[openwrt/openwrt] ramips: add support for DLINK DWR-921-C3
LEDE Commits
lede-commits at lists.infradead.org
Wed Apr 4 00:16:35 PDT 2018
mkresin pushed a commit to openwrt/openwrt.git, branch master:
https://git.lede-project.org/8db84cc0ee70382ea7f861691f73252cc7d3dfb3
commit 8db84cc0ee70382ea7f861691f73252cc7d3dfb3
Author: Pawel Dembicki <paweldembicki at gmail.com>
AuthorDate: Thu Mar 22 21:47:17 2018 +0100
ramips: add support for DLINK DWR-921-C3
The DWR-921-C3 Wireless Routers with LTE embedded modem is based on the
MT7620N SoC.
Specification:
* MediaTek MT7620N (580 Mhz)
* 64 MB of RAM
* 16 MB of FLASH
* 802.11bgn radio
* 5x 10/100 Mbps Ethernet (1 WAN and 4 LAN)
* 2x external, detachable (LTE) antennas
* UART header on PCB (57600 8n1)
* 6x LED (GPIO-controlled)
* 1x bi-color Signal Strength LED (GPIO-controlled)
* 2x button
* JBOOT bootloader
Installation:
Apply factory image via d-link http web-gui.
How to revert to OEM firmware:
1.) Push the reset button and turn on the power. Wait until LED start
blinking (~10sec.)
2.) Upload original factory image via JBOOT http (IP: 192.168.123.254)
3.) If http doesn't work, it can be done with curl command:
curl -F FN=@XXXXX.bin http://192.168.123.254/upg
where XXXXX.bin is name of firmware file.
Signed-off-by: Pawel Dembicki <paweldembicki at gmail.com>
---
target/linux/ramips/image/mt7620.mk | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk
index 185a081..75cd818 100644
--- a/target/linux/ramips/image/mt7620.mk
+++ b/target/linux/ramips/image/mt7620.mk
@@ -178,6 +178,14 @@ define Device/dlink_dwr-921-c1
endef
TARGET_DEVICES += dlink_dwr-921-c1
+define Device/dlink_dwr-921-c3
+ $(Device/dlink_dwr-921-c1)
+ DEVICE_TITLE := D-Link DWR-921 C3
+ DLINK_ROM_ID := DLK6E2414009
+ SUPPORTED_DEVICES := dlink,dwr-921-c1
+endef
+TARGET_DEVICES += dlink_dwr-921-c3
+
define Device/e1700
DTS := E1700
IMAGES += factory.bin
More information about the lede-commits
mailing list