[openwrt/openwrt] imx6: remove support for 4.9

LEDE Commits lede-commits at lists.infradead.org
Mon Feb 19 00:33:45 PST 2018


blogic pushed a commit to openwrt/openwrt.git, branch master:
https://git.lede-project.org/1188f35a986a78475819bc5550a8a7bc2d21b16c

commit 1188f35a986a78475819bc5550a8a7bc2d21b16c
Author: Tim Harvey <tharvey at gateworks.com>
AuthorDate: Thu Feb 15 08:34:38 2018 -0800

    imx6: remove support for 4.9
    
    Signed-off-by: Tim Harvey <tharvey at gateworks.com>
    Tested-by: Koen Vandeputte <koen.vandeputte at ncentric.com>
---
 target/linux/imx6/config-4.9                       | 497 ----------------
 .../files-4.9/arch/arm/boot/dts/imx6dl-gw5904.dts  |  19 -
 .../files-4.9/arch/arm/boot/dts/imx6q-gw5904.dts   |  23 -
 .../arch/arm/boot/dts/imx6qdl-gw5904.dtsi          | 629 ---------------------
 ...-imx-add-gateworks-ventana-gw5904-support.patch |  18 -
 target/linux/imx6/patches-4.9/100-bootargs.patch   |  11 -
 .../linux/imx6/patches-4.9/200-disable-msi.patch   |  22 -
 .../imx6/patches-4.9/210-disable-uart-dma.patch    |  23 -
 8 files changed, 1242 deletions(-)

diff --git a/target/linux/imx6/config-4.9 b/target/linux/imx6/config-4.9
deleted file mode 100644
index 12ba566..0000000
--- a/target/linux/imx6/config-4.9
+++ /dev/null
@@ -1,497 +0,0 @@
-CONFIG_AHCI_IMX=y
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MULTIPLATFORM=y
-# CONFIG_ARCH_MULTI_CPU_AUTO is not set
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_MXC=y
-CONFIG_ARCH_NR_GPIO=0
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_CRYPTO=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_ERRATA_775420=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_IMX6Q_CPUFREQ=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_LPAE is not set
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ASN1=y
-CONFIG_ASSOCIATIVE_ARRAY=y
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_IMX_GPT=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLKSRC_OF=y
-CONFIG_CLKSRC_PROBE=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CLZ_TAB=y
-CONFIG_COMMON_CLK=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-# CONFIG_CRASHLOG is not set
-CONFIG_CRC16=y
-CONFIG_CRYPTO_ABLK_HELPER=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_AES_ARM=y
-CONFIG_CRYPTO_AES_ARM_BS=y
-# CONFIG_CRYPTO_AES_ARM_CE is not set
-CONFIG_CRYPTO_AKCIPHER=y
-CONFIG_CRYPTO_AKCIPHER2=y
-CONFIG_CRYPTO_AUTHENC=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRYPTD=y
-CONFIG_CRYPTO_CTR=y
-CONFIG_CRYPTO_CTS=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DEV_FSL_CAAM=y
-CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API=y
-CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API=y
-# CONFIG_CRYPTO_DEV_FSL_CAAM_DEBUG is not set
-CONFIG_CRYPTO_DEV_FSL_CAAM_IMX=y
-# CONFIG_CRYPTO_DEV_FSL_CAAM_INTC is not set
-CONFIG_CRYPTO_DEV_FSL_CAAM_JR=y
-CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API=y
-CONFIG_CRYPTO_DEV_FSL_CAAM_RINGSIZE=9
-CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API=y
-# CONFIG_CRYPTO_DEV_MXC_SCC is not set
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_GF128MUL=y
-# CONFIG_CRYPTO_GHASH_ARM_CE is not set
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_RSA=y
-CONFIG_CRYPTO_SEQIV=y
-# CONFIG_CRYPTO_SHA1_ARM_CE is not set
-# CONFIG_CRYPTO_SHA1_ARM_NEON is not set
-CONFIG_CRYPTO_SHA256=y
-# CONFIG_CRYPTO_SHA256_ARM is not set
-# CONFIG_CRYPTO_SHA2_ARM_CE is not set
-# CONFIG_CRYPTO_SHA512_ARM is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CRYPTO_XTS=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_IMX_UART_PORT=1
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-# CONFIG_DEBUG_UART_8250 is not set
-# CONFIG_DEBUG_USER is not set
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_DECOMPRESS_XZ=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DTC=y
-CONFIG_E1000E=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-CONFIG_ENCRYPTED_KEYS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT4_ENCRYPTION=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_ENCRYPTION=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_EXTCON=y
-CONFIG_FEC=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FRAME_POINTER=y
-CONFIG_FS_ENCRYPTION=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FTRACE=y
-# CONFIG_FTRACE_SYSCALLS is not set
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-# CONFIG_GIANFAR is not set
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_MXC=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCA953X_IRQ=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_SMCCC=y
-CONFIG_HAVE_ARM_TWD=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CBPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IMX_ANATOP=y
-CONFIG_HAVE_IMX_GPC=y
-CONFIG_HAVE_IMX_MMDC=y
-CONFIG_HAVE_IMX_SRC=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HWMON=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IMX=y
-CONFIG_IMX2_WDT=y
-CONFIG_IMX_DMA=y
-CONFIG_IMX_SDMA=y
-CONFIG_IMX_THERMAL=y
-# CONFIG_IMX_WEIM is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IOMMU_HELPER=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-# CONFIG_JFFS2_FS is not set
-CONFIG_KEYS=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MICREL_PHY=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_MXC is not set
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ESDHC_IMX=y
-CONFIG_MMC_SDHCI_IO_ACCESSORS=y
-CONFIG_MMC_SDHCI_OF_ESDHC=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-# CONFIG_MMC_TIFM_SD is not set
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MPILIB=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_GPMI_NAND=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-# CONFIG_MX3_IPU is not set
-CONFIG_MXS_DMA=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_HWMON=y
-CONFIG_NET_DSA_MV88E6XXX=y
-CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y
-CONFIG_NET_DSA_TAG_DSA=y
-CONFIG_NET_DSA_TAG_EDSA=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_PTP_CLASSIFY=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NR_CPUS=4
-CONFIG_NVMEM=y
-CONFIG_NVMEM_IMX_OCOTP=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_DW=y
-CONFIG_PCIE_PME=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_IMX6=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX=y
-CONFIG_PINCTRL_IMX6Q=y
-CONFIG_PINCTRL_IMX6SL=y
-CONFIG_PINCTRL_IMX6SX=y
-CONFIG_PINCTRL_IMX6UL=y
-# CONFIG_PL310_ERRATA_588369 is not set
-# CONFIG_PL310_ERRATA_727915 is not set
-# CONFIG_PL310_ERRATA_753970 is not set
-CONFIG_PL310_ERRATA_769419=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_GENERIC_DOMAINS=y
-CONFIG_PM_GENERIC_DOMAINS_OF=y
-CONFIG_PM_OPP=y
-CONFIG_PPS=y
-# CONFIG_PROBE_EVENTS is not set
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_PWM=y
-CONFIG_PWM_IMX=y
-CONFIG_PWM_SYSFS=y
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_GZIP=y
-CONFIG_RD_LZO=y
-CONFIG_RD_XZ=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_ANATOP=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_LTC3676=y
-CONFIG_REGULATOR_PFUZE100=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_CMOS is not set
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_DS1672=y
-# CONFIG_RTC_DRV_IMXDI is not set
-# CONFIG_RTC_DRV_MXC is not set
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_SCHED_INFO is not set
-CONFIG_SCSI=y
-CONFIG_SENSORS_AD7418=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SOC_BUS=y
-# CONFIG_SOC_IMX50 is not set
-# CONFIG_SOC_IMX51 is not set
-# CONFIG_SOC_IMX53 is not set
-CONFIG_SOC_IMX6=y
-CONFIG_SOC_IMX6Q=y
-CONFIG_SOC_IMX6SL=y
-CONFIG_SOC_IMX6SX=y
-CONFIG_SOC_IMX6UL=y
-# CONFIG_SOC_IMX7D is not set
-# CONFIG_SOC_LS1021A is not set
-# CONFIG_SOC_VF610 is not set
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_IMX=y
-CONFIG_SPI_MASTER=y
-CONFIG_SRAM=y
-CONFIG_SRCU=y
-CONFIG_STMP_DEVICE=y
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_OF=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TREE_RCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_USB=y
-CONFIG_USB_CHIPIDEA=y
-CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_CHIPIDEA_OF=y
-CONFIG_USB_CHIPIDEA_UDC=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-# CONFIG_USB_EHCI_MXC is not set
-CONFIG_USB_EHCI_PCI=y
-CONFIG_USB_GADGET=y
-# CONFIG_USB_IMX21_HCD is not set
-CONFIG_USB_MXS_PHY=y
-CONFIG_USB_OTG=y
-CONFIG_USB_PHY=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_USE_OF=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_VMSPLIT_2G=y
-# CONFIG_VMSPLIT_3G is not set
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/imx6/files-4.9/arch/arm/boot/dts/imx6dl-gw5904.dts b/target/linux/imx6/files-4.9/arch/arm/boot/dts/imx6dl-gw5904.dts
deleted file mode 100644
index 2318a55..0000000
--- a/target/linux/imx6/files-4.9/arch/arm/boot/dts/imx6dl-gw5904.dts
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw5904.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5904";
-	compatible = "gw,imx6dl-gw5904", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/target/linux/imx6/files-4.9/arch/arm/boot/dts/imx6q-gw5904.dts b/target/linux/imx6/files-4.9/arch/arm/boot/dts/imx6q-gw5904.dts
deleted file mode 100644
index 357dd7e..0000000
--- a/target/linux/imx6/files-4.9/arch/arm/boot/dts/imx6q-gw5904.dts
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw5904.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW5904";
-	compatible = "gw,imx6q-gw5904", "gw,ventana", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/target/linux/imx6/files-4.9/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/target/linux/imx6/files-4.9/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
deleted file mode 100644
index 4503f2c..0000000
--- a/target/linux/imx6/files-4.9/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
+++ /dev/null
@@ -1,629 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	/* these are used by bootloader for disabling nodes */
-	aliases {
-		led0 = &led0;
-		led1 = &led1;
-		led2 = &led2;
-		usb0 = &usbh1;
-		usb1 = &usbotg;
-	};
-
-	chosen {
-		bootargs = "console=ttymxc1,115200";
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led0: user1 {
-			label = "user1";
-			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: user2 {
-			label = "user2";
-			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
-			default-state = "off";
-		};
-
-		led2: user3 {
-			label = "user3";
-			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
-			default-state = "off";
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		user_pb {
-			label = "user_pb";
-
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
-			linux,code = <256>;
-		};
-	};
-
-	memory {
-		reg = <0x10000000 0x40000000>;
-	};
-
-	pps {
-		compatible = "pps-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pps>;
-		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
-
-	reg_1p0v: regulator-1p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P0V";
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <1000000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_usb_h1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	dsa {
-		compatible = "marvell,dsa";
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		dsa,ethernet = <&fec>;
-		dsa,mii-bus = <&mdio>;
-
-		switch at 0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0 0>; /* MDIO address 0, switch 0 in tree */
-
-			port at 0 {
-				reg = <0>;
-				label = "lan4";
-			};
-
-			port at 1 {
-				reg = <1>;
-				label = "lan3";
-			};
-
-			port at 2 {
-				reg = <2>;
-				label = "lan2";
-			};
-
-			port at 3 {
-				reg = <3>;
-				label = "lan1";
-			};
-
-			port at 5 {
-				reg = <5>;
-				label = "cpu";
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-		};
-	};
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	status = "okay";
-
-	mdio: mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	eeprom1: eeprom at 50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	eeprom2: eeprom at 51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-
-	eeprom3: eeprom at 52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	eeprom4: eeprom at 53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-
-	gsc: gsc at 20 {
-		compatible = "gw,gsc";
-		reg = <0x20>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <4 1>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-
-		/* GSC watchdog */
-		watchdog {
-			compatible = "gw,gsc_wdt";
-			status = "okay";
-		};
-
-		/* Linux input events from GSC interrupt events */
-		input {
-			compatible = "gw,gsc_input";
-			interrupt-parent = <&gsc>;
-			interrupts = <0 1 2 5 7>;
-			interrupt-names = "button", "key-erased", "eeprom-wp", "tamper", "button-held";
-			status = "okay";
-		};
-	};
-
-	gsc_gpio: pca9555 at 23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gsc>;
-		interrupts = <4>;
-	};
-
-	gsc_hwmon: hwmon at 29 {
-		compatible = "gw,gsc_hwmon";
-		reg = <0x29>;
-	};
-
-	gsc_rtc: ds1672 at 68 {
-		compatible = "dallas,ds1672";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	/* LSM9DS1 magnetic sensor */
-	lsm9ds1-m at 0x1c {
-		compatible = "st,lsm9ds1-mag";
-		reg = <0x1C>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_imu_mag>;
-		gpios = <&gpio5 17 GPIO_ACTIVE_LOW>; /* IRQ */
-		rot-matrix = /bits/ 16 <(1) (0) (0)
-			(0) (1) (0)
-			(0) (0) (1)>;
-		poll-interval = <100>;
-		min-interval = <13>;
-		fs-range = <0>;
-	};
-
-	/* LSM9DS1 accelerometer/gyroscope sensor */
-	lsm9ds1-ag at 0x6a {
-		compatible = "st,lsm9ds1-acc-gyr";
-		reg = <0x6A>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_imu_acc>;
-		gpios = <&gpio4 18 GPIO_ACTIVE_LOW>, /* INT1 */
-		        <&gpio4 19 GPIO_ACTIVE_LOW>; /* INT2 */
-		rot-matrix = /bits/ 16 <(1) (0) (0)
-			(0) (1) (0)
-			(0) (0) (1)>;
-		g-poll-interval = <100>;
-		g-min-interval = <2>;
-		g-fs-range = <0>;
-		x-poll-interval = <100>;
-		x-min-interval = <1>;
-		x-fs-range = <0>;
-		aa-filter-bw = <0>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	touchscreen: egalax_ts at 04 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel at 0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-			};
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
-	status = "disabled";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
-	status = "disabled";
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	fsl,uart-has-rtscts;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	fsl,uart-has-rtscts;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	non-removable;
-	vmmc-supply = <&reg_3p3v>;
-	keep-power-in-suspend;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	imx6qdl-gw5904 {
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x4001b0b0 /* PHY_RST# */
-			>;
-		};
-
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
-				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_imu_acc: gpioimxaccgrp {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_PIN2__GPIO4_IO18	0x1b0b0 /* INT1 */
-				MX6QDL_PAD_DI0_PIN3__GPIO4_IO19	0x1b0b0 /* INT2 */
-			>;
-		};
-
-		pinctrl_imu_mag: gpioimxmaggrp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 /* IRQ */
-				MX6QDL_PAD_DI0_PIN4__GPIO4_IO20    0x1b0b0 /* data ready */
-			>;
-		};
-
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__GPIO1_IO00	0x1b0b0 /* PCIE RST */
-			>;
-		};
-
-		pinctrl_pmic: pmicgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_8__GPIO1_IO08	0x1b0b0 /* PMIC_IRQ# */
-			>;
-		};
-
-		pinctrl_pps: ppsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm2: pwm2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm4: pwm4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D23__UART3_CTS_B         0x1b0b1
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA       0x1b0b1
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA       0x1b0b1
-				MX6QDL_PAD_EIM_D31__UART3_RTS_B         0x1b0b1
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA    0x1b0b1
-				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA    0x1b0b1
-				MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B      0x1b0b1
-				MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B      0x1b0b1
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
-				MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* OC */
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_RST__SD3_RESET		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
-				MX6QDL_PAD_SD3_RST__SD3_RESET		0x100b9
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170b9
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170b9
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170b9
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170b9
-			>;
-		};
-
-		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
-				MX6QDL_PAD_SD3_RST__SD3_RESET		0x100f9
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170f9
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170f9
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170f9
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170f9
-			>;
-		};
-
-		pinctrl_wdog: wdoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
-			>;
-		};
-	};
-};
diff --git a/target/linux/imx6/patches-4.9/0001-arm-dts-imx-add-gateworks-ventana-gw5904-support.patch b/target/linux/imx6/patches-4.9/0001-arm-dts-imx-add-gateworks-ventana-gw5904-support.patch
deleted file mode 100644
index 1bfbf99..0000000
--- a/target/linux/imx6/patches-4.9/0001-arm-dts-imx-add-gateworks-ventana-gw5904-support.patch
+++ /dev/null
@@ -1,18 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -339,6 +339,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
- 	imx6dl-gw551x.dtb \
- 	imx6dl-gw552x.dtb \
- 	imx6dl-gw553x.dtb \
-+	imx6dl-gw5904.dtb \
- 	imx6dl-hummingboard.dtb \
- 	imx6dl-nit6xlite.dtb \
- 	imx6dl-nitrogen6x.dtb \
-@@ -379,6 +380,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
- 	imx6q-gw551x.dtb \
- 	imx6q-gw552x.dtb \
- 	imx6q-gw553x.dtb \
-+	imx6q-gw5904.dtb \
- 	imx6q-h100.dtb \
- 	imx6q-hummingboard.dtb \
- 	imx6q-icore-rqs.dtb \
diff --git a/target/linux/imx6/patches-4.9/100-bootargs.patch b/target/linux/imx6/patches-4.9/100-bootargs.patch
deleted file mode 100644
index 0954391..0000000
--- a/target/linux/imx6/patches-4.9/100-bootargs.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/arm/boot/dts/imx6dl-wandboard.dts
-+++ b/arch/arm/boot/dts/imx6dl-wandboard.dts
-@@ -19,4 +19,8 @@
- 	memory {
- 		reg = <0x10000000 0x40000000>;
- 	};
-+
-+	chosen {
-+		bootargs = "console=ttymxc0,115200";
-+	};
- };
diff --git a/target/linux/imx6/patches-4.9/200-disable-msi.patch b/target/linux/imx6/patches-4.9/200-disable-msi.patch
deleted file mode 100644
index 290147c..0000000
--- a/target/linux/imx6/patches-4.9/200-disable-msi.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-The IMX6 PCIe host controller does not fire legacy interrupts when MSI is
-enabled. A patch is being worked on upstream to only enable MSI at runtime
-when needed, but until that is ready we will allow MSI to be disabled.
-
---- a/drivers/pci/host/Kconfig
-+++ b/drivers/pci/host/Kconfig
-@@ -51,7 +51,6 @@ config PCIE_DW_PLAT
- 
- config PCIE_DW
- 	bool
--	depends on PCI_MSI_IRQ_DOMAIN
- 
- config PCI_EXYNOS
- 	bool "Samsung Exynos PCIe controller"
-@@ -63,7 +62,6 @@ config PCI_EXYNOS
- config PCI_IMX6
- 	bool "Freescale i.MX6 PCIe controller"
- 	depends on SOC_IMX6Q
--	depends on PCI_MSI_IRQ_DOMAIN
- 	select PCIEPORTBUS
- 	select PCIE_DW
- 
diff --git a/target/linux/imx6/patches-4.9/210-disable-uart-dma.patch b/target/linux/imx6/patches-4.9/210-disable-uart-dma.patch
deleted file mode 100644
index 6abbb93..0000000
--- a/target/linux/imx6/patches-4.9/210-disable-uart-dma.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-Based on following upstream patch by Tim Harvey (Gateworks):
-
-https://github.com/Gateworks/openwrt/commit/80a01b6582f94c4547f39d3a25e0a1e9b6eb9877
-
-TX complete DMA messages are getting missed.
-This is also currently an issue in mainline.
-For now we will disable DMA in serial/imx.c.
-
-This resolves an issue encountered with RS485 transmit.
-
---- a/drivers/tty/serial/imx.c
-+++ b/drivers/tty/serial/imx.c
-@@ -1268,10 +1268,6 @@ static int imx_startup(struct uart_port
- 
- 	writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);
- 
--	/* Can we enable the DMA support? */
--	if (!uart_console(port) && !sport->dma_is_inited)
--		imx_uart_dma_init(sport);
--
- 	spin_lock_irqsave(&sport->port.lock, flags);
- 	/* Reset fifo's and state machines */
- 	i = 100;



More information about the lede-commits mailing list