
-+ rx_irq = platform_get_irq_byname(pdev, LTQ_SPI_RX_IRQ_NAME);
- if (rx_irq < 0) {
-- dev_err(dev, "failed to get %s\n", SPI_RX_IRQ_NAME);
-+ dev_err(dev, "failed to get %s\n", LTQ_SPI_RX_IRQ_NAME);
- return -ENXIO;
- }
-
-- tx_irq = platform_get_irq_byname(pdev, SPI_TX_IRQ_NAME);
-+ tx_irq = platform_get_irq_byname(pdev, LTQ_SPI_TX_IRQ_NAME);
- if (tx_irq < 0) {
-- dev_err(dev, "failed to get %s\n", SPI_TX_IRQ_NAME);
-+ dev_err(dev, "failed to get %s\n", LTQ_SPI_TX_IRQ_NAME);
- return -ENXIO;
- }
-
-- err_irq = platform_get_irq_byname(pdev, SPI_ERR_IRQ_NAME);
-+ err_irq = platform_get_irq_byname(pdev, LTQ_SPI_ERR_IRQ_NAME);
- if (err_irq < 0) {
-- dev_err(dev, "failed to get %s\n", SPI_ERR_IRQ_NAME);
-+ dev_err(dev, "failed to get %s\n", LTQ_SPI_ERR_IRQ_NAME);
- return -ENXIO;
- }
-
-@@ -849,17 +856,17 @@ static int lantiq_ssc_probe(struct platf
- }
-
- err = devm_request_irq(dev, rx_irq, lantiq_ssc_xmit_interrupt,
-- 0, SPI_RX_IRQ_NAME, spi);
-+ 0, LTQ_SPI_RX_IRQ_NAME, spi);
- if (err)
- goto err_master_put;
-
- err = devm_request_irq(dev, tx_irq, lantiq_ssc_xmit_interrupt,
-- 0, SPI_TX_IRQ_NAME, spi);
-+ 0, LTQ_SPI_TX_IRQ_NAME, spi);
- if (err)
- goto err_master_put;
-
- err = devm_request_irq(dev, err_irq, lantiq_ssc_err_interrupt,
-- 0, SPI_ERR_IRQ_NAME, spi);
-+ 0, LTQ_SPI_ERR_IRQ_NAME, spi);
- if (err)
- goto err_master_put;
-
-@@ -916,11 +923,11 @@ static int lantiq_ssc_probe(struct platf
- }
- INIT_WORK(&spi->work, lantiq_ssc_bussy_work);
-
-- id = lantiq_ssc_readl(spi, SPI_ID);
-- spi->tx_fifo_size = (id & SPI_ID_TXFS_M) >> SPI_ID_TXFS_S;
-- spi->rx_fifo_size = (id & SPI_ID_RXFS_M) >> SPI_ID_RXFS_S;
-- supports_dma = (id & SPI_ID_CFG_M) >> SPI_ID_CFG_S;
-- revision = id & SPI_ID_REV_M;
-+ id = lantiq_ssc_readl(spi, LTQ_SPI_ID);
-+ spi->tx_fifo_size = (id & LTQ_SPI_ID_TXFS_M) >> LTQ_SPI_ID_TXFS_S;
-+ spi->rx_fifo_size = (id & LTQ_SPI_ID_RXFS_M) >> LTQ_SPI_ID_RXFS_S;
-+ supports_dma = (id & LTQ_SPI_ID_CFG_M) >> LTQ_SPI_ID_CFG_S;
-+ revision = id & LTQ_SPI_ID_REV_M;
-
- lantiq_ssc_hw_init(spi);
-
-@@ -952,8 +959,8 @@ static int lantiq_ssc_remove(struct plat
- {
- struct lantiq_ssc_spi *spi = platform_get_drvdata(pdev);
-
-- lantiq_ssc_writel(spi, 0, SPI_IRNEN);
-- lantiq_ssc_writel(spi, 0, SPI_CLC);
-+ lantiq_ssc_writel(spi, 0, LTQ_SPI_IRNEN);
-+ lantiq_ssc_writel(spi, 0, LTQ_SPI_CLC);
- rx_fifo_flush(spi);
- tx_fifo_flush(spi);
- hw_enter_config_mode(spi);
diff --git a/target/linux/lantiq/patches-4.14/0152-lantiq-VPE.patch b/target/linux/lantiq/patches-4.14/0152-lantiq-VPE.patch
index 7b14d9e..c0639e1 100644
--- a/target/linux/lantiq/patches-4.14/0152-lantiq-VPE.patch
+++ b/target/linux/lantiq/patches-4.14/0152-lantiq-VPE.patch
@@ -1,6 +1,6 @@
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
-@@ -2320,6 +2320,12 @@ config MIPS_VPE_LOADER
+@@ -2323,6 +2323,12 @@ config MIPS_VPE_LOADER
Includes a loader for loading an elf relocatable object
onto another VPE and running it.
@@ -142,7 +142,7 @@
{
--- a/arch/mips/lantiq/prom.c
+++ b/arch/mips/lantiq/prom.c
-@@ -31,10 +31,14 @@ EXPORT_SYMBOL_GPL(ebu_lock);
+@@ -37,10 +37,14 @@ unsigned long physical_memsize = 0L;
*/
static struct ltq_soc_info soc_info;
@@ -159,7 +159,7 @@
{
--- a/arch/mips/include/asm/mipsmtregs.h
+++ b/arch/mips/include/asm/mipsmtregs.h
-@@ -31,6 +31,9 @@
+@@ -32,6 +32,9 @@
#define read_c0_vpeconf1() __read_32bit_c0_register($1, 3)
#define write_c0_vpeconf1(val) __write_32bit_c0_register($1, 3, val)
@@ -169,7 +169,7 @@
#define read_c0_tcstatus() __read_32bit_c0_register($2, 1)
#define write_c0_tcstatus(val) __write_32bit_c0_register($2, 1, val)
-@@ -376,6 +379,8 @@ do { \
+@@ -377,6 +380,8 @@ do { \
#define write_vpe_c0_vpeconf0(val) mttc0(1, 2, val)
#define read_vpe_c0_vpeconf1() mftc0(1, 3)
#define write_vpe_c0_vpeconf1(val) mttc0(1, 3, val)
diff --git a/target/linux/lantiq/patches-4.14/0160-owrt-lantiq-multiple-flash.patch b/target/linux/lantiq/patches-4.14/0160-owrt-lantiq-multiple-flash.patch
index fd8b7b8..304ff4b 100644
--- a/target/linux/lantiq/patches-4.14/0160-owrt-lantiq-multiple-flash.patch
+++ b/target/linux/lantiq/patches-4.14/0160-owrt-lantiq-multiple-flash.patch
@@ -71,9 +71,9 @@
+ };
+ const char **type;
- if (of_machine_is_compatible("lantiq,falcon") &&
- (ltq_boot_select() != BS_FLASH)) {
-@@ -126,75 +162,89 @@ ltq_mtd_probe(struct platform_device *pd
+ ltq_mtd = devm_kzalloc(&pdev->dev, sizeof(struct ltq_mtd), GFP_KERNEL);
+ if (!ltq_mtd)
+@@ -120,75 +156,89 @@ ltq_mtd_probe(struct platform_device *pd
platform_set_drvdata(pdev, ltq_mtd);
@@ -141,17 +141,7 @@
- GFP_KERNEL);
- if (!ltq_mtd->map)
- return -ENOMEM;
-+ if (devices_found == 1) {
-+ ltq_mtd->cmtd = ltq_mtd->mtd[0];
-+ } else if (devices_found > 1) {
-+ /*
-+ * We detected multiple devices. Concatenate them together.
-+ */
-+ ltq_mtd->cmtd = mtd_concat_create(ltq_mtd->mtd, devices_found, dev_name(&pdev->dev));
-+ if (ltq_mtd->cmtd == NULL)
-+ err = -ENXIO;
-+ }
-
+-
- if (of_find_property(pdev->dev.of_node, "lantiq,noxip", NULL))
- ltq_mtd->map->phys = NO_XIP;
- else
@@ -176,8 +166,17 @@
- if (!ltq_mtd->mtd) {
- dev_err(&pdev->dev, "probing failed\n");
- return -ENXIO;
-- }
--
++ if (devices_found == 1) {
++ ltq_mtd->cmtd = ltq_mtd->mtd[0];
++ } else if (devices_found > 1) {
++ /*
++ * We detected multiple devices. Concatenate them together.
++ */
++ ltq_mtd->cmtd = mtd_concat_create(ltq_mtd->mtd, devices_found, dev_name(&pdev->dev));
++ if (ltq_mtd->cmtd == NULL)
++ err = -ENXIO;
+ }
+
- ltq_mtd->mtd->dev.parent = &pdev->dev;
- mtd_set_of_node(ltq_mtd->mtd, pdev->dev.of_node);
-
diff --git a/target/linux/lantiq/patches-4.14/0170-MIPS-lantiq-lock-DMA-register-accesses-for-SMP.patch b/target/linux/lantiq/patches-4.14/0170-MIPS-lantiq-lock-DMA-register-accesses-for-SMP.patch
deleted file mode 100644
index 234a252..0000000
--- a/target/linux/lantiq/patches-4.14/0170-MIPS-lantiq-lock-DMA-register-accesses-for-SMP.patch
+++ /dev/null
@@ -1,152 +0,0 @@
-From 58078a30038b578c26c532545448fe3746648390 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke at hauke-m.de>
-Date: Thu, 29 Dec 2016 21:02:57 +0100
-Subject: [PATCH] MIPS: lantiq: lock DMA register accesses for SMP
-
-The DMA controller channel and port configuration is changed by
-selecting the port or channel in one register and then update the
-configuration in other registers. This has to be done in an atomic
-operation. Previously only the local interrupts were deactivated which
-works for single CPU systems. If the system supports SMP a better
-locking is needed, use spinlocks instead.
-On more recent SoCs (at least xrx200 and later) there are two memory
-regions to change the configuration, there we could use one area for
-each CPU and do not have to synchronize between the CPUs and more.
-
-Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
----
- arch/mips/lantiq/xway/dma.c | 38 ++++++++++++++++++++------------------
- 1 file changed, 20 insertions(+), 18 deletions(-)
-
---- a/arch/mips/lantiq/xway/dma.c
-+++ b/arch/mips/lantiq/xway/dma.c
-@@ -20,6 +20,7 @@
- #include <linux/io.h>
- #include <linux/dma-mapping.h>
- #include <linux/module.h>
-+#include <linux/spinlock.h>
- #include <linux/clk.h>
- #include <linux/err.h>
-
-@@ -59,16 +60,17 @@
- ltq_dma_membase + (z))
-
- static void __iomem *ltq_dma_membase;
-+static DEFINE_SPINLOCK(ltq_dma_lock);
-
- void
- ltq_dma_enable_irq(struct ltq_dma_channel *ch)
- {
- unsigned long flags;
-
-- local_irq_save(flags);
-+ spin_lock_irqsave(<q_dma_lock, flags);
- ltq_dma_w32(ch->nr, LTQ_DMA_CS);
- ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN);
-- local_irq_restore(flags);
-+ spin_unlock_irqrestore(<q_dma_lock, flags);
- }
- EXPORT_SYMBOL_GPL(ltq_dma_enable_irq);
-
-@@ -77,10 +79,10 @@ ltq_dma_disable_irq(struct ltq_dma_chann
- {
- unsigned long flags;
-
-- local_irq_save(flags);
-+ spin_lock_irqsave(<q_dma_lock, flags);
- ltq_dma_w32(ch->nr, LTQ_DMA_CS);
- ltq_dma_w32_mask(1 << ch->nr, 0, LTQ_DMA_IRNEN);
-- local_irq_restore(flags);
-+ spin_unlock_irqrestore(<q_dma_lock, flags);
- }
- EXPORT_SYMBOL_GPL(ltq_dma_disable_irq);
-
-@@ -89,10 +91,10 @@ ltq_dma_ack_irq(struct ltq_dma_channel *
- {
- unsigned long flags;
-
-- local_irq_save(flags);
-+ spin_lock_irqsave(<q_dma_lock, flags);
- ltq_dma_w32(ch->nr, LTQ_DMA_CS);
- ltq_dma_w32(DMA_IRQ_ACK, LTQ_DMA_CIS);
-- local_irq_restore(flags);
-+ spin_unlock_irqrestore(<q_dma_lock, flags);
- }
- EXPORT_SYMBOL_GPL(ltq_dma_ack_irq);
-
-@@ -101,11 +103,11 @@ ltq_dma_open(struct ltq_dma_channel *ch)
- {
- unsigned long flag;
-
-- local_irq_save(flag);
-+ spin_lock_irqsave(<q_dma_lock, flag);
- ltq_dma_w32(ch->nr, LTQ_DMA_CS);
- ltq_dma_w32_mask(0, DMA_CHAN_ON, LTQ_DMA_CCTRL);
-- ltq_dma_enable_irq(ch);
-- local_irq_restore(flag);
-+ ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN);
-+ spin_unlock_irqrestore(<q_dma_lock, flag);
- }
- EXPORT_SYMBOL_GPL(ltq_dma_open);
-
-@@ -114,11 +116,11 @@ ltq_dma_close(struct ltq_dma_channel *ch
- {
- unsigned long flag;
-
-- local_irq_save(flag);
-+ spin_lock_irqsave(<q_dma_lock, flag);
- ltq_dma_w32(ch->nr, LTQ_DMA_CS);
- ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL);
-- ltq_dma_disable_irq(ch);
-- local_irq_restore(flag);
-+ ltq_dma_w32_mask(1 << ch->nr, 0, LTQ_DMA_IRNEN);
-+ spin_unlock_irqrestore(<q_dma_lock, flag);
- }
- EXPORT_SYMBOL_GPL(ltq_dma_close);
-
-@@ -133,7 +135,7 @@ ltq_dma_alloc(struct ltq_dma_channel *ch
- &ch->phys, GFP_ATOMIC);
- memset(ch->desc_base, 0, LTQ_DESC_NUM * LTQ_DESC_SIZE);
-
-- local_irq_save(flags);
-+ spin_lock_irqsave(<q_dma_lock, flags);
- ltq_dma_w32(ch->nr, LTQ_DMA_CS);
- ltq_dma_w32(ch->phys, LTQ_DMA_CDBA);
- ltq_dma_w32(LTQ_DESC_NUM, LTQ_DMA_CDLEN);
-@@ -142,7 +144,7 @@ ltq_dma_alloc(struct ltq_dma_channel *ch
- ltq_dma_w32_mask(0, DMA_CHAN_RST, LTQ_DMA_CCTRL);
- while (ltq_dma_r32(LTQ_DMA_CCTRL) & DMA_CHAN_RST)
- ;
-- local_irq_restore(flags);
-+ spin_unlock_irqrestore(<q_dma_lock, flags);
- }
-
- void
-@@ -152,11 +154,11 @@ ltq_dma_alloc_tx(struct ltq_dma_channel
-
- ltq_dma_alloc(ch);
-
-- local_irq_save(flags);
-+ spin_lock_irqsave(<q_dma_lock, flags);
- ltq_dma_w32(DMA_DESCPT, LTQ_DMA_CIE);
- ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN);
- ltq_dma_w32(DMA_WEIGHT | DMA_TX, LTQ_DMA_CCTRL);
-- local_irq_restore(flags);
-+ spin_unlock_irqrestore(<q_dma_lock, flags);
- }
- EXPORT_SYMBOL_GPL(ltq_dma_alloc_tx);
-
-@@ -167,11 +169,11 @@ ltq_dma_alloc_rx(struct ltq_dma_channel
-
- ltq_dma_alloc(ch);
-
-- local_irq_save(flags);
-+ spin_lock_irqsave(<q_dma_lock, flags);
- ltq_dma_w32(DMA_DESCPT, LTQ_DMA_CIE);
- ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN);
- ltq_dma_w32(DMA_WEIGHT, LTQ_DMA_CCTRL);
-- local_irq_restore(flags);
-+ spin_unlock_irqrestore(<q_dma_lock, flags);
- }
- EXPORT_SYMBOL_GPL(ltq_dma_alloc_rx);
-
diff --git a/target/linux/lantiq/patches-4.14/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch b/target/linux/lantiq/patches-4.14/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch
index e42aaf9..ae8efcf 100644
--- a/target/linux/lantiq/patches-4.14/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch
+++ b/target/linux/lantiq/patches-4.14/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch
@@ -1,6 +1,6 @@
--- a/arch/mips/lantiq/xway/sysctrl.c
+++ b/arch/mips/lantiq/xway/sysctrl.c
-@@ -442,6 +442,20 @@ static void clkdev_add_clkout(void)
+@@ -424,6 +424,20 @@ static void clkdev_add_clkout(void)
}
}
@@ -21,9 +21,9 @@
/* bring up all register ranges that we need for basic system control */
void __init ltq_soc_init(void)
{
-@@ -628,4 +642,6 @@ void __init ltq_soc_init(void)
- if (of_machine_is_compatible("lantiq,vr9"))
- xbar_fpi_burst_disable();
+@@ -589,4 +603,6 @@ void __init ltq_soc_init(void)
+ clkdev_add_pmu("1e100400.serial", NULL, 1, 0, PMU_ASC0);
+ }
usb_set_clock();
+
+ set_phy_clock_source(np_cgu);
diff --git a/target/linux/lantiq/patches-4.14/0302-xrx200-add-sensors-driver.patch b/target/linux/lantiq/patches-4.14/0302-xrx200-add-sensors-driver.patch
deleted file mode 100644
index 7e0051e..0000000
--- a/target/linux/lantiq/patches-4.14/0302-xrx200-add-sensors-driver.patch
+++ /dev/null
@@ -1,184 +0,0 @@
---- a/drivers/hwmon/Makefile
-+++ b/drivers/hwmon/Makefile
-@@ -109,6 +109,7 @@ obj-$(CONFIG_SENSORS_LTC4222) += ltc4222
- obj-$(CONFIG_SENSORS_LTC4245) += ltc4245.o
- obj-$(CONFIG_SENSORS_LTC4260) += ltc4260.o
- obj-$(CONFIG_SENSORS_LTC4261) += ltc4261.o
-+obj-$(CONFIG_SENSORS_LTQ_CPUTEMP) += ltq-cputemp.o
- obj-$(CONFIG_SENSORS_MAX1111) += max1111.o
- obj-$(CONFIG_SENSORS_MAX16065) += max16065.o
- obj-$(CONFIG_SENSORS_MAX1619) += max1619.o
---- a/drivers/hwmon/Kconfig
-+++ b/drivers/hwmon/Kconfig
-@@ -780,6 +780,14 @@ config SENSORS_LTC4261
- This driver can also be built as a module. If so, the module will
- be called ltc4261.
-
-+config SENSORS_LTQ_CPUTEMP
-+ bool "Lantiq CPU temperature sensor"
-+ depends on LANTIQ
-+ default n
-+ help
-+ If you say yes here you get support for the temperature
-+ sensor inside your CPU.
-+
- config SENSORS_MAX1111
- tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles"
- depends on SPI_MASTER
---- /dev/null
-+++ b/drivers/hwmon/ltq-cputemp.c
-@@ -0,0 +1,154 @@
-+/* Lantiq CPU Temperatur sensor driver for xrx200
-+ *
-+ * Copyright (C) 2016 Florian Eckert <feckert at tdt.de>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version
-+ *
-+ * This program is distributed in the hope that it will be useful
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, see <http://www.gnu.org/licenses/>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/of_device.h>
-+#include <linux/hwmon.h>
-+#include <linux/hwmon-sysfs.h>
-+
-+#include <lantiq_soc.h>
-+
-+/* gphy1 configuration register contains cpu temperature */
-+#define CGU_GPHY1_CR 0x0040
-+#define CGU_TEMP_PD BIT(19)
-+
-+static void ltq_cputemp_enable(void)
-+{
-+ ltq_cgu_w32(ltq_cgu_r32(CGU_GPHY1_CR) | CGU_TEMP_PD, CGU_GPHY1_CR);
-+
-+ /* wait a short moment to let the SoC get the first temperatur value */
-+ mdelay(100);
-+}
-+
-+static void ltq_cputemp_disable(void)
-+{
-+ ltq_cgu_w32(ltq_cgu_r32(CGU_GPHY1_CR) & ~CGU_TEMP_PD, CGU_GPHY1_CR);
-+}
-+
-+static int ltq_cputemp_read(void)
-+{
-+ int value;
-+
-+ /* get the temperature including one decimal place */
-+ value = (ltq_cgu_r32(CGU_GPHY1_CR) >> 9) & 0x01FF;
-+ value = (value << 2 ) + value;
-+
-+ /* range -38 to +154 °C, register value zero is -38.0 °C */
-+ value -= 380;
-+
-+ return value;
-+}
-+
-+static ssize_t show_cputemp(struct device *dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ int value;
-+
-+ value = ltq_cputemp_read();
-+ /* scale temp to millidegree */
-+ value = value * 100;
-+
-+ return sprintf(buf, "%d\n", value);
-+}
-+
-+static DEVICE_ATTR(temp1_input, S_IRUGO, show_cputemp, NULL);
-+
-+static struct attribute *ltq_cputemp_attrs[] = {
-+ &dev_attr_temp1_input.attr,
-+ NULL
-+};
-+
-+ATTRIBUTE_GROUPS(ltq_cputemp);
-+
-+static int ltq_cputemp_probe(struct platform_device *pdev)
-+{
-+ int value = 0;
-+ int ret;
-+ struct device *hwmon_dev;
-+
-+ /* available on vr9 v1.2 SoCs only */
-+ if (ltq_soc_type() != SOC_TYPE_VR9_2)
-+ return -ENODEV;
-+
-+ hwmon_dev = devm_hwmon_device_register_with_groups(&pdev->dev,
-+ "CPU0",
-+ NULL,
-+ ltq_cputemp_groups);
-+
-+ if (IS_ERR(hwmon_dev)) {
-+ dev_err(&pdev->dev, "Failed to register as hwmon device");
-+ ret = PTR_ERR(hwmon_dev);
-+ goto error_hwmon;
-+ }
-+
-+ ltq_cputemp_enable();
-+ value = ltq_cputemp_read();
-+ dev_info(&pdev->dev, "Current CPU die temperature: %d.%d °C", value / 10, value % 10);
-+
-+ return 0;
-+
-+error_hwmon:
-+ return ret;
-+}
-+
-+static int ltq_cputemp_release(struct platform_device *pdev)
-+{
-+ hwmon_device_unregister(&pdev->dev);
-+ ltq_cputemp_disable();
-+ return 0;
-+}
-+
-+const struct of_device_id ltq_cputemp_match[] = {
-+ { .compatible = "lantiq,cputemp" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, ltq_cputemp_match);
-+
-+static struct platform_driver ltq_cputemp_driver = {
-+ .probe = ltq_cputemp_probe,
-+ .remove = ltq_cputemp_release,
-+ .driver = {
-+ .name = "ltq-cputemp",
-+ .owner = THIS_MODULE,
-+ .of_match_table = ltq_cputemp_match,
-+ },
-+};
-+
-+int __init init_ltq_cputemp(void)
-+{
-+ int ret;
-+
-+ ret = platform_driver_register(<q_cputemp_driver);
-+ return ret;
-+}
-+
-+void clean_ltq_cputemp(void)
-+{
-+ platform_driver_unregister(<q_cputemp_driver);
-+ return;
-+}
-+
-+module_init(init_ltq_cputemp);
-+module_exit(clean_ltq_cputemp);
-+
-+MODULE_AUTHOR("Florian Eckert <feckert at tdt.de>");
-+
-+MODULE_DESCRIPTION("Lantiq Temperature Sensor");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/lantiq/xrx200/config-4.14 b/target/linux/lantiq/xrx200/config-4.14
index 73ccaf3..7b15d42 100644
--- a/target/linux/lantiq/xrx200/config-4.14
+++ b/target/linux/lantiq/xrx200/config-4.14
@@ -6,6 +6,7 @@ CONFIG_CPU_MIPSR2_IRQ_EI=y
CONFIG_CPU_MIPSR2_IRQ_VI=y
CONFIG_CPU_RMAP=y
CONFIG_CRC16=y
+CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_DEFLATE=y
@@ -13,6 +14,8 @@ CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_NULL2=y
+CONFIG_EXTRA_FIRMWARE="lantiq/xrx200_phy11g_a14.bin lantiq/xrx200_phy11g_a22.bin lantiq/xrx200_phy22f_a14.bin lantiq/xrx200_phy22f_a22.bin"
+CONFIG_EXTRA_FIRMWARE_DIR="firmware"
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_HWMON=y
CONFIG_ICPLUS_PHY=y
@@ -57,10 +60,14 @@ CONFIG_PCI=y
CONFIG_PCIE_LANTIQ=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_LANTIQ=y
-CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_SUPPLY=y
+CONFIG_QUEUED_RWLOCKS=y
+CONFIG_QUEUED_SPINLOCKS=y
+CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_STALL_COMMON=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_RFS_ACCEL=y
CONFIG_RPS=y
CONFIG_RTL8306_PHY=y
@@ -75,6 +82,7 @@ CONFIG_SYNC_R4K=y
CONFIG_SYS_SUPPORTS_SCHED_SMT=y
CONFIG_SYS_SUPPORTS_SMP=y
CONFIG_TREE_RCU=y
+CONFIG_TREE_SRCU=y
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
@@ -83,7 +91,6 @@ CONFIG_USB=y
CONFIG_USB_COMMON=y
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
CONFIG_XPS=y
CONFIG_XRX200_PHY_FW=y
CONFIG_ZLIB_DEFLATE=y
diff --git a/target/linux/lantiq/xway/config-4.14 b/target/linux/lantiq/xway/config-4.14
index 79064cc..5e18a4d 100644
--- a/target/linux/lantiq/xway/config-4.14
+++ b/target/linux/lantiq/xway/config-4.14
@@ -2,6 +2,7 @@ CONFIG_ADM6996_PHY=y
CONFIG_AR8216_PHY=y
CONFIG_BLK_MQ_PCI=y
CONFIG_CRC16=y
+CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_FIRMWARE_IN_KERNEL=y
@@ -31,6 +32,8 @@ CONFIG_PCI=y
# CONFIG_PCIE_LANTIQ is not set
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_LANTIQ=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_RTL8306_PHY=y
CONFIG_RTL8366S_PHY=y
CONFIG_RTL8367B_PHY=y
@@ -43,6 +46,5 @@ CONFIG_USB=y
CONFIG_USB_COMMON=y
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/lantiq/xway_legacy/config-4.14 b/target/linux/lantiq/xway_legacy/config-4.14
index c8aa631..feb82c5 100644
--- a/target/linux/lantiq/xway_legacy/config-4.14
+++ b/target/linux/lantiq/xway_legacy/config-4.14
@@ -2,6 +2,7 @@ CONFIG_ADM6996_PHY=y
CONFIG_AR8216_PHY=y
CONFIG_BLK_MQ_PCI=y
CONFIG_CRC16=y
+CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_FIRMWARE_IN_KERNEL=y
@@ -24,6 +25,8 @@ CONFIG_PCI=y
# CONFIG_PCIE_LANTIQ is not set
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_LANTIQ=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_RTL8306_PHY=y
CONFIG_RTL8366S_PHY=y
CONFIG_RTL8367B_PHY=y
@@ -32,6 +35,5 @@ CONFIG_USB=y
CONFIG_USB_COMMON=y
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y
More information about the lede-commits
mailing list