[openwrt/openwrt] packages: uboot-mxs: bump to 2017.11

LEDE Commits lede-commits at lists.infradead.org
Tue Feb 13 01:02:36 PST 2018


blogic pushed a commit to openwrt/openwrt.git, branch master:
https://git.lede-project.org/dc263cd125f9ea58b797d888ea39118059ba5da0

commit dc263cd125f9ea58b797d888ea39118059ba5da0
Author: Michael Heimpold <mhei at heimpold.de>
AuthorDate: Sat Feb 10 14:05:10 2018 +0100

    packages: uboot-mxs: bump to 2017.11
    
    Also update the U-Boot BSP patch for I2SE Duckbill devices.
    
    Signed-off-by: Michael Heimpold <mhei at heimpold.de>
---
 package/boot/uboot-mxs/Makefile                    |   4 +-
 .../uboot-mxs/patches/001-add-i2se-duckbill.patch  | 408 +++++++++++++++------
 2 files changed, 292 insertions(+), 120 deletions(-)

diff --git a/package/boot/uboot-mxs/Makefile b/package/boot/uboot-mxs/Makefile
index 92cf9e6..cd752bb 100644
--- a/package/boot/uboot-mxs/Makefile
+++ b/package/boot/uboot-mxs/Makefile
@@ -8,10 +8,10 @@
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
-PKG_VERSION:=2016.01
+PKG_VERSION:=2017.11
 PKG_RELEASE:=1
 
-PKG_HASH:=e5792fba9399d9804aa2ef667f14ff771e2cdece72367d340250265bf095a5d5
+PKG_HASH:=6a018fd3caf58f3dcfa23ee989a82bd35df03af71872b9dca8c6d758a0d26c05
 
 include $(INCLUDE_DIR)/u-boot.mk
 include $(INCLUDE_DIR)/package.mk
diff --git a/package/boot/uboot-mxs/patches/001-add-i2se-duckbill.patch b/package/boot/uboot-mxs/patches/001-add-i2se-duckbill.patch
index 91f583f..15217b5 100644
--- a/package/boot/uboot-mxs/patches/001-add-i2se-duckbill.patch
+++ b/package/boot/uboot-mxs/patches/001-add-i2se-duckbill.patch
@@ -1,20 +1,40 @@
-From 4d9a32780ec795b9edc83c7b3a1e947cec49a5a4 Mon Sep 17 00:00:00 2001
+From 25de6430219d3f3698d709c10358fbea17b24cf1 Mon Sep 17 00:00:00 2001
 From: Michael Heimpold <mhei at heimpold.de>
-Date: Sat, 15 Aug 2015 20:26:18 +0200
-Subject: [PATCH] Add support for I2SE Duckbill boards
+Date: Fri, 21 Apr 2017 11:08:19 +0200
+Subject: [PATCH] arm: mxs: add support for I2SE's Duckbill boards
+
+The Duckbill devices are small, pen-drive sized boards based on
+NXP's i.MX28 SoC. While the initial variants (Duckbill series) were
+equipped with a micro SD card slot only, the latest generation
+(Duckbill 2 series) have an additional internal eMMC onboard.
+
+Both device generations consists of four "family members":
+
+- Duckbill/Duckbill 2: generic board, intended to be used as
+  baseboard for custom designs and/or as development board
+
+- Duckbill EnOcean/Duckbill 2 EnOcean: come with an EnOcean
+  daugther board equipped with the popular TCM310 module
+
+- Duckbill 485/Duckbill 2 485: as the name implies, these
+  devices are intended to be used as Ethernet - RS485 converters
+
+- Duckbill SPI/Duckbill 2 SPI: not sold separately, but used
+  in I2SE's development kits for Green PHY HomePlug Powerline
+  communication
 
 Signed-off-by: Michael Heimpold <mhei at heimpold.de>
+Signed-off-by: Stefan Wahren <stefan.wahren at i2se.com>
 ---
- arch/arm/Kconfig                  |    6 ++
- arch/arm/include/asm/mach-types.h |   13 +++
- board/i2se/duckbill/Kconfig       |   15 ++++
- board/i2se/duckbill/MAINTAINERS   |    6 ++
- board/i2se/duckbill/Makefile      |   12 +++
- board/i2se/duckbill/duckbill.c    |  112 +++++++++++++++++++++++
- board/i2se/duckbill/iomux.c       |  125 ++++++++++++++++++++++++++
- configs/duckbill_defconfig        |    9 ++
- include/configs/duckbill.h        |  177 +++++++++++++++++++++++++++++++++++++
- 9 files changed, 475 insertions(+)
+ arch/arm/Kconfig                |   9 +-
+ board/i2se/duckbill/Kconfig     |  15 +++
+ board/i2se/duckbill/MAINTAINERS |   6 ++
+ board/i2se/duckbill/Makefile    |  12 +++
+ board/i2se/duckbill/duckbill.c  | 181 ++++++++++++++++++++++++++++++++++++
+ board/i2se/duckbill/iomux.c     | 157 +++++++++++++++++++++++++++++++
+ configs/duckbill_defconfig      |  31 +++++++
+ include/configs/duckbill.h      | 199 ++++++++++++++++++++++++++++++++++++++++
+ 8 files changed, 609 insertions(+), 1 deletion(-)
  create mode 100644 board/i2se/duckbill/Kconfig
  create mode 100644 board/i2se/duckbill/MAINTAINERS
  create mode 100644 board/i2se/duckbill/Makefile
@@ -23,57 +43,43 @@ Signed-off-by: Michael Heimpold <mhei at heimpold.de>
  create mode 100644 configs/duckbill_defconfig
  create mode 100644 include/configs/duckbill.h
 
+diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
+index 30e71b2..b77e778 100644
 --- a/arch/arm/Kconfig
 +++ b/arch/arm/Kconfig
-@@ -178,6 +178,11 @@ config TARGET_MX28EVK
- 	select CPU_ARM926EJS
+@@ -373,6 +373,12 @@ config TARGET_MX28EVK
  	select SUPPORT_SPL
+ 	select BOARD_EARLY_INIT_F
  
 +config TARGET_DUCKBILL
-+	bool "Support I2SE Duckbill"
++	bool "Support duckbill"
 +	select CPU_ARM926EJS
 +	select SUPPORT_SPL
++	select BOARD_EARLY_INIT_F
 +
  config TARGET_MX23_OLINUXINO
  	bool "Support mx23_olinuxino"
  	select CPU_ARM926EJS
-@@ -926,6 +931,7 @@ source "board/genesi/mx51_efikamx/Kconfi
- source "board/gumstix/pepper/Kconfig"
+@@ -1250,6 +1256,7 @@ source "board/gumstix/pepper/Kconfig"
  source "board/h2200/Kconfig"
  source "board/hisilicon/hikey/Kconfig"
+ source "board/hisilicon/poplar/Kconfig"
 +source "board/i2se/duckbill/Kconfig"
  source "board/imx31_phycore/Kconfig"
- source "board/isee/igep0033/Kconfig"
- source "board/maxbcm/Kconfig"
---- a/arch/arm/include/asm/mach-types.h
-+++ b/arch/arm/include/asm/mach-types.h
-@@ -1109,6 +1109,7 @@ extern unsigned int __machine_arch_type;
- #define MACH_TYPE_COLIBRI_T30          4493
- #define MACH_TYPE_APALIS_T30           4513
- #define MACH_TYPE_OMAPL138_LCDK        2495
-+#define MACH_TYPE_DUCKBILL             4754
+ source "board/isee/igep003x/Kconfig"
+ source "board/olimex/mx23_olinuxino/Kconfig"
+@@ -1279,7 +1286,7 @@ source "arch/arm/Kconfig.debug"
+ endmenu
  
- #ifdef CONFIG_ARCH_EBSA110
- # ifdef machine_arch_type
-@@ -14262,6 +14263,18 @@ extern unsigned int __machine_arch_type;
- # define machine_is_apalis_t30()	(0)
- #endif
+ config SPL_LDSCRIPT
+-        default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if TARGET_APX4DEVKIT || TARGET_BG0900 || TARGET_M28EVK || TARGET_MX23_OLINUXINO || TARGET_MX23EVK || TARGET_MX28EVK || TARGET_SANSA_FUZE_PLUS || TARGET_SC_SPS_1 || TARGET_TS4600 || TARGET_XFI3
++        default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if TARGET_APX4DEVKIT || TARGET_BG0900 || TARGET_M28EVK || TARGET_MX23_OLINUXINO || TARGET_MX23EVK || TARGET_MX28EVK || TARGET_DUCKBILL || TARGET_SANSA_FUZE_PLUS || TARGET_SC_SPS_1 || TARGET_TS4600 || TARGET_XFI3
+         default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136
+ 	default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64
  
-+#ifdef CONFIG_MACH_DUCKBILL
-+# ifdef machine_arch_type
-+#  undef machine_arch_type
-+#  define machine_arch_type	__machine_arch_type
-+# else
-+#  define machine_arch_type	MACH_TYPE_DUCKBILL
-+# endif
-+# define machine_is_duckbill()	(machine_arch_type == MACH_TYPE_DUCKBILL)
-+#else
-+# define machine_is_duckbill()	(0)
-+#endif
-+
- /*
-  * These have not yet been registered
-  */
+diff --git a/board/i2se/duckbill/Kconfig b/board/i2se/duckbill/Kconfig
+new file mode 100644
+index 0000000..98c1e46
 --- /dev/null
 +++ b/board/i2se/duckbill/Kconfig
 @@ -0,0 +1,15 @@
@@ -92,6 +98,9 @@ Signed-off-by: Michael Heimpold <mhei at heimpold.de>
 +	default "duckbill"
 +
 +endif
+diff --git a/board/i2se/duckbill/MAINTAINERS b/board/i2se/duckbill/MAINTAINERS
+new file mode 100644
+index 0000000..5496baa
 --- /dev/null
 +++ b/board/i2se/duckbill/MAINTAINERS
 @@ -0,0 +1,6 @@
@@ -101,11 +110,14 @@ Signed-off-by: Michael Heimpold <mhei at heimpold.de>
 +F:	board/i2se/duckbill/
 +F:	include/configs/duckbill.h
 +F:	configs/duckbill_defconfig
+diff --git a/board/i2se/duckbill/Makefile b/board/i2se/duckbill/Makefile
+new file mode 100644
+index 0000000..66baec4
 --- /dev/null
 +++ b/board/i2se/duckbill/Makefile
 @@ -0,0 +1,12 @@
 +#
-+# (C) Copyright 2014-2015
++# (C) Copyright 2014-2017
 +# Michael Heimpold, mhei at heimpold.de.
 +#
 +# SPDX-License-Identifier:	GPL-2.0+
@@ -116,13 +128,16 @@ Signed-off-by: Michael Heimpold <mhei at heimpold.de>
 +else
 +obj-y	:= iomux.o
 +endif
+diff --git a/board/i2se/duckbill/duckbill.c b/board/i2se/duckbill/duckbill.c
+new file mode 100644
+index 0000000..caeb903
 --- /dev/null
 +++ b/board/i2se/duckbill/duckbill.c
-@@ -0,0 +1,112 @@
+@@ -0,0 +1,181 @@
 +/*
 + * I2SE Duckbill board
 + *
-+ * (C) Copyright 2014-2015 Michael Heimpold <mhei at heimpold.de>
++ * (C) Copyright 2014-2017 Michael Heimpold <mhei at heimpold.de>
 + *
 + * SPDX-License-Identifier:	GPL-2.0+
 + */
@@ -134,17 +149,19 @@ Signed-off-by: Michael Heimpold <mhei at heimpold.de>
 +#include <asm/arch/iomux-mx28.h>
 +#include <asm/arch/clock.h>
 +#include <asm/arch/sys_proto.h>
++#include <asm/setup.h>
++#include <fdt_support.h>
 +#include <linux/mii.h>
 +#include <miiphy.h>
 +#include <netdev.h>
 +#include <errno.h>
-+
-+#define GPIO_PHY_RESET MX28_PAD_SSP0_DATA7__GPIO_2_7
-+#define GPIO_LED_GREEN MX28_PAD_AUART1_TX__GPIO_3_5
-+#define GPIO_LED_RED   MX28_PAD_AUART1_RX__GPIO_3_4
++#include <fuse.h>
 +
 +DECLARE_GLOBAL_DATA_PTR;
 +
++static u32 system_rev;
++static u32 serialno;
++
 +/*
 + * Functions
 + */
@@ -184,14 +201,20 @@ Signed-off-by: Michael Heimpold <mhei at heimpold.de>
 +#ifdef	CONFIG_CMD_NET
 +int board_eth_init(bd_t *bis)
 +{
++	unsigned int reset_gpio;
 +	int ret;
 +
 +	ret = cpu_eth_init(bis);
 +
++	if (system_rev == 1)
++		reset_gpio = MX28_PAD_SSP0_DATA7__GPIO_2_7;
++	else
++		reset_gpio = MX28_PAD_GPMI_ALE__GPIO_0_26;
++
 +	/* Reset PHY */
-+	gpio_direction_output(GPIO_PHY_RESET, 0);
++	gpio_direction_output(reset_gpio, 0);
 +	udelay(200);
-+	gpio_set_value(GPIO_PHY_RESET, 1);
++	gpio_set_value(reset_gpio, 1);
 +
 +	/* give PHY some time to get out of the reset */
 +	udelay(10000);
@@ -209,20 +232,81 @@ Signed-off-by: Michael Heimpold <mhei at heimpold.de>
 +{
 +	mac[0] = 0x00;
 +	mac[1] = 0x01;
++	mac[2] = 0x87;
++}
++#endif
++
++#ifdef CONFIG_OF_BOARD_SETUP
++int ft_board_setup(void *blob, bd_t *bd)
++{
++	uint8_t enetaddr[6];
++	u32 mac = 0;
++
++	enetaddr[0] = 0x00;
++	enetaddr[1] = 0x01;
++	enetaddr[2] = 0x87;
 +
-+	if (dev_id == 1) /* Let MAC1 be MAC0 + 1 by default */
-+		mac[5] += 1;
++#ifdef CONFIG_MXS_OCOTP
++	/* only Duckbill SPI has a MAC for the QCA7k */
++	fuse_read(0, 1, &mac);
++#endif
++
++	if (mac != 0) {
++		enetaddr[3] = (mac >> 16) & 0xff;
++		enetaddr[4] = (mac >>  8) & 0xff;
++		enetaddr[5] =  mac        & 0xff;
++
++		fdt_find_and_setprop(blob,
++		                     "/apb at 80000000/apbh at 80000000/ssp at 80014000/ethernet at 0",
++		                     "local-mac-address", enetaddr, 6, 1);
++	}
++
++	return 0;
++}
++#endif
++
++#ifdef CONFIG_REVISION_TAG
++u32 get_board_rev(void)
++{
++	return system_rev;
++}
++#endif
++
++#ifdef CONFIG_SERIAL_TAG
++void get_board_serial(struct tag_serialnr *serialnr)
++{
++	serialnr->low = serialno;
++	serialnr->high = 0;
 +}
 +#endif
 +
 +int misc_init_r(void)
 +{
-+	char *s = getenv("serial#");
++	unsigned int led_red_gpio;
++	char *s;
 +
-+	/* enable red LED to indicate a running bootloader */
-+	gpio_direction_output(GPIO_LED_RED, 1);
++	/* Board revision detection */
++	gpio_direction_input(MX28_PAD_LCD_D17__GPIO_1_17);
 +
-+	puts("Board: I2SE Duckbill\n");
++	/* MX28_PAD_LCD_D17__GPIO_1_17: v1 = pull-down, v2 = pull-up */
++	system_rev =
++		gpio_get_value(MX28_PAD_LCD_D17__GPIO_1_17);
++	system_rev += 1;
++
++	/* enable red LED to indicate a running bootloader */
++	if (system_rev == 1)
++		led_red_gpio = MX28_PAD_AUART1_RX__GPIO_3_4;
++	else
++		led_red_gpio = MX28_PAD_SAIF0_LRCLK__GPIO_3_21;
++	gpio_direction_output(led_red_gpio, 1);
++
++	if (system_rev == 1)
++		puts("Board: I2SE Duckbill\n");
++	else
++		puts("Board: I2SE Duckbill 2\n");
++
++	serialno = env_get_ulong("serial#", 10, 0);
++	s = env_get("serial#");
 +	if (s && s[0]) {
 +		puts("Serial: ");
 +		puts(s);
@@ -231,13 +315,16 @@ Signed-off-by: Michael Heimpold <mhei at heimpold.de>
 +
 +	return 0;
 +}
+diff --git a/board/i2se/duckbill/iomux.c b/board/i2se/duckbill/iomux.c
+new file mode 100644
+index 0000000..b3c4d92
 --- /dev/null
 +++ b/board/i2se/duckbill/iomux.c
-@@ -0,0 +1,125 @@
+@@ -0,0 +1,157 @@
 +/*
 + * I2SE Duckbill IOMUX setup
 + *
-+ * Copyright (C) 2013-2015 Michael Heimpold <mhei at heimpold.de>
++ * Copyright (C) 2013-2017 Michael Heimpold <mhei at heimpold.de>
 + *
 + * SPDX-License-Identifier:	GPL-2.0+
 + */
@@ -245,6 +332,7 @@ Signed-off-by: Michael Heimpold <mhei at heimpold.de>
 +#include <common.h>
 +#include <config.h>
 +#include <asm/io.h>
++#include <asm/gpio.h>
 +#include <asm/arch/iomux-mx28.h>
 +#include <asm/arch/imx-regs.h>
 +#include <asm/arch/sys_proto.h>
@@ -253,12 +341,13 @@ Signed-off-by: Michael Heimpold <mhei at heimpold.de>
 +#define	MUX_CONFIG_ENET	(MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
 +#define	MUX_CONFIG_EMI	(MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL)
 +
++/* For all revisions */
 +const iomux_cfg_t iomux_setup[] = {
 +	/* DUART */
 +	MX28_PAD_PWM0__DUART_RX,
 +	MX28_PAD_PWM1__DUART_TX,
 +
-+	/* SD card */
++	/* eMMC (v2) or SD card (v1) */
 +	MX28_PAD_SSP0_DATA0__SSP0_D0 | MUX_CONFIG_SSP0,
 +	MX28_PAD_SSP0_DATA1__SSP0_D1 | MUX_CONFIG_SSP0,
 +	MX28_PAD_SSP0_DATA2__SSP0_D2 | MUX_CONFIG_SSP0,
@@ -280,10 +369,6 @@ Signed-off-by: Michael Heimpold <mhei at heimpold.de>
 +	MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MUX_CONFIG_ENET,
 +	MX28_PAD_ENET_CLK__CLKCTRL_ENET | MUX_CONFIG_ENET,
 +
-+	/* PHY reset */
-+	MX28_PAD_SSP0_DATA7__GPIO_2_7 |
-+		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-+
 +	/* EMI */
 +	MX28_PAD_EMI_D00__EMI_DATA0 | MUX_CONFIG_EMI,
 +	MX28_PAD_EMI_D01__EMI_DATA1 | MUX_CONFIG_EMI,
@@ -336,11 +421,38 @@ Signed-off-by: Michael Heimpold <mhei at heimpold.de>
 +	MX28_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI,
 +	MX28_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI,
 +
++	/* Revision pin(s) */
++	MX28_PAD_LCD_D17__GPIO_1_17,
++};
++
++/* For revision 1 only */
++const iomux_cfg_t iomux_setup_v1[] = {
++	/* PHY reset */
++	MX28_PAD_SSP0_DATA7__GPIO_2_7 |
++		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
++
 +	/* LEDs */
 +	MX28_PAD_AUART1_RX__GPIO_3_4,
 +	MX28_PAD_AUART1_TX__GPIO_3_5,
 +};
 +
++/* For revision 2 only */
++const iomux_cfg_t iomux_setup_v2[] = {
++	/* eMMC (v2) */
++	MX28_PAD_SSP0_DATA4__SSP0_D4 | MUX_CONFIG_SSP0,
++	MX28_PAD_SSP0_DATA5__SSP0_D5 | MUX_CONFIG_SSP0,
++	MX28_PAD_SSP0_DATA6__SSP0_D6 | MUX_CONFIG_SSP0,
++	MX28_PAD_SSP0_DATA7__SSP0_D7 | MUX_CONFIG_SSP0,
++
++	/* PHY reset */
++	MX28_PAD_GPMI_ALE__GPIO_0_26 |
++		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
++
++	/* LEDs */
++	MX28_PAD_SAIF0_LRCLK__GPIO_3_21,
++	MX28_PAD_SAIF0_MCLK__GPIO_3_20,
++};
++
 +#define HW_DRAM_CTL29	(0x74 >> 2)
 +#define CS_MAP		0xf
 +#define COLUMN_SIZE	0x2
@@ -358,22 +470,57 @@ Signed-off-by: Michael Heimpold <mhei at heimpold.de>
 +void board_init_ll(const uint32_t arg, const uint32_t *resptr)
 +{
 +	mxs_common_spl_init(arg, resptr, iomux_setup, ARRAY_SIZE(iomux_setup));
++
++	gpio_direction_input(MX28_PAD_LCD_D17__GPIO_1_17);
++
++	if (gpio_get_value(MX28_PAD_LCD_D17__GPIO_1_17))
++		mxs_iomux_setup_multiple_pads(iomux_setup_v2, ARRAY_SIZE(iomux_setup_v2));
++	else
++		mxs_iomux_setup_multiple_pads(iomux_setup_v1, ARRAY_SIZE(iomux_setup_v1));
 +}
+diff --git a/configs/duckbill_defconfig b/configs/duckbill_defconfig
+new file mode 100644
+index 0000000..2adce92
 --- /dev/null
 +++ b/configs/duckbill_defconfig
-@@ -0,0 +1,9 @@
+@@ -0,0 +1,31 @@
 +CONFIG_ARM=y
 +CONFIG_TARGET_DUCKBILL=y
++CONFIG_SPL_GPIO_SUPPORT=y
++CONFIG_SPL_LIBCOMMON_SUPPORT=y
++CONFIG_SPL_LIBGENERIC_SUPPORT=y
++CONFIG_SPL_SERIAL_SUPPORT=y
++CONFIG_BOOTDELAY=1
++# CONFIG_CONSOLE_MUX is not set
++CONFIG_SYS_CONSOLE_IS_IN_ENV=y
++CONFIG_VERSION_VARIABLE=y
++# CONFIG_DISPLAY_BOARDINFO is not set
++# CONFIG_EFI_LOADER is not set
++CONFIG_ARCH_MISC_INIT=y
 +CONFIG_SPL=y
-+CONFIG_SYS_EXTRA_OPTIONS="ENV_IS_IN_MMC"
++CONFIG_HUSH_PARSER=y
++CONFIG_CMD_BOOTZ=y
 +# CONFIG_CMD_IMLS is not set
 +# CONFIG_CMD_FLASH is not set
-+# CONFIG_SPI_FLASH is not set
-+# CONFIG_CMD_FPGA is not set
++CONFIG_CMD_MMC=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_MII=y
 +CONFIG_CMD_PING=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_EXT4=y
++CONFIG_CMD_EXT4_WRITE=y
++CONFIG_CMD_FAT=y
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_ENV_IS_IN_MMC=y
++CONFIG_MMC_MXS=y
++CONFIG_OF_LIBFDT=y
+diff --git a/include/configs/duckbill.h b/include/configs/duckbill.h
+new file mode 100644
+index 0000000..f9374c6
 --- /dev/null
 +++ b/include/configs/duckbill.h
-@@ -0,0 +1,177 @@
+@@ -0,0 +1,199 @@
 +/*
 + * Copyright (C) 2014-2015 Michael Heimpold <mhei at heimpold.de>
 + *
@@ -391,22 +538,7 @@ Signed-off-by: Michael Heimpold <mhei at heimpold.de>
 +#define CONFIG_SYS_MXS_VDD5V_ONLY
 +
 +/* U-Boot Commands */
-+#define CONFIG_SYS_NO_FLASH
-+#define CONFIG_DISPLAY_CPUINFO
-+#define CONFIG_DOS_PARTITION
-+
-+#define CONFIG_CMD_BOOTZ
-+#define CONFIG_CMD_CACHE
-+#define CONFIG_CMD_DHCP
-+#define CONFIG_CMD_EXT4
-+#define CONFIG_CMD_EXT4_WRITE
-+#define CONFIG_CMD_FAT
 +#define CONFIG_CMD_FUSE
-+#define CONFIG_CMD_GPIO
-+#define CONFIG_CMD_I2C
-+#define CONFIG_CMD_MII
-+#define CONFIG_CMD_MMC
-+#define CONFIG_CMD_SPI
 +#define CONFIG_CMD_UNZIP
 +
 +/* Memory configuration */
@@ -417,7 +549,6 @@ Signed-off-by: Michael Heimpold <mhei at heimpold.de>
 +
 +/* Environment is in MMC */
 +#define CONFIG_ENV_OVERWRITE
-+#define CONFIG_ENV_IS_IN_MMC		1
 +#define CONFIG_ENV_SIZE			(128 * 1024)
 +#define CONFIG_ENV_OFFSET		(128 * 1024)
 +#define CONFIG_ENV_OFFSET_REDUND	(256 * 1024)
@@ -454,29 +585,70 @@ Signed-off-by: Michael Heimpold <mhei at heimpold.de>
 +#define CONFIG_BOOTFILE		"zImage"
 +#define CONFIG_LOADADDR		0x42000000
 +#define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
++#define CONFIG_REVISION_TAG
++#define CONFIG_SERIAL_TAG
++#define CONFIG_OF_BOARD_SETUP
++#define CONFIG_BOOT_RETRY_TIME		120	/* retry autoboot after 120 seconds */
++#define CONFIG_AUTOBOOT_KEYED
++#define CONFIG_AUTOBOOT_PROMPT		"Autobooting in %d seconds, " \
++					"press <c> to stop\n"
++#define CONFIG_AUTOBOOT_DELAY_STR	"\x63"	/* allows retry after retry time */
++#define CONFIG_AUTOBOOT_STOP_STR	" "	/* stop autoboot with <Space> */
++#define CONFIG_RESET_TO_RETRY			/* reset board to retry booting */
 +
 +/* Extra Environment */
 +#define CONFIG_EXTRA_ENV_SETTINGS \
-+	"update_sd_firmware_filename=openwrt-mxs-root.ext4\0" \
-+	"update_sd_firmware=" \
++	"mmc_part2_offset=1000\0" \
++	"mmc_part3_offset=19000\0" \
++	"update_openwrt_firmware_filename=openwrt-mxs-root.ext4\0" \
++	"update_openwrt_firmware=" \
 +		"if mmc rescan; then " \
-+		"if tftp ${update_sd_firmware_filename}; then " \
-+		"setexpr fw_sz ${filesize} / 200; " \
-+		"setexpr fw_sz ${fw_sz} + 1; " \
-+		"mmc dev ${mmcdev} 3; " \
-+		"mmc write ${loadaddr} 0 ${fw_sz}; " \
-+		"mmc dev ${mmcdev} 2; " \
-+		"mmc write ${loadaddr} 0 ${fw_sz}; " \
-+		"mmc dev ${mmcdev}; " \
-+		"fi; " \
++			"if tftp ${update_openwrt_firmware_filename}; then " \
++				"setexpr fw_sz ${filesize} + 1ff; " \
++				"setexpr fw_sz ${fw_sz} / 200; " \
++				"mmc write ${loadaddr} ${mmc_part2_offset} ${fw_sz}; " \
++				"mmc write ${loadaddr} ${mmc_part3_offset} ${fw_sz}; " \
++			"fi; " \
 +		"fi\0" \
++	"update_fw_filename_prefix=emmc.img.\0" \
++	"update_fw_filename_suffix=.gz\0" \
++	"update_fw_parts=0x6\0" \
++	"update_fw_fsize_uncompressed=4000000\0" \
++	"gzwrite_wbuf=100000\0" \
++	"update_emmc_firmware=" \
++		"setexpr i ${update_fw_parts}; setexpr error 0; " \
++		"while itest ${i} -gt 0; do " \
++			"echo Transfering firmware image part ${i} of ${update_fw_parts}; " \
++			"if itest ${i} -le 9; then " \
++				"setenv j 0${i}; " \
++			"else " \
++				"setenv j ${i}; " \
++			"fi; " \
++			"if tftp ${loadaddr} ${update_fw_basedir}${update_fw_filename_prefix}${j}${update_fw_filename_suffix}; then " \
++				"setexpr k ${i} - 1; " \
++				"setexpr offset ${update_fw_fsize_uncompressed} * ${k}; " \
++				"if gzwrite mmc ${mmcdev} ${loadaddr} ${filesize} ${gzwrite_wbuf} ${offset}; then " \
++					"setexpr i ${i} - 1; " \
++				"else " \
++					"setexpr i 0; " \
++					"setexpr error 1; " \
++				"fi; " \
++			"else " \
++				"setexpr i 0; " \
++				"setexpr error 1; " \
++			"fi; " \
++		"done; setenv i; setenv j; setenv k; setenv fsize; setenv filesize; setenv offset; " \
++		"if test ${error} -eq 1; then " \
++			"echo Firmware Update FAILED; " \
++		"else " \
++			"echo Firmware Update OK; " \
++		"fi; setenv error\0" \
 +	"erase_mmc=mmc erase 0 2\0" \
 +	"erase_env1=mmc erase 100 100\0" \
 +	"erase_env2=mmc erase 200 100\0" \
-+	"script=boot.scr\0" \
 +	"image=zImage\0" \
 +	"console=ttyAMA0\0" \
-+	"fdt_file=imx28-duckbill.dtb\0" \
++	"fdt_file=imx28-duckbill-2.dtb\0" \
 +	"fdt_addr=0x41000000\0" \
 +	"boot_fdt=try\0" \
 +	"ip_dyn=yes\0" \
@@ -487,10 +659,6 @@ Signed-off-by: Michael Heimpold <mhei at heimpold.de>
 +	"mmcargs=setenv bootargs console=${console},${baudrate} " \
 +		"root=${mmcroot} " \
 +		"rootwait bootsys=${bootsys} panic=1\0" \
-+	"loadbootscript="  \
-+		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-+	"bootscript=echo Running bootscript from mmc ...; "	\
-+		"source\0" \
 +	"loadimage=ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} /boot/${image}\0" \
 +	"loadfdt=ext4load mmc ${mmcdev}:${mmcpart} ${fdt_addr} /boot/${fdt_file}\0" \
 +	"mmcboot=echo Booting from mmc ...; " \
@@ -509,7 +677,8 @@ Signed-off-by: Michael Heimpold <mhei at heimpold.de>
 +			"fi; " \
 +		"else " \
 +			"bootz; " \
-+		"fi;\0" \
++		"fi\0" \
++	"nfsroot=/\0" \
 +	"netargs=setenv bootargs console=${console},${baudrate} " \
 +		"root=/dev/nfs " \
 +		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
@@ -521,7 +690,7 @@ Signed-off-by: Michael Heimpold <mhei at heimpold.de>
 +			"setenv get_cmd tftp; " \
 +		"fi; " \
 +		"${get_cmd} ${image}; " \
-+		"if test ${boot_fdt} = yes; then " \
++		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 +			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 +				"bootz ${loadaddr} - ${fdt_addr}; " \
 +			"else " \
@@ -533,21 +702,24 @@ Signed-off-by: Michael Heimpold <mhei at heimpold.de>
 +			"fi; " \
 +		"else " \
 +			"bootz; " \
-+		"fi;\0"
++		"fi\0"
 +
 +#define CONFIG_BOOTCOMMAND \
-+	"mmc dev ${mmcdev}; if mmc rescan; then " \
-+		"if run loadbootscript; then " \
-+			"run bootscript; " \
++	"mmc dev ${mmcdev}; " \
++	"if mmc rescan; then " \
++		"if run loadimage; then " \
++			"run mmcboot; " \
 +		"else " \
-+			"if run loadimage; then " \
-+				"run mmcboot; " \
-+			"else run netboot; " \
-+			"fi; " \
++			"run netboot; " \
 +		"fi; " \
-+	"else run netboot; fi"
++	"else " \
++		"run netboot; " \
++	"fi"
 +
 +/* The rest of the configuration is shared */
 +#include <configs/mxs.h>
 +
 +#endif /* __CONFIGS_DUCKBILL_H__ */
+-- 
+2.7.4
+



More information about the lede-commits mailing list